Struct rustc_middle::thir::Ascription

source ·
pub struct Ascription<'tcx> {
    pub annotation: CanonicalUserTypeAnnotation<'tcx>,
    pub variance: Variance,
}

Fields§

§annotation: CanonicalUserTypeAnnotation<'tcx>§variance: Variance

Variance to use when relating the user_ty to the type of the value being matched. Typically, this is Variance::Covariant, since the value being matched must have a type that is some subtype of the ascribed type.

Note that this variance does not apply for any bindings within subpatterns. The type assigned to those bindings must be exactly equal to the user_ty given here.

The only place where this field is not Covariant is when matching constants, where we currently use Contravariant – this is because the constant type just needs to be “comparable” to the type of the input value. So, for example:

match x { "foo" => .. }

requires that &'static str <: T_x, where T_x is the type of x. Really, we should probably be checking for a PartialEq impl instead, but this preserves the behavior of the old type-check for now. See #57280 for details.

Trait Implementations§

source§

impl<'tcx> Clone for Ascription<'tcx>

source§

fn clone(&self) -> Ascription<'tcx>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<'tcx> Debug for Ascription<'tcx>

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<'tcx, '__ctx> HashStable<StableHashingContext<'__ctx>> for Ascription<'tcx>

source§

fn hash_stable( &self, __hcx: &mut StableHashingContext<'__ctx>, __hasher: &mut StableHasher, )

source§

impl<'tcx> TypeVisitable<TyCtxt<'tcx>> for Ascription<'tcx>

source§

fn visit_with<__V: TypeVisitor<TyCtxt<'tcx>>>( &self, __visitor: &mut __V, ) -> __V::Result

The entry point for visiting. To visit a value t with a visitor v call: t.visit_with(v). Read more

Auto Trait Implementations§

§

impl<'tcx> Freeze for Ascription<'tcx>

§

impl<'tcx> !RefUnwindSafe for Ascription<'tcx>

§

impl<'tcx> !Send for Ascription<'tcx>

§

impl<'tcx> !Sync for Ascription<'tcx>

§

impl<'tcx> Unpin for Ascription<'tcx>

§

impl<'tcx> !UnwindSafe for Ascription<'tcx>

Blanket Implementations§

source§

impl<T> Aligned for T

source§

const ALIGN: Alignment = _

Alignment of Self.
source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T, R> CollectAndApply<T, R> for T

source§

fn collect_and_apply<I, F>(iter: I, f: F) -> R
where I: Iterator<Item = T>, F: FnOnce(&[T]) -> R,

Equivalent to f(&iter.collect::<Vec<_>>()).

§

type Output = R

source§

impl<Tcx, T> DepNodeParams<Tcx> for T
where Tcx: DepContext, T: for<'a> HashStable<StableHashingContext<'a>> + Debug,

source§

default fn fingerprint_style() -> FingerprintStyle

source§

default fn to_fingerprint(&self, tcx: Tcx) -> Fingerprint

This method turns the parameters of a DepNodeConstructor into an opaque Fingerprint to be used in DepNode. Not all DepNodeParams support being turned into a Fingerprint (they don’t need to if the corresponding DepNode is anonymous).
source§

default fn to_debug_str(&self, _: Tcx) -> String

source§

default fn recover(_: Tcx, _: &DepNode) -> Option<T>

This method tries to recover the query key from the given DepNode, something which is needed when forcing DepNodes during red-green evaluation. The query system will only call this method if fingerprint_style() is not FingerprintStyle::Opaque. It is always valid to return None here, in which case incremental compilation will treat the query as having changed instead of forcing it.
source§

impl<T> Filterable for T

source§

fn filterable( self, filter_name: &'static str, ) -> RequestFilterDataProvider<T, fn(_: DataRequest<'_>) -> bool>

Creates a filterable data provider with the given name for debugging. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<P> IntoQueryParam<P> for P

source§

impl<T> MaybeResult<T> for T

§

type Error = !

source§

fn from(_: Result<T, <T as MaybeResult<T>>::Error>) -> T

source§

fn to_result(self) -> Result<T, <T as MaybeResult<T>>::Error>

source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<I, T> TypeVisitableExt<I> for T
where I: Interner, T: TypeVisitable<I>,

source§

fn has_type_flags(&self, flags: TypeFlags) -> bool

source§

fn has_vars_bound_at_or_above(&self, binder: DebruijnIndex) -> bool

Returns true if self has any late-bound regions that are either bound by binder or bound by some binder outside of binder. If binder is ty::INNERMOST, this indicates whether there are any late-bound regions that appear free.
source§

fn error_reported(&self) -> Result<(), <I as Interner>::ErrorGuaranteed>

source§

fn has_vars_bound_above(&self, binder: DebruijnIndex) -> bool

Returns true if this type has any regions that escape binder (and hence are not bound by it).
source§

fn has_escaping_bound_vars(&self) -> bool

Return true if this type has regions that are not a part of the type. For example, for<'a> fn(&'a i32) return false, while fn(&'a i32) would return true. The latter can occur when traversing through the former. Read more
source§

fn has_aliases(&self) -> bool

source§

fn has_inherent_projections(&self) -> bool

source§

fn has_opaque_types(&self) -> bool

source§

fn has_coroutines(&self) -> bool

source§

fn references_error(&self) -> bool

source§

fn has_non_region_param(&self) -> bool

source§

fn has_infer_regions(&self) -> bool

source§

fn has_infer_types(&self) -> bool

source§

fn has_non_region_infer(&self) -> bool

source§

fn has_infer(&self) -> bool

source§

fn has_placeholders(&self) -> bool

source§

fn has_non_region_placeholders(&self) -> bool

source§

fn has_param(&self) -> bool

source§

fn has_free_regions(&self) -> bool

“Free” regions in this context means that it has any region that is not (a) erased or (b) late-bound.
source§

fn has_erased_regions(&self) -> bool

source§

fn has_erasable_regions(&self) -> bool

True if there are any un-erased free regions.
source§

fn is_global(&self) -> bool

Indicates whether this value references only ‘global’ generic parameters that are the same regardless of what fn we are in. This is used for caching.
source§

fn has_bound_regions(&self) -> bool

True if there are any late-bound regions
source§

fn has_non_region_bound_vars(&self) -> bool

True if there are any late-bound non-region variables
source§

fn has_bound_vars(&self) -> bool

True if there are any bound variables
source§

fn still_further_specializable(&self) -> bool

Indicates whether this value still has parameters/placeholders/inference variables which could be replaced later, in a way that would change the results of impl specialization.
source§

impl<I, T, U> Upcast<I, U> for T
where U: UpcastFrom<I, T>,

source§

fn upcast(self, interner: I) -> U

source§

impl<I, T> UpcastFrom<I, T> for T

source§

fn upcast_from(from: T, _tcx: I) -> T

source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<Tcx, T> Value<Tcx> for T
where Tcx: DepContext,

source§

default fn from_cycle_error( tcx: Tcx, cycle_error: &CycleError, _guar: ErrorGuaranteed, ) -> T

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<'a, T> Captures<'a> for T
where T: ?Sized,

source§

impl<T> ErasedDestructor for T
where T: 'static,

source§

impl<T> MaybeSendSync for T

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 32 bytes