Struct Saturating

#[repr(transparent)]
pub struct Saturating<T>(pub T);

Provides intentionally-saturating arithmetic on T.

Operations like + on u32 values are intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon saturating arithmetic.

Saturating arithmetic can be achieved either through methods like saturating_add, or through the Saturating<T> type, which says that all standard arithmetic operations on the underlying value are intended to have saturating semantics.

The underlying value can be retrieved through the .0 index of the Saturating tuple.

Examples

use std::num::Saturating;

let max = Saturating(u32::MAX);
let one = Saturating(1u32);

assert_eq!(u32::MAX, (max + one).0);

Tuple Fields

0: T

Implementations

impl Saturating<usize>

pub const MIN: Saturating<usize>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<usize>>::MIN, Saturating(usize::MIN));

pub const MAX: Saturating<usize>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<usize>>::MAX, Saturating(usize::MAX));

pub const BITS: u32 = 64u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<usize>>::BITS, usize::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100usize);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0usize).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000usize);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<usize>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<usize>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<usize>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<usize>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<usize>) -> Saturating<usize>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<usize>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<usize>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<usize>) -> Saturating<usize>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<usize>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<usize>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<usize>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<usize>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<usize>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3usize).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<u8>

pub const MIN: Saturating<u8>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u8>>::MIN, Saturating(u8::MIN));

pub const MAX: Saturating<u8>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u8>>::MAX, Saturating(u8::MAX));

pub const BITS: u32 = 8u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u8>>::BITS, u8::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100u8);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0u8).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000u8);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<u8>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<u8>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<u8>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<u8>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<u8>) -> Saturating<u8>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<u8>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<u8>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<u8>) -> Saturating<u8>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<u8>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<u8>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<u8>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<u8>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<u8>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3u8).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<u16>

pub const MIN: Saturating<u16>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u16>>::MIN, Saturating(u16::MIN));

pub const MAX: Saturating<u16>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u16>>::MAX, Saturating(u16::MAX));

pub const BITS: u32 = 16u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u16>>::BITS, u16::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100u16);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0u16).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000u16);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<u16>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<u16>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<u16>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<u16>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<u16>) -> Saturating<u16>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<u16>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<u16>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<u16>) -> Saturating<u16>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<u16>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<u16>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<u16>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<u16>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<u16>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3u16).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<u32>

pub const MIN: Saturating<u32>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u32>>::MIN, Saturating(u32::MIN));

pub const MAX: Saturating<u32>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u32>>::MAX, Saturating(u32::MAX));

pub const BITS: u32 = 32u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u32>>::BITS, u32::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100u32);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0u32).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000u32);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<u32>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<u32>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<u32>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<u32>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<u32>) -> Saturating<u32>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<u32>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<u32>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<u32>) -> Saturating<u32>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<u32>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<u32>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<u32>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<u32>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<u32>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3u32).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<u64>

pub const MIN: Saturating<u64>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u64>>::MIN, Saturating(u64::MIN));

pub const MAX: Saturating<u64>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u64>>::MAX, Saturating(u64::MAX));

pub const BITS: u32 = 64u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u64>>::BITS, u64::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100u64);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0u64).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000u64);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<u64>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<u64>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<u64>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<u64>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<u64>) -> Saturating<u64>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<u64>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<u64>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<u64>) -> Saturating<u64>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<u64>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<u64>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<u64>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<u64>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<u64>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3u64).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<u128>

pub const MIN: Saturating<u128>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u128>>::MIN, Saturating(u128::MIN));

pub const MAX: Saturating<u128>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u128>>::MAX, Saturating(u128::MAX));

pub const BITS: u32 = 128u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<u128>>::BITS, u128::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100u128);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0u128).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000u128);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<u128>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<u128>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<u128>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<u128>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<u128>) -> Saturating<u128>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<u128>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<u128>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<u128>) -> Saturating<u128>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<u128>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<u128>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<u128>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<u128>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<u128>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3u128).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<isize>

pub const MIN: Saturating<isize>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<isize>>::MIN, Saturating(isize::MIN));

pub const MAX: Saturating<isize>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<isize>>::MAX, Saturating(isize::MAX));

pub const BITS: u32 = 64u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<isize>>::BITS, isize::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100isize);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0isize).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000isize);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<isize>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<isize>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<isize>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<isize>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<isize>) -> Saturating<isize>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<isize>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<isize>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<isize>) -> Saturating<isize>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<isize>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<isize>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<isize>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<isize>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<isize>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3isize).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<i8>

pub const MIN: Saturating<i8>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i8>>::MIN, Saturating(i8::MIN));

pub const MAX: Saturating<i8>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i8>>::MAX, Saturating(i8::MAX));

pub const BITS: u32 = 8u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i8>>::BITS, i8::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100i8);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0i8).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000i8);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<i8>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<i8>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<i8>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<i8>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<i8>) -> Saturating<i8>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<i8>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<i8>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<i8>) -> Saturating<i8>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<i8>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<i8>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<i8>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<i8>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<i8>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<i16>

pub const MIN: Saturating<i16>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i16>>::MIN, Saturating(i16::MIN));

pub const MAX: Saturating<i16>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i16>>::MAX, Saturating(i16::MAX));

pub const BITS: u32 = 16u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i16>>::BITS, i16::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100i16);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0i16).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000i16);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<i16>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<i16>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<i16>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<i16>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<i16>) -> Saturating<i16>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<i16>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<i16>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<i16>) -> Saturating<i16>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<i16>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<i16>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<i16>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<i16>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<i16>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3i16).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<i32>

pub const MIN: Saturating<i32>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i32>>::MIN, Saturating(i32::MIN));

pub const MAX: Saturating<i32>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i32>>::MAX, Saturating(i32::MAX));

pub const BITS: u32 = 32u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i32>>::BITS, i32::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100i32);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0i32).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000i32);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<i32>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<i32>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<i32>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<i32>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<i32>) -> Saturating<i32>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<i32>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<i32>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<i32>) -> Saturating<i32>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<i32>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<i32>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<i32>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<i32>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<i32>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3i32).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<i64>

pub const MIN: Saturating<i64>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i64>>::MIN, Saturating(i64::MIN));

pub const MAX: Saturating<i64>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i64>>::MAX, Saturating(i64::MAX));

pub const BITS: u32 = 64u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i64>>::BITS, i64::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100i64);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0i64).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000i64);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<i64>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<i64>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<i64>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<i64>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<i64>) -> Saturating<i64>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<i64>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<i64>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<i64>) -> Saturating<i64>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<i64>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<i64>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<i64>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<i64>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<i64>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3i64).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<i128>

pub const MIN: Saturating<i128>

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i128>>::MIN, Saturating(i128::MIN));

pub const MAX: Saturating<i128>

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i128>>::MAX, Saturating(i128::MAX));

pub const BITS: u32 = 128u32

Returns the size of this integer type in bits.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(<Saturating<i128>>::BITS, i128::BITS);

pub const fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b01001100i128);

assert_eq!(n.count_ones(), 3);

pub const fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(!0i128).count_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0101000i128);

assert_eq!(n.trailing_zeros(), 3);

pub const fn rotate_left(self, n: u32) -> Saturating<i128>

Shifts the bits to the left by a specified amount, n, saturating the truncated bits to the end of the resulting integer.

Please note this isn’t the same operation as the << shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub const fn rotate_right(self, n: u32) -> Saturating<i128>

Shifts the bits to the right by a specified amount, n, saturating the truncated bits to the beginning of the resulting integer.

Please note this isn’t the same operation as the >> shifting operator!

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i64> = Saturating(0x0123456789ABCDEF);
let m: Saturating<i64> = Saturating(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub const fn swap_bytes(self) -> Saturating<i128>

Reverses the byte order of the integer.

Examples

Basic usage:

use std::num::Saturating;

let n: Saturating<i16> = Saturating(0b0000000_01010101);
assert_eq!(n, Saturating(85));

let m = n.swap_bytes();

assert_eq!(m, Saturating(0b01010101_00000000));
assert_eq!(m, Saturating(21760));

pub const fn reverse_bits(self) -> Saturating<i128>

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

use std::num::Saturating;

let n = Saturating(0b0000000_01010101i16);
assert_eq!(n, Saturating(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Saturating(-22016));

pub const fn from_be(x: Saturating<i128>) -> Saturating<i128>

Converts an integer from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(<Saturating<i128>>::from_be(n), n)
} else {
    assert_eq!(<Saturating<i128>>::from_be(n), n.swap_bytes())
}

pub const fn from_le(x: Saturating<i128>) -> Saturating<i128>

Converts an integer from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(<Saturating<i128>>::from_le(n), n)
} else {
    assert_eq!(<Saturating<i128>>::from_le(n), n.swap_bytes())
}

pub const fn to_be(self) -> Saturating<i128>

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

pub const fn to_le(self) -> Saturating<i128>

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

pub const fn pow(self, exp: u32) -> Saturating<i128>

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(3i128).pow(4), Saturating(81));

Results that are too large are saturated:

use std::num::Saturating;

assert_eq!(Saturating(3i8).pow(5), Saturating(127));
assert_eq!(Saturating(3i8).pow(6), Saturating(127));

impl Saturating<isize>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(isize::MAX >> 2);

assert_eq!(n.leading_zeros(), 3);

pub const fn abs(self) -> Saturating<isize>

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(100isize).abs(), Saturating(100));
assert_eq!(Saturating(-100isize).abs(), Saturating(100));
assert_eq!(Saturating(isize::MIN).abs(), Saturating((isize::MIN + 1).abs()));
assert_eq!(Saturating(isize::MIN).abs(), Saturating(isize::MIN.saturating_abs()));
assert_eq!(Saturating(isize::MIN).abs(), Saturating(isize::MAX));

pub const fn signum(self) -> Saturating<isize>

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(10isize).signum(), Saturating(1));
assert_eq!(Saturating(0isize).signum(), Saturating(0));
assert_eq!(Saturating(-10isize).signum(), Saturating(-1));

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(10isize).is_positive());
assert!(!Saturating(-10isize).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(-10isize).is_negative());
assert!(!Saturating(10isize).is_negative());

impl Saturating<i8>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(i8::MAX >> 2);

assert_eq!(n.leading_zeros(), 3);

pub const fn abs(self) -> Saturating<i8>

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(100i8).abs(), Saturating(100));
assert_eq!(Saturating(-100i8).abs(), Saturating(100));
assert_eq!(Saturating(i8::MIN).abs(), Saturating((i8::MIN + 1).abs()));
assert_eq!(Saturating(i8::MIN).abs(), Saturating(i8::MIN.saturating_abs()));
assert_eq!(Saturating(i8::MIN).abs(), Saturating(i8::MAX));

pub const fn signum(self) -> Saturating<i8>

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(10i8).signum(), Saturating(1));
assert_eq!(Saturating(0i8).signum(), Saturating(0));
assert_eq!(Saturating(-10i8).signum(), Saturating(-1));

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(10i8).is_positive());
assert!(!Saturating(-10i8).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(-10i8).is_negative());
assert!(!Saturating(10i8).is_negative());

impl Saturating<i16>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(i16::MAX >> 2);

assert_eq!(n.leading_zeros(), 3);

pub const fn abs(self) -> Saturating<i16>

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(100i16).abs(), Saturating(100));
assert_eq!(Saturating(-100i16).abs(), Saturating(100));
assert_eq!(Saturating(i16::MIN).abs(), Saturating((i16::MIN + 1).abs()));
assert_eq!(Saturating(i16::MIN).abs(), Saturating(i16::MIN.saturating_abs()));
assert_eq!(Saturating(i16::MIN).abs(), Saturating(i16::MAX));

pub const fn signum(self) -> Saturating<i16>

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(10i16).signum(), Saturating(1));
assert_eq!(Saturating(0i16).signum(), Saturating(0));
assert_eq!(Saturating(-10i16).signum(), Saturating(-1));

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(10i16).is_positive());
assert!(!Saturating(-10i16).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(-10i16).is_negative());
assert!(!Saturating(10i16).is_negative());

impl Saturating<i32>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(i32::MAX >> 2);

assert_eq!(n.leading_zeros(), 3);

pub const fn abs(self) -> Saturating<i32>

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(100i32).abs(), Saturating(100));
assert_eq!(Saturating(-100i32).abs(), Saturating(100));
assert_eq!(Saturating(i32::MIN).abs(), Saturating((i32::MIN + 1).abs()));
assert_eq!(Saturating(i32::MIN).abs(), Saturating(i32::MIN.saturating_abs()));
assert_eq!(Saturating(i32::MIN).abs(), Saturating(i32::MAX));

pub const fn signum(self) -> Saturating<i32>

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(10i32).signum(), Saturating(1));
assert_eq!(Saturating(0i32).signum(), Saturating(0));
assert_eq!(Saturating(-10i32).signum(), Saturating(-1));

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(10i32).is_positive());
assert!(!Saturating(-10i32).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(-10i32).is_negative());
assert!(!Saturating(10i32).is_negative());

impl Saturating<i64>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(i64::MAX >> 2);

assert_eq!(n.leading_zeros(), 3);

pub const fn abs(self) -> Saturating<i64>

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(100i64).abs(), Saturating(100));
assert_eq!(Saturating(-100i64).abs(), Saturating(100));
assert_eq!(Saturating(i64::MIN).abs(), Saturating((i64::MIN + 1).abs()));
assert_eq!(Saturating(i64::MIN).abs(), Saturating(i64::MIN.saturating_abs()));
assert_eq!(Saturating(i64::MIN).abs(), Saturating(i64::MAX));

pub const fn signum(self) -> Saturating<i64>

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(10i64).signum(), Saturating(1));
assert_eq!(Saturating(0i64).signum(), Saturating(0));
assert_eq!(Saturating(-10i64).signum(), Saturating(-1));

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(10i64).is_positive());
assert!(!Saturating(-10i64).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(-10i64).is_negative());
assert!(!Saturating(10i64).is_negative());

impl Saturating<i128>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(i128::MAX >> 2);

assert_eq!(n.leading_zeros(), 3);

pub const fn abs(self) -> Saturating<i128>

Saturating absolute value. Computes self.abs(), returning MAX if self == MIN instead of overflowing.

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(100i128).abs(), Saturating(100));
assert_eq!(Saturating(-100i128).abs(), Saturating(100));
assert_eq!(Saturating(i128::MIN).abs(), Saturating((i128::MIN + 1).abs()));
assert_eq!(Saturating(i128::MIN).abs(), Saturating(i128::MIN.saturating_abs()));
assert_eq!(Saturating(i128::MIN).abs(), Saturating(i128::MAX));

pub const fn signum(self) -> Saturating<i128>

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(10i128).signum(), Saturating(1));
assert_eq!(Saturating(0i128).signum(), Saturating(0));
assert_eq!(Saturating(-10i128).signum(), Saturating(-1));

pub const fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(10i128).is_positive());
assert!(!Saturating(-10i128).is_positive());

pub const fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(-10i128).is_negative());
assert!(!Saturating(10i128).is_negative());

impl Saturating<usize>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(usize::MAX >> 2);

assert_eq!(n.leading_zeros(), 2);

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(16usize).is_power_of_two());
assert!(!Saturating(10usize).is_power_of_two());

impl Saturating<u8>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(u8::MAX >> 2);

assert_eq!(n.leading_zeros(), 2);

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(16u8).is_power_of_two());
assert!(!Saturating(10u8).is_power_of_two());

impl Saturating<u16>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(u16::MAX >> 2);

assert_eq!(n.leading_zeros(), 2);

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(16u16).is_power_of_two());
assert!(!Saturating(10u16).is_power_of_two());

impl Saturating<u32>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(u32::MAX >> 2);

assert_eq!(n.leading_zeros(), 2);

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(16u32).is_power_of_two());
assert!(!Saturating(10u32).is_power_of_two());

impl Saturating<u64>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(u64::MAX >> 2);

assert_eq!(n.leading_zeros(), 2);

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(16u64).is_power_of_two());
assert!(!Saturating(10u64).is_power_of_two());

impl Saturating<u128>

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

use std::num::Saturating;

let n = Saturating(u128::MAX >> 2);

assert_eq!(n.leading_zeros(), 2);

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

use std::num::Saturating;

assert!(Saturating(16u128).is_power_of_two());
assert!(!Saturating(10u128).is_power_of_two());

Trait Implementations

impl Add<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i128>) -> <Saturating<i128> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i128>) -> <Saturating<i128> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i16>) -> <Saturating<i16> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i16>) -> <Saturating<i16> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i32>) -> <Saturating<i32> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i32>) -> <Saturating<i32> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i64>) -> <Saturating<i64> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i64>) -> <Saturating<i64> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i8>) -> <Saturating<i8> as Add>::Output

Performs the + operation.

impl Add<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<i8>) -> <Saturating<i8> as Add>::Output

Performs the + operation.

impl Add<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<isize>) -> <Saturating<isize> as Add>::Output

Performs the + operation.

impl Add<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<isize>) -> <Saturating<isize> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u128>) -> <Saturating<u128> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u128>) -> <Saturating<u128> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u16>) -> <Saturating<u16> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u16>) -> <Saturating<u16> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u32>) -> <Saturating<u32> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u32>) -> <Saturating<u32> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u64>) -> <Saturating<u64> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u64>) -> <Saturating<u64> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u8>) -> <Saturating<u8> as Add>::Output

Performs the + operation.

impl Add<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<u8>) -> <Saturating<u8> as Add>::Output

Performs the + operation.

impl Add<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<usize>) -> <Saturating<usize> as Add>::Output

Performs the + operation.

impl Add<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: &Saturating<usize>) -> <Saturating<usize> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<i128>) -> <Saturating<i128> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<i16>) -> <Saturating<i16> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<i32>) -> <Saturating<i32> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<i64>) -> <Saturating<i64> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<i8>) -> <Saturating<i8> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<isize>) -> <Saturating<isize> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<u128>) -> <Saturating<u128> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<u16>) -> <Saturating<u16> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<u32>) -> <Saturating<u32> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<u64>) -> <Saturating<u64> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<u8>) -> <Saturating<u8> as Add>::Output

Performs the + operation.

impl<'a> Add<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as Add>::Output

The resulting type after applying the + operator.

fn add(self, other: Saturating<usize>) -> <Saturating<usize> as Add>::Output

Performs the + operation.

impl Add for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the + operator.

fn add(self, other: Saturating<i128>) -> Saturating<i128>

Performs the + operation.

impl Add for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the + operator.

fn add(self, other: Saturating<i16>) -> Saturating<i16>

Performs the + operation.

impl Add for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the + operator.

fn add(self, other: Saturating<i32>) -> Saturating<i32>

Performs the + operation.

impl Add for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the + operator.

fn add(self, other: Saturating<i64>) -> Saturating<i64>

Performs the + operation.

impl Add for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the + operator.

fn add(self, other: Saturating<i8>) -> Saturating<i8>

Performs the + operation.

impl Add for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the + operator.

fn add(self, other: Saturating<isize>) -> Saturating<isize>

Performs the + operation.

impl Add for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the + operator.

fn add(self, other: Saturating<u128>) -> Saturating<u128>

Performs the + operation.

impl Add for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the + operator.

fn add(self, other: Saturating<u16>) -> Saturating<u16>

Performs the + operation.

impl Add for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the + operator.

fn add(self, other: Saturating<u32>) -> Saturating<u32>

Performs the + operation.

impl Add for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the + operator.

fn add(self, other: Saturating<u64>) -> Saturating<u64>

Performs the + operation.

impl Add for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the + operator.

fn add(self, other: Saturating<u8>) -> Saturating<u8>

Performs the + operation.

impl Add for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the + operator.

fn add(self, other: Saturating<usize>) -> Saturating<usize>

Performs the + operation.

impl AddAssign<&Saturating<i128>> for Saturating<i128>

fn add_assign(&mut self, other: &Saturating<i128>)

Performs the += operation.

impl AddAssign<&Saturating<i16>> for Saturating<i16>

fn add_assign(&mut self, other: &Saturating<i16>)

Performs the += operation.

impl AddAssign<&Saturating<i32>> for Saturating<i32>

fn add_assign(&mut self, other: &Saturating<i32>)

Performs the += operation.

impl AddAssign<&Saturating<i64>> for Saturating<i64>

fn add_assign(&mut self, other: &Saturating<i64>)

Performs the += operation.

impl AddAssign<&Saturating<i8>> for Saturating<i8>

fn add_assign(&mut self, other: &Saturating<i8>)

Performs the += operation.

impl AddAssign<&Saturating<isize>> for Saturating<isize>

fn add_assign(&mut self, other: &Saturating<isize>)

Performs the += operation.

impl AddAssign<&Saturating<u128>> for Saturating<u128>

fn add_assign(&mut self, other: &Saturating<u128>)

Performs the += operation.

impl AddAssign<&Saturating<u16>> for Saturating<u16>

fn add_assign(&mut self, other: &Saturating<u16>)

Performs the += operation.

impl AddAssign<&Saturating<u32>> for Saturating<u32>

fn add_assign(&mut self, other: &Saturating<u32>)

Performs the += operation.

impl AddAssign<&Saturating<u64>> for Saturating<u64>

fn add_assign(&mut self, other: &Saturating<u64>)

Performs the += operation.

impl AddAssign<&Saturating<u8>> for Saturating<u8>

fn add_assign(&mut self, other: &Saturating<u8>)

Performs the += operation.

impl AddAssign<&Saturating<usize>> for Saturating<usize>

fn add_assign(&mut self, other: &Saturating<usize>)

Performs the += operation.

impl AddAssign<&i128> for Saturating<i128>

fn add_assign(&mut self, other: &i128)

Performs the += operation.

impl AddAssign<&i16> for Saturating<i16>

fn add_assign(&mut self, other: &i16)

Performs the += operation.

impl AddAssign<&i32> for Saturating<i32>

fn add_assign(&mut self, other: &i32)

Performs the += operation.

impl AddAssign<&i64> for Saturating<i64>

fn add_assign(&mut self, other: &i64)

Performs the += operation.

impl AddAssign<&i8> for Saturating<i8>

fn add_assign(&mut self, other: &i8)

Performs the += operation.

impl AddAssign<&isize> for Saturating<isize>

fn add_assign(&mut self, other: &isize)

Performs the += operation.

impl AddAssign<&u128> for Saturating<u128>

fn add_assign(&mut self, other: &u128)

Performs the += operation.

impl AddAssign<&u16> for Saturating<u16>

fn add_assign(&mut self, other: &u16)

Performs the += operation.

impl AddAssign<&u32> for Saturating<u32>

fn add_assign(&mut self, other: &u32)

Performs the += operation.

impl AddAssign<&u64> for Saturating<u64>

fn add_assign(&mut self, other: &u64)

Performs the += operation.

impl AddAssign<&u8> for Saturating<u8>

fn add_assign(&mut self, other: &u8)

Performs the += operation.

impl AddAssign<&usize> for Saturating<usize>

fn add_assign(&mut self, other: &usize)

Performs the += operation.

impl AddAssign<i128> for Saturating<i128>

fn add_assign(&mut self, other: i128)

Performs the += operation.

impl AddAssign<i16> for Saturating<i16>

fn add_assign(&mut self, other: i16)

Performs the += operation.

impl AddAssign<i32> for Saturating<i32>

fn add_assign(&mut self, other: i32)

Performs the += operation.

impl AddAssign<i64> for Saturating<i64>

fn add_assign(&mut self, other: i64)

Performs the += operation.

impl AddAssign<i8> for Saturating<i8>

fn add_assign(&mut self, other: i8)

Performs the += operation.

impl AddAssign<isize> for Saturating<isize>

fn add_assign(&mut self, other: isize)

Performs the += operation.

impl AddAssign<u128> for Saturating<u128>

fn add_assign(&mut self, other: u128)

Performs the += operation.

impl AddAssign<u16> for Saturating<u16>

fn add_assign(&mut self, other: u16)

Performs the += operation.

impl AddAssign<u32> for Saturating<u32>

fn add_assign(&mut self, other: u32)

Performs the += operation.

impl AddAssign<u64> for Saturating<u64>

fn add_assign(&mut self, other: u64)

Performs the += operation.

impl AddAssign<u8> for Saturating<u8>

fn add_assign(&mut self, other: u8)

Performs the += operation.

impl AddAssign<usize> for Saturating<usize>

fn add_assign(&mut self, other: usize)

Performs the += operation.

impl AddAssign for Saturating<i128>

fn add_assign(&mut self, other: Saturating<i128>)

Performs the += operation.

impl AddAssign for Saturating<i16>

fn add_assign(&mut self, other: Saturating<i16>)

Performs the += operation.

impl AddAssign for Saturating<i32>

fn add_assign(&mut self, other: Saturating<i32>)

Performs the += operation.

impl AddAssign for Saturating<i64>

fn add_assign(&mut self, other: Saturating<i64>)

Performs the += operation.

impl AddAssign for Saturating<i8>

fn add_assign(&mut self, other: Saturating<i8>)

Performs the += operation.

impl AddAssign for Saturating<isize>

fn add_assign(&mut self, other: Saturating<isize>)

Performs the += operation.

impl AddAssign for Saturating<u128>

fn add_assign(&mut self, other: Saturating<u128>)

Performs the += operation.

impl AddAssign for Saturating<u16>

fn add_assign(&mut self, other: Saturating<u16>)

Performs the += operation.

impl AddAssign for Saturating<u32>

fn add_assign(&mut self, other: Saturating<u32>)

Performs the += operation.

impl AddAssign for Saturating<u64>

fn add_assign(&mut self, other: Saturating<u64>)

Performs the += operation.

impl AddAssign for Saturating<u8>

fn add_assign(&mut self, other: Saturating<u8>)

Performs the += operation.

impl AddAssign for Saturating<usize>

fn add_assign(&mut self, other: Saturating<usize>)

Performs the += operation.

impl<T> Binary for Saturating<T>

where T: Binary,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<i128>, ) -> <Saturating<i128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<i128>, ) -> <Saturating<i128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i16>) -> <Saturating<i16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i16>) -> <Saturating<i16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i32>) -> <Saturating<i32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i32>) -> <Saturating<i32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i64>) -> <Saturating<i64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i64>) -> <Saturating<i64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i8>) -> <Saturating<i8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<i8>) -> <Saturating<i8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<isize>, ) -> <Saturating<isize> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<isize>, ) -> <Saturating<isize> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<u128>, ) -> <Saturating<u128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<u128>, ) -> <Saturating<u128> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u16>) -> <Saturating<u16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u16>) -> <Saturating<u16> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u32>) -> <Saturating<u32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u32>) -> <Saturating<u32> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u64>) -> <Saturating<u64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u64>) -> <Saturating<u64> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u8>) -> <Saturating<u8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: &Saturating<u8>) -> <Saturating<u8> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<usize>, ) -> <Saturating<usize> as BitAnd>::Output

Performs the & operation.

impl BitAnd<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: &Saturating<usize>, ) -> <Saturating<usize> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i128>) -> <Saturating<i128> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i16>) -> <Saturating<i16> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i32>) -> <Saturating<i32> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i64>) -> <Saturating<i64> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i8>) -> <Saturating<i8> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: Saturating<isize>, ) -> <Saturating<isize> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u128>) -> <Saturating<u128> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u16>) -> <Saturating<u16> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u32>) -> <Saturating<u32> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u64>) -> <Saturating<u64> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u8>) -> <Saturating<u8> as BitAnd>::Output

Performs the & operation.

impl<'a> BitAnd<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as BitAnd>::Output

The resulting type after applying the & operator.

fn bitand( self, other: Saturating<usize>, ) -> <Saturating<usize> as BitAnd>::Output

Performs the & operation.

impl BitAnd for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i128>) -> Saturating<i128>

Performs the & operation.

impl BitAnd for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i16>) -> Saturating<i16>

Performs the & operation.

impl BitAnd for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i32>) -> Saturating<i32>

Performs the & operation.

impl BitAnd for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i64>) -> Saturating<i64>

Performs the & operation.

impl BitAnd for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<i8>) -> Saturating<i8>

Performs the & operation.

impl BitAnd for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<isize>) -> Saturating<isize>

Performs the & operation.

impl BitAnd for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u128>) -> Saturating<u128>

Performs the & operation.

impl BitAnd for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u16>) -> Saturating<u16>

Performs the & operation.

impl BitAnd for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u32>) -> Saturating<u32>

Performs the & operation.

impl BitAnd for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u64>) -> Saturating<u64>

Performs the & operation.

impl BitAnd for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<u8>) -> Saturating<u8>

Performs the & operation.

impl BitAnd for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the & operator.

fn bitand(self, other: Saturating<usize>) -> Saturating<usize>

Performs the & operation.

impl BitAndAssign<&Saturating<i128>> for Saturating<i128>

fn bitand_assign(&mut self, other: &Saturating<i128>)

Performs the &= operation.

impl BitAndAssign<&Saturating<i16>> for Saturating<i16>

fn bitand_assign(&mut self, other: &Saturating<i16>)

Performs the &= operation.

impl BitAndAssign<&Saturating<i32>> for Saturating<i32>

fn bitand_assign(&mut self, other: &Saturating<i32>)

Performs the &= operation.

impl BitAndAssign<&Saturating<i64>> for Saturating<i64>

fn bitand_assign(&mut self, other: &Saturating<i64>)

Performs the &= operation.

impl BitAndAssign<&Saturating<i8>> for Saturating<i8>

fn bitand_assign(&mut self, other: &Saturating<i8>)

Performs the &= operation.

impl BitAndAssign<&Saturating<isize>> for Saturating<isize>

fn bitand_assign(&mut self, other: &Saturating<isize>)

Performs the &= operation.

impl BitAndAssign<&Saturating<u128>> for Saturating<u128>

fn bitand_assign(&mut self, other: &Saturating<u128>)

Performs the &= operation.

impl BitAndAssign<&Saturating<u16>> for Saturating<u16>

fn bitand_assign(&mut self, other: &Saturating<u16>)

Performs the &= operation.

impl BitAndAssign<&Saturating<u32>> for Saturating<u32>

fn bitand_assign(&mut self, other: &Saturating<u32>)

Performs the &= operation.

impl BitAndAssign<&Saturating<u64>> for Saturating<u64>

fn bitand_assign(&mut self, other: &Saturating<u64>)

Performs the &= operation.

impl BitAndAssign<&Saturating<u8>> for Saturating<u8>

fn bitand_assign(&mut self, other: &Saturating<u8>)

Performs the &= operation.

impl BitAndAssign<&Saturating<usize>> for Saturating<usize>

fn bitand_assign(&mut self, other: &Saturating<usize>)

Performs the &= operation.

impl BitAndAssign<&i128> for Saturating<i128>

fn bitand_assign(&mut self, other: &i128)

Performs the &= operation.

impl BitAndAssign<&i16> for Saturating<i16>

fn bitand_assign(&mut self, other: &i16)

Performs the &= operation.

impl BitAndAssign<&i32> for Saturating<i32>

fn bitand_assign(&mut self, other: &i32)

Performs the &= operation.

impl BitAndAssign<&i64> for Saturating<i64>

fn bitand_assign(&mut self, other: &i64)

Performs the &= operation.

impl BitAndAssign<&i8> for Saturating<i8>

fn bitand_assign(&mut self, other: &i8)

Performs the &= operation.

impl BitAndAssign<&isize> for Saturating<isize>

fn bitand_assign(&mut self, other: &isize)

Performs the &= operation.

impl BitAndAssign<&u128> for Saturating<u128>

fn bitand_assign(&mut self, other: &u128)

Performs the &= operation.

impl BitAndAssign<&u16> for Saturating<u16>

fn bitand_assign(&mut self, other: &u16)

Performs the &= operation.

impl BitAndAssign<&u32> for Saturating<u32>

fn bitand_assign(&mut self, other: &u32)

Performs the &= operation.

impl BitAndAssign<&u64> for Saturating<u64>

fn bitand_assign(&mut self, other: &u64)

Performs the &= operation.

impl BitAndAssign<&u8> for Saturating<u8>

fn bitand_assign(&mut self, other: &u8)

Performs the &= operation.

impl BitAndAssign<&usize> for Saturating<usize>

fn bitand_assign(&mut self, other: &usize)

Performs the &= operation.

impl BitAndAssign<i128> for Saturating<i128>

fn bitand_assign(&mut self, other: i128)

Performs the &= operation.

impl BitAndAssign<i16> for Saturating<i16>

fn bitand_assign(&mut self, other: i16)

Performs the &= operation.

impl BitAndAssign<i32> for Saturating<i32>

fn bitand_assign(&mut self, other: i32)

Performs the &= operation.

impl BitAndAssign<i64> for Saturating<i64>

fn bitand_assign(&mut self, other: i64)

Performs the &= operation.

impl BitAndAssign<i8> for Saturating<i8>

fn bitand_assign(&mut self, other: i8)

Performs the &= operation.

impl BitAndAssign<isize> for Saturating<isize>

fn bitand_assign(&mut self, other: isize)

Performs the &= operation.

impl BitAndAssign<u128> for Saturating<u128>

fn bitand_assign(&mut self, other: u128)

Performs the &= operation.

impl BitAndAssign<u16> for Saturating<u16>

fn bitand_assign(&mut self, other: u16)

Performs the &= operation.

impl BitAndAssign<u32> for Saturating<u32>

fn bitand_assign(&mut self, other: u32)

Performs the &= operation.

impl BitAndAssign<u64> for Saturating<u64>

fn bitand_assign(&mut self, other: u64)

Performs the &= operation.

impl BitAndAssign<u8> for Saturating<u8>

fn bitand_assign(&mut self, other: u8)

Performs the &= operation.

impl BitAndAssign<usize> for Saturating<usize>

fn bitand_assign(&mut self, other: usize)

Performs the &= operation.

impl BitAndAssign for Saturating<i128>

fn bitand_assign(&mut self, other: Saturating<i128>)

Performs the &= operation.

impl BitAndAssign for Saturating<i16>

fn bitand_assign(&mut self, other: Saturating<i16>)

Performs the &= operation.

impl BitAndAssign for Saturating<i32>

fn bitand_assign(&mut self, other: Saturating<i32>)

Performs the &= operation.

impl BitAndAssign for Saturating<i64>

fn bitand_assign(&mut self, other: Saturating<i64>)

Performs the &= operation.

impl BitAndAssign for Saturating<i8>

fn bitand_assign(&mut self, other: Saturating<i8>)

Performs the &= operation.

impl BitAndAssign for Saturating<isize>

fn bitand_assign(&mut self, other: Saturating<isize>)

Performs the &= operation.

impl BitAndAssign for Saturating<u128>

fn bitand_assign(&mut self, other: Saturating<u128>)

Performs the &= operation.

impl BitAndAssign for Saturating<u16>

fn bitand_assign(&mut self, other: Saturating<u16>)

Performs the &= operation.

impl BitAndAssign for Saturating<u32>

fn bitand_assign(&mut self, other: Saturating<u32>)

Performs the &= operation.

impl BitAndAssign for Saturating<u64>

fn bitand_assign(&mut self, other: Saturating<u64>)

Performs the &= operation.

impl BitAndAssign for Saturating<u8>

fn bitand_assign(&mut self, other: Saturating<u8>)

Performs the &= operation.

impl BitAndAssign for Saturating<usize>

fn bitand_assign(&mut self, other: Saturating<usize>)

Performs the &= operation.

impl BitOr<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i128>) -> <Saturating<i128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i128>) -> <Saturating<i128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i16>) -> <Saturating<i16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i16>) -> <Saturating<i16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i32>) -> <Saturating<i32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i32>) -> <Saturating<i32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i64>) -> <Saturating<i64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i64>) -> <Saturating<i64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i8>) -> <Saturating<i8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<i8>) -> <Saturating<i8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor( self, other: &Saturating<isize>, ) -> <Saturating<isize> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor( self, other: &Saturating<isize>, ) -> <Saturating<isize> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u128>) -> <Saturating<u128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u128>) -> <Saturating<u128> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u16>) -> <Saturating<u16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u16>) -> <Saturating<u16> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u32>) -> <Saturating<u32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u32>) -> <Saturating<u32> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u64>) -> <Saturating<u64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u64>) -> <Saturating<u64> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u8>) -> <Saturating<u8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: &Saturating<u8>) -> <Saturating<u8> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor( self, other: &Saturating<usize>, ) -> <Saturating<usize> as BitOr>::Output

Performs the | operation.

impl BitOr<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor( self, other: &Saturating<usize>, ) -> <Saturating<usize> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i128>) -> <Saturating<i128> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i16>) -> <Saturating<i16> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i32>) -> <Saturating<i32> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i64>) -> <Saturating<i64> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i8>) -> <Saturating<i8> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<isize>) -> <Saturating<isize> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u128>) -> <Saturating<u128> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u16>) -> <Saturating<u16> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u32>) -> <Saturating<u32> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u64>) -> <Saturating<u64> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u8>) -> <Saturating<u8> as BitOr>::Output

Performs the | operation.

impl<'a> BitOr<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as BitOr>::Output

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<usize>) -> <Saturating<usize> as BitOr>::Output

Performs the | operation.

impl BitOr for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i128>) -> Saturating<i128>

Performs the | operation.

impl BitOr for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i16>) -> Saturating<i16>

Performs the | operation.

impl BitOr for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i32>) -> Saturating<i32>

Performs the | operation.

impl BitOr for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i64>) -> Saturating<i64>

Performs the | operation.

impl BitOr for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<i8>) -> Saturating<i8>

Performs the | operation.

impl BitOr for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<isize>) -> Saturating<isize>

Performs the | operation.

impl BitOr for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u128>) -> Saturating<u128>

Performs the | operation.

impl BitOr for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u16>) -> Saturating<u16>

Performs the | operation.

impl BitOr for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u32>) -> Saturating<u32>

Performs the | operation.

impl BitOr for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u64>) -> Saturating<u64>

Performs the | operation.

impl BitOr for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<u8>) -> Saturating<u8>

Performs the | operation.

impl BitOr for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the | operator.

fn bitor(self, other: Saturating<usize>) -> Saturating<usize>

Performs the | operation.

impl BitOrAssign<&Saturating<i128>> for Saturating<i128>

fn bitor_assign(&mut self, other: &Saturating<i128>)

Performs the |= operation.

impl BitOrAssign<&Saturating<i16>> for Saturating<i16>

fn bitor_assign(&mut self, other: &Saturating<i16>)

Performs the |= operation.

impl BitOrAssign<&Saturating<i32>> for Saturating<i32>

fn bitor_assign(&mut self, other: &Saturating<i32>)

Performs the |= operation.

impl BitOrAssign<&Saturating<i64>> for Saturating<i64>

fn bitor_assign(&mut self, other: &Saturating<i64>)

Performs the |= operation.

impl BitOrAssign<&Saturating<i8>> for Saturating<i8>

fn bitor_assign(&mut self, other: &Saturating<i8>)

Performs the |= operation.

impl BitOrAssign<&Saturating<isize>> for Saturating<isize>

fn bitor_assign(&mut self, other: &Saturating<isize>)

Performs the |= operation.

impl BitOrAssign<&Saturating<u128>> for Saturating<u128>

fn bitor_assign(&mut self, other: &Saturating<u128>)

Performs the |= operation.

impl BitOrAssign<&Saturating<u16>> for Saturating<u16>

fn bitor_assign(&mut self, other: &Saturating<u16>)

Performs the |= operation.

impl BitOrAssign<&Saturating<u32>> for Saturating<u32>

fn bitor_assign(&mut self, other: &Saturating<u32>)

Performs the |= operation.

impl BitOrAssign<&Saturating<u64>> for Saturating<u64>

fn bitor_assign(&mut self, other: &Saturating<u64>)

Performs the |= operation.

impl BitOrAssign<&Saturating<u8>> for Saturating<u8>

fn bitor_assign(&mut self, other: &Saturating<u8>)

Performs the |= operation.

impl BitOrAssign<&Saturating<usize>> for Saturating<usize>

fn bitor_assign(&mut self, other: &Saturating<usize>)

Performs the |= operation.

impl BitOrAssign<&i128> for Saturating<i128>

fn bitor_assign(&mut self, other: &i128)

Performs the |= operation.

impl BitOrAssign<&i16> for Saturating<i16>

fn bitor_assign(&mut self, other: &i16)

Performs the |= operation.

impl BitOrAssign<&i32> for Saturating<i32>

fn bitor_assign(&mut self, other: &i32)

Performs the |= operation.

impl BitOrAssign<&i64> for Saturating<i64>

fn bitor_assign(&mut self, other: &i64)

Performs the |= operation.

impl BitOrAssign<&i8> for Saturating<i8>

fn bitor_assign(&mut self, other: &i8)

Performs the |= operation.

impl BitOrAssign<&isize> for Saturating<isize>

fn bitor_assign(&mut self, other: &isize)

Performs the |= operation.

impl BitOrAssign<&u128> for Saturating<u128>

fn bitor_assign(&mut self, other: &u128)

Performs the |= operation.

impl BitOrAssign<&u16> for Saturating<u16>

fn bitor_assign(&mut self, other: &u16)

Performs the |= operation.

impl BitOrAssign<&u32> for Saturating<u32>

fn bitor_assign(&mut self, other: &u32)

Performs the |= operation.

impl BitOrAssign<&u64> for Saturating<u64>

fn bitor_assign(&mut self, other: &u64)

Performs the |= operation.

impl BitOrAssign<&u8> for Saturating<u8>

fn bitor_assign(&mut self, other: &u8)

Performs the |= operation.

impl BitOrAssign<&usize> for Saturating<usize>

fn bitor_assign(&mut self, other: &usize)

Performs the |= operation.

impl BitOrAssign<i128> for Saturating<i128>

fn bitor_assign(&mut self, other: i128)

Performs the |= operation.

impl BitOrAssign<i16> for Saturating<i16>

fn bitor_assign(&mut self, other: i16)

Performs the |= operation.

impl BitOrAssign<i32> for Saturating<i32>

fn bitor_assign(&mut self, other: i32)

Performs the |= operation.

impl BitOrAssign<i64> for Saturating<i64>

fn bitor_assign(&mut self, other: i64)

Performs the |= operation.

impl BitOrAssign<i8> for Saturating<i8>

fn bitor_assign(&mut self, other: i8)

Performs the |= operation.

impl BitOrAssign<isize> for Saturating<isize>

fn bitor_assign(&mut self, other: isize)

Performs the |= operation.

impl BitOrAssign<u128> for Saturating<u128>

fn bitor_assign(&mut self, other: u128)

Performs the |= operation.

impl BitOrAssign<u16> for Saturating<u16>

fn bitor_assign(&mut self, other: u16)

Performs the |= operation.

impl BitOrAssign<u32> for Saturating<u32>

fn bitor_assign(&mut self, other: u32)

Performs the |= operation.

impl BitOrAssign<u64> for Saturating<u64>

fn bitor_assign(&mut self, other: u64)

Performs the |= operation.

impl BitOrAssign<u8> for Saturating<u8>

fn bitor_assign(&mut self, other: u8)

Performs the |= operation.

impl BitOrAssign<usize> for Saturating<usize>

fn bitor_assign(&mut self, other: usize)

Performs the |= operation.

impl BitOrAssign for Saturating<i128>

fn bitor_assign(&mut self, other: Saturating<i128>)

Performs the |= operation.

impl BitOrAssign for Saturating<i16>

fn bitor_assign(&mut self, other: Saturating<i16>)

Performs the |= operation.

impl BitOrAssign for Saturating<i32>

fn bitor_assign(&mut self, other: Saturating<i32>)

Performs the |= operation.

impl BitOrAssign for Saturating<i64>

fn bitor_assign(&mut self, other: Saturating<i64>)

Performs the |= operation.

impl BitOrAssign for Saturating<i8>

fn bitor_assign(&mut self, other: Saturating<i8>)

Performs the |= operation.

impl BitOrAssign for Saturating<isize>

fn bitor_assign(&mut self, other: Saturating<isize>)

Performs the |= operation.

impl BitOrAssign for Saturating<u128>

fn bitor_assign(&mut self, other: Saturating<u128>)

Performs the |= operation.

impl BitOrAssign for Saturating<u16>

fn bitor_assign(&mut self, other: Saturating<u16>)

Performs the |= operation.

impl BitOrAssign for Saturating<u32>

fn bitor_assign(&mut self, other: Saturating<u32>)

Performs the |= operation.

impl BitOrAssign for Saturating<u64>

fn bitor_assign(&mut self, other: Saturating<u64>)

Performs the |= operation.

impl BitOrAssign for Saturating<u8>

fn bitor_assign(&mut self, other: Saturating<u8>)

Performs the |= operation.

impl BitOrAssign for Saturating<usize>

fn bitor_assign(&mut self, other: Saturating<usize>)

Performs the |= operation.

impl BitXor<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<i128>, ) -> <Saturating<i128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<i128>, ) -> <Saturating<i128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i16>) -> <Saturating<i16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i16>) -> <Saturating<i16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i32>) -> <Saturating<i32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i32>) -> <Saturating<i32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i64>) -> <Saturating<i64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i64>) -> <Saturating<i64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i8>) -> <Saturating<i8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<i8>) -> <Saturating<i8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<isize>, ) -> <Saturating<isize> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<isize>, ) -> <Saturating<isize> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<u128>, ) -> <Saturating<u128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<u128>, ) -> <Saturating<u128> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u16>) -> <Saturating<u16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u16>) -> <Saturating<u16> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u32>) -> <Saturating<u32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u32>) -> <Saturating<u32> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u64>) -> <Saturating<u64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u64>) -> <Saturating<u64> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u8>) -> <Saturating<u8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: &Saturating<u8>) -> <Saturating<u8> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<usize>, ) -> <Saturating<usize> as BitXor>::Output

Performs the ^ operation.

impl BitXor<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: &Saturating<usize>, ) -> <Saturating<usize> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i128>) -> <Saturating<i128> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i16>) -> <Saturating<i16> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i32>) -> <Saturating<i32> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i64>) -> <Saturating<i64> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i8>) -> <Saturating<i8> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: Saturating<isize>, ) -> <Saturating<isize> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u128>) -> <Saturating<u128> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u16>) -> <Saturating<u16> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u32>) -> <Saturating<u32> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u64>) -> <Saturating<u64> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u8>) -> <Saturating<u8> as BitXor>::Output

Performs the ^ operation.

impl<'a> BitXor<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as BitXor>::Output

The resulting type after applying the ^ operator.

fn bitxor( self, other: Saturating<usize>, ) -> <Saturating<usize> as BitXor>::Output

Performs the ^ operation.

impl BitXor for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i128>) -> Saturating<i128>

Performs the ^ operation.

impl BitXor for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i16>) -> Saturating<i16>

Performs the ^ operation.

impl BitXor for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i32>) -> Saturating<i32>

Performs the ^ operation.

impl BitXor for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i64>) -> Saturating<i64>

Performs the ^ operation.

impl BitXor for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<i8>) -> Saturating<i8>

Performs the ^ operation.

impl BitXor for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<isize>) -> Saturating<isize>

Performs the ^ operation.

impl BitXor for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u128>) -> Saturating<u128>

Performs the ^ operation.

impl BitXor for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u16>) -> Saturating<u16>

Performs the ^ operation.

impl BitXor for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u32>) -> Saturating<u32>

Performs the ^ operation.

impl BitXor for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u64>) -> Saturating<u64>

Performs the ^ operation.

impl BitXor for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<u8>) -> Saturating<u8>

Performs the ^ operation.

impl BitXor for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Saturating<usize>) -> Saturating<usize>

Performs the ^ operation.

impl BitXorAssign<&Saturating<i128>> for Saturating<i128>

fn bitxor_assign(&mut self, other: &Saturating<i128>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<i16>> for Saturating<i16>

fn bitxor_assign(&mut self, other: &Saturating<i16>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<i32>> for Saturating<i32>

fn bitxor_assign(&mut self, other: &Saturating<i32>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<i64>> for Saturating<i64>

fn bitxor_assign(&mut self, other: &Saturating<i64>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<i8>> for Saturating<i8>

fn bitxor_assign(&mut self, other: &Saturating<i8>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<isize>> for Saturating<isize>

fn bitxor_assign(&mut self, other: &Saturating<isize>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<u128>> for Saturating<u128>

fn bitxor_assign(&mut self, other: &Saturating<u128>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<u16>> for Saturating<u16>

fn bitxor_assign(&mut self, other: &Saturating<u16>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<u32>> for Saturating<u32>

fn bitxor_assign(&mut self, other: &Saturating<u32>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<u64>> for Saturating<u64>

fn bitxor_assign(&mut self, other: &Saturating<u64>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<u8>> for Saturating<u8>

fn bitxor_assign(&mut self, other: &Saturating<u8>)

Performs the ^= operation.

impl BitXorAssign<&Saturating<usize>> for Saturating<usize>

fn bitxor_assign(&mut self, other: &Saturating<usize>)

Performs the ^= operation.

impl BitXorAssign<&i128> for Saturating<i128>

fn bitxor_assign(&mut self, other: &i128)

Performs the ^= operation.

impl BitXorAssign<&i16> for Saturating<i16>

fn bitxor_assign(&mut self, other: &i16)

Performs the ^= operation.

impl BitXorAssign<&i32> for Saturating<i32>

fn bitxor_assign(&mut self, other: &i32)

Performs the ^= operation.

impl BitXorAssign<&i64> for Saturating<i64>

fn bitxor_assign(&mut self, other: &i64)

Performs the ^= operation.

impl BitXorAssign<&i8> for Saturating<i8>

fn bitxor_assign(&mut self, other: &i8)

Performs the ^= operation.

impl BitXorAssign<&isize> for Saturating<isize>

fn bitxor_assign(&mut self, other: &isize)

Performs the ^= operation.

impl BitXorAssign<&u128> for Saturating<u128>

fn bitxor_assign(&mut self, other: &u128)

Performs the ^= operation.

impl BitXorAssign<&u16> for Saturating<u16>

fn bitxor_assign(&mut self, other: &u16)

Performs the ^= operation.

impl BitXorAssign<&u32> for Saturating<u32>

fn bitxor_assign(&mut self, other: &u32)

Performs the ^= operation.

impl BitXorAssign<&u64> for Saturating<u64>

fn bitxor_assign(&mut self, other: &u64)

Performs the ^= operation.

impl BitXorAssign<&u8> for Saturating<u8>

fn bitxor_assign(&mut self, other: &u8)

Performs the ^= operation.

impl BitXorAssign<&usize> for Saturating<usize>

fn bitxor_assign(&mut self, other: &usize)

Performs the ^= operation.

impl BitXorAssign<i128> for Saturating<i128>

fn bitxor_assign(&mut self, other: i128)

Performs the ^= operation.

impl BitXorAssign<i16> for Saturating<i16>

fn bitxor_assign(&mut self, other: i16)

Performs the ^= operation.

impl BitXorAssign<i32> for Saturating<i32>

fn bitxor_assign(&mut self, other: i32)

Performs the ^= operation.

impl BitXorAssign<i64> for Saturating<i64>

fn bitxor_assign(&mut self, other: i64)

Performs the ^= operation.

impl BitXorAssign<i8> for Saturating<i8>

fn bitxor_assign(&mut self, other: i8)

Performs the ^= operation.

impl BitXorAssign<isize> for Saturating<isize>

fn bitxor_assign(&mut self, other: isize)

Performs the ^= operation.

impl BitXorAssign<u128> for Saturating<u128>

fn bitxor_assign(&mut self, other: u128)

Performs the ^= operation.

impl BitXorAssign<u16> for Saturating<u16>

fn bitxor_assign(&mut self, other: u16)

Performs the ^= operation.

impl BitXorAssign<u32> for Saturating<u32>

fn bitxor_assign(&mut self, other: u32)

Performs the ^= operation.

impl BitXorAssign<u64> for Saturating<u64>

fn bitxor_assign(&mut self, other: u64)

Performs the ^= operation.

impl BitXorAssign<u8> for Saturating<u8>

fn bitxor_assign(&mut self, other: u8)

Performs the ^= operation.

impl BitXorAssign<usize> for Saturating<usize>

fn bitxor_assign(&mut self, other: usize)

Performs the ^= operation.

impl BitXorAssign for Saturating<i128>

fn bitxor_assign(&mut self, other: Saturating<i128>)

Performs the ^= operation.

impl BitXorAssign for Saturating<i16>

fn bitxor_assign(&mut self, other: Saturating<i16>)

Performs the ^= operation.

impl BitXorAssign for Saturating<i32>

fn bitxor_assign(&mut self, other: Saturating<i32>)

Performs the ^= operation.

impl BitXorAssign for Saturating<i64>

fn bitxor_assign(&mut self, other: Saturating<i64>)

Performs the ^= operation.

impl BitXorAssign for Saturating<i8>

fn bitxor_assign(&mut self, other: Saturating<i8>)

Performs the ^= operation.

impl BitXorAssign for Saturating<isize>

fn bitxor_assign(&mut self, other: Saturating<isize>)

Performs the ^= operation.

impl BitXorAssign for Saturating<u128>

fn bitxor_assign(&mut self, other: Saturating<u128>)

Performs the ^= operation.

impl BitXorAssign for Saturating<u16>

fn bitxor_assign(&mut self, other: Saturating<u16>)

Performs the ^= operation.

impl BitXorAssign for Saturating<u32>

fn bitxor_assign(&mut self, other: Saturating<u32>)

Performs the ^= operation.

impl BitXorAssign for Saturating<u64>

fn bitxor_assign(&mut self, other: Saturating<u64>)

Performs the ^= operation.

impl BitXorAssign for Saturating<u8>

fn bitxor_assign(&mut self, other: Saturating<u8>)

Performs the ^= operation.

impl BitXorAssign for Saturating<usize>

fn bitxor_assign(&mut self, other: Saturating<usize>)

Performs the ^= operation.

impl<T> Clone for Saturating<T>

where T: Clone,

fn clone(&self) -> Saturating<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Saturating<T>

where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Default for Saturating<T>

where T: Default,

fn default() -> Saturating<T>

Returns the “default value” for a type.

impl<T> Display for Saturating<T>

where T: Display,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Div<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i128>) -> <Saturating<i128> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i128>) -> <Saturating<i128> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i16>) -> <Saturating<i16> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i16>) -> <Saturating<i16> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i32>) -> <Saturating<i32> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i32>) -> <Saturating<i32> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i64>) -> <Saturating<i64> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i64>) -> <Saturating<i64> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i8>) -> <Saturating<i8> as Div>::Output

Performs the / operation.

impl Div<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<i8>) -> <Saturating<i8> as Div>::Output

Performs the / operation.

impl Div<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<isize>) -> <Saturating<isize> as Div>::Output

Performs the / operation.

impl Div<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<isize>) -> <Saturating<isize> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u128>) -> <Saturating<u128> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u128>) -> <Saturating<u128> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u16>) -> <Saturating<u16> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u16>) -> <Saturating<u16> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u32>) -> <Saturating<u32> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u32>) -> <Saturating<u32> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u64>) -> <Saturating<u64> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u64>) -> <Saturating<u64> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u8>) -> <Saturating<u8> as Div>::Output

Performs the / operation.

impl Div<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<u8>) -> <Saturating<u8> as Div>::Output

Performs the / operation.

impl Div<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<usize>) -> <Saturating<usize> as Div>::Output

Performs the / operation.

impl Div<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: &Saturating<usize>) -> <Saturating<usize> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<i128>) -> <Saturating<i128> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<i16>) -> <Saturating<i16> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<i32>) -> <Saturating<i32> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<i64>) -> <Saturating<i64> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<i8>) -> <Saturating<i8> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<isize>) -> <Saturating<isize> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<u128>) -> <Saturating<u128> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<u16>) -> <Saturating<u16> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<u32>) -> <Saturating<u32> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<u64>) -> <Saturating<u64> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<u8>) -> <Saturating<u8> as Div>::Output

Performs the / operation.

impl<'a> Div<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as Div>::Output

The resulting type after applying the / operator.

fn div(self, other: Saturating<usize>) -> <Saturating<usize> as Div>::Output

Performs the / operation.

impl Div for Saturating<i128>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2i128), Saturating(5i128) / Saturating(2));
assert_eq!(Saturating(i128::MAX), Saturating(i128::MAX) / Saturating(1));
assert_eq!(Saturating(i128::MIN), Saturating(i128::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0i128) / Saturating(0);

type Output = Saturating<i128>

The resulting type after applying the / operator.

fn div(self, other: Saturating<i128>) -> Saturating<i128>

Performs the / operation.

impl Div for Saturating<i16>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2i16), Saturating(5i16) / Saturating(2));
assert_eq!(Saturating(i16::MAX), Saturating(i16::MAX) / Saturating(1));
assert_eq!(Saturating(i16::MIN), Saturating(i16::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0i16) / Saturating(0);

type Output = Saturating<i16>

The resulting type after applying the / operator.

fn div(self, other: Saturating<i16>) -> Saturating<i16>

Performs the / operation.

impl Div for Saturating<i32>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2i32), Saturating(5i32) / Saturating(2));
assert_eq!(Saturating(i32::MAX), Saturating(i32::MAX) / Saturating(1));
assert_eq!(Saturating(i32::MIN), Saturating(i32::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0i32) / Saturating(0);

type Output = Saturating<i32>

The resulting type after applying the / operator.

fn div(self, other: Saturating<i32>) -> Saturating<i32>

Performs the / operation.

impl Div for Saturating<i64>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2i64), Saturating(5i64) / Saturating(2));
assert_eq!(Saturating(i64::MAX), Saturating(i64::MAX) / Saturating(1));
assert_eq!(Saturating(i64::MIN), Saturating(i64::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0i64) / Saturating(0);

type Output = Saturating<i64>

The resulting type after applying the / operator.

fn div(self, other: Saturating<i64>) -> Saturating<i64>

Performs the / operation.

impl Div for Saturating<i8>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2i8), Saturating(5i8) / Saturating(2));
assert_eq!(Saturating(i8::MAX), Saturating(i8::MAX) / Saturating(1));
assert_eq!(Saturating(i8::MIN), Saturating(i8::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0i8) / Saturating(0);

type Output = Saturating<i8>

The resulting type after applying the / operator.

fn div(self, other: Saturating<i8>) -> Saturating<i8>

Performs the / operation.

impl Div for Saturating<isize>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2isize), Saturating(5isize) / Saturating(2));
assert_eq!(Saturating(isize::MAX), Saturating(isize::MAX) / Saturating(1));
assert_eq!(Saturating(isize::MIN), Saturating(isize::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0isize) / Saturating(0);

type Output = Saturating<isize>

The resulting type after applying the / operator.

fn div(self, other: Saturating<isize>) -> Saturating<isize>

Performs the / operation.

impl Div for Saturating<u128>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2u128), Saturating(5u128) / Saturating(2));
assert_eq!(Saturating(u128::MAX), Saturating(u128::MAX) / Saturating(1));
assert_eq!(Saturating(u128::MIN), Saturating(u128::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0u128) / Saturating(0);

type Output = Saturating<u128>

The resulting type after applying the / operator.

fn div(self, other: Saturating<u128>) -> Saturating<u128>

Performs the / operation.

impl Div for Saturating<u16>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2u16), Saturating(5u16) / Saturating(2));
assert_eq!(Saturating(u16::MAX), Saturating(u16::MAX) / Saturating(1));
assert_eq!(Saturating(u16::MIN), Saturating(u16::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0u16) / Saturating(0);

type Output = Saturating<u16>

The resulting type after applying the / operator.

fn div(self, other: Saturating<u16>) -> Saturating<u16>

Performs the / operation.

impl Div for Saturating<u32>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2u32), Saturating(5u32) / Saturating(2));
assert_eq!(Saturating(u32::MAX), Saturating(u32::MAX) / Saturating(1));
assert_eq!(Saturating(u32::MIN), Saturating(u32::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0u32) / Saturating(0);

type Output = Saturating<u32>

The resulting type after applying the / operator.

fn div(self, other: Saturating<u32>) -> Saturating<u32>

Performs the / operation.

impl Div for Saturating<u64>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2u64), Saturating(5u64) / Saturating(2));
assert_eq!(Saturating(u64::MAX), Saturating(u64::MAX) / Saturating(1));
assert_eq!(Saturating(u64::MIN), Saturating(u64::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0u64) / Saturating(0);

type Output = Saturating<u64>

The resulting type after applying the / operator.

fn div(self, other: Saturating<u64>) -> Saturating<u64>

Performs the / operation.

impl Div for Saturating<u8>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2u8), Saturating(5u8) / Saturating(2));
assert_eq!(Saturating(u8::MAX), Saturating(u8::MAX) / Saturating(1));
assert_eq!(Saturating(u8::MIN), Saturating(u8::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0u8) / Saturating(0);

type Output = Saturating<u8>

The resulting type after applying the / operator.

fn div(self, other: Saturating<u8>) -> Saturating<u8>

Performs the / operation.

impl Div for Saturating<usize>

Examples

Basic usage:

use std::num::Saturating;

assert_eq!(Saturating(2usize), Saturating(5usize) / Saturating(2));
assert_eq!(Saturating(usize::MAX), Saturating(usize::MAX) / Saturating(1));
assert_eq!(Saturating(usize::MIN), Saturating(usize::MIN) / Saturating(1));

use std::num::Saturating;

let _ = Saturating(0usize) / Saturating(0);

type Output = Saturating<usize>

The resulting type after applying the / operator.

fn div(self, other: Saturating<usize>) -> Saturating<usize>

Performs the / operation.

impl DivAssign<&Saturating<i128>> for Saturating<i128>

fn div_assign(&mut self, other: &Saturating<i128>)

Performs the /= operation.

impl DivAssign<&Saturating<i16>> for Saturating<i16>

fn div_assign(&mut self, other: &Saturating<i16>)

Performs the /= operation.

impl DivAssign<&Saturating<i32>> for Saturating<i32>

fn div_assign(&mut self, other: &Saturating<i32>)

Performs the /= operation.

impl DivAssign<&Saturating<i64>> for Saturating<i64>

fn div_assign(&mut self, other: &Saturating<i64>)

Performs the /= operation.

impl DivAssign<&Saturating<i8>> for Saturating<i8>

fn div_assign(&mut self, other: &Saturating<i8>)

Performs the /= operation.

impl DivAssign<&Saturating<isize>> for Saturating<isize>

fn div_assign(&mut self, other: &Saturating<isize>)

Performs the /= operation.

impl DivAssign<&Saturating<u128>> for Saturating<u128>

fn div_assign(&mut self, other: &Saturating<u128>)

Performs the /= operation.

impl DivAssign<&Saturating<u16>> for Saturating<u16>

fn div_assign(&mut self, other: &Saturating<u16>)

Performs the /= operation.

impl DivAssign<&Saturating<u32>> for Saturating<u32>

fn div_assign(&mut self, other: &Saturating<u32>)

Performs the /= operation.

impl DivAssign<&Saturating<u64>> for Saturating<u64>

fn div_assign(&mut self, other: &Saturating<u64>)

Performs the /= operation.

impl DivAssign<&Saturating<u8>> for Saturating<u8>

fn div_assign(&mut self, other: &Saturating<u8>)

Performs the /= operation.

impl DivAssign<&Saturating<usize>> for Saturating<usize>

fn div_assign(&mut self, other: &Saturating<usize>)

Performs the /= operation.

impl DivAssign<&i128> for Saturating<i128>

fn div_assign(&mut self, other: &i128)

Performs the /= operation.

impl DivAssign<&i16> for Saturating<i16>

fn div_assign(&mut self, other: &i16)

Performs the /= operation.

impl DivAssign<&i32> for Saturating<i32>

fn div_assign(&mut self, other: &i32)

Performs the /= operation.

impl DivAssign<&i64> for Saturating<i64>

fn div_assign(&mut self, other: &i64)

Performs the /= operation.

impl DivAssign<&i8> for Saturating<i8>

fn div_assign(&mut self, other: &i8)

Performs the /= operation.

impl DivAssign<&isize> for Saturating<isize>

fn div_assign(&mut self, other: &isize)

Performs the /= operation.

impl DivAssign<&u128> for Saturating<u128>

fn div_assign(&mut self, other: &u128)

Performs the /= operation.

impl DivAssign<&u16> for Saturating<u16>

fn div_assign(&mut self, other: &u16)

Performs the /= operation.

impl DivAssign<&u32> for Saturating<u32>

fn div_assign(&mut self, other: &u32)

Performs the /= operation.

impl DivAssign<&u64> for Saturating<u64>

fn div_assign(&mut self, other: &u64)

Performs the /= operation.

impl DivAssign<&u8> for Saturating<u8>

fn div_assign(&mut self, other: &u8)

Performs the /= operation.

impl DivAssign<&usize> for Saturating<usize>

fn div_assign(&mut self, other: &usize)

Performs the /= operation.

impl DivAssign<i128> for Saturating<i128>

fn div_assign(&mut self, other: i128)

Performs the /= operation.

impl DivAssign<i16> for Saturating<i16>

fn div_assign(&mut self, other: i16)

Performs the /= operation.

impl DivAssign<i32> for Saturating<i32>

fn div_assign(&mut self, other: i32)

Performs the /= operation.

impl DivAssign<i64> for Saturating<i64>

fn div_assign(&mut self, other: i64)

Performs the /= operation.

impl DivAssign<i8> for Saturating<i8>

fn div_assign(&mut self, other: i8)

Performs the /= operation.

impl DivAssign<isize> for Saturating<isize>

fn div_assign(&mut self, other: isize)

Performs the /= operation.

impl DivAssign<u128> for Saturating<u128>

fn div_assign(&mut self, other: u128)

Performs the /= operation.

impl DivAssign<u16> for Saturating<u16>

fn div_assign(&mut self, other: u16)

Performs the /= operation.

impl DivAssign<u32> for Saturating<u32>

fn div_assign(&mut self, other: u32)

Performs the /= operation.

impl DivAssign<u64> for Saturating<u64>

fn div_assign(&mut self, other: u64)

Performs the /= operation.

impl DivAssign<u8> for Saturating<u8>

fn div_assign(&mut self, other: u8)

Performs the /= operation.

impl DivAssign<usize> for Saturating<usize>

fn div_assign(&mut self, other: usize)

Performs the /= operation.

impl DivAssign for Saturating<i128>

fn div_assign(&mut self, other: Saturating<i128>)

Performs the /= operation.

impl DivAssign for Saturating<i16>

fn div_assign(&mut self, other: Saturating<i16>)

Performs the /= operation.

impl DivAssign for Saturating<i32>

fn div_assign(&mut self, other: Saturating<i32>)

Performs the /= operation.

impl DivAssign for Saturating<i64>

fn div_assign(&mut self, other: Saturating<i64>)

Performs the /= operation.

impl DivAssign for Saturating<i8>

fn div_assign(&mut self, other: Saturating<i8>)

Performs the /= operation.

impl DivAssign for Saturating<isize>

fn div_assign(&mut self, other: Saturating<isize>)

Performs the /= operation.

impl DivAssign for Saturating<u128>

fn div_assign(&mut self, other: Saturating<u128>)

Performs the /= operation.

impl DivAssign for Saturating<u16>

fn div_assign(&mut self, other: Saturating<u16>)

Performs the /= operation.

impl DivAssign for Saturating<u32>

fn div_assign(&mut self, other: Saturating<u32>)

Performs the /= operation.

impl DivAssign for Saturating<u64>

fn div_assign(&mut self, other: Saturating<u64>)

Performs the /= operation.

impl DivAssign for Saturating<u8>

fn div_assign(&mut self, other: Saturating<u8>)

Performs the /= operation.

impl DivAssign for Saturating<usize>

fn div_assign(&mut self, other: Saturating<usize>)

Performs the /= operation.

impl<T> Hash for Saturating<T>

where T: Hash,

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<T> LowerHex for Saturating<T>

where T: LowerHex,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Mul<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i128>) -> <Saturating<i128> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i128>) -> <Saturating<i128> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i16>) -> <Saturating<i16> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i16>) -> <Saturating<i16> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i32>) -> <Saturating<i32> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i32>) -> <Saturating<i32> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i64>) -> <Saturating<i64> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i64>) -> <Saturating<i64> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i8>) -> <Saturating<i8> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<i8>) -> <Saturating<i8> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<isize>) -> <Saturating<isize> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<isize>) -> <Saturating<isize> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u128>) -> <Saturating<u128> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u128>) -> <Saturating<u128> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u16>) -> <Saturating<u16> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u16>) -> <Saturating<u16> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u32>) -> <Saturating<u32> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u32>) -> <Saturating<u32> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u64>) -> <Saturating<u64> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u64>) -> <Saturating<u64> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u8>) -> <Saturating<u8> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<u8>) -> <Saturating<u8> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<usize>) -> <Saturating<usize> as Mul>::Output

Performs the * operation.

impl Mul<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: &Saturating<usize>) -> <Saturating<usize> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i128>) -> <Saturating<i128> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i16>) -> <Saturating<i16> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i32>) -> <Saturating<i32> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i64>) -> <Saturating<i64> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i8>) -> <Saturating<i8> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<isize>) -> <Saturating<isize> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u128>) -> <Saturating<u128> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u16>) -> <Saturating<u16> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u32>) -> <Saturating<u32> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u64>) -> <Saturating<u64> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u8>) -> <Saturating<u8> as Mul>::Output

Performs the * operation.

impl<'a> Mul<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as Mul>::Output

The resulting type after applying the * operator.

fn mul(self, other: Saturating<usize>) -> <Saturating<usize> as Mul>::Output

Performs the * operation.

impl Mul for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i128>) -> Saturating<i128>

Performs the * operation.

impl Mul for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i16>) -> Saturating<i16>

Performs the * operation.

impl Mul for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i32>) -> Saturating<i32>

Performs the * operation.

impl Mul for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i64>) -> Saturating<i64>

Performs the * operation.

impl Mul for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<i8>) -> Saturating<i8>

Performs the * operation.

impl Mul for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<isize>) -> Saturating<isize>

Performs the * operation.

impl Mul for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u128>) -> Saturating<u128>

Performs the * operation.

impl Mul for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u16>) -> Saturating<u16>

Performs the * operation.

impl Mul for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u32>) -> Saturating<u32>

Performs the * operation.

impl Mul for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u64>) -> Saturating<u64>

Performs the * operation.

impl Mul for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<u8>) -> Saturating<u8>

Performs the * operation.

impl Mul for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the * operator.

fn mul(self, other: Saturating<usize>) -> Saturating<usize>

Performs the * operation.

impl MulAssign<&Saturating<i128>> for Saturating<i128>

fn mul_assign(&mut self, other: &Saturating<i128>)

Performs the *= operation.

impl MulAssign<&Saturating<i16>> for Saturating<i16>

fn mul_assign(&mut self, other: &Saturating<i16>)

Performs the *= operation.

impl MulAssign<&Saturating<i32>> for Saturating<i32>

fn mul_assign(&mut self, other: &Saturating<i32>)

Performs the *= operation.

impl MulAssign<&Saturating<i64>> for Saturating<i64>

fn mul_assign(&mut self, other: &Saturating<i64>)

Performs the *= operation.

impl MulAssign<&Saturating<i8>> for Saturating<i8>

fn mul_assign(&mut self, other: &Saturating<i8>)

Performs the *= operation.

impl MulAssign<&Saturating<isize>> for Saturating<isize>

fn mul_assign(&mut self, other: &Saturating<isize>)

Performs the *= operation.

impl MulAssign<&Saturating<u128>> for Saturating<u128>

fn mul_assign(&mut self, other: &Saturating<u128>)

Performs the *= operation.

impl MulAssign<&Saturating<u16>> for Saturating<u16>

fn mul_assign(&mut self, other: &Saturating<u16>)

Performs the *= operation.

impl MulAssign<&Saturating<u32>> for Saturating<u32>

fn mul_assign(&mut self, other: &Saturating<u32>)

Performs the *= operation.

impl MulAssign<&Saturating<u64>> for Saturating<u64>

fn mul_assign(&mut self, other: &Saturating<u64>)

Performs the *= operation.

impl MulAssign<&Saturating<u8>> for Saturating<u8>

fn mul_assign(&mut self, other: &Saturating<u8>)

Performs the *= operation.

impl MulAssign<&Saturating<usize>> for Saturating<usize>

fn mul_assign(&mut self, other: &Saturating<usize>)

Performs the *= operation.

impl MulAssign<&i128> for Saturating<i128>

fn mul_assign(&mut self, other: &i128)

Performs the *= operation.

impl MulAssign<&i16> for Saturating<i16>

fn mul_assign(&mut self, other: &i16)

Performs the *= operation.

impl MulAssign<&i32> for Saturating<i32>

fn mul_assign(&mut self, other: &i32)

Performs the *= operation.

impl MulAssign<&i64> for Saturating<i64>

fn mul_assign(&mut self, other: &i64)

Performs the *= operation.

impl MulAssign<&i8> for Saturating<i8>

fn mul_assign(&mut self, other: &i8)

Performs the *= operation.

impl MulAssign<&isize> for Saturating<isize>

fn mul_assign(&mut self, other: &isize)

Performs the *= operation.

impl MulAssign<&u128> for Saturating<u128>

fn mul_assign(&mut self, other: &u128)

Performs the *= operation.

impl MulAssign<&u16> for Saturating<u16>

fn mul_assign(&mut self, other: &u16)

Performs the *= operation.

impl MulAssign<&u32> for Saturating<u32>

fn mul_assign(&mut self, other: &u32)

Performs the *= operation.

impl MulAssign<&u64> for Saturating<u64>

fn mul_assign(&mut self, other: &u64)

Performs the *= operation.

impl MulAssign<&u8> for Saturating<u8>

fn mul_assign(&mut self, other: &u8)

Performs the *= operation.

impl MulAssign<&usize> for Saturating<usize>

fn mul_assign(&mut self, other: &usize)

Performs the *= operation.

impl MulAssign<i128> for Saturating<i128>

fn mul_assign(&mut self, other: i128)

Performs the *= operation.

impl MulAssign<i16> for Saturating<i16>

fn mul_assign(&mut self, other: i16)

Performs the *= operation.

impl MulAssign<i32> for Saturating<i32>

fn mul_assign(&mut self, other: i32)

Performs the *= operation.

impl MulAssign<i64> for Saturating<i64>

fn mul_assign(&mut self, other: i64)

Performs the *= operation.

impl MulAssign<i8> for Saturating<i8>

fn mul_assign(&mut self, other: i8)

Performs the *= operation.

impl MulAssign<isize> for Saturating<isize>

fn mul_assign(&mut self, other: isize)

Performs the *= operation.

impl MulAssign<u128> for Saturating<u128>

fn mul_assign(&mut self, other: u128)

Performs the *= operation.

impl MulAssign<u16> for Saturating<u16>

fn mul_assign(&mut self, other: u16)

Performs the *= operation.

impl MulAssign<u32> for Saturating<u32>

fn mul_assign(&mut self, other: u32)

Performs the *= operation.

impl MulAssign<u64> for Saturating<u64>

fn mul_assign(&mut self, other: u64)

Performs the *= operation.

impl MulAssign<u8> for Saturating<u8>

fn mul_assign(&mut self, other: u8)

Performs the *= operation.

impl MulAssign<usize> for Saturating<usize>

fn mul_assign(&mut self, other: usize)

Performs the *= operation.

impl MulAssign for Saturating<i128>

fn mul_assign(&mut self, other: Saturating<i128>)

Performs the *= operation.

impl MulAssign for Saturating<i16>

fn mul_assign(&mut self, other: Saturating<i16>)

Performs the *= operation.

impl MulAssign for Saturating<i32>

fn mul_assign(&mut self, other: Saturating<i32>)

Performs the *= operation.

impl MulAssign for Saturating<i64>

fn mul_assign(&mut self, other: Saturating<i64>)

Performs the *= operation.

impl MulAssign for Saturating<i8>

fn mul_assign(&mut self, other: Saturating<i8>)

Performs the *= operation.

impl MulAssign for Saturating<isize>

fn mul_assign(&mut self, other: Saturating<isize>)

Performs the *= operation.

impl MulAssign for Saturating<u128>

fn mul_assign(&mut self, other: Saturating<u128>)

Performs the *= operation.

impl MulAssign for Saturating<u16>

fn mul_assign(&mut self, other: Saturating<u16>)

Performs the *= operation.

impl MulAssign for Saturating<u32>

fn mul_assign(&mut self, other: Saturating<u32>)

Performs the *= operation.

impl MulAssign for Saturating<u64>

fn mul_assign(&mut self, other: Saturating<u64>)

Performs the *= operation.

impl MulAssign for Saturating<u8>

fn mul_assign(&mut self, other: Saturating<u8>)

Performs the *= operation.

impl MulAssign for Saturating<usize>

fn mul_assign(&mut self, other: Saturating<usize>)

Performs the *= operation.

impl Neg for &Saturating<i128>

type Output = <Saturating<i128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Saturating<i128> as Neg>::Output

Performs the unary - operation.

impl Neg for &Saturating<i16>

type Output = <Saturating<i16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Saturating<i16> as Neg>::Output

Performs the unary - operation.

impl Neg for &Saturating<i32>

type Output = <Saturating<i32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Saturating<i32> as Neg>::Output

Performs the unary - operation.

impl Neg for &Saturating<i64>

type Output = <Saturating<i64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Saturating<i64> as Neg>::Output

Performs the unary - operation.

impl Neg for &Saturating<i8>

type Output = <Saturating<i8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Saturating<i8> as Neg>::Output

Performs the unary - operation.

impl Neg for &Saturating<isize>

type Output = <Saturating<isize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Saturating<isize> as Neg>::Output

Performs the unary - operation.

impl Neg for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the - operator.

fn neg(self) -> Saturating<i128>

Performs the unary - operation.

impl Neg for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the - operator.

fn neg(self) -> Saturating<i16>

Performs the unary - operation.

impl Neg for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the - operator.

fn neg(self) -> Saturating<i32>

Performs the unary - operation.

impl Neg for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the - operator.

fn neg(self) -> Saturating<i64>

Performs the unary - operation.

impl Neg for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the - operator.

fn neg(self) -> Saturating<i8>

Performs the unary - operation.

impl Neg for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the - operator.

fn neg(self) -> Saturating<isize>

Performs the unary - operation.

impl Not for &Saturating<i128>

type Output = <Saturating<i128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<i128> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<i16>

type Output = <Saturating<i16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<i16> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<i32>

type Output = <Saturating<i32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<i32> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<i64>

type Output = <Saturating<i64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<i64> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<i8>

type Output = <Saturating<i8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<i8> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<isize>

type Output = <Saturating<isize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<isize> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<u128>

type Output = <Saturating<u128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<u128> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<u16>

type Output = <Saturating<u16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<u16> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<u32>

type Output = <Saturating<u32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<u32> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<u64>

type Output = <Saturating<u64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<u64> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<u8>

type Output = <Saturating<u8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<u8> as Not>::Output

Performs the unary ! operation.

impl Not for &Saturating<usize>

type Output = <Saturating<usize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Saturating<usize> as Not>::Output

Performs the unary ! operation.

impl Not for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<i128>

Performs the unary ! operation.

impl Not for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<i16>

Performs the unary ! operation.

impl Not for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<i32>

Performs the unary ! operation.

impl Not for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<i64>

Performs the unary ! operation.

impl Not for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<i8>

Performs the unary ! operation.

impl Not for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<isize>

Performs the unary ! operation.

impl Not for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<u128>

Performs the unary ! operation.

impl Not for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<u16>

Performs the unary ! operation.

impl Not for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<u32>

Performs the unary ! operation.

impl Not for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<u64>

Performs the unary ! operation.

impl Not for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<u8>

Performs the unary ! operation.

impl Not for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the ! operator.

fn not(self) -> Saturating<usize>

Performs the unary ! operation.

impl<T> Octal for Saturating<T>

where T: Octal,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Ord for Saturating<T>

where T: Ord,

fn cmp(&self, other: &Saturating<T>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<T> PartialEq for Saturating<T>

where T: PartialEq,

fn eq(&self, other: &Saturating<T>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> PartialOrd for Saturating<T>

where T: PartialOrd,

fn partial_cmp(&self, other: &Saturating<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Rem<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i128>) -> <Saturating<i128> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i128>) -> <Saturating<i128> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i16>) -> <Saturating<i16> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i16>) -> <Saturating<i16> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i32>) -> <Saturating<i32> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i32>) -> <Saturating<i32> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i64>) -> <Saturating<i64> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i64>) -> <Saturating<i64> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i8>) -> <Saturating<i8> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<i8>) -> <Saturating<i8> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<isize>) -> <Saturating<isize> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<isize>) -> <Saturating<isize> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u128>) -> <Saturating<u128> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u128>) -> <Saturating<u128> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u16>) -> <Saturating<u16> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u16>) -> <Saturating<u16> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u32>) -> <Saturating<u32> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u32>) -> <Saturating<u32> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u64>) -> <Saturating<u64> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u64>) -> <Saturating<u64> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u8>) -> <Saturating<u8> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<u8>) -> <Saturating<u8> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<usize>) -> <Saturating<usize> as Rem>::Output

Performs the % operation.

impl Rem<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: &Saturating<usize>) -> <Saturating<usize> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i128>) -> <Saturating<i128> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i16>) -> <Saturating<i16> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i32>) -> <Saturating<i32> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i64>) -> <Saturating<i64> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i8>) -> <Saturating<i8> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<isize>) -> <Saturating<isize> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u128>) -> <Saturating<u128> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u16>) -> <Saturating<u16> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u32>) -> <Saturating<u32> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u64>) -> <Saturating<u64> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u8>) -> <Saturating<u8> as Rem>::Output

Performs the % operation.

impl<'a> Rem<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as Rem>::Output

The resulting type after applying the % operator.

fn rem(self, other: Saturating<usize>) -> <Saturating<usize> as Rem>::Output

Performs the % operation.

impl Rem for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i128>) -> Saturating<i128>

Performs the % operation.

impl Rem for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i16>) -> Saturating<i16>

Performs the % operation.

impl Rem for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i32>) -> Saturating<i32>

Performs the % operation.

impl Rem for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i64>) -> Saturating<i64>

Performs the % operation.

impl Rem for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<i8>) -> Saturating<i8>

Performs the % operation.

impl Rem for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<isize>) -> Saturating<isize>

Performs the % operation.

impl Rem for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u128>) -> Saturating<u128>

Performs the % operation.

impl Rem for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u16>) -> Saturating<u16>

Performs the % operation.

impl Rem for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u32>) -> Saturating<u32>

Performs the % operation.

impl Rem for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u64>) -> Saturating<u64>

Performs the % operation.

impl Rem for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<u8>) -> Saturating<u8>

Performs the % operation.

impl Rem for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the % operator.

fn rem(self, other: Saturating<usize>) -> Saturating<usize>

Performs the % operation.

impl RemAssign<&Saturating<i128>> for Saturating<i128>

fn rem_assign(&mut self, other: &Saturating<i128>)

Performs the %= operation.

impl RemAssign<&Saturating<i16>> for Saturating<i16>

fn rem_assign(&mut self, other: &Saturating<i16>)

Performs the %= operation.

impl RemAssign<&Saturating<i32>> for Saturating<i32>

fn rem_assign(&mut self, other: &Saturating<i32>)

Performs the %= operation.

impl RemAssign<&Saturating<i64>> for Saturating<i64>

fn rem_assign(&mut self, other: &Saturating<i64>)

Performs the %= operation.

impl RemAssign<&Saturating<i8>> for Saturating<i8>

fn rem_assign(&mut self, other: &Saturating<i8>)

Performs the %= operation.

impl RemAssign<&Saturating<isize>> for Saturating<isize>

fn rem_assign(&mut self, other: &Saturating<isize>)

Performs the %= operation.

impl RemAssign<&Saturating<u128>> for Saturating<u128>

fn rem_assign(&mut self, other: &Saturating<u128>)

Performs the %= operation.

impl RemAssign<&Saturating<u16>> for Saturating<u16>

fn rem_assign(&mut self, other: &Saturating<u16>)

Performs the %= operation.

impl RemAssign<&Saturating<u32>> for Saturating<u32>

fn rem_assign(&mut self, other: &Saturating<u32>)

Performs the %= operation.

impl RemAssign<&Saturating<u64>> for Saturating<u64>

fn rem_assign(&mut self, other: &Saturating<u64>)

Performs the %= operation.

impl RemAssign<&Saturating<u8>> for Saturating<u8>

fn rem_assign(&mut self, other: &Saturating<u8>)

Performs the %= operation.

impl RemAssign<&Saturating<usize>> for Saturating<usize>

fn rem_assign(&mut self, other: &Saturating<usize>)

Performs the %= operation.

impl RemAssign<&i128> for Saturating<i128>

fn rem_assign(&mut self, other: &i128)

Performs the %= operation.

impl RemAssign<&i16> for Saturating<i16>

fn rem_assign(&mut self, other: &i16)

Performs the %= operation.

impl RemAssign<&i32> for Saturating<i32>

fn rem_assign(&mut self, other: &i32)

Performs the %= operation.

impl RemAssign<&i64> for Saturating<i64>

fn rem_assign(&mut self, other: &i64)

Performs the %= operation.

impl RemAssign<&i8> for Saturating<i8>

fn rem_assign(&mut self, other: &i8)

Performs the %= operation.

impl RemAssign<&isize> for Saturating<isize>

fn rem_assign(&mut self, other: &isize)

Performs the %= operation.

impl RemAssign<&u128> for Saturating<u128>

fn rem_assign(&mut self, other: &u128)

Performs the %= operation.

impl RemAssign<&u16> for Saturating<u16>

fn rem_assign(&mut self, other: &u16)

Performs the %= operation.

impl RemAssign<&u32> for Saturating<u32>

fn rem_assign(&mut self, other: &u32)

Performs the %= operation.

impl RemAssign<&u64> for Saturating<u64>

fn rem_assign(&mut self, other: &u64)

Performs the %= operation.

impl RemAssign<&u8> for Saturating<u8>

fn rem_assign(&mut self, other: &u8)

Performs the %= operation.

impl RemAssign<&usize> for Saturating<usize>

fn rem_assign(&mut self, other: &usize)

Performs the %= operation.

impl RemAssign<i128> for Saturating<i128>

fn rem_assign(&mut self, other: i128)

Performs the %= operation.

impl RemAssign<i16> for Saturating<i16>

fn rem_assign(&mut self, other: i16)

Performs the %= operation.

impl RemAssign<i32> for Saturating<i32>

fn rem_assign(&mut self, other: i32)

Performs the %= operation.

impl RemAssign<i64> for Saturating<i64>

fn rem_assign(&mut self, other: i64)

Performs the %= operation.

impl RemAssign<i8> for Saturating<i8>

fn rem_assign(&mut self, other: i8)

Performs the %= operation.

impl RemAssign<isize> for Saturating<isize>

fn rem_assign(&mut self, other: isize)

Performs the %= operation.

impl RemAssign<u128> for Saturating<u128>

fn rem_assign(&mut self, other: u128)

Performs the %= operation.

impl RemAssign<u16> for Saturating<u16>

fn rem_assign(&mut self, other: u16)

Performs the %= operation.

impl RemAssign<u32> for Saturating<u32>

fn rem_assign(&mut self, other: u32)

Performs the %= operation.

impl RemAssign<u64> for Saturating<u64>

fn rem_assign(&mut self, other: u64)

Performs the %= operation.

impl RemAssign<u8> for Saturating<u8>

fn rem_assign(&mut self, other: u8)

Performs the %= operation.

impl RemAssign<usize> for Saturating<usize>

fn rem_assign(&mut self, other: usize)

Performs the %= operation.

impl RemAssign for Saturating<i128>

fn rem_assign(&mut self, other: Saturating<i128>)

Performs the %= operation.

impl RemAssign for Saturating<i16>

fn rem_assign(&mut self, other: Saturating<i16>)

Performs the %= operation.

impl RemAssign for Saturating<i32>

fn rem_assign(&mut self, other: Saturating<i32>)

Performs the %= operation.

impl RemAssign for Saturating<i64>

fn rem_assign(&mut self, other: Saturating<i64>)

Performs the %= operation.

impl RemAssign for Saturating<i8>

fn rem_assign(&mut self, other: Saturating<i8>)

Performs the %= operation.

impl RemAssign for Saturating<isize>

fn rem_assign(&mut self, other: Saturating<isize>)

Performs the %= operation.

impl RemAssign for Saturating<u128>

fn rem_assign(&mut self, other: Saturating<u128>)

Performs the %= operation.

impl RemAssign for Saturating<u16>

fn rem_assign(&mut self, other: Saturating<u16>)

Performs the %= operation.

impl RemAssign for Saturating<u32>

fn rem_assign(&mut self, other: Saturating<u32>)

Performs the %= operation.

impl RemAssign for Saturating<u64>

fn rem_assign(&mut self, other: Saturating<u64>)

Performs the %= operation.

impl RemAssign for Saturating<u8>

fn rem_assign(&mut self, other: Saturating<u8>)

Performs the %= operation.

impl RemAssign for Saturating<usize>

fn rem_assign(&mut self, other: Saturating<usize>)

Performs the %= operation.

impl Sub<&Saturating<i128>> for &Saturating<i128>

type Output = <Saturating<i128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i128>) -> <Saturating<i128> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i128>> for Saturating<i128>

type Output = <Saturating<i128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i128>) -> <Saturating<i128> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i16>> for &Saturating<i16>

type Output = <Saturating<i16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i16>) -> <Saturating<i16> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i16>> for Saturating<i16>

type Output = <Saturating<i16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i16>) -> <Saturating<i16> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i32>> for &Saturating<i32>

type Output = <Saturating<i32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i32>) -> <Saturating<i32> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i32>> for Saturating<i32>

type Output = <Saturating<i32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i32>) -> <Saturating<i32> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i64>> for &Saturating<i64>

type Output = <Saturating<i64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i64>) -> <Saturating<i64> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i64>> for Saturating<i64>

type Output = <Saturating<i64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i64>) -> <Saturating<i64> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i8>> for &Saturating<i8>

type Output = <Saturating<i8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i8>) -> <Saturating<i8> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<i8>> for Saturating<i8>

type Output = <Saturating<i8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<i8>) -> <Saturating<i8> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<isize>> for &Saturating<isize>

type Output = <Saturating<isize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<isize>) -> <Saturating<isize> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<isize>> for Saturating<isize>

type Output = <Saturating<isize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<isize>) -> <Saturating<isize> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u128>> for &Saturating<u128>

type Output = <Saturating<u128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u128>) -> <Saturating<u128> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u128>> for Saturating<u128>

type Output = <Saturating<u128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u128>) -> <Saturating<u128> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u16>> for &Saturating<u16>

type Output = <Saturating<u16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u16>) -> <Saturating<u16> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u16>> for Saturating<u16>

type Output = <Saturating<u16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u16>) -> <Saturating<u16> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u32>> for &Saturating<u32>

type Output = <Saturating<u32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u32>) -> <Saturating<u32> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u32>> for Saturating<u32>

type Output = <Saturating<u32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u32>) -> <Saturating<u32> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u64>> for &Saturating<u64>

type Output = <Saturating<u64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u64>) -> <Saturating<u64> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u64>> for Saturating<u64>

type Output = <Saturating<u64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u64>) -> <Saturating<u64> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u8>> for &Saturating<u8>

type Output = <Saturating<u8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u8>) -> <Saturating<u8> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<u8>> for Saturating<u8>

type Output = <Saturating<u8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<u8>) -> <Saturating<u8> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<usize>> for &Saturating<usize>

type Output = <Saturating<usize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<usize>) -> <Saturating<usize> as Sub>::Output

Performs the - operation.

impl Sub<&Saturating<usize>> for Saturating<usize>

type Output = <Saturating<usize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: &Saturating<usize>) -> <Saturating<usize> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<i128>> for &'a Saturating<i128>

type Output = <Saturating<i128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i128>) -> <Saturating<i128> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<i16>> for &'a Saturating<i16>

type Output = <Saturating<i16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i16>) -> <Saturating<i16> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<i32>> for &'a Saturating<i32>

type Output = <Saturating<i32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i32>) -> <Saturating<i32> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<i64>> for &'a Saturating<i64>

type Output = <Saturating<i64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i64>) -> <Saturating<i64> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<i8>> for &'a Saturating<i8>

type Output = <Saturating<i8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i8>) -> <Saturating<i8> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<isize>> for &'a Saturating<isize>

type Output = <Saturating<isize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<isize>) -> <Saturating<isize> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<u128>> for &'a Saturating<u128>

type Output = <Saturating<u128> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u128>) -> <Saturating<u128> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<u16>> for &'a Saturating<u16>

type Output = <Saturating<u16> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u16>) -> <Saturating<u16> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<u32>> for &'a Saturating<u32>

type Output = <Saturating<u32> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u32>) -> <Saturating<u32> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<u64>> for &'a Saturating<u64>

type Output = <Saturating<u64> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u64>) -> <Saturating<u64> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<u8>> for &'a Saturating<u8>

type Output = <Saturating<u8> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u8>) -> <Saturating<u8> as Sub>::Output

Performs the - operation.

impl<'a> Sub<Saturating<usize>> for &'a Saturating<usize>

type Output = <Saturating<usize> as Sub>::Output

The resulting type after applying the - operator.

fn sub(self, other: Saturating<usize>) -> <Saturating<usize> as Sub>::Output

Performs the - operation.

impl Sub for Saturating<i128>

type Output = Saturating<i128>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i128>) -> Saturating<i128>

Performs the - operation.

impl Sub for Saturating<i16>

type Output = Saturating<i16>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i16>) -> Saturating<i16>

Performs the - operation.

impl Sub for Saturating<i32>

type Output = Saturating<i32>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i32>) -> Saturating<i32>

Performs the - operation.

impl Sub for Saturating<i64>

type Output = Saturating<i64>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i64>) -> Saturating<i64>

Performs the - operation.

impl Sub for Saturating<i8>

type Output = Saturating<i8>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<i8>) -> Saturating<i8>

Performs the - operation.

impl Sub for Saturating<isize>

type Output = Saturating<isize>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<isize>) -> Saturating<isize>

Performs the - operation.

impl Sub for Saturating<u128>

type Output = Saturating<u128>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u128>) -> Saturating<u128>

Performs the - operation.

impl Sub for Saturating<u16>

type Output = Saturating<u16>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u16>) -> Saturating<u16>

Performs the - operation.

impl Sub for Saturating<u32>

type Output = Saturating<u32>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u32>) -> Saturating<u32>

Performs the - operation.

impl Sub for Saturating<u64>

type Output = Saturating<u64>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u64>) -> Saturating<u64>

Performs the - operation.

impl Sub for Saturating<u8>

type Output = Saturating<u8>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<u8>) -> Saturating<u8>

Performs the - operation.

impl Sub for Saturating<usize>

type Output = Saturating<usize>

The resulting type after applying the - operator.

fn sub(self, other: Saturating<usize>) -> Saturating<usize>

Performs the - operation.

impl SubAssign<&Saturating<i128>> for Saturating<i128>

fn sub_assign(&mut self, other: &Saturating<i128>)

Performs the -= operation.

impl SubAssign<&Saturating<i16>> for Saturating<i16>

fn sub_assign(&mut self, other: &Saturating<i16>)

Performs the -= operation.

impl SubAssign<&Saturating<i32>> for Saturating<i32>

fn sub_assign(&mut self, other: &Saturating<i32>)

Performs the -= operation.

impl SubAssign<&Saturating<i64>> for Saturating<i64>

fn sub_assign(&mut self, other: &Saturating<i64>)

Performs the -= operation.

impl SubAssign<&Saturating<i8>> for Saturating<i8>

fn sub_assign(&mut self, other: &Saturating<i8>)

Performs the -= operation.

impl SubAssign<&Saturating<isize>> for Saturating<isize>

fn sub_assign(&mut self, other: &Saturating<isize>)

Performs the -= operation.

impl SubAssign<&Saturating<u128>> for Saturating<u128>

fn sub_assign(&mut self, other: &Saturating<u128>)

Performs the -= operation.

impl SubAssign<&Saturating<u16>> for Saturating<u16>

fn sub_assign(&mut self, other: &Saturating<u16>)

Performs the -= operation.

impl SubAssign<&Saturating<u32>> for Saturating<u32>

fn sub_assign(&mut self, other: &Saturating<u32>)

Performs the -= operation.

impl SubAssign<&Saturating<u64>> for Saturating<u64>

fn sub_assign(&mut self, other: &Saturating<u64>)

Performs the -= operation.

impl SubAssign<&Saturating<u8>> for Saturating<u8>

fn sub_assign(&mut self, other: &Saturating<u8>)

Performs the -= operation.

impl SubAssign<&Saturating<usize>> for Saturating<usize>

fn sub_assign(&mut self, other: &Saturating<usize>)

Performs the -= operation.

impl SubAssign<&i128> for Saturating<i128>

fn sub_assign(&mut self, other: &i128)

Performs the -= operation.

impl SubAssign<&i16> for Saturating<i16>

fn sub_assign(&mut self, other: &i16)

Performs the -= operation.

impl SubAssign<&i32> for Saturating<i32>

fn sub_assign(&mut self, other: &i32)

Performs the -= operation.

impl SubAssign<&i64> for Saturating<i64>

fn sub_assign(&mut self, other: &i64)

Performs the -= operation.

impl SubAssign<&i8> for Saturating<i8>

fn sub_assign(&mut self, other: &i8)

Performs the -= operation.

impl SubAssign<&isize> for Saturating<isize>

fn sub_assign(&mut self, other: &isize)

Performs the -= operation.

impl SubAssign<&u128> for Saturating<u128>

fn sub_assign(&mut self, other: &u128)

Performs the -= operation.

impl SubAssign<&u16> for Saturating<u16>

fn sub_assign(&mut self, other: &u16)

Performs the -= operation.

impl SubAssign<&u32> for Saturating<u32>

fn sub_assign(&mut self, other: &u32)

Performs the -= operation.

impl SubAssign<&u64> for Saturating<u64>

fn sub_assign(&mut self, other: &u64)

Performs the -= operation.

impl SubAssign<&u8> for Saturating<u8>

fn sub_assign(&mut self, other: &u8)

Performs the -= operation.

impl SubAssign<&usize> for Saturating<usize>

fn sub_assign(&mut self, other: &usize)

Performs the -= operation.

impl SubAssign<i128> for Saturating<i128>

fn sub_assign(&mut self, other: i128)

Performs the -= operation.

impl SubAssign<i16> for Saturating<i16>

fn sub_assign(&mut self, other: i16)

Performs the -= operation.

impl SubAssign<i32> for Saturating<i32>

fn sub_assign(&mut self, other: i32)

Performs the -= operation.

impl SubAssign<i64> for Saturating<i64>

fn sub_assign(&mut self, other: i64)

Performs the -= operation.

impl SubAssign<i8> for Saturating<i8>

fn sub_assign(&mut self, other: i8)

Performs the -= operation.

impl SubAssign<isize> for Saturating<isize>

fn sub_assign(&mut self, other: isize)

Performs the -= operation.

impl SubAssign<u128> for Saturating<u128>

fn sub_assign(&mut self, other: u128)

Performs the -= operation.

impl SubAssign<u16> for Saturating<u16>

fn sub_assign(&mut self, other: u16)

Performs the -= operation.

impl SubAssign<u32> for Saturating<u32>

fn sub_assign(&mut self, other: u32)

Performs the -= operation.

impl SubAssign<u64> for Saturating<u64>

fn sub_assign(&mut self, other: u64)

Performs the -= operation.

impl SubAssign<u8> for Saturating<u8>

fn sub_assign(&mut self, other: u8)

Performs the -= operation.

impl SubAssign<usize> for Saturating<usize>

fn sub_assign(&mut self, other: usize)

Performs the -= operation.

impl SubAssign for Saturating<i128>

fn sub_assign(&mut self, other: Saturating<i128>)

Performs the -= operation.

impl SubAssign for Saturating<i16>

fn sub_assign(&mut self, other: Saturating<i16>)

Performs the -= operation.

impl SubAssign for Saturating<i32>

fn sub_assign(&mut self, other: Saturating<i32>)

Performs the -= operation.

impl SubAssign for Saturating<i64>

fn sub_assign(&mut self, other: Saturating<i64>)

Performs the -= operation.

impl SubAssign for Saturating<i8>

fn sub_assign(&mut self, other: Saturating<i8>)

Performs the -= operation.

impl SubAssign for Saturating<isize>

fn sub_assign(&mut self, other: Saturating<isize>)

Performs the -= operation.

impl SubAssign for Saturating<u128>

fn sub_assign(&mut self, other: Saturating<u128>)

Performs the -= operation.

impl SubAssign for Saturating<u16>

fn sub_assign(&mut self, other: Saturating<u16>)

Performs the -= operation.

impl SubAssign for Saturating<u32>

fn sub_assign(&mut self, other: Saturating<u32>)

Performs the -= operation.

impl SubAssign for Saturating<u64>

fn sub_assign(&mut self, other: Saturating<u64>)

Performs the -= operation.

impl SubAssign for Saturating<u8>

fn sub_assign(&mut self, other: Saturating<u8>)

Performs the -= operation.

impl SubAssign for Saturating<usize>

fn sub_assign(&mut self, other: Saturating<usize>)

Performs the -= operation.

impl<T> UpperHex for Saturating<T>

where T: UpperHex,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Copy for Saturating<T>

where T: Copy,

impl<T> Eq for Saturating<T>

where T: Eq,

impl<T> StructuralPartialEq for Saturating<T>