1.0.0[][src]Struct std::net::SocketAddrV6

pub struct SocketAddrV6 { /* fields omitted */ }

An IPv6 socket address.

IPv6 socket addresses consist of an Ipv6 address, a 16-bit port number, as well as fields containing the traffic class, the flow label, and a scope identifier (see IETF RFC 2553, Section 3.3 for more details).

See SocketAddr for a type encompassing both IPv4 and IPv6 socket addresses.

The size of a SocketAddrV6 struct may vary depending on the target operating system.

Examples

use std::net::{Ipv6Addr, SocketAddrV6};

let socket = SocketAddrV6::new(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 1), 8080, 0, 0);

assert_eq!("[2001:db8::1]:8080".parse(), Ok(socket));
assert_eq!(socket.ip(), &Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 1));
assert_eq!(socket.port(), 8080);Run

Methods

impl SocketAddrV6
[src]

Creates a new socket address from an IPv6 address, a 16-bit port number, and the flowinfo and scope_id fields.

For more information on the meaning and layout of the flowinfo and scope_id parameters, see IETF RFC 2553, Section 3.3.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0);Run

Returns the IP address associated with this socket address.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0);
assert_eq!(socket.ip(), &Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));Run

Changes the IP address associated with this socket address.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0);
socket.set_ip(Ipv6Addr::new(76, 45, 0, 0, 0, 0, 0, 0));
assert_eq!(socket.ip(), &Ipv6Addr::new(76, 45, 0, 0, 0, 0, 0, 0));Run

Returns the port number associated with this socket address.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0);
assert_eq!(socket.port(), 8080);Run

Changes the port number associated with this socket address.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0);
socket.set_port(4242);
assert_eq!(socket.port(), 4242);Run

Returns the flow information associated with this address.

This information corresponds to the sin6_flowinfo field in C's netinet/in.h, as specified in IETF RFC 2553, Section 3.3. It combines information about the flow label and the traffic class as specified in IETF RFC 2460, respectively Section 6 and Section 7.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 10, 0);
assert_eq!(socket.flowinfo(), 10);Run

Changes the flow information associated with this socket address.

See the flowinfo method's documentation for more details.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 10, 0);
socket.set_flowinfo(56);
assert_eq!(socket.flowinfo(), 56);Run

Returns the scope ID associated with this address.

This information corresponds to the sin6_scope_id field in C's netinet/in.h, as specified in IETF RFC 2553, Section 3.3.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 78);
assert_eq!(socket.scope_id(), 78);Run

Change the scope ID associated with this socket address.

See the scope_id method's documentation for more details.

Examples

use std::net::{SocketAddrV6, Ipv6Addr};

let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 78);
socket.set_scope_id(42);
assert_eq!(socket.scope_id(), 42);Run

Trait Implementations

impl ToSocketAddrs for SocketAddrV6
[src]

Returned iterator over socket addresses which this type may correspond to. Read more

Converts this object to an iterator of resolved SocketAddrs. Read more

impl Display for SocketAddrV6
[src]

Formats the value using the given formatter. Read more

impl Debug for SocketAddrV6
[src]

Formats the value using the given formatter. Read more

impl PartialEq<SocketAddrV6> for SocketAddrV6
[src]

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

impl Eq for SocketAddrV6
[src]

impl FromStr for SocketAddrV6
1.5.0
[src]

The associated error which can be returned from parsing.

Parses a string s to return a value of this type. Read more

impl Hash for SocketAddrV6
[src]

Feeds this value into the given [Hasher]. Read more

Feeds a slice of this type into the given [Hasher]. Read more

impl Copy for SocketAddrV6
[src]

impl From<SocketAddrV6> for SocketAddr
1.16.0
[src]

impl Clone for SocketAddrV6
[src]

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Auto Trait Implementations

impl Send for SocketAddrV6

impl Sync for SocketAddrV6

Blanket Implementations

impl<T, U> TryFrom for T where
    T: From<U>, 
[src]

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl<T> From for T
[src]

Performs the conversion.

impl<T, U> TryInto for T where
    U: TryFrom<T>, 
[src]

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl<T, U> Into for T where
    U: From<T>, 
[src]

Performs the conversion.

impl<T> Borrow for T where
    T: ?Sized
[src]

Important traits for &'_ mut I

Immutably borrows from an owned value. Read more

impl<T> BorrowMut for T where
    T: ?Sized
[src]

Important traits for &'_ mut I

Mutably borrows from an owned value. Read more

impl<T> Any for T where
    T: 'static + ?Sized
[src]

🔬 This is a nightly-only experimental API. (get_type_id #27745)

this method will likely be replaced by an associated static

Gets the TypeId of self. Read more

impl<T> ToOwned for T where
    T: Clone
[src]

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into #41263)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> ToString for T where
    T: Display + ?Sized
[src]

Converts the given value to a String. Read more