Struct std::ops::RangeFrom

1.0.0 · source ·
``````pub struct RangeFrom<Idx> {
pub start: Idx,
}``````
Expand description

A range only bounded inclusively below (`start..`).

The `RangeFrom` `start..` contains all values with `x >= start`.

Note: Overflow in the `Iterator` implementation (when the contained data type reaches its numerical limit) is allowed to panic, wrap, or saturate. This behavior is defined by the implementation of the `Step` trait. For primitive integers, this follows the normal rules, and respects the overflow checks profile (panic in debug, wrap in release). Note also that overflow happens earlier than you might assume: the overflow happens in the call to `next` that yields the maximum value, as the range must be set to a state to yield the next value.

§Examples

The `start..` syntax is a `RangeFrom`:

``````assert_eq!((2..), std::ops::RangeFrom { start: 2 });
assert_eq!(2 + 3 + 4, (2..).take(3).sum());``````
Run
``````let arr = [0, 1, 2, 3, 4];
assert_eq!(arr[ ..  ], [0, 1, 2, 3, 4]);
assert_eq!(arr[ .. 3], [0, 1, 2      ]);
assert_eq!(arr[ ..=3], [0, 1, 2, 3   ]);
assert_eq!(arr[1..  ], [   1, 2, 3, 4]); // This is a `RangeFrom`
assert_eq!(arr[1.. 3], [   1, 2      ]);
assert_eq!(arr[1..=3], [   1, 2, 3   ]);``````
Run

Fields§

§`start: Idx`

The lower bound of the range (inclusive).

Implementations§

source§

impl<Idx> RangeFrom<Idx>where Idx: PartialOrd,

1.35.0 · source

pub fn contains<U>(&self, item: &U) -> boolwhere Idx: PartialOrd<U>, U: PartialOrd<Idx> + ?Sized,

Returns `true` if `item` is contained in the range.

§Examples
``````assert!(!(3..).contains(&2));
assert!( (3..).contains(&3));
assert!( (3..).contains(&1_000_000_000));

assert!( (0.0..).contains(&0.5));
assert!(!(0.0..).contains(&f32::NAN));
assert!(!(f32::NAN..).contains(&0.5));``````
Run

Trait Implementations§

1.0.0 · source§

impl<Idx> Clone for RangeFrom<Idx>where Idx: Clone,

source§

fn clone(&self) -> RangeFrom<Idx> ⓘ

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from `source`. Read more
1.0.0 · source§

impl<Idx> Debug for RangeFrom<Idx>where Idx: Debug,

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.0.0 · source§

impl<Idx> Hash for RangeFrom<Idx>where Idx: Hash,

source§

fn hash<__H>(&self, state: &mut __H)where __H: Hasher,

Feeds this value into the given `Hasher`. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given `Hasher`. Read more
1.47.0 · source§

impl Index<RangeFrom<usize>> for CStr

§

type Output = CStr

The returned type after indexing.
source§

fn index(&self, index: RangeFrom<usize>) -> &CStr

Performs the indexing (`container[index]`) operation. Read more
1.0.0 · source§

impl<A> Iterator for RangeFrom<A>where A: Step,

§

type Item = A

The type of the elements being iterated over.
source§

source§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator. Read more
source§

fn nth(&mut self, n: usize) -> Option<A>

Returns the `n`th element of the iterator. Read more
source§

fn next_chunk<const N: usize>( &mut self, ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>where Self: Sized,

🔬This is a nightly-only experimental API. (`iter_next_chunk` #98326)
Advances the iterator and returns an array containing the next `N` values. Read more
1.0.0 · source§

fn count(self) -> usizewhere Self: Sized,

Consumes the iterator, counting the number of iterations and returning it. Read more
1.0.0 · source§

fn last(self) -> Option<Self::Item>where Self: Sized,

Consumes the iterator, returning the last element. Read more
source§

fn advance_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (`iter_advance_by` #77404)
Advances the iterator by `n` elements. Read more
1.28.0 · source§

fn step_by(self, step: usize) -> StepBy<Self> ⓘwhere Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more
1.0.0 · source§

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> ⓘwhere Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence. Read more
1.0.0 · source§

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> ⓘwhere Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs. Read more
source§

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G> ⓘwhere Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (`iter_intersperse` #79524)
Creates a new iterator which places an item generated by `separator` between adjacent items of the original iterator. Read more
1.0.0 · source§

fn map<B, F>(self, f: F) -> Map<Self, F> ⓘwhere Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element. Read more
1.21.0 · source§

fn for_each<F>(self, f: F)where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator. Read more
1.0.0 · source§

fn filter<P>(self, predicate: P) -> Filter<Self, P> ⓘwhere Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded. Read more
1.0.0 · source§

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> ⓘwhere Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps. Read more
1.0.0 · source§

fn enumerate(self) -> Enumerate<Self> ⓘwhere Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value. Read more
1.0.0 · source§

fn peekable(self) -> Peekable<Self> ⓘwhere Self: Sized,

Creates an iterator which can use the `peek` and `peek_mut` methods to look at the next element of the iterator without consuming it. See their documentation for more information. Read more
1.0.0 · source§

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> ⓘwhere Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that `skip`s elements based on a predicate. Read more
1.0.0 · source§

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> ⓘwhere Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate. Read more
1.57.0 · source§

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P> ⓘwhere Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps. Read more
1.0.0 · source§

fn skip(self, n: usize) -> Skip<Self> ⓘwhere Self: Sized,

Creates an iterator that skips the first `n` elements. Read more
1.0.0 · source§

fn take(self, n: usize) -> Take<Self> ⓘwhere Self: Sized,

Creates an iterator that yields the first `n` elements, or fewer if the underlying iterator ends sooner. Read more
1.0.0 · source§

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> ⓘwhere Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like `fold`, holds internal state, but unlike `fold`, produces a new iterator. Read more
1.0.0 · source§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> ⓘwhere Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure. Read more
source§

fn map_windows<F, R, const N: usize>(self, f: F) -> MapWindows<Self, F, N> ⓘwhere Self: Sized, F: FnMut(&[Self::Item; N]) -> R,

🔬This is a nightly-only experimental API. (`iter_map_windows` #87155)
Calls the given function `f` for each contiguous window of size `N` over `self` and returns an iterator over the outputs of `f`. Like `slice::windows()`, the windows during mapping overlap as well. Read more
1.0.0 · source§

fn fuse(self) -> Fuse<Self> ⓘwhere Self: Sized,

Creates an iterator which ends after the first `None`. Read more
1.0.0 · source§

fn inspect<F>(self, f: F) -> Inspect<Self, F> ⓘwhere Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Borrows an iterator, rather than consuming it. Read more
1.0.0 · source§

fn collect<B>(self) -> Bwhere B: FromIterator<Self::Item>, Self: Sized,

Transforms an iterator into a collection. Read more
source§

fn collect_into<E>(self, collection: &mut E) -> &mut Ewhere E: Extend<Self::Item>, Self: Sized,

🔬This is a nightly-only experimental API. (`iter_collect_into` #94780)
Collects all the items from an iterator into a collection. Read more
1.0.0 · source§

fn partition<B, F>(self, f: F) -> (B, B)where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it. Read more
source§

fn is_partitioned<P>(self, predicate: P) -> boolwhere Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (`iter_is_partitioned` #62544)
Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return `true` precede all those that return `false`. Read more
1.27.0 · source§

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> Rwhere Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more
1.27.0 · source§

fn try_for_each<F, R>(&mut self, f: F) -> Rwhere Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more
1.0.0 · source§

fn fold<B, F>(self, init: B, f: F) -> Bwhere Self: Sized, F: FnMut(B, Self::Item) -> B,

Folds every element into an accumulator by applying an operation, returning the final result. Read more
1.51.0 · source§

fn reduce<F>(self, f: F) -> Option<Self::Item>where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more
source§

fn try_reduce<R>( &mut self, f: impl FnMut(Self::Item, Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<<R as Try>::Output>>>::TryTypewhere Self: Sized, R: Try<Output = Self::Item>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (`iterator_try_reduce` #87053)
Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately. Read more
1.0.0 · source§

fn all<F>(&mut self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate. Read more
1.0.0 · source§

fn any<F>(&mut self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate. Read more
1.0.0 · source§

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate. Read more
1.30.0 · source§

fn find_map<B, F>(&mut self, f: F) -> Option<B>where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result. Read more
source§

fn try_find<R>( &mut self, f: impl FnMut(&Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryTypewhere Self: Sized, R: Try<Output = bool>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (`try_find` #63178)
Applies function to the elements of iterator and returns the first true result or the first error. Read more
1.0.0 · source§

fn position<P>(&mut self, predicate: P) -> Option<usize>where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index. Read more
1.6.0 · source§

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item>where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function. Read more
1.15.0 · source§

fn max_by<F>(self, compare: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function. Read more
1.6.0 · source§

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item>where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function. Read more
1.15.0 · source§

fn min_by<F>(self, compare: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function. Read more
1.0.0 · source§

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers. Read more
1.36.0 · source§

fn copied<'a, T>(self) -> Copied<Self> ⓘwhere T: 'a + Copy, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which copies all of its elements. Read more
1.0.0 · source§

fn cloned<'a, T>(self) -> Cloned<Self> ⓘwhere T: 'a + Clone, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which `clone`s all of its elements. Read more
1.0.0 · source§

fn cycle(self) -> Cycle<Self> ⓘwhere Self: Sized + Clone,

Repeats an iterator endlessly. Read more
source§

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N> ⓘwhere Self: Sized,

🔬This is a nightly-only experimental API. (`iter_array_chunks` #100450)
Returns an iterator over `N` elements of the iterator at a time. Read more
1.11.0 · source§

fn sum<S>(self) -> Swhere Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator. Read more
1.11.0 · source§

fn product<P>(self) -> Pwhere Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements Read more
source§

fn cmp_by<I, F>(self, other: I, cmp: F) -> Orderingwhere Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,

🔬This is a nightly-only experimental API. (`iter_order_by` #64295)
Lexicographically compares the elements of this `Iterator` with those of another with respect to the specified comparison function. Read more
1.5.0 · source§

fn partial_cmp<I>(self, other: I) -> Option<Ordering>where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Lexicographically compares the `PartialOrd` elements of this `Iterator` with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned. Read more
source§

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (`iter_order_by` #64295)
Lexicographically compares the elements of this `Iterator` with those of another with respect to the specified comparison function. Read more
1.5.0 · source§

fn eq<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this `Iterator` are equal to those of another. Read more
source§

fn eq_by<I, F>(self, other: I, eq: F) -> boolwhere Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,

🔬This is a nightly-only experimental API. (`iter_order_by` #64295)
Determines if the elements of this `Iterator` are equal to those of another with respect to the specified equality function. Read more
1.5.0 · source§

fn ne<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this `Iterator` are not equal to those of another. Read more
1.5.0 · source§

fn lt<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this `Iterator` are lexicographically less than those of another. Read more
1.5.0 · source§

fn le<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this `Iterator` are lexicographically less or equal to those of another. Read more
1.5.0 · source§

fn gt<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this `Iterator` are lexicographically greater than those of another. Read more
1.5.0 · source§

fn ge<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this `Iterator` are lexicographically greater than or equal to those of another. Read more
source§

fn is_sorted_by<F>(self, compare: F) -> boolwhere Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> bool,

🔬This is a nightly-only experimental API. (`is_sorted` #53485)
Checks if the elements of this iterator are sorted using the given comparator function. Read more
source§

fn is_sorted_by_key<F, K>(self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd,

🔬This is a nightly-only experimental API. (`is_sorted` #53485)
Checks if the elements of this iterator are sorted using the given key extraction function. Read more
1.0.0 · source§

impl<Idx> PartialEq for RangeFrom<Idx>where Idx: PartialEq,

source§

fn eq(&self, other: &RangeFrom<Idx>) -> bool

This method tests for `self` and `other` values to be equal, and is used by `==`.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for `!=`. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.28.0 · source§

impl<T> RangeBounds<T> for RangeFrom<&T>

source§

source§

1.35.0 · source§

fn contains<U>(&self, item: &U) -> boolwhere T: PartialOrd<U>, U: PartialOrd<T> + ?Sized,

Returns `true` if `item` is contained in the range. Read more
1.28.0 · source§

impl<T> RangeBounds<T> for RangeFrom<T>

source§

source§

1.35.0 · source§

fn contains<U>(&self, item: &U) -> boolwhere T: PartialOrd<U>, U: PartialOrd<T> + ?Sized,

Returns `true` if `item` is contained in the range. Read more
1.15.0 (const: unstable) · source§

impl<T> SliceIndex<[T]> for RangeFrom<usize>

The methods `index` and `index_mut` panic if the start of the range is out of bounds.

§

type Output = [T]

The output type returned by methods.
source§

fn get(self, slice: &[T]) -> Option<&[T]>

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a shared reference to the output at this location, if in bounds.
source§

fn get_mut(self, slice: &mut [T]) -> Option<&mut [T]>

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a mutable reference to the output at this location, if in bounds.
source§

unsafe fn get_unchecked(self, slice: *const [T]) -> *const [T]

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a pointer to the output at this location, without performing any bounds checking. Calling this method with an out-of-bounds index or a dangling `slice` pointer is undefined behavior even if the resulting pointer is not used.
source§

unsafe fn get_unchecked_mut(self, slice: *mut [T]) -> *mut [T]

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a mutable pointer to the output at this location, without performing any bounds checking. Calling this method with an out-of-bounds index or a dangling `slice` pointer is undefined behavior even if the resulting pointer is not used.
source§

fn index(self, slice: &[T]) -> &[T]

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a shared reference to the output at this location, panicking if out of bounds.
source§

fn index_mut(self, slice: &mut [T]) -> &mut [T]

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a mutable reference to the output at this location, panicking if out of bounds.
1.20.0 (const: unstable) · source§

impl SliceIndex<str> for RangeFrom<usize>

Implements substring slicing with syntax `&self[begin ..]` or `&mut self[begin ..]`.

Returns a slice of the given string from the byte range [`begin`, `len`). Equivalent to `&self[begin .. len]` or `&mut self[begin .. len]`.

This operation is O(1).

Prior to 1.20.0, these indexing operations were still supported by direct implementation of `Index` and `IndexMut`.

§Panics

Panics if `begin` does not point to the starting byte offset of a character (as defined by `is_char_boundary`), or if `begin > len`.

§

type Output = str

The output type returned by methods.
source§

fn get( self, slice: &str, ) -> Option<&<RangeFrom<usize> as SliceIndex<str>>::Output>

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a shared reference to the output at this location, if in bounds.
source§

fn get_mut( self, slice: &mut str, ) -> Option<&mut <RangeFrom<usize> as SliceIndex<str>>::Output>

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a mutable reference to the output at this location, if in bounds.
source§

unsafe fn get_unchecked( self, slice: *const str, ) -> *const <RangeFrom<usize> as SliceIndex<str>>::Output

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a pointer to the output at this location, without performing any bounds checking. Calling this method with an out-of-bounds index or a dangling `slice` pointer is undefined behavior even if the resulting pointer is not used.
source§

unsafe fn get_unchecked_mut( self, slice: *mut str, ) -> *mut <RangeFrom<usize> as SliceIndex<str>>::Output

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a mutable pointer to the output at this location, without performing any bounds checking. Calling this method with an out-of-bounds index or a dangling `slice` pointer is undefined behavior even if the resulting pointer is not used.
source§

fn index(self, slice: &str) -> &<RangeFrom<usize> as SliceIndex<str>>::Outputⓘ

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a shared reference to the output at this location, panicking if out of bounds.
source§

fn index_mut( self, slice: &mut str, ) -> &mut <RangeFrom<usize> as SliceIndex<str>>::Outputⓘ

🔬This is a nightly-only experimental API. (`slice_index_methods`)
Returns a mutable reference to the output at this location, panicking if out of bounds.
1.0.0 · source§

1.26.0 · source§

source§

1.0.0 · source§

source§

§

§

§

§

§

§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the `TypeId` of `self`. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls `U::from(self)`.

That is, this conversion is whatever the implementation of `From<T> for U` chooses to do.

source§

impl<I> IntoIterator for Iwhere I: Iterator,

§

type Item = <I as Iterator>::Item

The type of the elements being iterated over.
§

type IntoIter = I

Which kind of iterator are we turning this into?
source§

fn into_iter(self) -> I

Creates an iterator from a value. Read more
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.