Introduction

This book is the primary reference for the Rust programming language. It provides three kinds of material:

  • Chapters that informally describe each language construct and their use.
  • Chapters that informally describe the memory model, concurrency model, runtime services, linkage model, and debugging facilities.
  • Appendix chapters providing rationale and references to languages that influenced the design.

Warning: This book is incomplete. Documenting everything takes a while. See the GitHub issues for what is not documented in this book.

Rust releases

Rust has a new language release every six weeks. The first stable release of the language was Rust 1.0.0, followed by Rust 1.1.0 and so on. Tools (rustc, cargo, etc.) and documentation (Standard library, this book, etc.) are released with the language release.

The latest release of this book, matching the latest Rust version, can always be found at https://doc.rust-lang.org/reference/. Prior versions can be found by adding the Rust version before the “reference” directory. For example, the Reference for Rust 1.49.0 is located at https://doc.rust-lang.org/1.49.0/reference/.

What The Reference is not

This book does not serve as an introduction to the language. Background familiarity with the language is assumed. A separate book is available to help acquire such background familiarity.

This book also does not serve as a reference to the standard library included in the language distribution. Those libraries are documented separately by extracting documentation attributes from their source code. Many of the features that one might expect to be language features are library features in Rust, so what you’re looking for may be there, not here.

Similarly, this book does not usually document the specifics of rustc as a tool or of Cargo. rustc has its own book. Cargo has a book that contains a reference. There are a few pages such as linkage that still describe how rustc works.

This book also only serves as a reference to what is available in stable Rust. For unstable features being worked on, see the Unstable Book.

Rust compilers, including rustc, will perform optimizations. The reference does not specify what optimizations are allowed or disallowed. Instead, think of the compiled program as a black box. You can only probe by running it, feeding it input and observing its output. Everything that happens that way must conform to what the reference says.

Finally, this book is not normative. It may include details that are specific to rustc itself, and should not be taken as a specification for the Rust language. We intend to produce such a book someday, and until then, the reference is the closest thing we have to one.

How to use this book

This book does not assume you are reading this book sequentially. Each chapter generally can be read standalone, but will cross-link to other chapters for facets of the language they refer to, but do not discuss.

There are two main ways to read this document.

The first is to answer a specific question. If you know which chapter answers that question, you can jump to that chapter in the table of contents. Otherwise, you can press s or click the magnifying glass on the top bar to search for keywords related to your question. For example, say you wanted to know when a temporary value created in a let statement is dropped. If you didn’t already know that the lifetime of temporaries is defined in the expressions chapter, you could search “temporary let” and the first search result will take you to that section.

The second is to generally improve your knowledge of a facet of the language. In that case, just browse the table of contents until you see something you want to know more about, and just start reading. If a link looks interesting, click it, and read about that section.

That said, there is no wrong way to read this book. Read it however you feel helps you best.

Conventions

Like all technical books, this book has certain conventions in how it displays information. These conventions are documented here.

  • Statements that define a term contain that term in italics. Whenever that term is used outside of that chapter, it is usually a link to the section that has this definition.

    An example term is an example of a term being defined.

  • Differences in the language by which edition the crate is compiled under are in a blockquote that start with the words “Edition differences:” in bold.

    Edition differences: In the 2015 edition, this syntax is valid that is disallowed as of the 2018 edition.

  • Notes that contain useful information about the state of the book or point out useful, but mostly out of scope, information are in blockquotes that start with the word “Note:” in bold.

    Note: This is an example note.

  • Warnings that show unsound behavior in the language or possibly confusing interactions of language features are in a special warning box.

    Warning: This is an example warning.

  • Code snippets inline in the text are inside <code> tags.

    Longer code examples are in a syntax highlighted box that has controls for copying, executing, and showing hidden lines in the top right corner.

    // This is a hidden line.
    fn main() {
        println!("This is a code example");
    }

    All examples are written for the latest edition unless otherwise stated.

  • The grammar and lexical structure is in blockquotes with either “Lexer” or “Syntax” in bold superscript as the first line.

    Syntax
    ExampleGrammar:
          ~ Expression
       | box Expression

    See Notation for more detail.

Contributing

We welcome contributions of all kinds.

You can contribute to this book by opening an issue or sending a pull request to the Rust Reference repository. If this book does not answer your question, and you think its answer is in scope of it, please do not hesitate to file an issue or ask about it in the t-lang/doc stream on Zulip. Knowing what people use this book for the most helps direct our attention to making those sections the best that they can be. We also want the reference to be as normative as possible, so if you see anything that is wrong or is non-normative but not specifically called out, please also file an issue.

Notation

Grammar

The following notations are used by the Lexer and Syntax grammar snippets:

NotationExamplesMeaning
CAPITALKW_IF, INTEGER_LITERALA token produced by the lexer
ItalicCamelCaseLetStatement, ItemA syntactical production
stringx, while, *The exact character(s)
\x\n, \r, \t, \0The character represented by this escape
x?pub?An optional item
x*OuterAttribute*0 or more of x
x+MacroMatch+1 or more of x
xa..bHEX_DIGIT1..6a to b repetitions of x
|u8 | u16, Block | ItemEither one or another
[ ][b B]Any of the characters listed
[ - ][a-z]Any of the characters in the range
~[ ]~[b B]Any characters, except those listed
~string~\n, ~*/Any characters, except this sequence
( )(, Parameter)?Groups items

String table productions

Some rules in the grammar — notably unary operators, binary operators, and keywords — are given in a simplified form: as a listing of printable strings. These cases form a subset of the rules regarding the token rule, and are assumed to be the result of a lexical-analysis phase feeding the parser, driven by a DFA, operating over the disjunction of all such string table entries.

When such a string in monospace font occurs inside the grammar, it is an implicit reference to a single member of such a string table production. See tokens for more information.

Lexical structure

Input format

This chapter describes how a source file is interpreted as a sequence of tokens.

See Crates and source files for a description of how programs are organised into files.

Source encoding

Each source file is interpreted as a sequence of Unicode characters encoded in UTF-8. It is an error if the file is not valid UTF-8.

Byte order mark removal

If the first character in the sequence is U+FEFF (BYTE ORDER MARK), it is removed.

CRLF normalization

Each pair of characters U+000D (CR) immediately followed by U+000A (LF) is replaced by a single U+000A (LF).

Other occurrences of the character U+000D (CR) are left in place (they are treated as whitespace).

Shebang removal

If the remaining sequence begins with the characters #!, the characters up to and including the first U+000A (LF) are removed from the sequence.

For example, the first line of the following file would be ignored:

#!/usr/bin/env rustx

fn main() {
    println!("Hello!");
}

As an exception, if the #! characters are followed (ignoring intervening comments or whitespace) by a [ token, nothing is removed. This prevents an inner attribute at the start of a source file being removed.

Note: The standard library include! macro applies byte order mark removal, CRLF normalization, and shebang removal to the file it reads. The include_str! and include_bytes! macros do not.

Tokenization

The resulting sequence of characters is then converted into tokens as described in the remainder of this chapter.

Keywords

Rust divides keywords into three categories:

Strict keywords

These keywords can only be used in their correct contexts. They cannot be used as the names of:

Lexer:
KW_AS : as
KW_BREAK : break
KW_CONST : const
KW_CONTINUE : continue
KW_CRATE : crate
KW_ELSE : else
KW_ENUM : enum
KW_EXTERN : extern
KW_FALSE : false
KW_FN : fn
KW_FOR : for
KW_IF : if
KW_IMPL : impl
KW_IN : in
KW_LET : let
KW_LOOP : loop
KW_MATCH : match
KW_MOD : mod
KW_MOVE : move
KW_MUT : mut
KW_PUB : pub
KW_REF : ref
KW_RETURN : return
KW_SELFVALUE : self
KW_SELFTYPE : Self
KW_STATIC : static
KW_STRUCT : struct
KW_SUPER : super
KW_TRAIT : trait
KW_TRUE : true
KW_TYPE : type
KW_UNSAFE : unsafe
KW_USE : use
KW_WHERE : where
KW_WHILE : while

The following keywords were added beginning in the 2018 edition.

Lexer 2018+
KW_ASYNC : async
KW_AWAIT : await
KW_DYN : dyn

Reserved keywords

These keywords aren’t used yet, but they are reserved for future use. They have the same restrictions as strict keywords. The reasoning behind this is to make current programs forward compatible with future versions of Rust by forbidding them to use these keywords.

Lexer
KW_ABSTRACT : abstract
KW_BECOME : become
KW_BOX : box
KW_DO : do
KW_FINAL : final
KW_MACRO : macro
KW_OVERRIDE : override
KW_PRIV : priv
KW_TYPEOF : typeof
KW_UNSIZED : unsized
KW_VIRTUAL : virtual
KW_YIELD : yield

The following keywords are reserved beginning in the 2018 edition.

Lexer 2018+
KW_TRY : try

Weak keywords

These keywords have special meaning only in certain contexts. For example, it is possible to declare a variable or method with the name union.

  • macro_rules is used to create custom macros.

  • union is used to declare a union and is only a keyword when used in a union declaration.

  • 'static is used for the static lifetime and cannot be used as a generic lifetime parameter or loop label

    // error[E0262]: invalid lifetime parameter name: `'static`
    fn invalid_lifetime_parameter<'static>(s: &'static str) -> &'static str { s }
    
  • In the 2015 edition, dyn is a keyword when used in a type position followed by a path that does not start with :: or <, a lifetime, a question mark, a for keyword or an opening parenthesis.

    Beginning in the 2018 edition, dyn has been promoted to a strict keyword.

Lexer
KW_MACRO_RULES : macro_rules
KW_UNION : union
KW_STATICLIFETIME : 'static

Lexer 2015
KW_DYN : dyn

  • safe is used for functions and statics, which has meaning in external blocks.

Identifiers

Lexer:
IDENTIFIER_OR_KEYWORD :
      XID_Start XID_Continue*
   | _ XID_Continue+

RAW_IDENTIFIER : r# IDENTIFIER_OR_KEYWORD Except crate, self, super, Self

NON_KEYWORD_IDENTIFIER : IDENTIFIER_OR_KEYWORD Except a strict or reserved keyword

IDENTIFIER :
NON_KEYWORD_IDENTIFIER | RAW_IDENTIFIER

Identifiers follow the specification in Unicode Standard Annex #31 for Unicode version 15.0, with the additions described below. Some examples of identifiers:

  • foo
  • _identifier
  • r#true
  • Москва
  • 東京

The profile used from UAX #31 is:

with the additional constraint that a single underscore character is not an identifier.

Note: Identifiers starting with an underscore are typically used to indicate an identifier that is intentionally unused, and will silence the unused warning in rustc.

Identifiers may not be a strict or reserved keyword without the r# prefix described below in raw identifiers.

Zero width non-joiner (ZWNJ U+200C) and zero width joiner (ZWJ U+200D) characters are not allowed in identifiers.

Identifiers are restricted to the ASCII subset of XID_Start and XID_Continue in the following situations:

Normalization

Identifiers are normalized using Normalization Form C (NFC) as defined in Unicode Standard Annex #15. Two identifiers are equal if their NFC forms are equal.

Procedural and declarative macros receive normalized identifiers in their input.

Raw identifiers

A raw identifier is like a normal identifier, but prefixed by r#. (Note that the r# prefix is not included as part of the actual identifier.) Unlike a normal identifier, a raw identifier may be any strict or reserved keyword except the ones listed above for RAW_IDENTIFIER.

Comments

Lexer
LINE_COMMENT :
      // (~[/ ! \n] | //) ~\n*
   | //

BLOCK_COMMENT :
      /* (~[* !] | ** | BlockCommentOrDoc) (BlockCommentOrDoc | ~*/)* */
   | /**/
   | /***/

INNER_LINE_DOC :
   //! ~[\n IsolatedCR]*

INNER_BLOCK_DOC :
   /*! ( BlockCommentOrDoc | ~[*/ IsolatedCR] )* */

OUTER_LINE_DOC :
   /// (~/ ~[\n IsolatedCR]*)?

OUTER_BLOCK_DOC :
   /** (~* | BlockCommentOrDoc ) (BlockCommentOrDoc | ~[*/ IsolatedCR])* */

BlockCommentOrDoc :
      BLOCK_COMMENT
   | OUTER_BLOCK_DOC
   | INNER_BLOCK_DOC

IsolatedCR :
   \r

Non-doc comments

Comments follow the general C++ style of line (//) and block (/* ... */) comment forms. Nested block comments are supported.

Non-doc comments are interpreted as a form of whitespace.

Doc comments

Line doc comments beginning with exactly three slashes (///), and block doc comments (/** ... */), both outer doc comments, are interpreted as a special syntax for doc attributes. That is, they are equivalent to writing #[doc="..."] around the body of the comment, i.e., /// Foo turns into #[doc="Foo"] and /** Bar */ turns into #[doc="Bar"].

Line comments beginning with //! and block comments /*! ... */ are doc comments that apply to the parent of the comment, rather than the item that follows. That is, they are equivalent to writing #![doc="..."] around the body of the comment. //! comments are usually used to document modules that occupy a source file.

The character U+000D (CR) is not allowed in doc comments.

Note: The sequence U+000D (CR) immediately followed by U+000A (LF) would have been previously transformed into a single U+000A (LF).

Examples

#![allow(unused)]
fn main() {
//! A doc comment that applies to the implicit anonymous module of this crate

pub mod outer_module {

    //!  - Inner line doc
    //!! - Still an inner line doc (but with a bang at the beginning)

    /*!  - Inner block doc */
    /*!! - Still an inner block doc (but with a bang at the beginning) */

    //   - Only a comment
    ///  - Outer line doc (exactly 3 slashes)
    //// - Only a comment

    /*   - Only a comment */
    /**  - Outer block doc (exactly) 2 asterisks */
    /*** - Only a comment */

    pub mod inner_module {}

    pub mod nested_comments {
        /* In Rust /* we can /* nest comments */ */ */

        // All three types of block comments can contain or be nested inside
        // any other type:

        /*   /* */  /** */  /*! */  */
        /*!  /* */  /** */  /*! */  */
        /**  /* */  /** */  /*! */  */
        pub mod dummy_item {}
    }

    pub mod degenerate_cases {
        // empty inner line doc
        //!

        // empty inner block doc
        /*!*/

        // empty line comment
        //

        // empty outer line doc
        ///

        // empty block comment
        /**/

        pub mod dummy_item {}

        // empty 2-asterisk block isn't a doc block, it is a block comment
        /***/

    }

    /* The next one isn't allowed because outer doc comments
       require an item that will receive the doc */

    /// Where is my item?
  mod boo {}
}
}

Whitespace

Whitespace is any non-empty string containing only characters that have the Pattern_White_Space Unicode property, namely:

  • U+0009 (horizontal tab, '\t')
  • U+000A (line feed, '\n')
  • U+000B (vertical tab)
  • U+000C (form feed)
  • U+000D (carriage return, '\r')
  • U+0020 (space, ' ')
  • U+0085 (next line)
  • U+200E (left-to-right mark)
  • U+200F (right-to-left mark)
  • U+2028 (line separator)
  • U+2029 (paragraph separator)

Rust is a “free-form” language, meaning that all forms of whitespace serve only to separate tokens in the grammar, and have no semantic significance.

A Rust program has identical meaning if each whitespace element is replaced with any other legal whitespace element, such as a single space character.

Tokens

Tokens are primitive productions in the grammar defined by regular (non-recursive) languages. Rust source input can be broken down into the following kinds of tokens:

Within this documentation’s grammar, “simple” tokens are given in string table production form, and appear in monospace font.

Literals

Literals are tokens used in literal expressions.

Examples

Characters and strings

Example# sets1CharactersEscapes
Character'H'0All UnicodeQuote & ASCII & Unicode
String"hello"0All UnicodeQuote & ASCII & Unicode
Raw stringr#"hello"#<256All UnicodeN/A
Byteb'H'0All ASCIIQuote & Byte
Byte stringb"hello"0All ASCIIQuote & Byte
Raw byte stringbr#"hello"#<256All ASCIIN/A
C stringc"hello"0All UnicodeQuote & Byte & Unicode
Raw C stringcr#"hello"#<256All UnicodeN/A
1

The number of #s on each side of the same literal must be equivalent.

Note: Character and string literal tokens never include the sequence of U+000D (CR) immediately followed by U+000A (LF): this pair would have been previously transformed into a single U+000A (LF).

ASCII escapes

Name
\x417-bit character code (exactly 2 digits, up to 0x7F)
\nNewline
\rCarriage return
\tTab
\\Backslash
\0Null

Byte escapes

Name
\x7F8-bit character code (exactly 2 digits)
\nNewline
\rCarriage return
\tTab
\\Backslash
\0Null

Unicode escapes

Name
\u{7FFF}24-bit Unicode character code (up to 6 digits)

Quote escapes

Name
\'Single quote
\"Double quote

Numbers

Number literals2ExampleExponentiation
Decimal integer98_222N/A
Hex integer0xffN/A
Octal integer0o77N/A
Binary integer0b1111_0000N/A
Floating-point123.0E+77Optional
2

All number literals allow _ as a visual separator: 1_234.0E+18f64

Suffixes

A suffix is a sequence of characters following the primary part of a literal (without intervening whitespace), of the same form as a non-raw identifier or keyword.

Lexer
SUFFIX : IDENTIFIER_OR_KEYWORD
SUFFIX_NO_E : SUFFIX not beginning with e or E

Any kind of literal (string, integer, etc) with any suffix is valid as a token.

A literal token with any suffix can be passed to a macro without producing an error. The macro itself will decide how to interpret such a token and whether to produce an error or not. In particular, the literal fragment specifier for by-example macros matches literal tokens with arbitrary suffixes.

#![allow(unused)]
fn main() {
macro_rules! blackhole { ($tt:tt) => () }
macro_rules! blackhole_lit { ($l:literal) => () }

blackhole!("string"suffix); // OK
blackhole_lit!(1suffix); // OK
}

However, suffixes on literal tokens which are interpreted as literal expressions or patterns are restricted. Any suffixes are rejected on non-numeric literal tokens, and numeric literal tokens are accepted only with suffixes from the list below.

IntegerFloating-point
u8, i8, u16, i16, u32, i32, u64, i64, u128, i128, usize, isizef32, f64

Character and string literals

Character literals

Lexer
CHAR_LITERAL :
   ' ( ~[' \ \n \r \t] | QUOTE_ESCAPE | ASCII_ESCAPE | UNICODE_ESCAPE ) ' SUFFIX?

QUOTE_ESCAPE :
   \' | \"

ASCII_ESCAPE :
      \x OCT_DIGIT HEX_DIGIT
   | \n | \r | \t | \\ | \0

UNICODE_ESCAPE :
   \u{ ( HEX_DIGIT _* )1..6 }

A character literal is a single Unicode character enclosed within two U+0027 (single-quote) characters, with the exception of U+0027 itself, which must be escaped by a preceding U+005C character (\).

String literals

Lexer
STRING_LITERAL :
   " (
      ~[" \ IsolatedCR]
      | QUOTE_ESCAPE
      | ASCII_ESCAPE
      | UNICODE_ESCAPE
      | STRING_CONTINUE
   )* " SUFFIX?

STRING_CONTINUE :
   \ followed by \n

A string literal is a sequence of any Unicode characters enclosed within two U+0022 (double-quote) characters, with the exception of U+0022 itself, which must be escaped by a preceding U+005C character (\).

Line-breaks, represented by the character U+000A (LF), are allowed in string literals. When an unescaped U+005C character (\) occurs immediately before a line break, the line break does not appear in the string represented by the token. See String continuation escapes for details. The character U+000D (CR) may not appear in a string literal other than as part of such a string continuation escape.

Character escapes

Some additional escapes are available in either character or non-raw string literals. An escape starts with a U+005C (\) and continues with one of the following forms:

  • A 7-bit code point escape starts with U+0078 (x) and is followed by exactly two hex digits with value up to 0x7F. It denotes the ASCII character with value equal to the provided hex value. Higher values are not permitted because it is ambiguous whether they mean Unicode code points or byte values.
  • A 24-bit code point escape starts with U+0075 (u) and is followed by up to six hex digits surrounded by braces U+007B ({) and U+007D (}). It denotes the Unicode code point equal to the provided hex value.
  • A whitespace escape is one of the characters U+006E (n), U+0072 (r), or U+0074 (t), denoting the Unicode values U+000A (LF), U+000D (CR) or U+0009 (HT) respectively.
  • The null escape is the character U+0030 (0) and denotes the Unicode value U+0000 (NUL).
  • The backslash escape is the character U+005C (\) which must be escaped in order to denote itself.

Raw string literals

Lexer
RAW_STRING_LITERAL :
   r RAW_STRING_CONTENT SUFFIX?

RAW_STRING_CONTENT :
      " ( ~ IsolatedCR )* (non-greedy) "
   | # RAW_STRING_CONTENT #

Raw string literals do not process any escapes. They start with the character U+0072 (r), followed by fewer than 256 of the character U+0023 (#) and a U+0022 (double-quote) character.

The raw string body can contain any sequence of Unicode characters other than U+000D (CR). It is terminated only by another U+0022 (double-quote) character, followed by the same number of U+0023 (#) characters that preceded the opening U+0022 (double-quote) character.

All Unicode characters contained in the raw string body represent themselves, the characters U+0022 (double-quote) (except when followed by at least as many U+0023 (#) characters as were used to start the raw string literal) or U+005C (\) do not have any special meaning.

Examples for string literals:

#![allow(unused)]
fn main() {
"foo"; r"foo";                     // foo
"\"foo\""; r#""foo""#;             // "foo"

"foo #\"# bar";
r##"foo #"# bar"##;                // foo #"# bar

"\x52"; "R"; r"R";                 // R
"\\x52"; r"\x52";                  // \x52
}

Byte and byte string literals

Byte literals

Lexer
BYTE_LITERAL :
   b' ( ASCII_FOR_CHAR | BYTE_ESCAPE ) ' SUFFIX?

ASCII_FOR_CHAR :
   any ASCII (i.e. 0x00 to 0x7F), except ', \, \n, \r or \t

BYTE_ESCAPE :
      \x HEX_DIGIT HEX_DIGIT
   | \n | \r | \t | \\ | \0 | \' | \"

A byte literal is a single ASCII character (in the U+0000 to U+007F range) or a single escape preceded by the characters U+0062 (b) and U+0027 (single-quote), and followed by the character U+0027. If the character U+0027 is present within the literal, it must be escaped by a preceding U+005C (\) character. It is equivalent to a u8 unsigned 8-bit integer number literal.

Byte string literals

Lexer
BYTE_STRING_LITERAL :
   b" ( ASCII_FOR_STRING | BYTE_ESCAPE | STRING_CONTINUE )* " SUFFIX?

ASCII_FOR_STRING :
   any ASCII (i.e 0x00 to 0x7F), except ", \ and IsolatedCR

A non-raw byte string literal is a sequence of ASCII characters and escapes, preceded by the characters U+0062 (b) and U+0022 (double-quote), and followed by the character U+0022. If the character U+0022 is present within the literal, it must be escaped by a preceding U+005C (\) character. Alternatively, a byte string literal can be a raw byte string literal, defined below.

Line-breaks, represented by the character U+000A (LF), are allowed in byte string literals. When an unescaped U+005C character (\) occurs immediately before a line break, the line break does not appear in the string represented by the token. See String continuation escapes for details. The character U+000D (CR) may not appear in a byte string literal other than as part of such a string continuation escape.

Some additional escapes are available in either byte or non-raw byte string literals. An escape starts with a U+005C (\) and continues with one of the following forms:

  • A byte escape escape starts with U+0078 (x) and is followed by exactly two hex digits. It denotes the byte equal to the provided hex value.
  • A whitespace escape is one of the characters U+006E (n), U+0072 (r), or U+0074 (t), denoting the bytes values 0x0A (ASCII LF), 0x0D (ASCII CR) or 0x09 (ASCII HT) respectively.
  • The null escape is the character U+0030 (0) and denotes the byte value 0x00 (ASCII NUL).
  • The backslash escape is the character U+005C (\) which must be escaped in order to denote its ASCII encoding 0x5C.

Raw byte string literals

Lexer
RAW_BYTE_STRING_LITERAL :
   br RAW_BYTE_STRING_CONTENT SUFFIX?

RAW_BYTE_STRING_CONTENT :
      " ASCII_FOR_RAW* (non-greedy) "
   | # RAW_BYTE_STRING_CONTENT #

ASCII_FOR_RAW :
   any ASCII (i.e. 0x00 to 0x7F) except IsolatedCR

Raw byte string literals do not process any escapes. They start with the character U+0062 (b), followed by U+0072 (r), followed by fewer than 256 of the character U+0023 (#), and a U+0022 (double-quote) character.

The raw string body can contain any sequence of ASCII characters other than U+000D (CR). It is terminated only by another U+0022 (double-quote) character, followed by the same number of U+0023 (#) characters that preceded the opening U+0022 (double-quote) character. A raw byte string literal can not contain any non-ASCII byte.

All characters contained in the raw string body represent their ASCII encoding, the characters U+0022 (double-quote) (except when followed by at least as many U+0023 (#) characters as were used to start the raw string literal) or U+005C (\) do not have any special meaning.

Examples for byte string literals:

#![allow(unused)]
fn main() {
b"foo"; br"foo";                     // foo
b"\"foo\""; br#""foo""#;             // "foo"

b"foo #\"# bar";
br##"foo #"# bar"##;                 // foo #"# bar

b"\x52"; b"R"; br"R";                // R
b"\\x52"; br"\x52";                  // \x52
}

C string and raw C string literals

C string literals

Lexer
C_STRING_LITERAL :
   c" (
      ~[" \ IsolatedCR NUL]
      | BYTE_ESCAPE except \0 or \x00
      | UNICODE_ESCAPE except \u{0}, \u{00}, …, \u{000000}
      | STRING_CONTINUE
   )* " SUFFIX?

A C string literal is a sequence of Unicode characters and escapes, preceded by the characters U+0063 (c) and U+0022 (double-quote), and followed by the character U+0022. If the character U+0022 is present within the literal, it must be escaped by a preceding U+005C (\) character. Alternatively, a C string literal can be a raw C string literal, defined below.

C strings are implicitly terminated by byte 0x00, so the C string literal c"" is equivalent to manually constructing a &CStr from the byte string literal b"\x00". Other than the implicit terminator, byte 0x00 is not permitted within a C string.

Line-breaks, represented by the character U+000A (LF), are allowed in C string literals. When an unescaped U+005C character (\) occurs immediately before a line break, the line break does not appear in the string represented by the token. See String continuation escapes for details. The character U+000D (CR) may not appear in a C string literal other than as part of such a string continuation escape.

Some additional escapes are available in non-raw C string literals. An escape starts with a U+005C (\) and continues with one of the following forms:

  • A byte escape escape starts with U+0078 (x) and is followed by exactly two hex digits. It denotes the byte equal to the provided hex value.
  • A 24-bit code point escape starts with U+0075 (u) and is followed by up to six hex digits surrounded by braces U+007B ({) and U+007D (}). It denotes the Unicode code point equal to the provided hex value, encoded as UTF-8.
  • A whitespace escape is one of the characters U+006E (n), U+0072 (r), or U+0074 (t), denoting the bytes values 0x0A (ASCII LF), 0x0D (ASCII CR) or 0x09 (ASCII HT) respectively.
  • The backslash escape is the character U+005C (\) which must be escaped in order to denote its ASCII encoding 0x5C.

A C string represents bytes with no defined encoding, but a C string literal may contain Unicode characters above U+007F. Such characters will be replaced with the bytes of that character’s UTF-8 representation.

The following C string literals are equivalent:

#![allow(unused)]
fn main() {
c"æ";        // LATIN SMALL LETTER AE (U+00E6)
c"\u{00E6}";
c"\xC3\xA6";
}

Edition differences: C string literals are accepted in the 2021 edition or later. In earlier additions the token c"" is lexed as c "".

Raw C string literals

Lexer
RAW_C_STRING_LITERAL :
   cr RAW_C_STRING_CONTENT SUFFIX?

RAW_C_STRING_CONTENT :
      " ( ~ IsolatedCR NUL )* (non-greedy) "
   | # RAW_C_STRING_CONTENT #

Raw C string literals do not process any escapes. They start with the character U+0063 (c), followed by U+0072 (r), followed by fewer than 256 of the character U+0023 (#), and a U+0022 (double-quote) character.

The raw C string body can contain any sequence of Unicode characters other than U+0000 (NUL) and U+000D (CR). It is terminated only by another U+0022 (double-quote) character, followed by the same number of U+0023 (#) characters that preceded the opening U+0022 (double-quote) character.

All characters contained in the raw C string body represent themselves in UTF-8 encoding. The characters U+0022 (double-quote) (except when followed by at least as many U+0023 (#) characters as were used to start the raw C string literal) or U+005C (\) do not have any special meaning.

Edition differences: Raw C string literals are accepted in the 2021 edition or later. In earlier additions the token cr"" is lexed as cr "", and cr#""# is lexed as cr #""# (which is non-grammatical).

Examples for C string and raw C string literals

#![allow(unused)]
fn main() {
c"foo"; cr"foo";                     // foo
c"\"foo\""; cr#""foo""#;             // "foo"

c"foo #\"# bar";
cr##"foo #"# bar"##;                 // foo #"# bar

c"\x52"; c"R"; cr"R";                // R
c"\\x52"; cr"\x52";                  // \x52
}

Number literals

A number literal is either an integer literal or a floating-point literal. The grammar for recognizing the two kinds of literals is mixed.

Integer literals

Lexer
INTEGER_LITERAL :
   ( DEC_LITERAL | BIN_LITERAL | OCT_LITERAL | HEX_LITERAL ) SUFFIX_NO_E?

DEC_LITERAL :
   DEC_DIGIT (DEC_DIGIT|_)*

BIN_LITERAL :
   0b (BIN_DIGIT|_)* BIN_DIGIT (BIN_DIGIT|_)*

OCT_LITERAL :
   0o (OCT_DIGIT|_)* OCT_DIGIT (OCT_DIGIT|_)*

HEX_LITERAL :
   0x (HEX_DIGIT|_)* HEX_DIGIT (HEX_DIGIT|_)*

BIN_DIGIT : [0-1]

OCT_DIGIT : [0-7]

DEC_DIGIT : [0-9]

HEX_DIGIT : [0-9 a-f A-F]

An integer literal has one of four forms:

  • A decimal literal starts with a decimal digit and continues with any mixture of decimal digits and underscores.
  • A hex literal starts with the character sequence U+0030 U+0078 (0x) and continues as any mixture (with at least one digit) of hex digits and underscores.
  • An octal literal starts with the character sequence U+0030 U+006F (0o) and continues as any mixture (with at least one digit) of octal digits and underscores.
  • A binary literal starts with the character sequence U+0030 U+0062 (0b) and continues as any mixture (with at least one digit) of binary digits and underscores.

Like any literal, an integer literal may be followed (immediately, without any spaces) by a suffix as described above. The suffix may not begin with e or E, as that would be interpreted as the exponent of a floating-point literal. See Integer literal expressions for the effect of these suffixes.

Examples of integer literals which are accepted as literal expressions:

#![allow(unused)]
fn main() {
#![allow(overflowing_literals)]
123;
123i32;
123u32;
123_u32;

0xff;
0xff_u8;
0x01_f32; // integer 7986, not floating-point 1.0
0x01_e3;  // integer 483, not floating-point 1000.0

0o70;
0o70_i16;

0b1111_1111_1001_0000;
0b1111_1111_1001_0000i64;
0b________1;

0usize;

// These are too big for their type, but are accepted as literal expressions.
128_i8;
256_u8;

// This is an integer literal, accepted as a floating-point literal expression.
5f32;
}

Note that -1i8, for example, is analyzed as two tokens: - followed by 1i8.

Examples of integer literals which are not accepted as literal expressions:

#![allow(unused)]
fn main() {
#[cfg(FALSE)] {
0invalidSuffix;
123AFB43;
0b010a;
0xAB_CD_EF_GH;
0b1111_f32;
}
}

Tuple index

Lexer
TUPLE_INDEX:
   INTEGER_LITERAL

A tuple index is used to refer to the fields of tuples, tuple structs, and tuple variants.

Tuple indices are compared with the literal token directly. Tuple indices start with 0 and each successive index increments the value by 1 as a decimal value. Thus, only decimal values will match, and the value must not have any extra 0 prefix characters.

#![allow(unused)]
fn main() {
let example = ("dog", "cat", "horse");
let dog = example.0;
let cat = example.1;
// The following examples are invalid.
let cat = example.01;  // ERROR no field named `01`
let horse = example.0b10;  // ERROR no field named `0b10`
}

Note: Tuple indices may include certain suffixes, but this is not intended to be valid, and may be removed in a future version. See https://github.com/rust-lang/rust/issues/60210 for more information.

Floating-point literals

Lexer
FLOAT_LITERAL :
      DEC_LITERAL . (not immediately followed by ., _ or an XID_Start character)
   | DEC_LITERAL . DEC_LITERAL SUFFIX_NO_E?
   | DEC_LITERAL (. DEC_LITERAL)? FLOAT_EXPONENT SUFFIX?

FLOAT_EXPONENT :
   (e|E) (+|-)? (DEC_DIGIT|_)* DEC_DIGIT (DEC_DIGIT|_)*

A floating-point literal has one of two forms:

  • A decimal literal followed by a period character U+002E (.). This is optionally followed by another decimal literal, with an optional exponent.
  • A single decimal literal followed by an exponent.

Like integer literals, a floating-point literal may be followed by a suffix, so long as the pre-suffix part does not end with U+002E (.). The suffix may not begin with e or E if the literal does not include an exponent. See Floating-point literal expressions for the effect of these suffixes.

Examples of floating-point literals which are accepted as literal expressions:

#![allow(unused)]
fn main() {
123.0f64;
0.1f64;
0.1f32;
12E+99_f64;
let x: f64 = 2.;
}

This last example is different because it is not possible to use the suffix syntax with a floating point literal ending in a period. 2.f64 would attempt to call a method named f64 on 2.

Note that -1.0, for example, is analyzed as two tokens: - followed by 1.0.

Examples of floating-point literals which are not accepted as literal expressions:

#![allow(unused)]
fn main() {
#[cfg(FALSE)] {
2.0f80;
2e5f80;
2e5e6;
2.0e5e6;
1.3e10u64;
}
}

Reserved forms similar to number literals

Lexer
RESERVED_NUMBER :
      BIN_LITERAL [2-9​]
   | OCT_LITERAL [8-9​]
   | ( BIN_LITERAL | OCT_LITERAL | HEX_LITERAL ) .
         (not immediately followed by ., _ or an XID_Start character)
   | ( BIN_LITERAL | OCT_LITERAL ) (e|E)
   | 0b _* end of input or not BIN_DIGIT
   | 0o _* end of input or not OCT_DIGIT
   | 0x _* end of input or not HEX_DIGIT
   | DEC_LITERAL ( . DEC_LITERAL)? (e|E) (+|-)? end of input or not DEC_DIGIT

The following lexical forms similar to number literals are reserved forms. Due to the possible ambiguity these raise, they are rejected by the tokenizer instead of being interpreted as separate tokens.

  • An unsuffixed binary or octal literal followed, without intervening whitespace, by a decimal digit out of the range for its radix.

  • An unsuffixed binary, octal, or hexadecimal literal followed, without intervening whitespace, by a period character (with the same restrictions on what follows the period as for floating-point literals).

  • An unsuffixed binary or octal literal followed, without intervening whitespace, by the character e or E.

  • Input which begins with one of the radix prefixes but is not a valid binary, octal, or hexadecimal literal (because it contains no digits).

  • Input which has the form of a floating-point literal with no digits in the exponent.

Examples of reserved forms:

#![allow(unused)]
fn main() {
0b0102;  // this is not `0b010` followed by `2`
0o1279;  // this is not `0o127` followed by `9`
0x80.0;  // this is not `0x80` followed by `.` and `0`
0b101e;  // this is not a suffixed literal, or `0b101` followed by `e`
0b;      // this is not an integer literal, or `0` followed by `b`
0b_;     // this is not an integer literal, or `0` followed by `b_`
2e;      // this is not a floating-point literal, or `2` followed by `e`
2.0e;    // this is not a floating-point literal, or `2.0` followed by `e`
2em;     // this is not a suffixed literal, or `2` followed by `em`
2.0em;   // this is not a suffixed literal, or `2.0` followed by `em`
}

Lifetimes and loop labels

Lexer
LIFETIME_TOKEN :
      ' IDENTIFIER_OR_KEYWORD (not immediately followed by ')
   | '_ (not immediately followed by ')

LIFETIME_OR_LABEL :
      ' NON_KEYWORD_IDENTIFIER (not immediately followed by ')
   | '_ (not immediately followed by ')

Lifetime parameters and loop labels use LIFETIME_OR_LABEL tokens. Any LIFETIME_TOKEN will be accepted by the lexer, and for example, can be used in macros.

Punctuation

Punctuation symbol tokens are listed here for completeness. Their individual usages and meanings are defined in the linked pages.

SymbolNameUsage
+PlusAddition, Trait Bounds, Macro Kleene Matcher
-MinusSubtraction, Negation
*StarMultiplication, Dereference, Raw Pointers, Macro Kleene Matcher, Use wildcards
/SlashDivision
%PercentRemainder
^CaretBitwise and Logical XOR
!NotBitwise and Logical NOT, Macro Calls, Inner Attributes, Never Type, Negative impls
&AndBitwise and Logical AND, Borrow, References, Reference patterns
|OrBitwise and Logical OR, Closures, Patterns in match, if let, and while let
&&AndAndLazy AND, Borrow, References, Reference patterns
||OrOrLazy OR, Closures
<<ShlShift Left, Nested Generics
>>ShrShift Right, Nested Generics
+=PlusEqAddition assignment
-=MinusEqSubtraction assignment
*=StarEqMultiplication assignment
/=SlashEqDivision assignment
%=PercentEqRemainder assignment
^=CaretEqBitwise XOR assignment
&=AndEqBitwise And assignment
|=OrEqBitwise Or assignment
<<=ShlEqShift Left assignment
>>=ShrEqShift Right assignment, Nested Generics
=EqAssignment, Attributes, Various type definitions
==EqEqEqual
!=NeNot Equal
>GtGreater than, Generics, Paths
<LtLess than, Generics, Paths
>=GeGreater than or equal to, Generics
<=LeLess than or equal to
@AtSubpattern binding
_UnderscoreWildcard patterns, Inferred types, Unnamed items in constants, extern crates, use declarations, and destructuring assignment
.DotField access, Tuple index
..DotDotRange, Struct expressions, Patterns, Range Patterns
...DotDotDotVariadic functions, Range patterns
..=DotDotEqInclusive Range, Range patterns
,CommaVarious separators
;SemiTerminator for various items and statements, Array types
:ColonVarious separators
::PathSepPath separator
->RArrowFunction return type, Closure return type, Function pointer type
=>FatArrowMatch arms, Macros
<-LArrowThe left arrow symbol has been unused since before Rust 1.0, but it is still treated as a single token
#PoundAttributes
$DollarMacros
?QuestionQuestion mark operator, Questionably sized, Macro Kleene Matcher
~TildeThe tilde operator has been unused since before Rust 1.0, but its token may still be used

Delimiters

Bracket punctuation is used in various parts of the grammar. An open bracket must always be paired with a close bracket. Brackets and the tokens within them are referred to as “token trees” in macros. The three types of brackets are:

BracketType
{ }Curly braces
[ ]Square brackets
( )Parentheses

Reserved prefixes

Lexer 2021+
RESERVED_TOKEN_DOUBLE_QUOTE : ( IDENTIFIER_OR_KEYWORD Except b or c or r or br or cr | _ ) "
RESERVED_TOKEN_SINGLE_QUOTE : ( IDENTIFIER_OR_KEYWORD Except b | _ ) '
RESERVED_TOKEN_POUND : ( IDENTIFIER_OR_KEYWORD Except r or br or cr | _ ) #

Some lexical forms known as reserved prefixes are reserved for future use.

Source input which would otherwise be lexically interpreted as a non-raw identifier (or a keyword or _) which is immediately followed by a #, ', or " character (without intervening whitespace) is identified as a reserved prefix.

Note that raw identifiers, raw string literals, and raw byte string literals may contain a # character but are not interpreted as containing a reserved prefix.

Similarly the r, b, br, c, and cr prefixes used in raw string literals, byte literals, byte string literals, raw byte string literals, C string literals, and raw C string literals are not interpreted as reserved prefixes.

Edition differences: Starting with the 2021 edition, reserved prefixes are reported as an error by the lexer (in particular, they cannot be passed to macros).

Before the 2021 edition, reserved prefixes are accepted by the lexer and interpreted as multiple tokens (for example, one token for the identifier or keyword, followed by a # token).

Examples accepted in all editions:

#![allow(unused)]
fn main() {
macro_rules! lexes {($($_:tt)*) => {}}
lexes!{a #foo}
lexes!{continue 'foo}
lexes!{match "..." {}}
lexes!{r#let#foo}         // three tokens: r#let # foo
}

Examples accepted before the 2021 edition but rejected later:

#![allow(unused)]
fn main() {
macro_rules! lexes {($($_:tt)*) => {}}
lexes!{a#foo}
lexes!{continue'foo}
lexes!{match"..." {}}
}

Macros

The functionality and syntax of Rust can be extended with custom definitions called macros. They are given names, and invoked through a consistent syntax: some_extension!(...).

There are two ways to define new macros:

  • Macros by Example define new syntax in a higher-level, declarative way.
  • Procedural Macros define function-like macros, custom derives, and custom attributes using functions that operate on input tokens.

Macro Invocation

Syntax
MacroInvocation :
   SimplePath ! DelimTokenTree

DelimTokenTree :
      ( TokenTree* )
   | [ TokenTree* ]
   | { TokenTree* }

TokenTree :
   Tokenexcept delimiters | DelimTokenTree

MacroInvocationSemi :
      SimplePath ! ( TokenTree* ) ;
   | SimplePath ! [ TokenTree* ] ;
   | SimplePath ! { TokenTree* }

A macro invocation expands a macro at compile time and replaces the invocation with the result of the macro. Macros may be invoked in the following situations:

When used as an item or a statement, the MacroInvocationSemi form is used where a semicolon is required at the end when not using curly braces. Visibility qualifiers are never allowed before a macro invocation or macro_rules definition.

#![allow(unused)]
fn main() {
// Used as an expression.
let x = vec![1,2,3];

// Used as a statement.
println!("Hello!");

// Used in a pattern.
macro_rules! pat {
    ($i:ident) => (Some($i))
}

if let pat!(x) = Some(1) {
    assert_eq!(x, 1);
}

// Used in a type.
macro_rules! Tuple {
    { $A:ty, $B:ty } => { ($A, $B) };
}

type N2 = Tuple!(i32, i32);

// Used as an item.
use std::cell::RefCell;
thread_local!(static FOO: RefCell<u32> = RefCell::new(1));

// Used as an associated item.
macro_rules! const_maker {
    ($t:ty, $v:tt) => { const CONST: $t = $v; };
}
trait T {
    const_maker!{i32, 7}
}

// Macro calls within macros.
macro_rules! example {
    () => { println!("Macro call in a macro!") };
}
// Outer macro `example` is expanded, then inner macro `println` is expanded.
example!();
}

Macros By Example

Syntax
MacroRulesDefinition :
   macro_rules ! IDENTIFIER MacroRulesDef

MacroRulesDef :
      ( MacroRules ) ;
   | [ MacroRules ] ;
   | { MacroRules }

MacroRules :
   MacroRule ( ; MacroRule )* ;?

MacroRule :
   MacroMatcher => MacroTranscriber

MacroMatcher :
      ( MacroMatch* )
   | [ MacroMatch* ]
   | { MacroMatch* }

MacroMatch :
      Tokenexcept $ and delimiters
   | MacroMatcher
   | $ ( IDENTIFIER_OR_KEYWORD except crate | RAW_IDENTIFIER | _ ) : MacroFragSpec
   | $ ( MacroMatch+ ) MacroRepSep? MacroRepOp

MacroFragSpec :
      block | expr | ident | item | lifetime | literal
   | meta | pat | pat_param | path | stmt | tt | ty | vis

MacroRepSep :
   Tokenexcept delimiters and MacroRepOp

MacroRepOp :
   * | + | ?

MacroTranscriber :
   DelimTokenTree

macro_rules allows users to define syntax extension in a declarative way. We call such extensions “macros by example” or simply “macros”.

Each macro by example has a name, and one or more rules. Each rule has two parts: a matcher, describing the syntax that it matches, and a transcriber, describing the syntax that will replace a successfully matched invocation. Both the matcher and the transcriber must be surrounded by delimiters. Macros can expand to expressions, statements, items (including traits, impls, and foreign items), types, or patterns.

Transcribing

When a macro is invoked, the macro expander looks up macro invocations by name, and tries each macro rule in turn. It transcribes the first successful match; if this results in an error, then future matches are not tried. When matching, no lookahead is performed; if the compiler cannot unambiguously determine how to parse the macro invocation one token at a time, then it is an error. In the following example, the compiler does not look ahead past the identifier to see if the following token is a ), even though that would allow it to parse the invocation unambiguously:

#![allow(unused)]
fn main() {
macro_rules! ambiguity {
    ($($i:ident)* $j:ident) => { };
}

ambiguity!(error); // Error: local ambiguity
}

In both the matcher and the transcriber, the $ token is used to invoke special behaviours from the macro engine (described below in Metavariables and Repetitions). Tokens that aren’t part of such an invocation are matched and transcribed literally, with one exception. The exception is that the outer delimiters for the matcher will match any pair of delimiters. Thus, for instance, the matcher (()) will match {()} but not {{}}. The character $ cannot be matched or transcribed literally.

Forwarding a matched fragment

When forwarding a matched fragment to another macro-by-example, matchers in the second macro will see an opaque AST of the fragment type. The second macro can’t use literal tokens to match the fragments in the matcher, only a fragment specifier of the same type. The ident, lifetime, and tt fragment types are an exception, and can be matched by literal tokens. The following illustrates this restriction:

#![allow(unused)]
fn main() {
macro_rules! foo {
    ($l:expr) => { bar!($l); }
// ERROR:               ^^ no rules expected this token in macro call
}

macro_rules! bar {
    (3) => {}
}

foo!(3);
}

The following illustrates how tokens can be directly matched after matching a tt fragment:

#![allow(unused)]
fn main() {
// compiles OK
macro_rules! foo {
    ($l:tt) => { bar!($l); }
}

macro_rules! bar {
    (3) => {}
}

foo!(3);
}

Metavariables

In the matcher, $ name : fragment-specifier matches a Rust syntax fragment of the kind specified and binds it to the metavariable $name. Valid fragment specifiers are:

In the transcriber, metavariables are referred to simply by $name, since the fragment kind is specified in the matcher. Metavariables are replaced with the syntax element that matched them. The keyword metavariable $crate can be used to refer to the current crate; see Hygiene below. Metavariables can be transcribed more than once or not at all.

For reasons of backwards compatibility, though _ is also an expression, a standalone underscore is not matched by the expr fragment specifier. However, _ is matched by the expr fragment specifier when it appears as a subexpression. For the same reason, a standalone const block is not matched but it is matched when appearing as a subexpression.

Edition differences: Starting with the 2021 edition, pat fragment-specifiers match top-level or-patterns (that is, they accept Pattern).

Before the 2021 edition, they match exactly the same fragments as pat_param (that is, they accept PatternNoTopAlt).

The relevant edition is the one in effect for the macro_rules! definition.

Repetitions

In both the matcher and transcriber, repetitions are indicated by placing the tokens to be repeated inside $(), followed by a repetition operator, optionally with a separator token between. The separator token can be any token other than a delimiter or one of the repetition operators, but ; and , are the most common. For instance, $( $i:ident ),* represents any number of identifiers separated by commas. Nested repetitions are permitted.

The repetition operators are:

  • * — indicates any number of repetitions.
  • + — indicates any number but at least one.
  • ? — indicates an optional fragment with zero or one occurrence.

Since ? represents at most one occurrence, it cannot be used with a separator.

The repeated fragment both matches and transcribes to the specified number of the fragment, separated by the separator token. Metavariables are matched to every repetition of their corresponding fragment. For instance, the $( $i:ident ),* example above matches $i to all of the identifiers in the list.

During transcription, additional restrictions apply to repetitions so that the compiler knows how to expand them properly:

  1. A metavariable must appear in exactly the same number, kind, and nesting order of repetitions in the transcriber as it did in the matcher. So for the matcher $( $i:ident ),*, the transcribers => { $i }, => { $( $( $i)* )* }, and => { $( $i )+ } are all illegal, but => { $( $i );* } is correct and replaces a comma-separated list of identifiers with a semicolon-separated list.
  2. Each repetition in the transcriber must contain at least one metavariable to decide how many times to expand it. If multiple metavariables appear in the same repetition, they must be bound to the same number of fragments. For instance, ( $( $i:ident ),* ; $( $j:ident ),* ) => (( $( ($i,$j) ),* )) must bind the same number of $i fragments as $j fragments. This means that invoking the macro with (a, b, c; d, e, f) is legal and expands to ((a,d), (b,e), (c,f)), but (a, b, c; d, e) is illegal because it does not have the same number. This requirement applies to every layer of nested repetitions.

Scoping, Exporting, and Importing

For historical reasons, the scoping of macros by example does not work entirely like items. Macros have two forms of scope: textual scope, and path-based scope. Textual scope is based on the order that things appear in source files, or even across multiple files, and is the default scoping. It is explained further below. Path-based scope works exactly the same way that item scoping does. The scoping, exporting, and importing of macros is controlled largely by attributes.

When a macro is invoked by an unqualified identifier (not part of a multi-part path), it is first looked up in textual scoping. If this does not yield any results, then it is looked up in path-based scoping. If the macro’s name is qualified with a path, then it is only looked up in path-based scoping.

use lazy_static::lazy_static; // Path-based import.

macro_rules! lazy_static { // Textual definition.
    (lazy) => {};
}

lazy_static!{lazy} // Textual lookup finds our macro first.
self::lazy_static!{} // Path-based lookup ignores our macro, finds imported one.

Textual Scope

Textual scope is based largely on the order that things appear in source files, and works similarly to the scope of local variables declared with let except it also applies at the module level. When macro_rules! is used to define a macro, the macro enters the scope after the definition (note that it can still be used recursively, since names are looked up from the invocation site), up until its surrounding scope, typically a module, is closed. This can enter child modules and even span across multiple files:

//// src/lib.rs
mod has_macro {
    // m!{} // Error: m is not in scope.

    macro_rules! m {
        () => {};
    }
    m!{} // OK: appears after declaration of m.

    mod uses_macro;
}

// m!{} // Error: m is not in scope.

//// src/has_macro/uses_macro.rs

m!{} // OK: appears after declaration of m in src/lib.rs

It is not an error to define a macro multiple times; the most recent declaration will shadow the previous one unless it has gone out of scope.

#![allow(unused)]
fn main() {
macro_rules! m {
    (1) => {};
}

m!(1);

mod inner {
    m!(1);

    macro_rules! m {
        (2) => {};
    }
    // m!(1); // Error: no rule matches '1'
    m!(2);

    macro_rules! m {
        (3) => {};
    }
    m!(3);
}

m!(1);
}

Macros can be declared and used locally inside functions as well, and work similarly:

#![allow(unused)]
fn main() {
fn foo() {
    // m!(); // Error: m is not in scope.
    macro_rules! m {
        () => {};
    }
    m!();
}


// m!(); // Error: m is not in scope.
}

The macro_use attribute

The macro_use attribute has two purposes. First, it can be used to make a module’s macro scope not end when the module is closed, by applying it to a module:

#![allow(unused)]
fn main() {
#[macro_use]
mod inner {
    macro_rules! m {
        () => {};
    }
}

m!();
}

Second, it can be used to import macros from another crate, by attaching it to an extern crate declaration appearing in the crate’s root module. Macros imported this way are imported into the macro_use prelude, not textually, which means that they can be shadowed by any other name. While macros imported by #[macro_use] can be used before the import statement, in case of a conflict, the last macro imported wins. Optionally, a list of macros to import can be specified using the MetaListIdents syntax; this is not supported when #[macro_use] is applied to a module.

#[macro_use(lazy_static)] // Or #[macro_use] to import all macros.
extern crate lazy_static;

lazy_static!{}
// self::lazy_static!{} // Error: lazy_static is not defined in `self`

Macros to be imported with #[macro_use] must be exported with #[macro_export], which is described below.

Path-Based Scope

By default, a macro has no path-based scope. However, if it has the #[macro_export] attribute, then it is declared in the crate root scope and can be referred to normally as such:

#![allow(unused)]
fn main() {
self::m!();
m!(); // OK: Path-based lookup finds m in the current module.

mod inner {
    super::m!();
    crate::m!();
}

mod mac {
    #[macro_export]
    macro_rules! m {
        () => {};
    }
}
}

Macros labeled with #[macro_export] are always pub and can be referred to by other crates, either by path or by #[macro_use] as described above.

Hygiene

By default, all identifiers referred to in a macro are expanded as-is, and are looked up at the macro’s invocation site. This can lead to issues if a macro refers to an item or macro which isn’t in scope at the invocation site. To alleviate this, the $crate metavariable can be used at the start of a path to force lookup to occur inside the crate defining the macro.

//// Definitions in the `helper_macro` crate.
#[macro_export]
macro_rules! helped {
    // () => { helper!() } // This might lead to an error due to 'helper' not being in scope.
    () => { $crate::helper!() }
}

#[macro_export]
macro_rules! helper {
    () => { () }
}

//// Usage in another crate.
// Note that `helper_macro::helper` is not imported!
use helper_macro::helped;

fn unit() {
    helped!();
}

Note that, because $crate refers to the current crate, it must be used with a fully qualified module path when referring to non-macro items:

#![allow(unused)]
fn main() {
pub mod inner {
    #[macro_export]
    macro_rules! call_foo {
        () => { $crate::inner::foo() };
    }

    pub fn foo() {}
}
}

Additionally, even though $crate allows a macro to refer to items within its own crate when expanding, its use has no effect on visibility. An item or macro referred to must still be visible from the invocation site. In the following example, any attempt to invoke call_foo!() from outside its crate will fail because foo() is not public.

#![allow(unused)]
fn main() {
#[macro_export]
macro_rules! call_foo {
    () => { $crate::foo() };
}

fn foo() {}
}

Version & Edition differences: Prior to Rust 1.30, $crate and local_inner_macros (below) were unsupported. They were added alongside path-based imports of macros (described above), to ensure that helper macros did not need to be manually imported by users of a macro-exporting crate. Crates written for earlier versions of Rust that use helper macros need to be modified to use $crate or local_inner_macros to work well with path-based imports.

When a macro is exported, the #[macro_export] attribute can have the local_inner_macros keyword added to automatically prefix all contained macro invocations with $crate::. This is intended primarily as a tool to migrate code written before $crate was added to the language to work with Rust 2018’s path-based imports of macros. Its use is discouraged in new code.

#![allow(unused)]
fn main() {
#[macro_export(local_inner_macros)]
macro_rules! helped {
    () => { helper!() } // Automatically converted to $crate::helper!().
}

#[macro_export]
macro_rules! helper {
    () => { () }
}
}

Follow-set Ambiguity Restrictions

The parser used by the macro system is reasonably powerful, but it is limited in order to prevent ambiguity in current or future versions of the language. In particular, in addition to the rule about ambiguous expansions, a nonterminal matched by a metavariable must be followed by a token which has been decided can be safely used after that kind of match.

As an example, a macro matcher like $i:expr [ , ] could in theory be accepted in Rust today, since [,] cannot be part of a legal expression and therefore the parse would always be unambiguous. However, because [ can start trailing expressions, [ is not a character which can safely be ruled out as coming after an expression. If [,] were accepted in a later version of Rust, this matcher would become ambiguous or would misparse, breaking working code. Matchers like $i:expr, or $i:expr; would be legal, however, because , and ; are legal expression separators. The specific rules are:

  • expr and stmt may only be followed by one of: =>, ,, or ;.
  • pat_param may only be followed by one of: =>, ,, =, |, if, or in.
  • pat may only be followed by one of: =>, ,, =, if, or in.
  • path and ty may only be followed by one of: =>, ,, =, |, ;, :, >, >>, [, {, as, where, or a macro variable of block fragment specifier.
  • vis may only be followed by one of: ,, an identifier other than a non-raw priv, any token that can begin a type, or a metavariable with a ident, ty, or path fragment specifier.
  • All other fragment specifiers have no restrictions.

Edition differences: Before the 2021 edition, pat may also be followed by |.

When repetitions are involved, then the rules apply to every possible number of expansions, taking separators into account. This means:

  • If the repetition includes a separator, that separator must be able to follow the contents of the repetition.
  • If the repetition can repeat multiple times (* or +), then the contents must be able to follow themselves.
  • The contents of the repetition must be able to follow whatever comes before, and whatever comes after must be able to follow the contents of the repetition.
  • If the repetition can match zero times (* or ?), then whatever comes after must be able to follow whatever comes before.

For more detail, see the formal specification.

Procedural Macros

Procedural macros allow creating syntax extensions as execution of a function. Procedural macros come in one of three flavors:

Procedural macros allow you to run code at compile time that operates over Rust syntax, both consuming and producing Rust syntax. You can sort of think of procedural macros as functions from an AST to another AST.

Procedural macros must be defined in the root of a crate with the crate type of proc-macro. The macros may not be used from the crate where they are defined, and can only be used when imported in another crate.

Note: When using Cargo, Procedural macro crates are defined with the proc-macro key in your manifest:

[lib]
proc-macro = true

As functions, they must either return syntax, panic, or loop endlessly. Returned syntax either replaces or adds the syntax depending on the kind of procedural macro. Panics are caught by the compiler and are turned into a compiler error. Endless loops are not caught by the compiler which hangs the compiler.

Procedural macros run during compilation, and thus have the same resources that the compiler has. For example, standard input, error, and output are the same that the compiler has access to. Similarly, file access is the same. Because of this, procedural macros have the same security concerns that Cargo’s build scripts have.

Procedural macros have two ways of reporting errors. The first is to panic. The second is to emit a compile_error macro invocation.

The proc_macro crate

Procedural macro crates almost always will link to the compiler-provided proc_macro crate. The proc_macro crate provides types required for writing procedural macros and facilities to make it easier.

This crate primarily contains a TokenStream type. Procedural macros operate over token streams instead of AST nodes, which is a far more stable interface over time for both the compiler and for procedural macros to target. A token stream is roughly equivalent to Vec<TokenTree> where a TokenTree can roughly be thought of as lexical token. For example foo is an Ident token, . is a Punct token, and 1.2 is a Literal token. The TokenStream type, unlike Vec<TokenTree>, is cheap to clone.

All tokens have an associated Span. A Span is an opaque value that cannot be modified but can be manufactured. Spans represent an extent of source code within a program and are primarily used for error reporting. While you cannot modify a Span itself, you can always change the Span associated with any token, such as through getting a Span from another token.

Procedural macro hygiene

Procedural macros are unhygienic. This means they behave as if the output token stream was simply written inline to the code it’s next to. This means that it’s affected by external items and also affects external imports.

Macro authors need to be careful to ensure their macros work in as many contexts as possible given this limitation. This often includes using absolute paths to items in libraries (for example, ::std::option::Option instead of Option) or by ensuring that generated functions have names that are unlikely to clash with other functions (like __internal_foo instead of foo).

Function-like procedural macros

Function-like procedural macros are procedural macros that are invoked using the macro invocation operator (!).

These macros are defined by a public function with the proc_macro attribute and a signature of (TokenStream) -> TokenStream. The input TokenStream is what is inside the delimiters of the macro invocation and the output TokenStream replaces the entire macro invocation. The proc_macro attribute defines the macro in the macro namespace in the root of the crate.

For example, the following macro definition ignores its input and outputs a function answer into its scope.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro]
pub fn make_answer(_item: TokenStream) -> TokenStream {
    "fn answer() -> u32 { 42 }".parse().unwrap()
}

And then we use it in a binary crate to print “42” to standard output.

extern crate proc_macro_examples;
use proc_macro_examples::make_answer;

make_answer!();

fn main() {
    println!("{}", answer());
}

Function-like procedural macros may be invoked in any macro invocation position, which includes statements, expressions, patterns, type expressions, item positions, including items in extern blocks, inherent and trait implementations, and trait definitions.

Derive macros

Derive macros define new inputs for the derive attribute. These macros can create new items given the token stream of a struct, enum, or union. They can also define derive macro helper attributes.

Custom derive macros are defined by a public function with the proc_macro_derive attribute and a signature of (TokenStream) -> TokenStream. The proc_macro_derive attribute defines the custom derive in the macro namespace in the root of the crate.

The input TokenStream is the token stream of the item that has the derive attribute on it. The output TokenStream must be a set of items that are then appended to the module or block that the item from the input TokenStream is in.

The following is an example of a derive macro. Instead of doing anything useful with its input, it just appends a function answer.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_derive(AnswerFn)]
pub fn derive_answer_fn(_item: TokenStream) -> TokenStream {
    "fn answer() -> u32 { 42 }".parse().unwrap()
}

And then using said derive macro:

extern crate proc_macro_examples;
use proc_macro_examples::AnswerFn;

#[derive(AnswerFn)]
struct Struct;

fn main() {
    assert_eq!(42, answer());
}

Derive macro helper attributes

Derive macros can add additional attributes into the scope of the item they are on. Said attributes are called derive macro helper attributes. These attributes are inert, and their only purpose is to be fed into the derive macro that defined them. That said, they can be seen by all macros.

The way to define helper attributes is to put an attributes key in the proc_macro_derive macro with a comma separated list of identifiers that are the names of the helper attributes.

For example, the following derive macro defines a helper attribute helper, but ultimately doesn’t do anything with it.

#![crate_type="proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_derive(HelperAttr, attributes(helper))]
pub fn derive_helper_attr(_item: TokenStream) -> TokenStream {
    TokenStream::new()
}

And then usage on the derive macro on a struct:

#[derive(HelperAttr)]
struct Struct {
    #[helper] field: ()
}

Attribute macros

Attribute macros define new outer attributes which can be attached to items, including items in extern blocks, inherent and trait implementations, and trait definitions.

Attribute macros are defined by a public function with the proc_macro_attribute attribute that has a signature of (TokenStream, TokenStream) -> TokenStream. The first TokenStream is the delimited token tree following the attribute’s name, not including the outer delimiters. If the attribute is written as a bare attribute name, the attribute TokenStream is empty. The second TokenStream is the rest of the item including other attributes on the item. The returned TokenStream replaces the item with an arbitrary number of items. The proc_macro_attribute attribute defines the attribute in the macro namespace in the root of the crate.

For example, this attribute macro takes the input stream and returns it as is, effectively being the no-op of attributes.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_attribute]
pub fn return_as_is(_attr: TokenStream, item: TokenStream) -> TokenStream {
    item
}

This following example shows the stringified TokenStreams that the attribute macros see. The output will show in the output of the compiler. The output is shown in the comments after the function prefixed with “out:”.

// my-macro/src/lib.rs
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_attribute]
pub fn show_streams(attr: TokenStream, item: TokenStream) -> TokenStream {
    println!("attr: \"{attr}\"");
    println!("item: \"{item}\"");
    item
}
// src/lib.rs
extern crate my_macro;

use my_macro::show_streams;

// Example: Basic function
#[show_streams]
fn invoke1() {}
// out: attr: ""
// out: item: "fn invoke1() {}"

// Example: Attribute with input
#[show_streams(bar)]
fn invoke2() {}
// out: attr: "bar"
// out: item: "fn invoke2() {}"

// Example: Multiple tokens in the input
#[show_streams(multiple => tokens)]
fn invoke3() {}
// out: attr: "multiple => tokens"
// out: item: "fn invoke3() {}"

// Example:
#[show_streams { delimiters }]
fn invoke4() {}
// out: attr: "delimiters"
// out: item: "fn invoke4() {}"

Declarative macro tokens and procedural macro tokens

Declarative macro_rules macros and procedural macros use similar, but different definitions for tokens (or rather TokenTrees.)

Token trees in macro_rules (corresponding to tt matchers) are defined as

  • Delimited groups ((...), {...}, etc)
  • All operators supported by the language, both single-character and multi-character ones (+, +=).
    • Note that this set doesn’t include the single quote '.
  • Literals ("string", 1, etc)
    • Note that negation (e.g. -1) is never a part of such literal tokens, but a separate operator token.
  • Identifiers, including keywords (ident, r#ident, fn)
  • Lifetimes ('ident)
  • Metavariable substitutions in macro_rules (e.g. $my_expr in macro_rules! mac { ($my_expr: expr) => { $my_expr } } after the mac’s expansion, which will be considered a single token tree regardless of the passed expression)

Token trees in procedural macros are defined as

  • Delimited groups ((...), {...}, etc)
  • All punctuation characters used in operators supported by the language (+, but not +=), and also the single quote ' character (typically used in lifetimes, see below for lifetime splitting and joining behavior)
  • Literals ("string", 1, etc)
    • Negation (e.g. -1) is supported as a part of integer and floating point literals.
  • Identifiers, including keywords (ident, r#ident, fn)

Mismatches between these two definitions are accounted for when token streams are passed to and from procedural macros.
Note that the conversions below may happen lazily, so they might not happen if the tokens are not actually inspected.

When passed to a proc-macro

  • All multi-character operators are broken into single characters.
  • Lifetimes are broken into a ' character and an identifier.
  • All metavariable substitutions are represented as their underlying token streams.
    • Such token streams may be wrapped into delimited groups (Group) with implicit delimiters (Delimiter::None) when it’s necessary for preserving parsing priorities.
    • tt and ident substitutions are never wrapped into such groups and always represented as their underlying token trees.

When emitted from a proc macro

  • Punctuation characters are glued into multi-character operators when applicable.
  • Single quotes ' joined with identifiers are glued into lifetimes.
  • Negative literals are converted into two tokens (the - and the literal) possibly wrapped into a delimited group (Group) with implicit delimiters (Delimiter::None) when it’s necessary for preserving parsing priorities.

Note that neither declarative nor procedural macros support doc comment tokens (e.g. /// Doc), so they are always converted to token streams representing their equivalent #[doc = r"str"] attributes when passed to macros.

Crates and source files

Syntax
Crate :
   InnerAttribute*
   Item*

Note: Although Rust, like any other language, can be implemented by an interpreter as well as a compiler, the only existing implementation is a compiler, and the language has always been designed to be compiled. For these reasons, this section assumes a compiler.

Rust’s semantics obey a phase distinction between compile-time and run-time.1 Semantic rules that have a static interpretation govern the success or failure of compilation, while semantic rules that have a dynamic interpretation govern the behavior of the program at run-time.

The compilation model centers on artifacts called crates. Each compilation processes a single crate in source form, and if successful, produces a single crate in binary form: either an executable or some sort of library.2

A crate is a unit of compilation and linking, as well as versioning, distribution, and runtime loading. A crate contains a tree of nested module scopes. The top level of this tree is a module that is anonymous (from the point of view of paths within the module) and any item within a crate has a canonical module path denoting its location within the crate’s module tree.

The Rust compiler is always invoked with a single source file as input, and always produces a single output crate. The processing of that source file may result in other source files being loaded as modules. Source files have the extension .rs.

A Rust source file describes a module, the name and location of which — in the module tree of the current crate — are defined from outside the source file: either by an explicit Module item in a referencing source file, or by the name of the crate itself. Every source file is a module, but not every module needs its own source file: module definitions can be nested within one file.

Each source file contains a sequence of zero or more Item definitions, and may optionally begin with any number of attributes that apply to the containing module, most of which influence the behavior of the compiler. The anonymous crate module can have additional attributes that apply to the crate as a whole.

Note: The file’s contents may be preceded by a shebang.

#![allow(unused)]
fn main() {
// Specify the crate name.
#![crate_name = "projx"]

// Specify the type of output artifact.
#![crate_type = "lib"]

// Turn on a warning.
// This can be done in any module, not just the anonymous crate module.
#![warn(non_camel_case_types)]
}

Main Functions

A crate that contains a main function can be compiled to an executable. If a main function is present, it must take no arguments, must not declare any trait or lifetime bounds, must not have any where clauses, and its return type must implement the Termination trait.

fn main() {}
fn main() -> ! {
    std::process::exit(0);
}
fn main() -> impl std::process::Termination {
    std::process::ExitCode::SUCCESS
}

The main function may be an import, e.g. from an external crate or from the current one.

#![allow(unused)]
fn main() {
mod foo {
    pub fn bar() {
        println!("Hello, world!");
    }
}
use foo::bar as main;
}

Note: Types with implementations of Termination in the standard library include:

The no_main attribute

The no_main attribute may be applied at the crate level to disable emitting the main symbol for an executable binary. This is useful when some other object being linked to defines main.

The crate_name attribute

The crate_name attribute may be applied at the crate level to specify the name of the crate with the MetaNameValueStr syntax.

#![allow(unused)]
#![crate_name = "mycrate"]
fn main() {
}

The crate name must not be empty, and must only contain Unicode alphanumeric or _ (U+005F) characters.

1

This distinction would also exist in an interpreter. Static checks like syntactic analysis, type checking, and lints should happen before the program is executed regardless of when it is executed.

2

A crate is somewhat analogous to an assembly in the ECMA-335 CLI model, a library in the SML/NJ Compilation Manager, a unit in the Owens and Flatt module system, or a configuration in Mesa.

Conditional compilation

Syntax
ConfigurationPredicate :
      ConfigurationOption
   | ConfigurationAll
   | ConfigurationAny
   | ConfigurationNot

ConfigurationOption :
   IDENTIFIER (= (STRING_LITERAL | RAW_STRING_LITERAL))?

ConfigurationAll
   all ( ConfigurationPredicateList? )

ConfigurationAny
   any ( ConfigurationPredicateList? )

ConfigurationNot
   not ( ConfigurationPredicate )

ConfigurationPredicateList
   ConfigurationPredicate (, ConfigurationPredicate)* ,?

Conditionally compiled source code is source code that is compiled only under certain conditions. Source code can be made conditionally compiled using the cfg and cfg_attr attributes and the built-in cfg macro. Whether to compile can depend on the target architecture of the compiled crate, arbitrary values passed to the compiler, and other things further described below.

Each form of conditional compilation takes a configuration predicate that evaluates to true or false. The predicate is one of the following:

  • A configuration option. The predicate is true if the option is set, and false if it is unset.
  • all() with a comma-separated list of configuration predicates. It is true if all of the given predicates are true, or if the list is empty.
  • any() with a comma-separated list of configuration predicates. It is true if at least one of the given predicates is true. If there are no predicates, it is false.
  • not() with a configuration predicate. It is true if its predicate is false and false if its predicate is true.

Configuration options are either names or key-value pairs, and are either set or unset. Names are written as a single identifier, such as unix. Key-value pairs are written as an identifier, =, and then a string, such as target_arch = "x86_64".

Note: Whitespace around the = is ignored, so foo="bar" and foo = "bar" are equivalent.

Keys do not need to be unique. For example, both feature = "std" and feature = "serde" can be set at the same time.

Set Configuration Options

Which configuration options are set is determined statically during the compilation of the crate. Some options are compiler-set based on data about the compilation. Other options are arbitrarily-set based on input passed to the compiler outside of the code. It is not possible to set a configuration option from within the source code of the crate being compiled.

Note: For rustc, arbitrary-set configuration options are set using the --cfg flag.

Note: Configuration options with the key feature are a convention used by Cargo for specifying compile-time options and optional dependencies.

Warning: Arbitrarily-set configuration options can clash with compiler-set configuration options. For example, it is possible to do rustc --cfg "unix" program.rs while compiling to a Windows target, and have both unix and windows configuration options set at the same time. Doing this would be unwise.

target_arch

Key-value option set once with the target’s CPU architecture. The value is similar to the first element of the platform’s target triple, but not identical.

Example values:

  • "x86"
  • "x86_64"
  • "mips"
  • "powerpc"
  • "powerpc64"
  • "arm"
  • "aarch64"

target_feature

Key-value option set for each platform feature available for the current compilation target.

Example values:

  • "avx"
  • "avx2"
  • "crt-static"
  • "rdrand"
  • "sse"
  • "sse2"
  • "sse4.1"

See the target_feature attribute for more details on the available features. An additional feature of crt-static is available to the target_feature option to indicate that a static C runtime is available.

target_os

Key-value option set once with the target’s operating system. This value is similar to the second and third element of the platform’s target triple.

Example values:

  • "windows"
  • "macos"
  • "ios"
  • "linux"
  • "android"
  • "freebsd"
  • "dragonfly"
  • "openbsd"
  • "netbsd"
  • "none" (typical for embedded targets)

target_family

Key-value option providing a more generic description of a target, such as the family of the operating systems or architectures that the target generally falls into. Any number of target_family key-value pairs can be set.

Example values:

  • "unix"
  • "windows"
  • "wasm"
  • Both "unix" and "wasm"

unix and windows

unix is set if target_family = "unix" is set and windows is set if target_family = "windows" is set.

target_env

Key-value option set with further disambiguating information about the target platform with information about the ABI or libc used. For historical reasons, this value is only defined as not the empty-string when actually needed for disambiguation. Thus, for example, on many GNU platforms, this value will be empty. This value is similar to the fourth element of the platform’s target triple. One difference is that embedded ABIs such as gnueabihf will simply define target_env as "gnu".

Example values:

  • ""
  • "gnu"
  • "msvc"
  • "musl"
  • "sgx"

target_abi

Key-value option set to further disambiguate the target_env with information about the target ABI. For historical reasons, this value is only defined as not the empty-string when actually needed for disambiguation. Thus, for example, on many GNU platforms, this value will be empty.

Example values:

  • ""
  • "llvm"
  • "eabihf"
  • "abi64"
  • "sim"
  • "macabi"

target_endian

Key-value option set once with either a value of “little” or “big” depending on the endianness of the target’s CPU.

target_pointer_width

Key-value option set once with the target’s pointer width in bits.

Example values:

  • "16"
  • "32"
  • "64"

target_vendor

Key-value option set once with the vendor of the target.

Example values:

  • "apple"
  • "fortanix"
  • "pc"
  • "unknown"

target_has_atomic

Key-value option set for each bit width that the target supports atomic loads, stores, and compare-and-swap operations.

When this cfg is present, all of the stable core::sync::atomic APIs are available for the relevant atomic width.

Possible values:

  • "8"
  • "16"
  • "32"
  • "64"
  • "128"
  • "ptr"

test

Enabled when compiling the test harness. Done with rustc by using the --test flag. See Testing for more on testing support.

debug_assertions

Enabled by default when compiling without optimizations. This can be used to enable extra debugging code in development but not in production. For example, it controls the behavior of the standard library’s debug_assert! macro.

proc_macro

Set when the crate being compiled is being compiled with the proc_macro crate type.

panic

Key-value option set depending on the panic strategy. Note that more values may be added in the future.

Example values:

  • "abort"
  • "unwind"

Forms of conditional compilation

The cfg attribute

Syntax
CfgAttrAttribute :
   cfg ( ConfigurationPredicate )

The cfg attribute conditionally includes the thing it is attached to based on a configuration predicate.

It is written as cfg, (, a configuration predicate, and finally ).

If the predicate is true, the thing is rewritten to not have the cfg attribute on it. If the predicate is false, the thing is removed from the source code.

When a crate-level cfg has a false predicate, the behavior is slightly different: any crate attributes preceding the cfg are kept, and any crate attributes following the cfg are removed. This allows #![no_std] and #![no_core] crates to avoid linking std/core even if a #![cfg(...)] has removed the entire crate.

Some examples on functions:

#![allow(unused)]
fn main() {
// The function is only included in the build when compiling for macOS
#[cfg(target_os = "macos")]
fn macos_only() {
  // ...
}

// This function is only included when either foo or bar is defined
#[cfg(any(foo, bar))]
fn needs_foo_or_bar() {
  // ...
}

// This function is only included when compiling for a unixish OS with a 32-bit
// architecture
#[cfg(all(unix, target_pointer_width = "32"))]
fn on_32bit_unix() {
  // ...
}

// This function is only included when foo is not defined
#[cfg(not(foo))]
fn needs_not_foo() {
  // ...
}

// This function is only included when the panic strategy is set to unwind
#[cfg(panic = "unwind")]
fn when_unwinding() {
  // ...
}

}

The cfg attribute is allowed anywhere attributes are allowed.

The cfg_attr attribute

Syntax
CfgAttrAttribute :
   cfg_attr ( ConfigurationPredicate , CfgAttrs? )

CfgAttrs :
   Attr (, Attr)* ,?

The cfg_attr attribute conditionally includes attributes based on a configuration predicate.

When the configuration predicate is true, this attribute expands out to the attributes listed after the predicate. For example, the following module will either be found at linux.rs or windows.rs based on the target.

#[cfg_attr(target_os = "linux", path = "linux.rs")]
#[cfg_attr(windows, path = "windows.rs")]
mod os;

Zero, one, or more attributes may be listed. Multiple attributes will each be expanded into separate attributes. For example:

#[cfg_attr(feature = "magic", sparkles, crackles)]
fn bewitched() {}

// When the `magic` feature flag is enabled, the above will expand to:
#[sparkles]
#[crackles]
fn bewitched() {}

Note: The cfg_attr can expand to another cfg_attr. For example, #[cfg_attr(target_os = "linux", cfg_attr(feature = "multithreaded", some_other_attribute))] is valid. This example would be equivalent to #[cfg_attr(all(target_os = "linux", feature ="multithreaded"), some_other_attribute)].

The cfg_attr attribute is allowed anywhere attributes are allowed.

The cfg macro

The built-in cfg macro takes in a single configuration predicate and evaluates to the true literal when the predicate is true and the false literal when it is false.

For example:

#![allow(unused)]
fn main() {
let machine_kind = if cfg!(unix) {
  "unix"
} else if cfg!(windows) {
  "windows"
} else {
  "unknown"
};

println!("I'm running on a {} machine!", machine_kind);
}

Items

Syntax:
Item:
   OuterAttribute*
      VisItem
   | MacroItem

VisItem:
   Visibility?
   (
         Module
      | ExternCrate
      | UseDeclaration
      | Function
      | TypeAlias
      | Struct
      | Enumeration
      | Union
      | ConstantItem
      | StaticItem
      | Trait
      | Implementation
      | ExternBlock
   )

MacroItem:
      MacroInvocationSemi
   | MacroRulesDefinition

An item is a component of a crate. Items are organized within a crate by a nested set of modules. Every crate has a single “outermost” anonymous module; all further items within the crate have paths within the module tree of the crate.

Items are entirely determined at compile-time, generally remain fixed during execution, and may reside in read-only memory.

There are several kinds of items:

Items may be declared in the root of the crate, a module, or a block expression. A subset of items, called associated items, may be declared in traits and implementations. A subset of items, called external items, may be declared in extern blocks.

Items may be defined in any order, with the exception of macro_rules which has its own scoping behavior. Name resolution of item names allows items to be defined before or after where the item is referred to in the module or block.

See item scopes for information on the scoping rules of items.

Modules

Syntax:
Module :
      unsafe? mod IDENTIFIER ;
   | unsafe? mod IDENTIFIER {
        InnerAttribute*
        Item*
      }

A module is a container for zero or more items.

A module item is a module, surrounded in braces, named, and prefixed with the keyword mod. A module item introduces a new, named module into the tree of modules making up a crate. Modules can nest arbitrarily.

An example of a module:

#![allow(unused)]
fn main() {
mod math {
    type Complex = (f64, f64);
    fn sin(f: f64) -> f64 {
        /* ... */
      unimplemented!();
    }
    fn cos(f: f64) -> f64 {
        /* ... */
      unimplemented!();
    }
    fn tan(f: f64) -> f64 {
        /* ... */
      unimplemented!();
    }
}
}

Modules are defined in the type namespace of the module or block where they are located. It is an error to define multiple items with the same name in the same namespace within a module. See the scopes chapter for more details on restrictions and shadowing behavior.

The unsafe keyword is syntactically allowed to appear before the mod keyword, but it is rejected at a semantic level. This allows macros to consume the syntax and make use of the unsafe keyword, before removing it from the token stream.

Module Source Filenames

A module without a body is loaded from an external file. When the module does not have a path attribute, the path to the file mirrors the logical module path. Ancestor module path components are directories, and the module’s contents are in a file with the name of the module plus the .rs extension. For example, the following module structure can have this corresponding filesystem structure:

Module PathFilesystem PathFile Contents
cratelib.rsmod util;
crate::utilutil.rsmod config;
crate::util::configutil/config.rs

Module filenames may also be the name of the module as a directory with the contents in a file named mod.rs within that directory. The above example can alternately be expressed with crate::util’s contents in a file named util/mod.rs. It is not allowed to have both util.rs and util/mod.rs.

Note: Prior to rustc 1.30, using mod.rs files was the way to load a module with nested children. It is encouraged to use the new naming convention as it is more consistent, and avoids having many files named mod.rs within a project.

The path attribute

The directories and files used for loading external file modules can be influenced with the path attribute.

For path attributes on modules not inside inline module blocks, the file path is relative to the directory the source file is located. For example, the following code snippet would use the paths shown based on where it is located:

#[path = "foo.rs"]
mod c;
Source Filec’s File Locationc’s Module Path
src/a/b.rssrc/a/foo.rscrate::a::b::c
src/a/mod.rssrc/a/foo.rscrate::a::c

For path attributes inside inline module blocks, the relative location of the file path depends on the kind of source file the path attribute is located in. “mod-rs” source files are root modules (such as lib.rs or main.rs) and modules with files named mod.rs. “non-mod-rs” source files are all other module files. Paths for path attributes inside inline module blocks in a mod-rs file are relative to the directory of the mod-rs file including the inline module components as directories. For non-mod-rs files, it is the same except the path starts with a directory with the name of the non-mod-rs module. For example, the following code snippet would use the paths shown based on where it is located:

mod inline {
    #[path = "other.rs"]
    mod inner;
}
Source Fileinner’s File Locationinner’s Module Path
src/a/b.rssrc/a/b/inline/other.rscrate::a::b::inline::inner
src/a/mod.rssrc/a/inline/other.rscrate::a::inline::inner

An example of combining the above rules of path attributes on inline modules and nested modules within (applies to both mod-rs and non-mod-rs files):

#[path = "thread_files"]
mod thread {
    // Load the `local_data` module from `thread_files/tls.rs` relative to
    // this source file's directory.
    #[path = "tls.rs"]
    mod local_data;
}

Attributes on Modules

Modules, like all items, accept outer attributes. They also accept inner attributes: either after { for a module with a body, or at the beginning of the source file, after the optional BOM and shebang.

The built-in attributes that have meaning on a module are cfg, deprecated, doc, the lint check attributes, path, and no_implicit_prelude. Modules also accept macro attributes.

Extern crate declarations

Syntax:
ExternCrate :
   extern crate CrateRef AsClause? ;

CrateRef :
   IDENTIFIER | self

AsClause :
   as ( IDENTIFIER | _ )

An extern crate declaration specifies a dependency on an external crate. The external crate is then bound into the declaring scope as the given identifier in the type namespace. Additionally, if the extern crate appears in the crate root, then the crate name is also added to the extern prelude, making it automatically in scope in all modules. The as clause can be used to bind the imported crate to a different name.

The external crate is resolved to a specific soname at compile time, and a runtime linkage requirement to that soname is passed to the linker for loading at runtime. The soname is resolved at compile time by scanning the compiler’s library path and matching the optional crate_name provided against the crate_name attributes that were declared on the external crate when it was compiled. If no crate_name is provided, a default name attribute is assumed, equal to the identifier given in the extern crate declaration.

The self crate may be imported which creates a binding to the current crate. In this case the as clause must be used to specify the name to bind it to.

Three examples of extern crate declarations:

extern crate pcre;

extern crate std; // equivalent to: extern crate std as std;

extern crate std as ruststd; // linking to 'std' under another name

When naming Rust crates, hyphens are disallowed. However, Cargo packages may make use of them. In such case, when Cargo.toml doesn’t specify a crate name, Cargo will transparently replace - with _ (Refer to RFC 940 for more details).

Here is an example:

// Importing the Cargo package hello-world
extern crate hello_world; // hyphen replaced with an underscore

Underscore Imports

An external crate dependency can be declared without binding its name in scope by using an underscore with the form extern crate foo as _. This may be useful for crates that only need to be linked, but are never referenced, and will avoid being reported as unused.

The macro_use attribute works as usual and imports the macro names into the macro_use prelude.

The no_link attribute may be specified on an extern crate item to prevent linking the crate into the output. This is commonly used to load a crate to access only its macros.

Use declarations

Syntax:
UseDeclaration :
   use UseTree ;

UseTree :
      (SimplePath? ::)? *
   | (SimplePath? ::)? { (UseTree ( , UseTree )* ,?)? }
   | SimplePath ( as ( IDENTIFIER | _ ) )?

A use declaration creates one or more local name bindings synonymous with some other path. Usually a use declaration is used to shorten the path required to refer to a module item. These declarations may appear in modules and blocks, usually at the top. A use declaration is also sometimes called an import, or, if it is public, a re-export.

Use declarations support a number of convenient shortcuts:

  • Simultaneously binding a list of paths with a common prefix, using the brace syntax use a::b::{c, d, e::f, g::h::i};
  • Simultaneously binding a list of paths with a common prefix and their common parent module, using the self keyword, such as use a::b::{self, c, d::e};
  • Rebinding the target name as a new local name, using the syntax use p::q::r as x;. This can also be used with the last two features: use a::b::{self as ab, c as abc}.
  • Binding all paths matching a given prefix, using the asterisk wildcard syntax use a::b::*;.
  • Nesting groups of the previous features multiple times, such as use a::b::{self as ab, c, d::{*, e::f}};

An example of use declarations:

use std::collections::hash_map::{self, HashMap};

fn foo<T>(_: T){}
fn bar(map1: HashMap<String, usize>, map2: hash_map::HashMap<String, usize>){}

fn main() {
    // use declarations can also exist inside of functions
    use std::option::Option::{Some, None};

    // Equivalent to 'foo(vec![std::option::Option::Some(1.0f64),
    // std::option::Option::None]);'
    foo(vec![Some(1.0f64), None]);

    // Both `hash_map` and `HashMap` are in scope.
    let map1 = HashMap::new();
    let map2 = hash_map::HashMap::new();
    bar(map1, map2);
}

use Visibility

Like items, use declarations are private to the containing module, by default. Also like items, a use declaration can be public, if qualified by the pub keyword. Such a use declaration serves to re-export a name. A public use declaration can therefore redirect some public name to a different target definition: even a definition with a private canonical path, inside a different module. If a sequence of such redirections form a cycle or cannot be resolved unambiguously, they represent a compile-time error.

An example of re-exporting:

mod quux {
    pub use self::foo::{bar, baz};
    pub mod foo {
        pub fn bar() {}
        pub fn baz() {}
    }
}

fn main() {
    quux::bar();
    quux::baz();
}

In this example, the module quux re-exports two public names defined in foo.

use Paths

The paths that are allowed in a use item follow the SimplePath grammar and are similar to the paths that may be used in an expression. They may create bindings for:

They cannot import associated items, generic parameters, local variables, paths with Self, or tool attributes. More restrictions are described below.

use will create bindings for all namespaces from the imported entities, with the exception that a self import will only import from the type namespace (as described below). For example, the following illustrates creating bindings for the same name in two namespaces:

#![allow(unused)]
fn main() {
mod stuff {
    pub struct Foo(pub i32);
}

// Imports the `Foo` type and the `Foo` constructor.
use stuff::Foo;

fn example() {
    let ctor = Foo; // Uses `Foo` from the value namespace.
    let x: Foo = ctor(123); // Uses `Foo` From the type namespace.
}
}

Edition differences: In the 2015 edition, use paths are relative to the crate root. For example:

mod foo {
    pub mod example { pub mod iter {} }
    pub mod baz { pub fn foobaz() {} }
}
mod bar {
    // Resolves `foo` from the crate root.
    use foo::example::iter;
    // The `::` prefix explicitly resolves `foo`
    // from the crate root.
    use ::foo::baz::foobaz;
}

fn main() {}

The 2015 edition does not allow use declarations to reference the extern prelude. Thus, extern crate declarations are still required in 2015 to reference an external crate in a use declaration. Beginning with the 2018 edition, use declarations can specify an external crate dependency the same way extern crate can.

as renames

The as keyword can be used to change the name of an imported entity. For example:

#![allow(unused)]
fn main() {
// Creates a non-public alias `bar` for the function `foo`.
use inner::foo as bar;

mod inner {
    pub fn foo() {}
}
}

Brace syntax

Braces can be used in the last segment of the path to import multiple entities from the previous segment, or, if there are no previous segments, from the current scope. Braces can be nested, creating a tree of paths, where each grouping of segments is logically combined with its parent to create a full path.

#![allow(unused)]
fn main() {
// Creates bindings to:
// - `std::collections::BTreeSet`
// - `std::collections::hash_map`
// - `std::collections::hash_map::HashMap`
use std::collections::{BTreeSet, hash_map::{self, HashMap}};
}

An empty brace does not import anything, though the leading path is validated that it is accessible.

Edition differences: In the 2015 edition, paths are relative to the crate root, so an import such as use {foo, bar}; will import the names foo and bar from the crate root, whereas starting in 2018, those names are relative to the current scope.

self imports

The keyword self may be used within brace syntax to create a binding of the parent entity under its own name.

mod stuff {
    pub fn foo() {}
    pub fn bar() {}
}
mod example {
    // Creates a binding for `stuff` and `foo`.
    use crate::stuff::{self, foo};
    pub fn baz() {
        foo();
        stuff::bar();
    }
}
fn main() {}

self only creates a binding from the type namespace of the parent entity. For example, in the following, only the foo mod is imported:

mod bar {
    pub mod foo {}
    pub fn foo() {}
}

// This only imports the module `foo`. The function `foo` lives in
// the value namespace and is not imported.
use bar::foo::{self};

fn main() {
    foo(); //~ ERROR `foo` is a module
}

Note: self may also be used as the first segment of a path. The usage of self as the first segment and inside a use brace is logically the same; it means the current module of the parent segment, or the current module if there is no parent segment. See self in the paths chapter for more information on the meaning of a leading self.

Glob imports

The * character may be used as the last segment of a use path to import all importable entities from the entity of the preceding segment. For example:

#![allow(unused)]
fn main() {
// Creates a non-public alias to `bar`.
use foo::*;

mod foo {
    fn i_am_private() {}
    enum Example {
        V1,
        V2,
    }
    pub fn bar() {
        // Creates local aliases to `V1` and `V2`
        // of the `Example` enum.
        use Example::*;
        let x = V1;
    }
}
}

Items and named imports are allowed to shadow names from glob imports in the same namespace. That is, if there is a name already defined by another item in the same namespace, the glob import will be shadowed. For example:

#![allow(unused)]
fn main() {
// This creates a binding to the `clashing::Foo` tuple struct
// constructor, but does not import its type because that would
// conflict with the `Foo` struct defined here.
//
// Note that the order of definition here is unimportant.
use clashing::*;
struct Foo {
    field: f32,
}

fn do_stuff() {
    // Uses the constructor from `clashing::Foo`.
    let f1 = Foo(123);
    // The struct expression uses the type from
    // the `Foo` struct defined above.
    let f2 = Foo { field: 1.0 };
    // `Bar` is also in scope due to the glob import.
    let z = Bar {};
}

mod clashing {
    pub struct Foo(pub i32);
    pub struct Bar {}
}
}

* cannot be used as the first or intermediate segments. * cannot be used to import a module’s contents into itself (such as use self::*;).

Edition differences: In the 2015 edition, paths are relative to the crate root, so an import such as use *; is valid, and it means to import everything from the crate root. This cannot be used in the crate root itself.

Underscore Imports

Items can be imported without binding to a name by using an underscore with the form use path as _. This is particularly useful to import a trait so that its methods may be used without importing the trait’s symbol, for example if the trait’s symbol may conflict with another symbol. Another example is to link an external crate without importing its name.

Asterisk glob imports will import items imported with _ in their unnameable form.

mod foo {
    pub trait Zoo {
        fn zoo(&self) {}
    }

    impl<T> Zoo for T {}
}

use self::foo::Zoo as _;
struct Zoo;  // Underscore import avoids name conflict with this item.

fn main() {
    let z = Zoo;
    z.zoo();
}

The unique, unnameable symbols are created after macro expansion so that macros may safely emit multiple references to _ imports. For example, the following should not produce an error:

#![allow(unused)]
fn main() {
macro_rules! m {
    ($item: item) => { $item $item }
}

m!(use std as _;);
// This expands to:
// use std as _;
// use std as _;
}

Restrictions

The following are restrictions for valid use declarations:

  • use crate; must use as to define the name to which to bind the crate root.
  • use {self}; is an error; there must be a leading segment when using self.
  • As with any item definition, use imports cannot create duplicate bindings of the same name in the same namespace in a module or block.
  • use paths with $crate are not allowed in a macro_rules expansion.
  • use paths cannot refer to enum variants through a type alias. For example:
    #![allow(unused)]
    fn main() {
    enum MyEnum {
        MyVariant
    }
    type TypeAlias = MyEnum;
    
    use MyEnum::MyVariant; //~ OK
    use TypeAlias::MyVariant; //~ ERROR
    }

Ambiguities

Note: This section is incomplete.

Some situations are an error when there is an ambiguity as to which name a use declaration refers. This happens when there are two name candidates that do not resolve to the same entity.

Glob imports are allowed to import conflicting names in the same namespace as long as the name is not used. For example:

mod foo {
    pub struct Qux;
}

mod bar {
    pub struct Qux;
}

use foo::*;
use bar::*; //~ OK, no name conflict.

fn main() {
    // This would be an error, due to the ambiguity.
    //let x = Qux;
}

Multiple glob imports are allowed to import the same name, and that name is allowed to be used, if the imports are of the same item (following re-exports). The visibility of the name is the maximum visibility of the imports. For example:

mod foo {
    pub struct Qux;
}

mod bar {
    pub use super::foo::Qux;
}

// These both import the same `Qux`. The visibility of `Qux`
// is `pub` because that is the maximum visibility between
// these two `use` declarations.
pub use bar::*;
use foo::*;

fn main() {
    let _: Qux = Qux;
}

Functions

Syntax
Function :
   FunctionQualifiers fn IDENTIFIER GenericParams?
      ( FunctionParameters? )
      FunctionReturnType? WhereClause?
      ( BlockExpression | ; )

FunctionQualifiers :
   const? async1? ItemSafety? (extern Abi?)?

ItemSafety :
   safe2 | unsafe

Abi :
   STRING_LITERAL | RAW_STRING_LITERAL

FunctionParameters :
      SelfParam ,?
   | (SelfParam ,)? FunctionParam (, FunctionParam)* ,?

SelfParam :
   OuterAttribute* ( ShorthandSelf | TypedSelf )

ShorthandSelf :
   (& | & Lifetime)? mut? self

TypedSelf :
   mut? self : Type

FunctionParam :
   OuterAttribute* ( FunctionParamPattern | ... | Type 3 )

FunctionParamPattern :
   PatternNoTopAlt : ( Type | ... )

FunctionReturnType :
   -> Type

1

The async qualifier is not allowed in the 2015 edition.

2

The safe function qualifier is only allowed semantically within extern blocks.

3

Function parameters with only a type are only allowed in an associated function of a trait item in the 2015 edition.

A function consists of a block (that’s the body of the function), along with a name, a set of parameters, and an output type. Other than a name, all these are optional. Functions are declared with the keyword fn which defines the given name in the value namespace of the module or block where it is located. Functions may declare a set of input variables as parameters, through which the caller passes arguments into the function, and the output type of the value the function will return to its caller on completion. If the output type is not explicitly stated, it is the unit type.

When referred to, a function yields a first-class value of the corresponding zero-sized function item type, which when called evaluates to a direct call to the function.

For example, this is a simple function:

#![allow(unused)]
fn main() {
fn answer_to_life_the_universe_and_everything() -> i32 {
    return 42;
}
}

The safe function is semantically only allowed when used in an extern block.

Function parameters

Function parameters are irrefutable patterns, so any pattern that is valid in an else-less let binding is also valid as a parameter:

#![allow(unused)]
fn main() {
fn first((value, _): (i32, i32)) -> i32 { value }
}

If the first parameter is a SelfParam, this indicates that the function is a method. Functions with a self parameter may only appear as an associated function in a trait or implementation.

A parameter with the ... token indicates a variadic function, and may only be used as the last parameter of an external block function. The variadic parameter may have an optional identifier, such as args: ....

Function body

The body block of a function is conceptually wrapped in another block that first binds the argument patterns and then returns the value of the function’s body. This means that the tail expression of the block, if evaluated, ends up being returned to the caller. As usual, an explicit return expression within the body of the function will short-cut that implicit return, if reached.

For example, the function above behaves as if it was written as:

// argument_0 is the actual first argument passed from the caller
let (value, _) = argument_0;
return {
    value
};

Functions without a body block are terminated with a semicolon. This form may only appear in a trait or external block.

Generic functions

A generic function allows one or more parameterized types to appear in its signature. Each type parameter must be explicitly declared in an angle-bracket-enclosed and comma-separated list, following the function name.

#![allow(unused)]
fn main() {
// foo is generic over A and B

fn foo<A, B>(x: A, y: B) {
}
}

Inside the function signature and body, the name of the type parameter can be used as a type name. Trait bounds can be specified for type parameters to allow methods with that trait to be called on values of that type. This is specified using the where syntax:

#![allow(unused)]
fn main() {
use std::fmt::Debug;
fn foo<T>(x: T) where T: Debug {
}
}

When a generic function is referenced, its type is instantiated based on the context of the reference. For example, calling the foo function here:

#![allow(unused)]
fn main() {
use std::fmt::Debug;

fn foo<T>(x: &[T]) where T: Debug {
    // details elided
}

foo(&[1, 2]);
}

will instantiate type parameter T with i32.

The type parameters can also be explicitly supplied in a trailing path component after the function name. This might be necessary if there is not sufficient context to determine the type parameters. For example, mem::size_of::<u32>() == 4.

Extern function qualifier

The extern function qualifier allows providing function definitions that can be called with a particular ABI:

extern "ABI" fn foo() { /* ... */ }

These are often used in combination with external block items which provide function declarations that can be used to call functions without providing their definition:

unsafe extern "ABI" {
  unsafe fn foo(); /* no body */
  safe fn bar(); /* no body */
}
unsafe { foo() };
bar();

When "extern" Abi?* is omitted from FunctionQualifiers in function items, the ABI "Rust" is assigned. For example:

#![allow(unused)]
fn main() {
fn foo() {}
}

is equivalent to:

#![allow(unused)]
fn main() {
extern "Rust" fn foo() {}
}

Functions can be called by foreign code, and using an ABI that differs from Rust allows, for example, to provide functions that can be called from other programming languages like C:

#![allow(unused)]
fn main() {
// Declares a function with the "C" ABI
extern "C" fn new_i32() -> i32 { 0 }

// Declares a function with the "stdcall" ABI
#[cfg(target_arch = "x86_64")]
extern "stdcall" fn new_i32_stdcall() -> i32 { 0 }
}

Just as with external block, when the extern keyword is used and the "ABI" is omitted, the ABI used defaults to "C". That is, this:

#![allow(unused)]
fn main() {
extern fn new_i32() -> i32 { 0 }
let fptr: extern fn() -> i32 = new_i32;
}

is equivalent to:

#![allow(unused)]
fn main() {
extern "C" fn new_i32() -> i32 { 0 }
let fptr: extern "C" fn() -> i32 = new_i32;
}

Functions with an ABI that differs from "Rust" do not support unwinding in the exact same way that Rust does. Therefore, unwinding past the end of functions with such ABIs causes the process to abort.

Note: The LLVM backend of the rustc implementation aborts the process by executing an illegal instruction.

Const functions

Functions qualified with the const keyword are const functions, as are tuple struct and tuple variant constructors. Const functions can be called from within const contexts.

Const functions may use the extern function qualifier, but only with the "Rust" and "C" ABIs.

Const functions are not allowed to be async.

Async functions

Functions may be qualified as async, and this can also be combined with the unsafe qualifier:

#![allow(unused)]
fn main() {
async fn regular_example() { }
async unsafe fn unsafe_example() { }
}

Async functions do no work when called: instead, they capture their arguments into a future. When polled, that future will execute the function’s body.

An async function is roughly equivalent to a function that returns impl Future and with an async move block as its body:

#![allow(unused)]
fn main() {
// Source
async fn example(x: &str) -> usize {
    x.len()
}
}

is roughly equivalent to:

#![allow(unused)]
fn main() {
use std::future::Future;
// Desugared
fn example<'a>(x: &'a str) -> impl Future<Output = usize> + 'a {
    async move { x.len() }
}
}

The actual desugaring is more complex:

  • The return type in the desugaring is assumed to capture all lifetime parameters from the async fn declaration. This can be seen in the desugared example above, which explicitly outlives, and hence captures, 'a.
  • The async move block in the body captures all function parameters, including those that are unused or bound to a _ pattern. This ensures that function parameters are dropped in the same order as they would be if the function were not async, except that the drop occurs when the returned future has been fully awaited.

For more information on the effect of async, see async blocks.

Edition differences: Async functions are only available beginning with Rust 2018.

Combining async and unsafe

It is legal to declare a function that is both async and unsafe. The resulting function is unsafe to call and (like any async function) returns a future. This future is just an ordinary future and thus an unsafe context is not required to “await” it:

#![allow(unused)]
fn main() {
// Returns a future that, when awaited, dereferences `x`.
//
// Soundness condition: `x` must be safe to dereference until
// the resulting future is complete.
async unsafe fn unsafe_example(x: *const i32) -> i32 {
  *x
}

async fn safe_example() {
    // An `unsafe` block is required to invoke the function initially:
    let p = 22;
    let future = unsafe { unsafe_example(&p) };

    // But no `unsafe` block required here. This will
    // read the value of `p`:
    let q = future.await;
}
}

Note that this behavior is a consequence of the desugaring to a function that returns an impl Future – in this case, the function we desugar to is an unsafe function, but the return value remains the same.

Unsafe is used on an async function in precisely the same way that it is used on other functions: it indicates that the function imposes some additional obligations on its caller to ensure soundness. As in any other unsafe function, these conditions may extend beyond the initial call itself – in the snippet above, for example, the unsafe_example function took a pointer x as argument, and then (when awaited) dereferenced that pointer. This implies that x would have to be valid until the future is finished executing, and it is the caller’s responsibility to ensure that.

Attributes on functions

Outer attributes are allowed on functions. Inner attributes are allowed directly after the { inside its body block.

This example shows an inner attribute on a function. The function is documented with just the word “Example”.

#![allow(unused)]
fn main() {
fn documented() {
    #![doc = "Example"]
}
}

Note: Except for lints, it is idiomatic to only use outer attributes on function items.

The attributes that have meaning on a function are cfg, cfg_attr, deprecated, doc, export_name, link_section, no_mangle, the lint check attributes, must_use, the procedural macro attributes, the testing attributes, and the optimization hint attributes. Functions also accept attributes macros.

Attributes on function parameters

Outer attributes are allowed on function parameters and the permitted built-in attributes are restricted to cfg, cfg_attr, allow, warn, deny, and forbid.

#![allow(unused)]
fn main() {
fn len(
    #[cfg(windows)] slice: &[u16],
    #[cfg(not(windows))] slice: &[u8],
) -> usize {
    slice.len()
}
}

Inert helper attributes used by procedural macro attributes applied to items are also allowed but be careful to not include these inert attributes in your final TokenStream.

For example, the following code defines an inert some_inert_attribute attribute that is not formally defined anywhere and the some_proc_macro_attribute procedural macro is responsible for detecting its presence and removing it from the output token stream.

#[some_proc_macro_attribute]
fn foo_oof(#[some_inert_attribute] arg: u8) {
}

Type aliases

Syntax
TypeAlias :
   type IDENTIFIER GenericParams? ( : TypeParamBounds )? WhereClause? ( = Type WhereClause?)? ;

A type alias defines a new name for an existing type in the type namespace of the module or block where it is located. Type aliases are declared with the keyword type. Every value has a single, specific type, but may implement several different traits, and may be compatible with several different type constraints.

For example, the following defines the type Point as a synonym for the type (u8, u8), the type of pairs of unsigned 8 bit integers:

#![allow(unused)]
fn main() {
type Point = (u8, u8);
let p: Point = (41, 68);
}

A type alias to a tuple-struct or unit-struct cannot be used to qualify that type’s constructor:

#![allow(unused)]
fn main() {
struct MyStruct(u32);

use MyStruct as UseAlias;
type TypeAlias = MyStruct;

let _ = UseAlias(5); // OK
let _ = TypeAlias(5); // Doesn't work
}

A type alias, when not used as an associated type, must include a Type and may not include TypeParamBounds.

A type alias, when used as an associated type in a trait, must not include a Type specification but may include TypeParamBounds.

A type alias, when used as an associated type in a trait impl, must include a Type specification and may not include TypeParamBounds.

Where clauses before the equals sign on a type alias in a trait impl (like type TypeAlias<T> where T: Foo = Bar<T>) are deprecated. Where clauses after the equals sign (like type TypeAlias<T> = Bar<T> where T: Foo) are preferred.

Structs

Syntax
Struct :
      StructStruct
   | TupleStruct

StructStruct :
   struct IDENTIFIER  GenericParams? WhereClause? ( { StructFields? } | ; )

TupleStruct :
   struct IDENTIFIER  GenericParams? ( TupleFields? ) WhereClause? ;

StructFields :
   StructField (, StructField)* ,?

StructField :
   OuterAttribute*
   Visibility?
   IDENTIFIER : Type

TupleFields :
   TupleField (, TupleField)* ,?

TupleField :
   OuterAttribute*
   Visibility?
   Type

A struct is a nominal struct type defined with the keyword struct. A struct declaration defines the given name in the type namespace of the module or block where it is located.

An example of a struct item and its use:

#![allow(unused)]
fn main() {
struct Point {x: i32, y: i32}
let p = Point {x: 10, y: 11};
let px: i32 = p.x;
}

A tuple struct is a nominal tuple type, and is also defined with the keyword struct. In addition to defining a type, it also defines a constructor of the same name in the value namespace. The constructor is a function which can be called to create a new instance of the struct. For example:

#![allow(unused)]
fn main() {
struct Point(i32, i32);
let p = Point(10, 11);
let px: i32 = match p { Point(x, _) => x };
}

A unit-like struct is a struct without any fields, defined by leaving off the list of fields entirely. Such a struct implicitly defines a constant of its type with the same name. For example:

#![allow(unused)]
fn main() {
struct Cookie;
let c = [Cookie, Cookie {}, Cookie, Cookie {}];
}

is equivalent to

#![allow(unused)]
fn main() {
struct Cookie {}
const Cookie: Cookie = Cookie {};
let c = [Cookie, Cookie {}, Cookie, Cookie {}];
}

The precise memory layout of a struct is not specified. One can specify a particular layout using the repr attribute.

Enumerations

Syntax
Enumeration :
   enum IDENTIFIER  GenericParams? WhereClause? { EnumItems? }

EnumItems :
   EnumItem ( , EnumItem )* ,?

EnumItem :
   OuterAttribute* Visibility?
   IDENTIFIER ( EnumItemTuple | EnumItemStruct )? EnumItemDiscriminant?

EnumItemTuple :
   ( TupleFields? )

EnumItemStruct :
   { StructFields? }

EnumItemDiscriminant :
   = Expression

An enumeration, also referred to as an enum, is a simultaneous definition of a nominal enumerated type as well as a set of constructors, that can be used to create or pattern-match values of the corresponding enumerated type.

Enumerations are declared with the keyword enum. The enum declaration defines the enumeration type in the type namespace of the module or block where it is located.

An example of an enum item and its use:

#![allow(unused)]
fn main() {
enum Animal {
    Dog,
    Cat,
}

let mut a: Animal = Animal::Dog;
a = Animal::Cat;
}

Enum constructors can have either named or unnamed fields:

#![allow(unused)]
fn main() {
enum Animal {
    Dog(String, f64),
    Cat { name: String, weight: f64 },
}

let mut a: Animal = Animal::Dog("Cocoa".to_string(), 37.2);
a = Animal::Cat { name: "Spotty".to_string(), weight: 2.7 };
}

In this example, Cat is a struct-like enum variant, whereas Dog is simply called an enum variant.

An enum where no constructors contain fields are called a field-less enum. For example, this is a fieldless enum:

#![allow(unused)]
fn main() {
enum Fieldless {
    Tuple(),
    Struct{},
    Unit,
}
}

If a field-less enum only contains unit variants, the enum is called an unit-only enum. For example:

#![allow(unused)]
fn main() {
enum Enum {
    Foo = 3,
    Bar = 2,
    Baz = 1,
}
}

Variant constructors are similar to struct definitions, and can be referenced by a path from the enumeration name, including in use declarations. Each variant defines its type in the type namespace, though that type cannot be used as a type specifier. Tuple-like and unit-like variants also define a constructor in the value namespace.

A struct-like variant can be instantiated with a struct expression. A tuple-like variant can be instantiated with a call expression or a struct expression. A unit-like variant can be instantiated with a path expression or a struct expression. For example:

#![allow(unused)]
fn main() {
enum Examples {
    UnitLike,
    TupleLike(i32),
    StructLike { value: i32 },
}

use Examples::*; // Creates aliases to all variants.
let x = UnitLike; // Path expression of the const item.
let x = UnitLike {}; // Struct expression.
let y = TupleLike(123); // Call expression.
let y = TupleLike { 0: 123 }; // Struct expression using integer field names.
let z = StructLike { value: 123 }; // Struct expression.
}

Discriminants

Each enum instance has a discriminant: an integer logically associated to it that is used to determine which variant it holds.

Under the default representation, the discriminant is interpreted as an isize value. However, the compiler is allowed to use a smaller type (or another means of distinguishing variants) in its actual memory layout.

Assigning discriminant values

Explicit discriminants

In two circumstances, the discriminant of a variant may be explicitly set by following the variant name with = and a constant expression:

  1. if the enumeration is “unit-only”.

  2. if a primitive representation is used. For example:

    #![allow(unused)]
    fn main() {
    #[repr(u8)]
    enum Enum {
        Unit = 3,
        Tuple(u16),
        Struct {
            a: u8,
            b: u16,
        } = 1,
    }
    }

Implicit discriminants

If a discriminant for a variant is not specified, then it is set to one higher than the discriminant of the previous variant in the declaration. If the discriminant of the first variant in the declaration is unspecified, then it is set to zero.

#![allow(unused)]
fn main() {
enum Foo {
    Bar,            // 0
    Baz = 123,      // 123
    Quux,           // 124
}

let baz_discriminant = Foo::Baz as u32;
assert_eq!(baz_discriminant, 123);
}

Restrictions

It is an error when two variants share the same discriminant.

#![allow(unused)]
fn main() {
enum SharedDiscriminantError {
    SharedA = 1,
    SharedB = 1
}

enum SharedDiscriminantError2 {
    Zero,       // 0
    One,        // 1
    OneToo = 1  // 1 (collision with previous!)
}
}

It is also an error to have an unspecified discriminant where the previous discriminant is the maximum value for the size of the discriminant.

#![allow(unused)]
fn main() {
#[repr(u8)]
enum OverflowingDiscriminantError {
    Max = 255,
    MaxPlusOne // Would be 256, but that overflows the enum.
}

#[repr(u8)]
enum OverflowingDiscriminantError2 {
    MaxMinusOne = 254, // 254
    Max,               // 255
    MaxPlusOne         // Would be 256, but that overflows the enum.
}
}

Accessing discriminant

Via mem::discriminant

std::mem::discriminant returns an opaque reference to the discriminant of an enum value which can be compared. This cannot be used to get the value of the discriminant.

Casting

If an enumeration is unit-only (with no tuple and struct variants), then its discriminant can be directly accessed with a numeric cast; e.g.:

#![allow(unused)]
fn main() {
enum Enum {
    Foo,
    Bar,
    Baz,
}

assert_eq!(0, Enum::Foo as isize);
assert_eq!(1, Enum::Bar as isize);
assert_eq!(2, Enum::Baz as isize);
}

Field-less enums can be casted if they do not have explicit discriminants, or where only unit variants are explicit.

#![allow(unused)]
fn main() {
enum Fieldless {
    Tuple(),
    Struct{},
    Unit,
}

assert_eq!(0, Fieldless::Tuple() as isize);
assert_eq!(1, Fieldless::Struct{} as isize);
assert_eq!(2, Fieldless::Unit as isize);

#[repr(u8)]
enum FieldlessWithDiscrimants {
    First = 10,
    Tuple(),
    Second = 20,
    Struct{},
    Unit,
}

assert_eq!(10, FieldlessWithDiscrimants::First as u8);
assert_eq!(11, FieldlessWithDiscrimants::Tuple() as u8);
assert_eq!(20, FieldlessWithDiscrimants::Second as u8);
assert_eq!(21, FieldlessWithDiscrimants::Struct{} as u8);
assert_eq!(22, FieldlessWithDiscrimants::Unit as u8);
}

Pointer casting

If the enumeration specifies a primitive representation, then the discriminant may be reliably accessed via unsafe pointer casting:

#![allow(unused)]
fn main() {
#[repr(u8)]
enum Enum {
    Unit,
    Tuple(bool),
    Struct{a: bool},
}

impl Enum {
    fn discriminant(&self) -> u8 {
        unsafe { *(self as *const Self as *const u8) }
    }
}

let unit_like = Enum::Unit;
let tuple_like = Enum::Tuple(true);
let struct_like = Enum::Struct{a: false};

assert_eq!(0, unit_like.discriminant());
assert_eq!(1, tuple_like.discriminant());
assert_eq!(2, struct_like.discriminant());
}

Zero-variant enums

Enums with zero variants are known as zero-variant enums. As they have no valid values, they cannot be instantiated.

#![allow(unused)]
fn main() {
enum ZeroVariants {}
}

Zero-variant enums are equivalent to the never type, but they cannot be coerced into other types.

#![allow(unused)]
fn main() {
enum ZeroVariants {}
let x: ZeroVariants = panic!();
let y: u32 = x; // mismatched type error
}

Variant visibility

Enum variants syntactically allow a Visibility annotation, but this is rejected when the enum is validated. This allows items to be parsed with a unified syntax across different contexts where they are used.

#![allow(unused)]
fn main() {
macro_rules! mac_variant {
    ($vis:vis $name:ident) => {
        enum $name {
            $vis Unit,

            $vis Tuple(u8, u16),

            $vis Struct { f: u8 },
        }
    }
}

// Empty `vis` is allowed.
mac_variant! { E }

// This is allowed, since it is removed before being validated.
#[cfg(FALSE)]
enum E {
    pub U,
    pub(crate) T(u8),
    pub(super) T { f: String }
}
}

Unions

Syntax
Union :
   union IDENTIFIER GenericParams? WhereClause? {StructFields? }

A union declaration uses the same syntax as a struct declaration, except with union in place of struct. A union declaration defines the given name in the type namespace of the module or block where it is located.

#![allow(unused)]
fn main() {
#[repr(C)]
union MyUnion {
    f1: u32,
    f2: f32,
}
}

The key property of unions is that all fields of a union share common storage. As a result, writes to one field of a union can overwrite its other fields, and size of a union is determined by the size of its largest field.

Union field types are restricted to the following subset of types:

  • Copy types
  • References (&T and &mut T for arbitrary T)
  • ManuallyDrop<T> (for arbitrary T)
  • Tuples and arrays containing only allowed union field types

This restriction ensures, in particular, that union fields never need to be dropped. Like for structs and enums, it is possible to impl Drop for a union to manually define what happens when it gets dropped.

Unions without any fields are not accepted by the compiler, but can be accepted by macros.

Initialization of a union

A value of a union type can be created using the same syntax that is used for struct types, except that it must specify exactly one field:

#![allow(unused)]
fn main() {
union MyUnion { f1: u32, f2: f32 }

let u = MyUnion { f1: 1 };
}

The expression above creates a value of type MyUnion and initializes the storage using field f1. The union can be accessed using the same syntax as struct fields:

#![allow(unused)]
fn main() {
union MyUnion { f1: u32, f2: f32 }

let u = MyUnion { f1: 1 };
let f = unsafe { u.f1 };
}

Reading and writing union fields

Unions have no notion of an “active field”. Instead, every union access just interprets the storage as the type of the field used for the access. Reading a union field reads the bits of the union at the field’s type. Fields might have a non-zero offset (except when the C representation is used); in that case the bits starting at the offset of the fields are read. It is the programmer’s responsibility to make sure that the data is valid at the field’s type. Failing to do so results in undefined behavior. For example, reading the value 3 from a field of the boolean type is undefined behavior. Effectively, writing to and then reading from a union with the C representation is analogous to a transmute from the type used for writing to the type used for reading.

Consequently, all reads of union fields have to be placed in unsafe blocks:

#![allow(unused)]
fn main() {
union MyUnion { f1: u32, f2: f32 }
let u = MyUnion { f1: 1 };

unsafe {
    let f = u.f1;
}
}

Commonly, code using unions will provide safe wrappers around unsafe union field accesses.

In contrast, writes to union fields are safe, since they just overwrite arbitrary data, but cannot cause undefined behavior. (Note that union field types can never have drop glue, so a union field write will never implicitly drop anything.)

Pattern matching on unions

Another way to access union fields is to use pattern matching. Pattern matching on union fields uses the same syntax as struct patterns, except that the pattern must specify exactly one field. Since pattern matching is like reading the union with a particular field, it has to be placed in unsafe blocks as well.

#![allow(unused)]
fn main() {
union MyUnion { f1: u32, f2: f32 }

fn f(u: MyUnion) {
    unsafe {
        match u {
            MyUnion { f1: 10 } => { println!("ten"); }
            MyUnion { f2 } => { println!("{}", f2); }
        }
    }
}
}

Pattern matching may match a union as a field of a larger structure. In particular, when using a Rust union to implement a C tagged union via FFI, this allows matching on the tag and the corresponding field simultaneously:

#![allow(unused)]
fn main() {
#[repr(u32)]
enum Tag { I, F }

#[repr(C)]
union U {
    i: i32,
    f: f32,
}

#[repr(C)]
struct Value {
    tag: Tag,
    u: U,
}

fn is_zero(v: Value) -> bool {
    unsafe {
        match v {
            Value { tag: Tag::I, u: U { i: 0 } } => true,
            Value { tag: Tag::F, u: U { f: num } } if num == 0.0 => true,
            _ => false,
        }
    }
}
}

References to union fields

Since union fields share common storage, gaining write access to one field of a union can give write access to all its remaining fields. Borrow checking rules have to be adjusted to account for this fact. As a result, if one field of a union is borrowed, all its remaining fields are borrowed as well for the same lifetime.

#![allow(unused)]
fn main() {
union MyUnion { f1: u32, f2: f32 }
// ERROR: cannot borrow `u` (via `u.f2`) as mutable more than once at a time
fn test() {
    let mut u = MyUnion { f1: 1 };
    unsafe {
        let b1 = &mut u.f1;
//                    ---- first mutable borrow occurs here (via `u.f1`)
        let b2 = &mut u.f2;
//                    ^^^^ second mutable borrow occurs here (via `u.f2`)
        *b1 = 5;
    }
//  - first borrow ends here
    assert_eq!(unsafe { u.f1 }, 5);
}
}

As you could see, in many aspects (except for layouts, safety, and ownership) unions behave exactly like structs, largely as a consequence of inheriting their syntactic shape from structs. This is also true for many unmentioned aspects of Rust language (such as privacy, name resolution, type inference, generics, trait implementations, inherent implementations, coherence, pattern checking, etc etc etc).

Constant items

Syntax
ConstantItem :
   const ( IDENTIFIER | _ ) : Type ( = Expression )? ;

A constant item is an optionally named constant value which is not associated with a specific memory location in the program. Constants are essentially inlined wherever they are used, meaning that they are copied directly into the relevant context when used. This includes usage of constants from external crates, and non-Copy types. References to the same constant are not necessarily guaranteed to refer to the same memory address.

The constant declaration defines the constant value in the value namespace of the module or block where it is located.

Constants must be explicitly typed. The type must have a 'static lifetime: any references in the initializer must have 'static lifetimes.

Constants may refer to the address of other constants, in which case the address will have elided lifetimes where applicable, otherwise – in most cases – defaulting to the static lifetime. (See static lifetime elision.) The compiler is, however, still at liberty to translate the constant many times, so the address referred to may not be stable.

#![allow(unused)]
fn main() {
const BIT1: u32 = 1 << 0;
const BIT2: u32 = 1 << 1;

const BITS: [u32; 2] = [BIT1, BIT2];
const STRING: &'static str = "bitstring";

struct BitsNStrings<'a> {
    mybits: [u32; 2],
    mystring: &'a str,
}

const BITS_N_STRINGS: BitsNStrings<'static> = BitsNStrings {
    mybits: BITS,
    mystring: STRING,
};
}

The constant expression may only be omitted in a trait definition.

Constants with Destructors

Constants can contain destructors. Destructors are run when the value goes out of scope.

#![allow(unused)]
fn main() {
struct TypeWithDestructor(i32);

impl Drop for TypeWithDestructor {
    fn drop(&mut self) {
        println!("Dropped. Held {}.", self.0);
    }
}

const ZERO_WITH_DESTRUCTOR: TypeWithDestructor = TypeWithDestructor(0);

fn create_and_drop_zero_with_destructor() {
    let x = ZERO_WITH_DESTRUCTOR;
    // x gets dropped at end of function, calling drop.
    // prints "Dropped. Held 0.".
}
}

Unnamed constant

Unlike an associated constant, a free constant may be unnamed by using an underscore instead of the name. For example:

#![allow(unused)]
fn main() {
const _: () =  { struct _SameNameTwice; };

// OK although it is the same name as above:
const _: () =  { struct _SameNameTwice; };
}

As with underscore imports, macros may safely emit the same unnamed constant in the same scope more than once. For example, the following should not produce an error:

#![allow(unused)]
fn main() {
macro_rules! m {
    ($item: item) => { $item $item }
}

m!(const _: () = (););
// This expands to:
// const _: () = ();
// const _: () = ();
}

Evaluation

Free constants are always evaluated at compile-time to surface panics. This happens even within an unused function:

#![allow(unused)]
fn main() {
// Compile-time panic
const PANIC: () = std::unimplemented!();

fn unused_generic_function<T>() {
    // A failing compile-time assertion
    const _: () = assert!(usize::BITS == 0);
}
}

Static items

Syntax
StaticItem :
   ItemSafety?1 static mut? IDENTIFIER : Type ( = Expression )? ;

1

The safe and unsafe function qualifiers are only allowed semantically within extern blocks.

A static item is similar to a constant, except that it represents a precise memory location in the program. All references to the static refer to the same memory location. Static items have the static lifetime, which outlives all other lifetimes in a Rust program. Static items do not call drop at the end of the program.

The static declaration defines a static value in the value namespace of the module or block where it is located.

The static initializer is a constant expression evaluated at compile time. Static initializers may refer to other statics.

Non-mut static items that contain a type that is not interior mutable may be placed in read-only memory.

All access to a static is safe, but there are a number of restrictions on statics:

  • The type must have the Sync trait bound to allow thread-safe access.
  • Constants cannot refer to statics.

The initializer expression must be omitted in an external block, and must be provided for free static items.

The safe and unsafe qualifiers are semantically only allowed when used in an external block.

Statics & generics

A static item defined in a generic scope (for example in a blanket or default implementation) will result in exactly one static item being defined, as if the static definition was pulled out of the current scope into the module. There will not be one item per monomorphization.

This code:

use std::sync::atomic::{AtomicUsize, Ordering};

trait Tr {
    fn default_impl() {
        static COUNTER: AtomicUsize = AtomicUsize::new(0);
        println!("default_impl: counter was {}", COUNTER.fetch_add(1, Ordering::Relaxed));
    }

    fn blanket_impl();
}

struct Ty1 {}
struct Ty2 {}

impl<T> Tr for T {
    fn blanket_impl() {
        static COUNTER: AtomicUsize = AtomicUsize::new(0);
        println!("blanket_impl: counter was {}", COUNTER.fetch_add(1, Ordering::Relaxed));
    }
}

fn main() {
    <Ty1 as Tr>::default_impl();
    <Ty2 as Tr>::default_impl();
    <Ty1 as Tr>::blanket_impl();
    <Ty2 as Tr>::blanket_impl();
}

prints

default_impl: counter was 0
default_impl: counter was 1
blanket_impl: counter was 0
blanket_impl: counter was 1

Mutable statics

If a static item is declared with the mut keyword, then it is allowed to be modified by the program. One of Rust’s goals is to make concurrency bugs hard to run into, and this is obviously a very large source of race conditions or other bugs. For this reason, an unsafe block is required when either reading or writing a mutable static variable. Care should be taken to ensure that modifications to a mutable static are safe with respect to other threads running in the same process.

Mutable statics are still very useful, however. They can be used with C libraries and can also be bound from C libraries in an extern block.

#![allow(unused)]
fn main() {
fn atomic_add(_: *mut u32, _: u32) -> u32 { 2 }

static mut LEVELS: u32 = 0;

// This violates the idea of no shared state, and this doesn't internally
// protect against races, so this function is `unsafe`
unsafe fn bump_levels_unsafe() -> u32 {
    unsafe {
        let ret = LEVELS;
        LEVELS += 1;
        return ret;
    }
}

// As an alternative to `bump_levels_unsafe`, this function is safe, assuming
// that we have an atomic_add function which returns the old value. This
// function is safe only if no other code accesses the static in a non-atomic
// fashion. If such accesses are possible (such as in `bump_levels_unsafe`),
// then this would need to be `unsafe` to indicate to the caller that they
// must still guard against concurrent access.
fn bump_levels_safe() -> u32 {
    unsafe {
        return atomic_add(&raw mut LEVELS, 1);
    }
}
}

Mutable statics have the same restrictions as normal statics, except that the type does not have to implement the Sync trait.

Using Statics or Consts

It can be confusing whether or not you should use a constant item or a static item. Constants should, in general, be preferred over statics unless one of the following are true:

  • Large amounts of data are being stored
  • The single-address property of statics is required.
  • Interior mutability is required.

Traits

Syntax
Trait :
   unsafe? trait IDENTIFIER  GenericParams? ( : TypeParamBounds? )? WhereClause? {
     InnerAttribute*
     AssociatedItem*
   }

A trait describes an abstract interface that types can implement. This interface consists of associated items, which come in three varieties:

The trait declaration defines a trait in the type namespace of the module or block where it is located. Associated items are defined as members of the trait within their respective namespaces. Associated types are defined in the type namespace. Associated constants and associated functions are defined in the value namespace.

All traits define an implicit type parameter Self that refers to “the type that is implementing this interface”. Traits may also contain additional type parameters. These type parameters, including Self, may be constrained by other traits and so forth as usual.

Traits are implemented for specific types through separate implementations.

Trait functions may omit the function body by replacing it with a semicolon. This indicates that the implementation must define the function. If the trait function defines a body, this definition acts as a default for any implementation which does not override it. Similarly, associated constants may omit the equals sign and expression to indicate implementations must define the constant value. Associated types must never define the type, the type may only be specified in an implementation.

#![allow(unused)]
fn main() {
// Examples of associated trait items with and without definitions.
trait Example {
    const CONST_NO_DEFAULT: i32;
    const CONST_WITH_DEFAULT: i32 = 99;
    type TypeNoDefault;
    fn method_without_default(&self);
    fn method_with_default(&self) {}
}
}

Trait functions are not allowed to be const.

Trait bounds

Generic items may use traits as bounds on their type parameters.

Generic Traits

Type parameters can be specified for a trait to make it generic. These appear after the trait name, using the same syntax used in generic functions.

#![allow(unused)]
fn main() {
trait Seq<T> {
    fn len(&self) -> u32;
    fn elt_at(&self, n: u32) -> T;
    fn iter<F>(&self, f: F) where F: Fn(T);
}
}

Object Safety

Object safe traits can be the base trait of a trait object. A trait is object safe if it has the following qualities (defined in RFC 255):

  • All supertraits must also be object safe.
  • Sized must not be a supertrait. In other words, it must not require Self: Sized.
  • It must not have any associated constants.
  • It must not have any associated types with generics.
  • All associated functions must either be dispatchable from a trait object or be explicitly non-dispatchable:
    • Dispatchable functions must:
      • Not have any type parameters (although lifetime parameters are allowed).
      • Be a method that does not use Self except in the type of the receiver.
      • Have a receiver with one of the following types:
      • Not have an opaque return type; that is,
        • Not be an async fn (which has a hidden Future type).
        • Not have a return position impl Trait type (fn example(&self) -> impl Trait).
      • Not have a where Self: Sized bound (receiver type of Self (i.e. self) implies this).
    • Explicitly non-dispatchable functions require:
      • Have a where Self: Sized bound (receiver type of Self (i.e. self) implies this).
#![allow(unused)]
fn main() {
use std::rc::Rc;
use std::sync::Arc;
use std::pin::Pin;
// Examples of object safe methods.
trait TraitMethods {
    fn by_ref(self: &Self) {}
    fn by_ref_mut(self: &mut Self) {}
    fn by_box(self: Box<Self>) {}
    fn by_rc(self: Rc<Self>) {}
    fn by_arc(self: Arc<Self>) {}
    fn by_pin(self: Pin<&Self>) {}
    fn with_lifetime<'a>(self: &'a Self) {}
    fn nested_pin(self: Pin<Arc<Self>>) {}
}
struct S;
impl TraitMethods for S {}
let t: Box<dyn TraitMethods> = Box::new(S);
}
#![allow(unused)]
fn main() {
// This trait is object-safe, but these methods cannot be dispatched on a trait object.
trait NonDispatchable {
    // Non-methods cannot be dispatched.
    fn foo() where Self: Sized {}
    // Self type isn't known until runtime.
    fn returns(&self) -> Self where Self: Sized;
    // `other` may be a different concrete type of the receiver.
    fn param(&self, other: Self) where Self: Sized {}
    // Generics are not compatible with vtables.
    fn typed<T>(&self, x: T) where Self: Sized {}
}

struct S;
impl NonDispatchable for S {
    fn returns(&self) -> Self where Self: Sized { S }
}
let obj: Box<dyn NonDispatchable> = Box::new(S);
obj.returns(); // ERROR: cannot call with Self return
obj.param(S);  // ERROR: cannot call with Self parameter
obj.typed(1);  // ERROR: cannot call with generic type
}
#![allow(unused)]
fn main() {
use std::rc::Rc;
// Examples of non-object safe traits.
trait NotObjectSafe {
    const CONST: i32 = 1;  // ERROR: cannot have associated const

    fn foo() {}  // ERROR: associated function without Sized
    fn returns(&self) -> Self; // ERROR: Self in return type
    fn typed<T>(&self, x: T) {} // ERROR: has generic type parameters
    fn nested(self: Rc<Box<Self>>) {} // ERROR: nested receiver not yet supported
}

struct S;
impl NotObjectSafe for S {
    fn returns(&self) -> Self { S }
}
let obj: Box<dyn NotObjectSafe> = Box::new(S); // ERROR
}
#![allow(unused)]
fn main() {
// Self: Sized traits are not object-safe.
trait TraitWithSize where Self: Sized {}

struct S;
impl TraitWithSize for S {}
let obj: Box<dyn TraitWithSize> = Box::new(S); // ERROR
}
#![allow(unused)]
fn main() {
// Not object safe if `Self` is a type argument.
trait Super<A> {}
trait WithSelf: Super<Self> where Self: Sized {}

struct S;
impl<A> Super<A> for S {}
impl WithSelf for S {}
let obj: Box<dyn WithSelf> = Box::new(S); // ERROR: cannot use `Self` type parameter
}

Supertraits

Supertraits are traits that are required to be implemented for a type to implement a specific trait. Furthermore, anywhere a generic or trait object is bounded by a trait, it has access to the associated items of its supertraits.

Supertraits are declared by trait bounds on the Self type of a trait and transitively the supertraits of the traits declared in those trait bounds. It is an error for a trait to be its own supertrait.

The trait with a supertrait is called a subtrait of its supertrait.

The following is an example of declaring Shape to be a supertrait of Circle.

#![allow(unused)]
fn main() {
trait Shape { fn area(&self) -> f64; }
trait Circle : Shape { fn radius(&self) -> f64; }
}

And the following is the same example, except using where clauses.

#![allow(unused)]
fn main() {
trait Shape { fn area(&self) -> f64; }
trait Circle where Self: Shape { fn radius(&self) -> f64; }
}

This next example gives radius a default implementation using the area function from Shape.

#![allow(unused)]
fn main() {
trait Shape { fn area(&self) -> f64; }
trait Circle where Self: Shape {
    fn radius(&self) -> f64 {
        // A = pi * r^2
        // so algebraically,
        // r = sqrt(A / pi)
        (self.area() /std::f64::consts::PI).sqrt()
    }
}
}

This next example calls a supertrait method on a generic parameter.

#![allow(unused)]
fn main() {
trait Shape { fn area(&self) -> f64; }
trait Circle : Shape { fn radius(&self) -> f64; }
fn print_area_and_radius<C: Circle>(c: C) {
    // Here we call the area method from the supertrait `Shape` of `Circle`.
    println!("Area: {}", c.area());
    println!("Radius: {}", c.radius());
}
}

Similarly, here is an example of calling supertrait methods on trait objects.

#![allow(unused)]
fn main() {
trait Shape { fn area(&self) -> f64; }
trait Circle : Shape { fn radius(&self) -> f64; }
struct UnitCircle;
impl Shape for UnitCircle { fn area(&self) -> f64 { std::f64::consts::PI } }
impl Circle for UnitCircle { fn radius(&self) -> f64 { 1.0 } }
let circle = UnitCircle;
let circle = Box::new(circle) as Box<dyn Circle>;
let nonsense = circle.radius() * circle.area();
}

Unsafe traits

Traits items that begin with the unsafe keyword indicate that implementing the trait may be unsafe. It is safe to use a correctly implemented unsafe trait. The trait implementation must also begin with the unsafe keyword.

Sync and Send are examples of unsafe traits.

Parameter patterns

Function or method declarations without a body only allow IDENTIFIER or _ wild card patterns. mut IDENTIFIER is currently allowed, but it is deprecated and will become a hard error in the future.

In the 2015 edition, the pattern for a trait function or method parameter is optional:

#![allow(unused)]
fn main() {
// 2015 Edition
trait T {
    fn f(i32);  // Parameter identifiers are not required.
}
}

The kinds of patterns for parameters is limited to one of the following:

Beginning in the 2018 edition, function or method parameter patterns are no longer optional. Also, all irrefutable patterns are allowed as long as there is a body. Without a body, the limitations listed above are still in effect.

#![allow(unused)]
fn main() {
trait T {
    fn f1((a, b): (i32, i32)) {}
    fn f2(_: (i32, i32));  // Cannot use tuple pattern without a body.
}
}

Item visibility

Trait items syntactically allow a Visibility annotation, but this is rejected when the trait is validated. This allows items to be parsed with a unified syntax across different contexts where they are used. As an example, an empty vis macro fragment specifier can be used for trait items, where the macro rule may be used in other situations where visibility is allowed.

macro_rules! create_method {
    ($vis:vis $name:ident) => {
        $vis fn $name(&self) {}
    };
}

trait T1 {
    // Empty `vis` is allowed.
    create_method! { method_of_t1 }
}

struct S;

impl S {
    // Visibility is allowed here.
    create_method! { pub method_of_s }
}

impl T1 for S {}

fn main() {
    let s = S;
    s.method_of_t1();
    s.method_of_s();
}

Implementations

Syntax
Implementation :
   InherentImpl | TraitImpl

InherentImpl :
   impl GenericParams? Type WhereClause? {
      InnerAttribute*
      AssociatedItem*
   }

TraitImpl :
   unsafe? impl GenericParams? !? TypePath for Type
   WhereClause?
   {
      InnerAttribute*
      AssociatedItem*
   }

An implementation is an item that associates items with an implementing type. Implementations are defined with the keyword impl and contain functions that belong to an instance of the type that is being implemented or to the type statically.

There are two types of implementations:

  • inherent implementations
  • trait implementations

Inherent Implementations

An inherent implementation is defined as the sequence of the impl keyword, generic type declarations, a path to a nominal type, a where clause, and a bracketed set of associable items.

The nominal type is called the implementing type and the associable items are the associated items to the implementing type.

Inherent implementations associate the contained items to the implementing type. Inherent implementations can contain associated functions (including methods) and associated constants. They cannot contain associated type aliases.

The path to an associated item is any path to the implementing type, followed by the associated item’s identifier as the final path component.

A type can also have multiple inherent implementations. An implementing type must be defined within the same crate as the original type definition.

pub mod color {
    pub struct Color(pub u8, pub u8, pub u8);

    impl Color {
        pub const WHITE: Color = Color(255, 255, 255);
    }
}

mod values {
    use super::color::Color;
    impl Color {
        pub fn red() -> Color {
            Color(255, 0, 0)
        }
    }
}

pub use self::color::Color;
fn main() {
    // Actual path to the implementing type and impl in the same module.
    color::Color::WHITE;

    // Impl blocks in different modules are still accessed through a path to the type.
    color::Color::red();

    // Re-exported paths to the implementing type also work.
    Color::red();

    // Does not work, because use in `values` is not pub.
    // values::Color::red();
}

Trait Implementations

A trait implementation is defined like an inherent implementation except that the optional generic type declarations are followed by a trait, followed by the keyword for, followed by a path to a nominal type.

The trait is known as the implemented trait. The implementing type implements the implemented trait.

A trait implementation must define all non-default associated items declared by the implemented trait, may redefine default associated items defined by the implemented trait, and cannot define any other items.

The path to the associated items is < followed by a path to the implementing type followed by as followed by a path to the trait followed by > as a path component followed by the associated item’s path component.

Unsafe traits require the trait implementation to begin with the unsafe keyword.

#![allow(unused)]
fn main() {
#[derive(Copy, Clone)]
struct Point {x: f64, y: f64};
type Surface = i32;
struct BoundingBox {x: f64, y: f64, width: f64, height: f64};
trait Shape { fn draw(&self, s: Surface); fn bounding_box(&self) -> BoundingBox; }
fn do_draw_circle(s: Surface, c: Circle) { }
struct Circle {
    radius: f64,
    center: Point,
}

impl Copy for Circle {}

impl Clone for Circle {
    fn clone(&self) -> Circle { *self }
}

impl Shape for Circle {
    fn draw(&self, s: Surface) { do_draw_circle(s, *self); }
    fn bounding_box(&self) -> BoundingBox {
        let r = self.radius;
        BoundingBox {
            x: self.center.x - r,
            y: self.center.y - r,
            width: 2.0 * r,
            height: 2.0 * r,
        }
    }
}
}

Trait Implementation Coherence

A trait implementation is considered incoherent if either the orphan rules check fails or there are overlapping implementation instances.

Two trait implementations overlap when there is a non-empty intersection of the traits the implementation is for, the implementations can be instantiated with the same type.

Orphan rules

Given impl<P1..=Pn> Trait<T1..=Tn> for T0, an impl is valid only if at least one of the following is true:

  • Trait is a local trait
  • All of
    • At least one of the types T0..=Tn must be a local type. Let Ti be the first such type.
    • No uncovered type parameters P1..=Pn may appear in T0..Ti (excluding Ti)

Only the appearance of uncovered type parameters is restricted. Note that for the purposes of coherence, fundamental types are special. The T in Box<T> is not considered covered, and Box<LocalType> is considered local.

Generic Implementations

An implementation can take generic parameters, which can be used in the rest of the implementation. Implementation parameters are written directly after the impl keyword.

#![allow(unused)]
fn main() {
trait Seq<T> { fn dummy(&self, _: T) { } }
impl<T> Seq<T> for Vec<T> {
    /* ... */
}
impl Seq<bool> for u32 {
    /* Treat the integer as a sequence of bits */
}
}

Generic parameters constrain an implementation if the parameter appears at least once in one of:

  • The implemented trait, if it has one
  • The implementing type
  • As an associated type in the bounds of a type that contains another parameter that constrains the implementation

Type and const parameters must always constrain the implementation. Lifetimes must constrain the implementation if the lifetime is used in an associated type.

Examples of constraining situations:

#![allow(unused)]
fn main() {
trait Trait{}
trait GenericTrait<T> {}
trait HasAssocType { type Ty; }
struct Struct;
struct GenericStruct<T>(T);
struct ConstGenericStruct<const N: usize>([(); N]);
// T constrains by being an argument to GenericTrait.
impl<T> GenericTrait<T> for i32 { /* ... */ }

// T constrains by being an argument to GenericStruct
impl<T> Trait for GenericStruct<T> { /* ... */ }

// Likewise, N constrains by being an argument to ConstGenericStruct
impl<const N: usize> Trait for ConstGenericStruct<N> { /* ... */ }

// T constrains by being in an associated type in a bound for type `U` which is
// itself a generic parameter constraining the trait.
impl<T, U> GenericTrait<U> for u32 where U: HasAssocType<Ty = T> { /* ... */ }

// Like previous, except the type is `(U, isize)`. `U` appears inside the type
// that includes `T`, and is not the type itself.
impl<T, U> GenericStruct<U> where (U, isize): HasAssocType<Ty = T> { /* ... */ }
}

Examples of non-constraining situations:

#![allow(unused)]
fn main() {
// The rest of these are errors, since they have type or const parameters that
// do not constrain.

// T does not constrain since it does not appear at all.
impl<T> Struct { /* ... */ }

// N does not constrain for the same reason.
impl<const N: usize> Struct { /* ... */ }

// Usage of T inside the implementation does not constrain the impl.
impl<T> Struct {
    fn uses_t(t: &T) { /* ... */ }
}

// T is used as an associated type in the bounds for U, but U does not constrain.
impl<T, U> Struct where U: HasAssocType<Ty = T> { /* ... */ }

// T is used in the bounds, but not as an associated type, so it does not constrain.
impl<T, U> GenericTrait<U> for u32 where U: GenericTrait<T> {}
}

Example of an allowed unconstraining lifetime parameter:

#![allow(unused)]
fn main() {
struct Struct;
impl<'a> Struct {}
}

Example of a disallowed unconstraining lifetime parameter:

#![allow(unused)]
fn main() {
struct Struct;
trait HasAssocType { type Ty; }
impl<'a> HasAssocType for Struct {
    type Ty = &'a Struct;
}
}

Attributes on Implementations

Implementations may contain outer attributes before the impl keyword and inner attributes inside the brackets that contain the associated items. Inner attributes must come before any associated items. The attributes that have meaning here are cfg, deprecated, doc, and the lint check attributes.

External blocks

Syntax
ExternBlock :
   unsafe? extern Abi? {
      InnerAttribute*
      ExternalItem*
   }

ExternalItem :
   OuterAttribute* (
         MacroInvocationSemi
      | ( Visibility? ( StaticItem | Function ) )
   )

External blocks provide declarations of items that are not defined in the current crate and are the basis of Rust’s foreign function interface. These are akin to unchecked imports.

Two kinds of item declarations are allowed in external blocks: functions and statics. Calling functions or accessing statics that are declared in external blocks is only allowed in an unsafe context.

The external block defines its functions and statics in the value namespace of the module or block where it is located.

Functions

Functions within external blocks are declared in the same way as other Rust functions, with the exception that they must not have a body and are instead terminated by a semicolon. Patterns are not allowed in parameters, only IDENTIFIER or _ may be used. The safe and unsafe function qualifiers are allowed, but other function qualifiers (e.g. const, async, extern) are not.

Functions within external blocks may be called by Rust code, just like functions defined in Rust. The Rust compiler automatically translates between the Rust ABI and the foreign ABI.

A function declared in an extern block is implicitly unsafe unless the safe function qualifier is present.

When coerced to a function pointer, a function declared in an extern block has type extern "abi" for<'l1, ..., 'lm> fn(A1, ..., An) -> R, where 'l1, … 'lm are its lifetime parameters, A1, …, An are the declared types of its parameters, R is the declared return type.

Statics

Statics within external blocks are declared in the same way as statics outside of external blocks, except that they do not have an expression initializing their value. Unless a static item declared in an extern block is qualified as safe, it is unsafe to access that item, whether or not it’s mutable, because there is nothing guaranteeing that the bit pattern at the static’s memory is valid for the type it is declared with, since some arbitrary (e.g. C) code is in charge of initializing the static.

Extern statics can be either immutable or mutable just like statics outside of external blocks. An immutable static must be initialized before any Rust code is executed. It is not enough for the static to be initialized before Rust code reads from it. Once Rust code runs, mutating an immutable static (from inside or outside Rust) is UB, except if the mutation happens to bytes inside of an UnsafeCell.

ABI

By default external blocks assume that the library they are calling uses the standard C ABI on the specific platform. Other ABIs may be specified using an abi string, as shown here:

#![allow(unused)]
fn main() {
// Interface to the Windows API
unsafe extern "stdcall" { }
}

There are three ABI strings which are cross-platform, and which all compilers are guaranteed to support:

  • unsafe extern "Rust" – The default ABI when you write a normal fn foo() in any Rust code.
  • unsafe extern "C" – This is the same as extern fn foo(); whatever the default your C compiler supports.
  • unsafe extern "system" – Usually the same as extern "C", except on Win32, in which case it’s "stdcall", or what you should use to link to the Windows API itself

There are also some platform-specific ABI strings:

  • unsafe extern "cdecl" – The default for x86_32 C code.
  • unsafe extern "stdcall" – The default for the Win32 API on x86_32.
  • unsafe extern "win64" – The default for C code on x86_64 Windows.
  • unsafe extern "sysv64" – The default for C code on non-Windows x86_64.
  • unsafe extern "aapcs" – The default for ARM.
  • unsafe extern "fastcall" – The fastcall ABI – corresponds to MSVC’s __fastcall and GCC and clang’s __attribute__((fastcall))
  • unsafe extern "vectorcall" – The vectorcall ABI – corresponds to MSVC’s __vectorcall and clang’s __attribute__((vectorcall))
  • unsafe extern "thiscall" – The default for C++ member functions on MSVC – corresponds to MSVC’s __thiscall and GCC and clang’s __attribute__((thiscall))
  • unsafe extern "efiapi" – The ABI used for UEFI functions.

Variadic functions

Functions within external blocks may be variadic by specifying ... as the last argument. The variadic parameter may optionally be specified with an identifier.

#![allow(unused)]
fn main() {
unsafe extern "C" {
    safe fn foo(...);
    unsafe fn bar(x: i32, ...);
    unsafe fn with_name(format: *const u8, args: ...);
}
}

Attributes on extern blocks

The following attributes control the behavior of external blocks.

The link attribute specifies the name of a native library that the compiler should link with for the items within an extern block. It uses the MetaListNameValueStr syntax to specify its inputs. The name key is the name of the native library to link. The kind key is an optional value which specifies the kind of library with the following possible values:

  • dylib — Indicates a dynamic library. This is the default if kind is not specified.
  • static — Indicates a static library.
  • framework — Indicates a macOS framework. This is only valid for macOS targets.
  • raw-dylib — Indicates a dynamic library where the compiler will generate an import library to link against (see dylib versus raw-dylib below for details). This is only valid for Windows targets.

The name key must be included if kind is specified.

The optional modifiers argument is a way to specify linking modifiers for the library to link. Modifiers are specified as a comma-delimited string with each modifier prefixed with either a + or - to indicate that the modifier is enabled or disabled, respectively. Specifying multiple modifiers arguments in a single link attribute, or multiple identical modifiers in the same modifiers argument is not currently supported.
Example: #[link(name = "mylib", kind = "static", modifiers = "+whole-archive")].

The wasm_import_module key may be used to specify the WebAssembly module name for the items within an extern block when importing symbols from the host environment. The default module name is env if wasm_import_module is not specified.

#[link(name = "crypto")]
unsafe extern {
    // …
}

#[link(name = "CoreFoundation", kind = "framework")]
unsafe extern {
    // …
}

#[link(wasm_import_module = "foo")]
unsafe extern {
    // …
}

It is valid to add the link attribute on an empty extern block. You can use this to satisfy the linking requirements of extern blocks elsewhere in your code (including upstream crates) instead of adding the attribute to each extern block.

Linking modifiers: bundle

This modifier is only compatible with the static linking kind. Using any other kind will result in a compiler error.

When building a rlib or staticlib +bundle means that the native static library will be packed into the rlib or staticlib archive, and then retrieved from there during linking of the final binary.

When building a rlib -bundle means that the native static library is registered as a dependency of that rlib “by name”, and object files from it are included only during linking of the final binary, the file search by that name is also performed during final linking.
When building a staticlib -bundle means that the native static library is simply not included into the archive and some higher level build system will need to add it later during linking of the final binary.

This modifier has no effect when building other targets like executables or dynamic libraries.

The default for this modifier is +bundle.

More implementation details about this modifier can be found in bundle documentation for rustc.

Linking modifiers: whole-archive

This modifier is only compatible with the static linking kind. Using any other kind will result in a compiler error.

+whole-archive means that the static library is linked as a whole archive without throwing any object files away.

The default for this modifier is -whole-archive.

More implementation details about this modifier can be found in whole-archive documentation for rustc.

Linking modifiers: verbatim

This modifier is compatible with all linking kinds.

+verbatim means that rustc itself won’t add any target-specified library prefixes or suffixes (like lib or .a) to the library name, and will try its best to ask for the same thing from the linker.

-verbatim means that rustc will either add a target-specific prefix and suffix to the library name before passing it to linker, or won’t prevent linker from implicitly adding it.

The default for this modifier is -verbatim.

More implementation details about this modifier can be found in verbatim documentation for rustc.

dylib versus raw-dylib

On Windows, linking against a dynamic library requires that an import library is provided to the linker: this is a special static library that declares all of the symbols exported by the dynamic library in such a way that the linker knows that they have to be dynamically loaded at runtime.

Specifying kind = "dylib" instructs the Rust compiler to link an import library based on the name key. The linker will then use its normal library resolution logic to find that import library. Alternatively, specifying kind = "raw-dylib" instructs the compiler to generate an import library during compilation and provide that to the linker instead.

raw-dylib is only supported on Windows. Using it when targeting other platforms will result in a compiler error.

The import_name_type key

On x86 Windows, names of functions are “decorated” (i.e., have a specific prefix and/or suffix added) to indicate their calling convention. For example, a stdcall calling convention function with the name fn1 that has no arguments would be decorated as _fn1@0. However, the PE Format does also permit names to have no prefix or be undecorated. Additionally, the MSVC and GNU toolchains use different decorations for the same calling conventions which means, by default, some Win32 functions cannot be called using the raw-dylib link kind via the GNU toolchain.

To allow for these differences, when using the raw-dylib link kind you may also specify the import_name_type key with one of the following values to change how functions are named in the generated import library:

  • decorated: The function name will be fully-decorated using the MSVC toolchain format.
  • noprefix: The function name will be decorated using the MSVC toolchain format, but skipping the leading ?, @, or optionally _.
  • undecorated: The function name will not be decorated.

If the import_name_type key is not specified, then the function name will be fully-decorated using the target toolchain’s format.

Variables are never decorated and so the import_name_type key has no effect on how they are named in the generated import library.

The import_name_type key is only supported on x86 Windows. Using it when targeting other platforms will result in a compiler error.

The link_name attribute may be specified on declarations inside an extern block to indicate the symbol to import for the given function or static. It uses the MetaNameValueStr syntax to specify the name of the symbol.

#![allow(unused)]
fn main() {
unsafe extern {
    #[link_name = "actual_symbol_name"]
    safe fn name_in_rust();
}
}

Using this attribute with the link_ordinal attribute will result in a compiler error.

The link_ordinal attribute can be applied on declarations inside an extern block to indicate the numeric ordinal to use when generating the import library to link against. An ordinal is a unique number per symbol exported by a dynamic library on Windows and can be used when the library is being loaded to find that symbol rather than having to look it up by name.

Warning: link_ordinal should only be used in cases where the ordinal of the symbol is known to be stable: if the ordinal of a symbol is not explicitly set when its containing binary is built then one will be automatically assigned to it, and that assigned ordinal may change between builds of the binary.

#[link(name = "exporter", kind = "raw-dylib")]
unsafe extern "stdcall" {
    #[link_ordinal(15)]
    safe fn imported_function_stdcall(i: i32);
}

This attribute is only used with the raw-dylib linking kind. Using any other kind will result in a compiler error.

Using this attribute with the link_name attribute will result in a compiler error.

Attributes on function parameters

Attributes on extern function parameters follow the same rules and restrictions as regular function parameters.

Generic parameters

Syntax
GenericParams :
      < >
   | < (GenericParam ,)* GenericParam ,? >

GenericParam :
   OuterAttribute* ( LifetimeParam | TypeParam | ConstParam )

LifetimeParam :
   LIFETIME_OR_LABEL ( : LifetimeBounds )?

TypeParam :
   IDENTIFIER ( : TypeParamBounds? )? ( = Type )?

ConstParam:
   const IDENTIFIER : Type ( = Block | IDENTIFIER | -?LITERAL )?

Functions, type aliases, structs, enumerations, unions, traits, and implementations may be parameterized by types, constants, and lifetimes. These parameters are listed in angle brackets (<...>), usually immediately after the name of the item and before its definition. For implementations, which don’t have a name, they come directly after impl. The order of generic parameters is restricted to lifetime parameters and then type and const parameters intermixed. The same parameter name may not be declared more than once in a GenericParams list.

Some examples of items with type, const, and lifetime parameters:

#![allow(unused)]
fn main() {
fn foo<'a, T>() {}
trait A<U> {}
struct Ref<'a, T> where T: 'a { r: &'a T }
struct InnerArray<T, const N: usize>([T; N]);
struct EitherOrderWorks<const N: bool, U>(U);
}

Generic parameters are in scope within the item definition where they are declared. They are not in scope for items declared within the body of a function as described in item declarations. See generic parameter scopes for more details.

References, raw pointers, arrays, slices, tuples, and function pointers have lifetime or type parameters as well, but are not referred to with path syntax.

'_ is not a valid lifetime parameter.

Const generics

Const generic parameters allow items to be generic over constant values. The const identifier introduces a name in the value namespace for the constant parameter, and all instances of the item must be instantiated with a value of the given type.

The only allowed types of const parameters are u8, u16, u32, u64, u128, usize, i8, i16, i32, i64, i128, isize, char and bool.

Const parameters can be used anywhere a const item can be used, with the exception that when used in a type or array repeat expression, it must be standalone (as described below). That is, they are allowed in the following places:

  1. As an applied const to any type which forms a part of the signature of the item in question.
  2. As part of a const expression used to define an associated const, or as a parameter to an associated type.
  3. As a value in any runtime expression in the body of any functions in the item.
  4. As a parameter to any type used in the body of any functions in the item.
  5. As a part of the type of any fields in the item.
#![allow(unused)]
fn main() {
// Examples where const generic parameters can be used.

// Used in the signature of the item itself.
fn foo<const N: usize>(arr: [i32; N]) {
    // Used as a type within a function body.
    let x: [i32; N];
    // Used as an expression.
    println!("{}", N * 2);
}

// Used as a field of a struct.
struct Foo<const N: usize>([i32; N]);

impl<const N: usize> Foo<N> {
    // Used as an associated constant.
    const CONST: usize = N * 4;
}

trait Trait {
    type Output;
}

impl<const N: usize> Trait for Foo<N> {
    // Used as an associated type.
    type Output = [i32; N];
}
}
#![allow(unused)]
fn main() {
// Examples where const generic parameters cannot be used.
fn foo<const N: usize>() {
    // Cannot use in item definitions within a function body.
    const BAD_CONST: [usize; N] = [1; N];
    static BAD_STATIC: [usize; N] = [1; N];
    fn inner(bad_arg: [usize; N]) {
        let bad_value = N * 2;
    }
    type BadAlias = [usize; N];
    struct BadStruct([usize; N]);
}
}

As a further restriction, const parameters may only appear as a standalone argument inside of a type or array repeat expression. In those contexts, they may only be used as a single segment path expression, possibly inside a block (such as N or {N}). That is, they cannot be combined with other expressions.

#![allow(unused)]
fn main() {
// Examples where const parameters may not be used.

// Not allowed to combine in other expressions in types, such as the
// arithmetic expression in the return type here.
fn bad_function<const N: usize>() -> [u8; {N + 1}] {
    // Similarly not allowed for array repeat expressions.
    [1; {N + 1}]
}
}

A const argument in a path specifies the const value to use for that item. The argument must be a const expression of the type ascribed to the const parameter. The const expression must be a block expression (surrounded with braces) unless it is a single path segment (an IDENTIFIER) or a literal (with a possibly leading - token).

Note: This syntactic restriction is necessary to avoid requiring infinite lookahead when parsing an expression inside of a type.

#![allow(unused)]
fn main() {
fn double<const N: i32>() {
    println!("doubled: {}", N * 2);
}

const SOME_CONST: i32 = 12;

fn example() {
    // Example usage of a const argument.
    double::<9>();
    double::<-123>();
    double::<{7 + 8}>();
    double::<SOME_CONST>();
    double::<{ SOME_CONST + 5 }>();
}
}

When there is ambiguity if a generic argument could be resolved as either a type or const argument, it is always resolved as a type. Placing the argument in a block expression can force it to be interpreted as a const argument.

#![allow(unused)]
fn main() {
type N = u32;
struct Foo<const N: usize>;
// The following is an error, because `N` is interpreted as the type alias `N`.
fn foo<const N: usize>() -> Foo<N> { todo!() } // ERROR
// Can be fixed by wrapping in braces to force it to be interpreted as the `N`
// const parameter:
fn bar<const N: usize>() -> Foo<{ N }> { todo!() } // ok
}

Unlike type and lifetime parameters, const parameters can be declared without being used inside of a parameterized item, with the exception of implementations as described in generic implementations:

#![allow(unused)]
fn main() {
// ok
struct Foo<const N: usize>;
enum Bar<const M: usize> { A, B }

// ERROR: unused parameter
struct Baz<T>;
struct Biz<'a>;
struct Unconstrained;
impl<const N: usize> Unconstrained {}
}

When resolving a trait bound obligation, the exhaustiveness of all implementations of const parameters is not considered when determining if the bound is satisfied. For example, in the following, even though all possible const values for the bool type are implemented, it is still an error that the trait bound is not satisfied:

#![allow(unused)]
fn main() {
struct Foo<const B: bool>;
trait Bar {}
impl Bar for Foo<true> {}
impl Bar for Foo<false> {}

fn needs_bar(_: impl Bar) {}
fn generic<const B: bool>() {
    let v = Foo::<B>;
    needs_bar(v); // ERROR: trait bound `Foo<B>: Bar` is not satisfied
}
}

Where clauses

Syntax
WhereClause :
   where ( WhereClauseItem , )* WhereClauseItem ?

WhereClauseItem :
      LifetimeWhereClauseItem
   | TypeBoundWhereClauseItem

LifetimeWhereClauseItem :
   Lifetime : LifetimeBounds

TypeBoundWhereClauseItem :
   ForLifetimes? Type : TypeParamBounds?

Where clauses provide another way to specify bounds on type and lifetime parameters as well as a way to specify bounds on types that aren’t type parameters.

The for keyword can be used to introduce higher-ranked lifetimes. It only allows LifetimeParam parameters.

#![allow(unused)]
fn main() {
struct A<T>
where
    T: Iterator,            // Could use A<T: Iterator> instead
    T::Item: Copy,          // Bound on an associated type
    String: PartialEq<T>,   // Bound on `String`, using the type parameter
    i32: Default,           // Allowed, but not useful
{
    f: T,
}
}

Attributes

Generic lifetime and type parameters allow attributes on them. There are no built-in attributes that do anything in this position, although custom derive attributes may give meaning to it.

This example shows using a custom derive attribute to modify the meaning of a generic parameter.

// Assume that the derive for MyFlexibleClone declared `my_flexible_clone` as
// an attribute it understands.
#[derive(MyFlexibleClone)]
struct Foo<#[my_flexible_clone(unbounded)] H> {
    a: *const H
}

Associated Items

Syntax
AssociatedItem :
   OuterAttribute* (
         MacroInvocationSemi
      | ( Visibility? ( TypeAlias | ConstantItem | Function ) )
   )

Associated Items are the items declared in traits or defined in implementations. They are called this because they are defined on an associate type — the type in the implementation. They are a subset of the kinds of items you can declare in a module. Specifically, there are associated functions (including methods), associated types, and associated constants.

Associated items are useful when the associated item logically is related to the associating item. For example, the is_some method on Option is intrinsically related to Options, so should be associated.

Every associated item kind comes in two varieties: definitions that contain the actual implementation and declarations that declare signatures for definitions.

It is the declarations that make up the contract of traits and what is available on generic types.

Associated functions and methods

Associated functions are functions associated with a type.

An associated function declaration declares a signature for an associated function definition. It is written as a function item, except the function body is replaced with a ;.

The identifier is the name of the function. The generics, parameter list, return type, and where clause of the associated function must be the same as the associated function declarations’s.

An associated function definition defines a function associated with another type. It is written the same as a function item.

An example of a common associated function is a new function that returns a value of the type the associated function is associated with.

struct Struct {
    field: i32
}

impl Struct {
    fn new() -> Struct {
        Struct {
            field: 0i32
        }
    }
}

fn main () {
    let _struct = Struct::new();
}

When the associated function is declared on a trait, the function can also be called with a path that is a path to the trait appended by the name of the trait. When this happens, it is substituted for <_ as Trait>::function_name.

#![allow(unused)]
fn main() {
trait Num {
    fn from_i32(n: i32) -> Self;
}

impl Num for f64 {
    fn from_i32(n: i32) -> f64 { n as f64 }
}

// These 4 are all equivalent in this case.
let _: f64 = Num::from_i32(42);
let _: f64 = <_ as Num>::from_i32(42);
let _: f64 = <f64 as Num>::from_i32(42);
let _: f64 = f64::from_i32(42);
}

Methods

Associated functions whose first parameter is named self are called methods and may be invoked using the method call operator, for example, x.foo(), as well as the usual function call notation.

If the type of the self parameter is specified, it is limited to types resolving to one generated by the following grammar (where 'lt denotes some arbitrary lifetime):

P = &'lt S | &'lt mut S | Box<S> | Rc<S> | Arc<S> | Pin<P>
S = Self | P

The Self terminal in this grammar denotes a type resolving to the implementing type. This can also include the contextual type alias Self, other type aliases, or associated type projections resolving to the implementing type.

#![allow(unused)]
fn main() {
use std::rc::Rc;
use std::sync::Arc;
use std::pin::Pin;
// Examples of methods implemented on struct `Example`.
struct Example;
type Alias = Example;
trait Trait { type Output; }
impl Trait for Example { type Output = Example; }
impl Example {
    fn by_value(self: Self) {}
    fn by_ref(self: &Self) {}
    fn by_ref_mut(self: &mut Self) {}
    fn by_box(self: Box<Self>) {}
    fn by_rc(self: Rc<Self>) {}
    fn by_arc(self: Arc<Self>) {}
    fn by_pin(self: Pin<&Self>) {}
    fn explicit_type(self: Arc<Example>) {}
    fn with_lifetime<'a>(self: &'a Self) {}
    fn nested<'a>(self: &mut &'a Arc<Rc<Box<Alias>>>) {}
    fn via_projection(self: <Example as Trait>::Output) {}
}
}

Shorthand syntax can be used without specifying a type, which have the following equivalents:

ShorthandEquivalent
selfself: Self
&'lifetime selfself: &'lifetime Self
&'lifetime mut selfself: &'lifetime mut Self

Note: Lifetimes can be, and usually are, elided with this shorthand.

If the self parameter is prefixed with mut, it becomes a mutable variable, similar to regular parameters using a mut identifier pattern. For example:

#![allow(unused)]
fn main() {
trait Changer: Sized {
    fn change(mut self) {}
    fn modify(mut self: Box<Self>) {}
}
}

As an example of methods on a trait, consider the following:

#![allow(unused)]
fn main() {
type Surface = i32;
type BoundingBox = i32;
trait Shape {
    fn draw(&self, surface: Surface);
    fn bounding_box(&self) -> BoundingBox;
}
}

This defines a trait with two methods. All values that have implementations of this trait while the trait is in scope can have their draw and bounding_box methods called.

#![allow(unused)]
fn main() {
type Surface = i32;
type BoundingBox = i32;
trait Shape {
    fn draw(&self, surface: Surface);
    fn bounding_box(&self) -> BoundingBox;
}

struct Circle {
    // ...
}

impl Shape for Circle {
    // ...
  fn draw(&self, _: Surface) {}
  fn bounding_box(&self) -> BoundingBox { 0i32 }
}

impl Circle {
    fn new() -> Circle { Circle{} }
}

let circle_shape = Circle::new();
let bounding_box = circle_shape.bounding_box();
}

Edition differences: In the 2015 edition, it is possible to declare trait methods with anonymous parameters (e.g. fn foo(u8)). This is deprecated and an error as of the 2018 edition. All parameters must have an argument name.

Attributes on method parameters

Attributes on method parameters follow the same rules and restrictions as regular function parameters.

Associated Types

Associated types are type aliases associated with another type. Associated types cannot be defined in inherent implementations nor can they be given a default implementation in traits.

An associated type declaration declares a signature for associated type definitions. It is written in one of the following forms, where Assoc is the name of the associated type, Params is a comma-separated list of type, lifetime or const parameters, Bounds is a plus-separated list of trait bounds that the associated type must meet, and WhereBounds is a comma-separated list of bounds that the parameters must meet:

type Assoc;
type Assoc: Bounds;
type Assoc<Params>;
type Assoc<Params>: Bounds;
type Assoc<Params> where WhereBounds;
type Assoc<Params>: Bounds where WhereBounds;

The identifier is the name of the declared type alias. The optional trait bounds must be fulfilled by the implementations of the type alias. There is an implicit Sized bound on associated types that can be relaxed using the special ?Sized bound.

An associated type definition defines a type alias for the implementation of a trait on a type. They are written similarly to an associated type declaration, but cannot contain Bounds, but instead must contain a Type:

type Assoc = Type;
type Assoc<Params> = Type; // the type `Type` here may reference `Params`
type Assoc<Params> = Type where WhereBounds;
type Assoc<Params> where WhereBounds = Type; // deprecated, prefer the form above

If a type Item has an associated type Assoc from a trait Trait, then <Item as Trait>::Assoc is a type that is an alias of the type specified in the associated type definition. Furthermore, if Item is a type parameter, then Item::Assoc can be used in type parameters.

Associated types may include generic parameters and where clauses; these are often referred to as generic associated types, or GATs. If the type Thing has an associated type Item from a trait Trait with the generics <'a> , the type can be named like <Thing as Trait>::Item<'x>, where 'x is some lifetime in scope. In this case, 'x will be used wherever 'a appears in the associated type definitions on impls.

trait AssociatedType {
    // Associated type declaration
    type Assoc;
}

struct Struct;

struct OtherStruct;

impl AssociatedType for Struct {
    // Associated type definition
    type Assoc = OtherStruct;
}

impl OtherStruct {
    fn new() -> OtherStruct {
        OtherStruct
    }
}

fn main() {
    // Usage of the associated type to refer to OtherStruct as <Struct as AssociatedType>::Assoc
    let _other_struct: OtherStruct = <Struct as AssociatedType>::Assoc::new();
}

An example of associated types with generics and where clauses:

struct ArrayLender<'a, T>(&'a mut [T; 16]);

trait Lend {
    // Generic associated type declaration
    type Lender<'a> where Self: 'a;
    fn lend<'a>(&'a mut self) -> Self::Lender<'a>;
}

impl<T> Lend for [T; 16] {
    // Generic associated type definition
    type Lender<'a> = ArrayLender<'a, T> where Self: 'a;

    fn lend<'a>(&'a mut self) -> Self::Lender<'a> {
        ArrayLender(self)
    }
}

fn borrow<'a, T: Lend>(array: &'a mut T) -> <T as Lend>::Lender<'a> {
    array.lend()
}


fn main() {
    let mut array = [0usize; 16];
    let lender = borrow(&mut array);
}

Associated Types Container Example

Consider the following example of a Container trait. Notice that the type is available for use in the method signatures:

#![allow(unused)]
fn main() {
trait Container {
    type E;
    fn empty() -> Self;
    fn insert(&mut self, elem: Self::E);
}
}

In order for a type to implement this trait, it must not only provide implementations for every method, but it must specify the type E. Here’s an implementation of Container for the standard library type Vec:

#![allow(unused)]
fn main() {
trait Container {
    type E;
    fn empty() -> Self;
    fn insert(&mut self, elem: Self::E);
}
impl<T> Container for Vec<T> {
    type E = T;
    fn empty() -> Vec<T> { Vec::new() }
    fn insert(&mut self, x: T) { self.push(x); }
}
}

Relationship between Bounds and WhereBounds

In this example:

#![allow(unused)]
fn main() {
use std::fmt::Debug;
trait Example {
    type Output<T>: Ord where T: Debug;
}
}

Given a reference to the associated type like <X as Example>::Output<Y>, the associated type itself must be Ord, and the type Y must be Debug.

Required where clauses on generic associated types

Generic associated type declarations on traits currently may require a list of where clauses, dependent on functions in the trait and how the GAT is used. These rules may be loosened in the future; updates can be found on the generic associated types initiative repository.

In a few words, these where clauses are required in order to maximize the allowed definitions of the associated type in impls. To do this, any clauses that can be proven to hold on functions (using the parameters of the function or trait) where a GAT appears as an input or output must also be written on the GAT itself.

#![allow(unused)]
fn main() {
trait LendingIterator {
    type Item<'x> where Self: 'x;
    fn next<'a>(&'a mut self) -> Self::Item<'a>;
}
}

In the above, on the next function, we can prove that Self: 'a, because of the implied bounds from &'a mut self; therefore, we must write the equivalent bound on the GAT itself: where Self: 'x.

When there are multiple functions in a trait that use the GAT, then the intersection of the bounds from the different functions are used, rather than the union.

#![allow(unused)]
fn main() {
trait Check<T> {
    type Checker<'x>;
    fn create_checker<'a>(item: &'a T) -> Self::Checker<'a>;
    fn do_check(checker: Self::Checker<'_>);
}
}

In this example, no bounds are required on the type Checker<'a>;. While we know that T: 'a on create_checker, we do not know that on do_check. However, if do_check was commented out, then the where T: 'x bound would be required on Checker.

The bounds on associated types also propagate required where clauses.

#![allow(unused)]
fn main() {
trait Iterable {
    type Item<'a> where Self: 'a;
    type Iterator<'a>: Iterator<Item = Self::Item<'a>> where Self: 'a;
    fn iter<'a>(&'a self) -> Self::Iterator<'a>;
}
}

Here, where Self: 'a is required on Item because of iter. However, Item is used in the bounds of Iterator, the where Self: 'a clause is also required there.

Finally, any explicit uses of 'static on GATs in the trait do not count towards the required bounds.

#![allow(unused)]
fn main() {
trait StaticReturn {
    type Y<'a>;
    fn foo(&self) -> Self::Y<'static>;
}
}

Associated Constants

Associated constants are constants associated with a type.

An associated constant declaration declares a signature for associated constant definitions. It is written as const, then an identifier, then :, then a type, finished by a ;.

The identifier is the name of the constant used in the path. The type is the type that the definition has to implement.

An associated constant definition defines a constant associated with a type. It is written the same as a constant item.

Associated constant definitions undergo constant evaluation only when referenced. Further, definitions that include generic parameters are evaluated after monomorphization.

struct Struct;
struct GenericStruct<const ID: i32>;

impl Struct {
    // Definition not immediately evaluated
    const PANIC: () = panic!("compile-time panic");
}

impl<const ID: i32> GenericStruct<ID> {
    // Definition not immediately evaluated
    const NON_ZERO: () = if ID == 0 {
        panic!("contradiction")
    };
}

fn main() {
    // Referencing Struct::PANIC causes compilation error
    let _ = Struct::PANIC;

    // Fine, ID is not 0
    let _ = GenericStruct::<1>::NON_ZERO;

    // Compilation error from evaluating NON_ZERO with ID=0
    let _ = GenericStruct::<0>::NON_ZERO;
}

Associated Constants Examples

A basic example:

trait ConstantId {
    const ID: i32;
}

struct Struct;

impl ConstantId for Struct {
    const ID: i32 = 1;
}

fn main() {
    assert_eq!(1, Struct::ID);
}

Using default values:

trait ConstantIdDefault {
    const ID: i32 = 1;
}

struct Struct;
struct OtherStruct;

impl ConstantIdDefault for Struct {}

impl ConstantIdDefault for OtherStruct {
    const ID: i32 = 5;
}

fn main() {
    assert_eq!(1, Struct::ID);
    assert_eq!(5, OtherStruct::ID);
}

Attributes

Syntax
InnerAttribute :
   # ! [ Attr ]

OuterAttribute :
   # [ Attr ]

Attr :
      SimplePath AttrInput?
   | unsafe ( SimplePath AttrInput? )

AttrInput :
      DelimTokenTree
   | = Expression

An attribute is a general, free-form metadatum that is interpreted according to name, convention, language, and compiler version. Attributes are modeled on Attributes in ECMA-335, with the syntax coming from ECMA-334 (C#).

Inner attributes, written with a bang (!) after the hash (#), apply to the item that the attribute is declared within. Outer attributes, written without the bang after the hash, apply to the thing that follows the attribute.

The attribute consists of a path to the attribute, followed by an optional delimited token tree whose interpretation is defined by the attribute. Attributes other than macro attributes also allow the input to be an equals sign (=) followed by an expression. See the meta item syntax below for more details.

An attribute may be unsafe to apply. To avoid undefined behavior when using these attributes, certain obligations that cannot be checked by the compiler must be met. To assert these have been, the attribute is wrapped in unsafe(..), e.g. #[unsafe(no_mangle)].

The following attributes are unsafe:

Attributes can be classified into the following kinds:

Attributes may be applied to many things in the language:

Some examples of attributes:

#![allow(unused)]
fn main() {
// General metadata applied to the enclosing module or crate.
#![crate_type = "lib"]

// A function marked as a unit test
#[test]
fn test_foo() {
    /* ... */
}

// A conditionally-compiled module
#[cfg(target_os = "linux")]
mod bar {
    /* ... */
}

// A lint attribute used to suppress a warning/error
#[allow(non_camel_case_types)]
type int8_t = i8;

// Inner attribute applies to the entire function.
fn some_unused_variables() {
  #![allow(unused_variables)]

  let x = ();
  let y = ();
  let z = ();
}
}

Meta Item Attribute Syntax

A “meta item” is the syntax used for the Attr rule by most built-in attributes. It has the following grammar:

Syntax
MetaItem :
      SimplePath
   | SimplePath = Expression
   | SimplePath ( MetaSeq? )

MetaSeq :
   MetaItemInner ( , MetaItemInner )* ,?

MetaItemInner :
      MetaItem
   | Expression

Expressions in meta items must macro-expand to literal expressions, which must not include integer or float type suffixes. Expressions which are not literal expressions will be syntactically accepted (and can be passed to proc-macros), but will be rejected after parsing.

Note that if the attribute appears within another macro, it will be expanded after that outer macro. For example, the following code will expand the Serialize proc-macro first, which must preserve the include_str! call in order for it to be expanded:

#[derive(Serialize)]
struct Foo {
    #[doc = include_str!("x.md")]
    x: u32
}

Additionally, macros in attributes will be expanded only after all other attributes applied to the item:

#[macro_attr1] // expanded first
#[doc = mac!()] // `mac!` is expanded fourth.
#[macro_attr2] // expanded second
#[derive(MacroDerive1, MacroDerive2)] // expanded third
fn foo() {}

Various built-in attributes use different subsets of the meta item syntax to specify their inputs. The following grammar rules show some commonly used forms:

Syntax
MetaWord:
   IDENTIFIER

MetaNameValueStr:
   IDENTIFIER = (STRING_LITERAL | RAW_STRING_LITERAL)

MetaListPaths:
   IDENTIFIER ( ( SimplePath (, SimplePath)* ,? )? )

MetaListIdents:
   IDENTIFIER ( ( IDENTIFIER (, IDENTIFIER)* ,? )? )

MetaListNameValueStr:
   IDENTIFIER ( ( MetaNameValueStr (, MetaNameValueStr)* ,? )? )

Some examples of meta items are:

StyleExample
MetaWordno_std
MetaNameValueStrdoc = "example"
MetaListPathsallow(unused, clippy::inline_always)
MetaListIdentsmacro_use(foo, bar)
MetaListNameValueStrlink(name = "CoreFoundation", kind = "framework")

Active and inert attributes

An attribute is either active or inert. During attribute processing, active attributes remove themselves from the thing they are on while inert attributes stay on.

The cfg and cfg_attr attributes are active. The test attribute is inert when compiling for tests and active otherwise. Attribute macros are active. All other attributes are inert.

Tool attributes

The compiler may allow attributes for external tools where each tool resides in its own module in the tool prelude. The first segment of the attribute path is the name of the tool, with one or more additional segments whose interpretation is up to the tool.

When a tool is not in use, the tool’s attributes are accepted without a warning. When the tool is in use, the tool is responsible for processing and interpretation of its attributes.

Tool attributes are not available if the no_implicit_prelude attribute is used.

#![allow(unused)]
fn main() {
// Tells the rustfmt tool to not format the following element.
#[rustfmt::skip]
struct S {
}

// Controls the "cyclomatic complexity" threshold for the clippy tool.
#[clippy::cyclomatic_complexity = "100"]
pub fn f() {}
}

Note: rustc currently recognizes the tools “clippy”, “rustfmt”, “diagnostic”, “miri” and “rust_analyzer”.

Built-in attributes index

The following is an index of all built-in attributes.

  • Conditional compilation
    • cfg — Controls conditional compilation.
    • cfg_attr — Conditionally includes attributes.
  • Testing
    • test — Marks a function as a test.
    • ignore — Disables a test function.
    • should_panic — Indicates a test should generate a panic.
  • Derive
  • Macros
  • Diagnostics
  • ABI, linking, symbols, and FFI
    • link — Specifies a native library to link with an extern block.
    • link_name — Specifies the name of the symbol for functions or statics in an extern block.
    • link_ordinal — Specifies the ordinal of the symbol for functions or statics in an extern block.
    • no_link — Prevents linking an extern crate.
    • repr — Controls type layout.
    • crate_type — Specifies the type of crate (library, executable, etc.).
    • no_main — Disables emitting the main symbol.
    • export_name — Specifies the exported symbol name for a function or static.
    • link_section — Specifies the section of an object file to use for a function or static.
    • no_mangle — Disables symbol name encoding.
    • used — Forces the compiler to keep a static item in the output object file.
    • crate_name — Specifies the crate name.
  • Code generation
    • inline — Hint to inline code.
    • cold — Hint that a function is unlikely to be called.
    • no_builtins — Disables use of certain built-in functions.
    • target_feature — Configure platform-specific code generation.
    • track_caller - Pass the parent call location to std::panic::Location::caller().
    • instruction_set - Specify the instruction set used to generate a functions code
  • Documentation
  • Preludes
  • Modules
    • path — Specifies the filename for a module.
  • Limits
  • Runtime
  • Features
    • feature — Used to enable unstable or experimental compiler features. See The Unstable Book for features implemented in rustc.
  • Type System
    • non_exhaustive — Indicate that a type will have more fields/variants added in future.
  • Debugger

Testing attributes

The following attributes are used for specifying functions for performing tests. Compiling a crate in “test” mode enables building the test functions along with a test harness for executing the tests. Enabling the test mode also enables the test conditional compilation option.

The test attribute

The test attribute marks a function to be executed as a test. These functions are only compiled when in test mode. Test functions must be free, monomorphic functions that take no arguments, and the return type must implement the Termination trait, for example:

  • ()
  • Result<T, E> where T: Termination, E: Debug
  • !

Note: The test mode is enabled by passing the --test argument to rustc or using cargo test.

The test harness calls the returned value’s report method, and classifies the test as passed or failed depending on whether the resulting ExitCode represents successful termination. In particular:

  • Tests that return () pass as long as they terminate and do not panic.
  • Tests that return a Result<(), E> pass as long as they return Ok(()).
  • Tests that return ExitCode::SUCCESS pass, and tests that return ExitCode::FAILURE fail.
  • Tests that do not terminate neither pass nor fail.
#![allow(unused)]
fn main() {
use std::io;
fn setup_the_thing() -> io::Result<i32> { Ok(1) }
fn do_the_thing(s: &i32) -> io::Result<()> { Ok(()) }
#[test]
fn test_the_thing() -> io::Result<()> {
    let state = setup_the_thing()?; // expected to succeed
    do_the_thing(&state)?;          // expected to succeed
    Ok(())
}
}

The ignore attribute

A function annotated with the test attribute can also be annotated with the ignore attribute. The ignore attribute tells the test harness to not execute that function as a test. It will still be compiled when in test mode.

The ignore attribute may optionally be written with the MetaNameValueStr syntax to specify a reason why the test is ignored.

#![allow(unused)]
fn main() {
#[test]
#[ignore = "not yet implemented"]
fn mytest() {
    // …
}
}

Note: The rustc test harness supports the --include-ignored flag to force ignored tests to be run.

The should_panic attribute

A function annotated with the test attribute that returns () can also be annotated with the should_panic attribute. The should_panic attribute makes the test only pass if it actually panics.

The should_panic attribute may optionally take an input string that must appear within the panic message. If the string is not found in the message, then the test will fail. The string may be passed using the MetaNameValueStr syntax or the MetaListNameValueStr syntax with an expected field.

#![allow(unused)]
fn main() {
#[test]
#[should_panic(expected = "values don't match")]
fn mytest() {
    assert_eq!(1, 2, "values don't match");
}
}

Derive

The derive attribute allows new items to be automatically generated for data structures. It uses the MetaListPaths syntax to specify a list of traits to implement or paths to derive macros to process.

For example, the following will create an impl item for the PartialEq and Clone traits for Foo, and the type parameter T will be given the PartialEq or Clone constraints for the appropriate impl:

#![allow(unused)]
fn main() {
#[derive(PartialEq, Clone)]
struct Foo<T> {
    a: i32,
    b: T,
}
}

The generated impl for PartialEq is equivalent to

#![allow(unused)]
fn main() {
struct Foo<T> { a: i32, b: T }
impl<T: PartialEq> PartialEq for Foo<T> {
    fn eq(&self, other: &Foo<T>) -> bool {
        self.a == other.a && self.b == other.b
    }
}
}

You can implement derive for your own traits through procedural macros.

The automatically_derived attribute

The automatically_derived attribute is automatically added to implementations created by the derive attribute for built-in traits. It has no direct effect, but it may be used by tools and diagnostic lints to detect these automatically generated implementations.

Diagnostic attributes

The following attributes are used for controlling or generating diagnostic messages during compilation.

Lint check attributes

A lint check names a potentially undesirable coding pattern, such as unreachable code or omitted documentation. The lint attributes allow, expect, warn, deny, and forbid use the MetaListPaths syntax to specify a list of lint names to change the lint level for the entity to which the attribute applies.

For any lint check C:

  • #[allow(C)] overrides the check for C so that violations will go unreported.
  • #[expect(C)] indicates that lint C is expected to be emitted. The attribute will suppress the emission of C or issue a warning, if the expectation is unfulfilled.
  • #[warn(C)] warns about violations of C but continues compilation.
  • #[deny(C)] signals an error after encountering a violation of C,
  • #[forbid(C)] is the same as deny(C), but also forbids changing the lint level afterwards,

Note: The lint checks supported by rustc can be found via rustc -W help, along with their default settings and are documented in the rustc book.

#![allow(unused)]
fn main() {
pub mod m1 {
    // Missing documentation is ignored here
    #[allow(missing_docs)]
    pub fn undocumented_one() -> i32 { 1 }

    // Missing documentation signals a warning here
    #[warn(missing_docs)]
    pub fn undocumented_too() -> i32 { 2 }

    // Missing documentation signals an error here
    #[deny(missing_docs)]
    pub fn undocumented_end() -> i32 { 3 }
}
}

Lint attributes can override the level specified from a previous attribute, as long as the level does not attempt to change a forbidden lint. Previous attributes are those from a higher level in the syntax tree, or from a previous attribute on the same entity as listed in left-to-right source order.

This example shows how one can use allow and warn to toggle a particular check on and off:

#![allow(unused)]
fn main() {
#[warn(missing_docs)]
pub mod m2 {
    #[allow(missing_docs)]
    pub mod nested {
        // Missing documentation is ignored here
        pub fn undocumented_one() -> i32 { 1 }

        // Missing documentation signals a warning here,
        // despite the allow above.
        #[warn(missing_docs)]
        pub fn undocumented_two() -> i32 { 2 }
    }

    // Missing documentation signals a warning here
    pub fn undocumented_too() -> i32 { 3 }
}
}

This example shows how one can use forbid to disallow uses of allow or expect for that lint check:

#![allow(unused)]
fn main() {
#[forbid(missing_docs)]
pub mod m3 {
    // Attempting to toggle warning signals an error here
    #[allow(missing_docs)]
    /// Returns 2.
    pub fn undocumented_too() -> i32 { 2 }
}
}

Note: rustc allows setting lint levels on the command-line, and also supports setting caps on the lints that are reported.

Lint Reasons

All lint attributes support an additional reason parameter, to give context why a certain attribute was added. This reason will be displayed as part of the lint message if the lint is emitted at the defined level.

#![allow(unused)]
fn main() {
// `keyword_idents` is allowed by default. Here we deny it to
// avoid migration of identifiers when we update the edition.
#![deny(
    keyword_idents,
    reason = "we want to avoid these idents to be future compatible"
)]

// This name was allowed in Rust's 2015 edition. We still aim to avoid
// this to be future compatible and not confuse end users.
fn dyn() {}
}

Here is another example, where the lint is allowed with a reason:

#![allow(unused)]
fn main() {
use std::path::PathBuf;

pub fn get_path() -> PathBuf {
    // The `reason` parameter on `allow` attributes acts as documentation for the reader.
    #[allow(unused_mut, reason = "this is only modified on some platforms")]
    let mut file_name = PathBuf::from("git");

    #[cfg(target_os = "windows")]
    file_name.set_extension("exe");

    file_name
}
}

The #[expect] attribute

The #[expect(C)] attribute creates a lint expectation for lint C. The expectation will be fulfilled, if a #[warn(C)] attribute at the same location would result in a lint emission. If the expectation is unfulfilled, because lint C would not be emitted, the unfulfilled_lint_expectations lint will be emitted at the attribute.

fn main() {
    // This `#[expect]` attribute creates a lint expectation, that the `unused_variables`
    // lint would be emitted by the following statement. This expectation is
    // unfulfilled, since the `question` variable is used by the `println!` macro.
    // Therefore, the `unfulfilled_lint_expectations` lint will be emitted at the
    // attribute.
    #[expect(unused_variables)]
    let question = "who lives in a pineapple under the sea?";
    println!("{question}");

    // This `#[expect]` attribute creates a lint expectation that will be fulfilled, since
    // the `answer` variable is never used. The `unused_variables` lint, that would usually
    // be emitted, is suppressed. No warning will be issued for the statement or attribute.
    #[expect(unused_variables)]
    let answer = "SpongeBob SquarePants!";
}

The lint expectation is only fulfilled by lint emissions which have been suppressed by the expect attribute. If the lint level is modified in the scope with other level attributes like allow or warn, the lint emission will be handled accordingly and the expectation will remain unfulfilled.

#![allow(unused)]
fn main() {
#[expect(unused_variables)]
fn select_song() {
    // This will emit the `unused_variables` lint at the warn level
    // as defined by the `warn` attribute. This will not fulfill the
    // expectation above the function.
    #[warn(unused_variables)]
    let song_name = "Crab Rave";

    // The `allow` attribute suppresses the lint emission. This will not
    // fulfill the expectation as it has been suppressed by the `allow`
    // attribute and not the `expect` attribute above the function.
    #[allow(unused_variables)]
    let song_creator = "Noisestorm";

    // This `expect` attribute will suppress the `unused_variables` lint emission
    // at the variable. The `expect` attribute above the function will still not
    // be fulfilled, since this lint emission has been suppressed by the local
    // expect attribute.
    #[expect(unused_variables)]
    let song_version = "Monstercat Release";
}
}

If the expect attribute contains several lints, each one is expected separately. For a lint group it’s enough if one lint inside the group has been emitted:

#![allow(unused)]
fn main() {
// This expectation will be fulfilled by the unused value inside the function
// since the emitted `unused_variables` lint is inside the `unused` lint group.
#[expect(unused)]
pub fn thoughts() {
    let unused = "I'm running out of examples";
}

pub fn another_example() {
    // This attribute creates two lint expectations. The `unused_mut` lint will be
    // suppressed and with that fulfill the first expectation. The `unused_variables`
    // wouldn't be emitted, since the variable is used. That expectation will therefore
    // be unsatisfied, and a warning will be emitted.
    #[expect(unused_mut, unused_variables)]
    let mut link = "https://www.rust-lang.org/";

    println!("Welcome to our community: {link}");
}
}

Note: The behavior of #[expect(unfulfilled_lint_expectations)] is currently defined to always generate the unfulfilled_lint_expectations lint.

Lint groups

Lints may be organized into named groups so that the level of related lints can be adjusted together. Using a named group is equivalent to listing out the lints within that group.

#![allow(unused)]
fn main() {
// This allows all lints in the "unused" group.
#[allow(unused)]
// This overrides the "unused_must_use" lint from the "unused"
// group to deny.
#[deny(unused_must_use)]
fn example() {
    // This does not generate a warning because the "unused_variables"
    // lint is in the "unused" group.
    let x = 1;
    // This generates an error because the result is unused and
    // "unused_must_use" is marked as "deny".
    std::fs::remove_file("some_file"); // ERROR: unused `Result` that must be used
}
}

There is a special group named “warnings” which includes all lints at the “warn” level. The “warnings” group ignores attribute order and applies to all lints that would otherwise warn within the entity.

#![allow(unused)]
fn main() {
unsafe fn an_unsafe_fn() {}
// The order of these two attributes does not matter.
#[deny(warnings)]
// The unsafe_code lint is normally "allow" by default.
#[warn(unsafe_code)]
fn example_err() {
    // This is an error because the `unsafe_code` warning has
    // been lifted to "deny".
    unsafe { an_unsafe_fn() } // ERROR: usage of `unsafe` block
}
}

Tool lint attributes

Tool lints allows using scoped lints, to allow, warn, deny or forbid lints of certain tools.

Tool lints only get checked when the associated tool is active. If a lint attribute, such as allow, references a nonexistent tool lint, the compiler will not warn about the nonexistent lint until you use the tool.

Otherwise, they work just like regular lint attributes:

// set the entire `pedantic` clippy lint group to warn
#![warn(clippy::pedantic)]
// silence warnings from the `filter_map` clippy lint
#![allow(clippy::filter_map)]

fn main() {
    // ...
}

// silence the `cmp_nan` clippy lint just for this function
#[allow(clippy::cmp_nan)]
fn foo() {
    // ...
}

Note: rustc currently recognizes the tool lints for “clippy” and “rustdoc”.

The deprecated attribute

The deprecated attribute marks an item as deprecated. rustc will issue warnings on usage of #[deprecated] items. rustdoc will show item deprecation, including the since version and note, if available.

The deprecated attribute has several forms:

  • deprecated — Issues a generic message.
  • deprecated = "message" — Includes the given string in the deprecation message.
  • MetaListNameValueStr syntax with two optional fields:
    • since — Specifies a version number when the item was deprecated. rustc does not currently interpret the string, but external tools like Clippy may check the validity of the value.
    • note — Specifies a string that should be included in the deprecation message. This is typically used to provide an explanation about the deprecation and preferred alternatives.

The deprecated attribute may be applied to any item, trait item, enum variant, struct field, external block item, or macro definition. It cannot be applied to trait implementation items. When applied to an item containing other items, such as a module or implementation, all child items inherit the deprecation attribute.

Here is an example:

#![allow(unused)]
fn main() {
#[deprecated(since = "5.2.0", note = "foo was rarely used. Users should instead use bar")]
pub fn foo() {}

pub fn bar() {}
}

The RFC contains motivations and more details.

The must_use attribute

The must_use attribute is used to issue a diagnostic warning when a value is not “used”. It can be applied to user-defined composite types (structs, enums, and unions), functions, and traits.

The must_use attribute may include a message by using the MetaNameValueStr syntax such as #[must_use = "example message"]. The message will be given alongside the warning.

When used on user-defined composite types, if the expression of an expression statement has that type, then the unused_must_use lint is violated.

#![allow(unused)]
fn main() {
#[must_use]
struct MustUse {
    // some fields
}

impl MustUse {
  fn new() -> MustUse { MustUse {} }
}

// Violates the `unused_must_use` lint.
MustUse::new();
}

When used on a function, if the expression of an expression statement is a call expression to that function, then the unused_must_use lint is violated.

#![allow(unused)]
fn main() {
#[must_use]
fn five() -> i32 { 5i32 }

// Violates the unused_must_use lint.
five();
}

When used on a trait declaration, a call expression of an expression statement to a function that returns an impl trait or a dyn trait of that trait violates the unused_must_use lint.

#![allow(unused)]
fn main() {
#[must_use]
trait Critical {}
impl Critical for i32 {}

fn get_critical() -> impl Critical {
    4i32
}

// Violates the `unused_must_use` lint.
get_critical();
}

When used on a function in a trait declaration, then the behavior also applies when the call expression is a function from an implementation of the trait.

#![allow(unused)]
fn main() {
trait Trait {
    #[must_use]
    fn use_me(&self) -> i32;
}

impl Trait for i32 {
    fn use_me(&self) -> i32 { 0i32 }
}

// Violates the `unused_must_use` lint.
5i32.use_me();
}

When used on a function in a trait implementation, the attribute does nothing.

Note: Trivial no-op expressions containing the value will not violate the lint. Examples include wrapping the value in a type that does not implement Drop and then not using that type and being the final expression of a block expression that is not used.

#![allow(unused)]
fn main() {
#[must_use]
fn five() -> i32 { 5i32 }

// None of these violate the unused_must_use lint.
(five(),);
Some(five());
{ five() };
if true { five() } else { 0i32 };
match true {
    _ => five()
};
}

Note: It is idiomatic to use a let statement with a pattern of _ when a must-used value is purposely discarded.

#![allow(unused)]
fn main() {
#[must_use]
fn five() -> i32 { 5i32 }

// Does not violate the unused_must_use lint.
let _ = five();
}

The diagnostic tool attribute namespace

The #[diagnostic] attribute namespace is a home for attributes to influence compile-time error messages. The hints provided by these attributes are not guaranteed to be used. Unknown attributes in this namespace are accepted, though they may emit warnings for unused attributes. Additionally, invalid inputs to known attributes will typically be a warning (see the attribute definitions for details). This is meant to allow adding or discarding attributes and changing inputs in the future to allow changes without the need to keep the non-meaningful attributes or options working.

The diagnostic::on_unimplemented attribute

The #[diagnostic::on_unimplemented] attribute is a hint to the compiler to supplement the error message that would normally be generated in scenarios where a trait is required but not implemented on a type. The attribute should be placed on a trait declaration, though it is not an error to be located in other positions. The attribute uses the MetaListNameValueStr syntax to specify its inputs, though any malformed input to the attribute is not considered as an error to provide both forwards and backwards compatibility. The following keys have the given meaning:

  • message — The text for the top level error message.
  • label — The text for the label shown inline in the broken code in the error message.
  • note — Provides additional notes.

The note option can appear several times, which results in several note messages being emitted. If any of the other options appears several times the first occurrence of the relevant option specifies the actually used value. Any other occurrence generates an lint warning. For any other non-existing option a lint-warning is generated.

All three options accept a string as an argument, interpreted using the same formatting as a std::fmt string. Format parameters with the given named parameter will be replaced with the following text:

  • {Self} — The name of the type implementing the trait.
  • { GenericParameterName } — The name of the generic argument’s type for the given generic parameter.

Any other format parameter will generate a warning, but will otherwise be included in the string as-is.

Invalid format strings may generate a warning, but are otherwise allowed, but may not display as intended. Format specifiers may generate a warning, but are otherwise ignored.

In this example:

#[diagnostic::on_unimplemented(
    message = "My Message for `ImportantTrait<{A}>` implemented for `{Self}`",
    label = "My Label",
    note = "Note 1",
    note = "Note 2"
)]
trait ImportantTrait<A> {}

fn use_my_trait(_: impl ImportantTrait<i32>) {}

fn main() {
    use_my_trait(String::new());
}

the compiler may generate an error message which looks like this:

error[E0277]: My Message for `ImportantTrait<i32>` implemented for `String`
  --> src/main.rs:14:18
   |
14 |     use_my_trait(String::new());
   |     ------------ ^^^^^^^^^^^^^ My Label
   |     |
   |     required by a bound introduced by this call
   |
   = help: the trait `ImportantTrait<i32>` is not implemented for `String`
   = note: Note 1
   = note: Note 2

Code generation attributes

The following attributes are used for controlling code generation.

Optimization hints

The cold and inline attributes give suggestions to generate code in a way that may be faster than what it would do without the hint. The attributes are only hints, and may be ignored.

Both attributes can be used on functions. When applied to a function in a trait, they apply only to that function when used as a default function for a trait implementation and not to all trait implementations. The attributes have no effect on a trait function without a body.

The inline attribute

The inline attribute suggests that a copy of the attributed function should be placed in the caller, rather than generating code to call the function where it is defined.

Note: The rustc compiler automatically inlines functions based on internal heuristics. Incorrectly inlining functions can make the program slower, so this attribute should be used with care.

There are three ways to use the inline attribute:

  • #[inline] suggests performing an inline expansion.
  • #[inline(always)] suggests that an inline expansion should always be performed.
  • #[inline(never)] suggests that an inline expansion should never be performed.

Note: #[inline] in every form is a hint, with no requirements on the language to place a copy of the attributed function in the caller.

The cold attribute

The cold attribute suggests that the attributed function is unlikely to be called.

The no_builtins attribute

The no_builtins attribute may be applied at the crate level to disable optimizing certain code patterns to invocations of library functions that are assumed to exist.

The target_feature attribute

The target_feature attribute may be applied to a function to enable code generation of that function for specific platform architecture features. It uses the MetaListNameValueStr syntax with a single key of enable whose value is a string of comma-separated feature names to enable.

#![allow(unused)]
fn main() {
#[cfg(target_feature = "avx2")]
#[target_feature(enable = "avx2")]
unsafe fn foo_avx2() {}
}

Each target architecture has a set of features that may be enabled. It is an error to specify a feature for a target architecture that the crate is not being compiled for.

It is undefined behavior to call a function that is compiled with a feature that is not supported on the current platform the code is running on, except if the platform explicitly documents this to be safe.

Functions marked with target_feature are not inlined into a context that does not support the given features. The #[inline(always)] attribute may not be used with a target_feature attribute.

Available features

The following is a list of the available feature names.

x86 or x86_64

Executing code with unsupported features is undefined behavior on this platform. Hence this platform requires that #[target_feature] is only applied to unsafe functions.

FeatureImplicitly EnablesDescription
adxADX — Multi-Precision Add-Carry Instruction Extensions
aessse2AES — Advanced Encryption Standard
avxsse4.2AVX — Advanced Vector Extensions
avx2avxAVX2 — Advanced Vector Extensions 2
bmi1BMI1 — Bit Manipulation Instruction Sets
bmi2BMI2 — Bit Manipulation Instruction Sets 2
cmpxchg16bcmpxchg16b — Compares and exchange 16 bytes (128 bits) of data atomically
f16cavxF16C — 16-bit floating point conversion instructions
fmaavxFMA3 — Three-operand fused multiply-add
fxsrfxsave and fxrstor — Save and restore x87 FPU, MMX Technology, and SSE State
lzcntlzcnt — Leading zeros count
movbemovbe — Move data after swapping bytes
pclmulqdqsse2pclmulqdq — Packed carry-less multiplication quadword
popcntpopcnt — Count of bits set to 1
rdrandrdrand — Read random number
rdseedrdseed — Read random seed
shasse2SHA — Secure Hash Algorithm
sseSSE — Streaming SIMD Extensions
sse2sseSSE2 — Streaming SIMD Extensions 2
sse3sse2SSE3 — Streaming SIMD Extensions 3
sse4.1ssse3SSE4.1 — Streaming SIMD Extensions 4.1
sse4.2sse4.1SSE4.2 — Streaming SIMD Extensions 4.2
ssse3sse3SSSE3 — Supplemental Streaming SIMD Extensions 3
xsavexsave — Save processor extended states
xsavecxsavec — Save processor extended states with compaction
xsaveoptxsaveopt — Save processor extended states optimized
xsavesxsaves — Save processor extended states supervisor

aarch64

This platform requires that #[target_feature] is only applied to unsafe functions.

Further documentation on these features can be found in the ARM Architecture Reference Manual, or elsewhere on developer.arm.com.

Note: The following pairs of features should both be marked as enabled or disabled together if used:

  • paca and pacg, which LLVM currently implements as one feature.
FeatureImplicitly EnablesFeature Name
aesneonFEAT_AES & FEAT_PMULL — Advanced SIMD AES & PMULL instructions
bf16FEAT_BF16 — BFloat16 instructions
btiFEAT_BTI — Branch Target Identification
crcFEAT_CRC — CRC32 checksum instructions
ditFEAT_DIT — Data Independent Timing instructions
dotprodFEAT_DotProd — Advanced SIMD Int8 dot product instructions
dpbFEAT_DPB — Data cache clean to point of persistence
dpb2FEAT_DPB2 — Data cache clean to point of deep persistence
f32mmsveFEAT_F32MM — SVE single-precision FP matrix multiply instruction
f64mmsveFEAT_F64MM — SVE double-precision FP matrix multiply instruction
fcmaneonFEAT_FCMA — Floating point complex number support
fhmfp16FEAT_FHM — Half-precision FP FMLAL instructions
flagmFEAT_FlagM — Conditional flag manipulation
fp16neonFEAT_FP16 — Half-precision FP data processing
frinttsFEAT_FRINTTS — Floating-point to int helper instructions
i8mmFEAT_I8MM — Int8 Matrix Multiplication
jsconvneonFEAT_JSCVT — JavaScript conversion instruction
lseFEAT_LSE — Large System Extension
lorFEAT_LOR — Limited Ordering Regions extension
mteFEAT_MTE & FEAT_MTE2 — Memory Tagging Extension
neonFEAT_FP & FEAT_AdvSIMD — Floating Point and Advanced SIMD extension
panFEAT_PAN — Privileged Access-Never extension
pacaFEAT_PAuth — Pointer Authentication (address authentication)
pacgFEAT_PAuth — Pointer Authentication (generic authentication)
pmuv3FEAT_PMUv3 — Performance Monitors extension (v3)
randFEAT_RNG — Random Number Generator
rasFEAT_RAS & FEAT_RASv1p1 — Reliability, Availability and Serviceability extension
rcpcFEAT_LRCPC — Release consistent Processor Consistent
rcpc2rcpcFEAT_LRCPC2 — RcPc with immediate offsets
rdmFEAT_RDM — Rounding Double Multiply accumulate
sbFEAT_SB — Speculation Barrier
sha2neonFEAT_SHA1 & FEAT_SHA256 — Advanced SIMD SHA instructions
sha3sha2FEAT_SHA512 & FEAT_SHA3 — Advanced SIMD SHA instructions
sm4neonFEAT_SM3 & FEAT_SM4 — Advanced SIMD SM3/4 instructions
speFEAT_SPE — Statistical Profiling Extension
ssbsFEAT_SSBS & FEAT_SSBS2 — Speculative Store Bypass Safe
svefp16FEAT_SVE — Scalable Vector Extension
sve2sveFEAT_SVE2 — Scalable Vector Extension 2
sve2-aessve2, aesFEAT_SVE_AES — SVE AES instructions
sve2-sm4sve2, sm4FEAT_SVE_SM4 — SVE SM4 instructions
sve2-sha3sve2, sha3FEAT_SVE_SHA3 — SVE SHA3 instructions
sve2-bitpermsve2FEAT_SVE_BitPerm — SVE Bit Permute
tmeFEAT_TME — Transactional Memory Extension
vhFEAT_VHE — Virtualization Host Extensions

riscv32 or riscv64

This platform requires that #[target_feature] is only applied to unsafe functions.

Further documentation on these features can be found in their respective specification. Many specifications are described in the RISC-V ISA Manual or in another manual hosted on the RISC-V GitHub Account.

FeatureImplicitly EnablesDescription
aA — Atomic instructions
cC — Compressed instructions
mM — Integer Multiplication and Division instructions
zbzba, zbc, zbsZb — Bit Manipulation instructions
zbaZba — Address Generation instructions
zbbZbb — Basic bit-manipulation
zbcZbc — Carry-less multiplication
zbkbZbkb — Bit Manipulation Instructions for Cryptography
zbkcZbkc — Carry-less multiplication for Cryptography
zbkxZbkx — Crossbar permutations
zbsZbs — Single-bit instructions
zkzkn, zkr, zks, zkt, zbkb, zbkc, zkbxZk — Scalar Cryptography
zknzknd, zkne, zknh, zbkb, zbkc, zkbxZkn — NIST Algorithm suite extension
zkndZknd — NIST Suite: AES Decryption
zkneZkne — NIST Suite: AES Encryption
zknhZknh — NIST Suite: Hash Function Instructions
zkrZkr — Entropy Source Extension
zkszksed, zksh, zbkb, zbkc, zkbxZks — ShangMi Algorithm Suite
zksedZksed — ShangMi Suite: SM4 Block Cipher Instructions
zkshZksh — ShangMi Suite: SM3 Hash Function Instructions
zktZkt — Data Independent Execution Latency Subset

wasm32 or wasm64

#[target_feature] may be used with both safe and unsafe functions on Wasm platforms. It is impossible to cause undefined behavior via the #[target_feature] attribute because attempting to use instructions unsupported by the Wasm engine will fail at load time without the risk of being interpreted in a way different from what the compiler expected.

Additional information

See the target_feature conditional compilation option for selectively enabling or disabling compilation of code based on compile-time settings. Note that this option is not affected by the target_feature attribute, and is only driven by the features enabled for the entire crate.

See the is_x86_feature_detected or is_aarch64_feature_detected macros in the standard library for runtime feature detection on these platforms.

Note: rustc has a default set of features enabled for each target and CPU. The CPU may be chosen with the -C target-cpu flag. Individual features may be enabled or disabled for an entire crate with the -C target-feature flag.

The track_caller attribute

The track_caller attribute may be applied to any function with "Rust" ABI with the exception of the entry point fn main. When applied to functions and methods in trait declarations, the attribute applies to all implementations. If the trait provides a default implementation with the attribute, then the attribute also applies to override implementations.

When applied to a function in an extern block the attribute must also be applied to any linked implementations, otherwise undefined behavior results. When applied to a function which is made available to an extern block, the declaration in the extern block must also have the attribute, otherwise undefined behavior results.

Behavior

Applying the attribute to a function f allows code within f to get a hint of the Location of the “topmost” tracked call that led to f’s invocation. At the point of observation, an implementation behaves as if it walks up the stack from f’s frame to find the nearest frame of an unattributed function outer, and it returns the Location of the tracked call in outer.

#![allow(unused)]
fn main() {
#[track_caller]
fn f() {
    println!("{}", std::panic::Location::caller());
}
}

Note: core provides core::panic::Location::caller for observing caller locations. It wraps the core::intrinsics::caller_location intrinsic implemented by rustc.

Note: because the resulting Location is a hint, an implementation may halt its walk up the stack early. See Limitations for important caveats.

Examples

When f is called directly by calls_f, code in f observes its callsite within calls_f:

#![allow(unused)]
fn main() {
#[track_caller]
fn f() {
    println!("{}", std::panic::Location::caller());
}
fn calls_f() {
    f(); // <-- f() prints this location
}
}

When f is called by another attributed function g which is in turn called by calls_g, code in both f and g observes g’s callsite within calls_g:

#![allow(unused)]
fn main() {
#[track_caller]
fn f() {
    println!("{}", std::panic::Location::caller());
}
#[track_caller]
fn g() {
    println!("{}", std::panic::Location::caller());
    f();
}

fn calls_g() {
    g(); // <-- g() prints this location twice, once itself and once from f()
}
}

When g is called by another attributed function h which is in turn called by calls_h, all code in f, g, and h observes h’s callsite within calls_h:

#![allow(unused)]
fn main() {
#[track_caller]
fn f() {
    println!("{}", std::panic::Location::caller());
}
#[track_caller]
fn g() {
    println!("{}", std::panic::Location::caller());
    f();
}
#[track_caller]
fn h() {
    println!("{}", std::panic::Location::caller());
    g();
}

fn calls_h() {
    h(); // <-- prints this location three times, once itself, once from g(), once from f()
}
}

And so on.

Limitations

This information is a hint and implementations are not required to preserve it.

In particular, coercing a function with #[track_caller] to a function pointer creates a shim which appears to observers to have been called at the attributed function’s definition site, losing actual caller information across virtual calls. A common example of this coercion is the creation of a trait object whose methods are attributed.

Note: The aforementioned shim for function pointers is necessary because rustc implements track_caller in a codegen context by appending an implicit parameter to the function ABI, but this would be unsound for an indirect call because the parameter is not a part of the function’s type and a given function pointer type may or may not refer to a function with the attribute. The creation of a shim hides the implicit parameter from callers of the function pointer, preserving soundness.

The instruction_set attribute

The instruction_set attribute may be applied to a function to control which instruction set the function will be generated for. This allows mixing more than one instruction set in a single program on CPU architectures that support it. It uses the MetaListPath syntax, and a path comprised of the architecture family name and instruction set name.

It is a compilation error to use the instruction_set attribute on a target that does not support it.

On ARM

For the ARMv4T and ARMv5te architectures, the following are supported:

  • arm::a32 — Generate the function as A32 “ARM” code.
  • arm::t32 — Generate the function as T32 “Thumb” code.
#[instruction_set(arm::a32)]
fn foo_arm_code() {}

#[instruction_set(arm::t32)]
fn bar_thumb_code() {}

Using the instruction_set attribute has the following effects:

  • If the address of the function is taken as a function pointer, the low bit of the address will be set to 0 (arm) or 1 (thumb) depending on the instruction set.
  • Any inline assembly in the function must use the specified instruction set instead of the target default.

Limits

The following attributes affect compile-time limits.

The recursion_limit attribute

The recursion_limit attribute may be applied at the crate level to set the maximum depth for potentially infinitely-recursive compile-time operations like macro expansion or auto-dereference. It uses the MetaNameValueStr syntax to specify the recursion depth.

Note: The default in rustc is 128.

#![allow(unused)]
#![recursion_limit = "4"]

fn main() {
macro_rules! a {
    () => { a!(1); };
    (1) => { a!(2); };
    (2) => { a!(3); };
    (3) => { a!(4); };
    (4) => { };
}

// This fails to expand because it requires a recursion depth greater than 4.
a!{}
}
#![allow(unused)]
#![recursion_limit = "1"]

fn main() {
// This fails because it requires two recursive steps to auto-dereference.
(|_: &u8| {})(&&&1);
}

The type_length_limit attribute

Note: This limit is only enforced when the nightly -Zenforce-type-length-limit flag is active.

For more information, see https://github.com/rust-lang/rust/pull/127670.

The type_length_limit attribute limits the maximum number of type substitutions made when constructing a concrete type during monomorphization. It is applied at the crate level, and uses the MetaNameValueStr syntax to set the limit based on the number of type substitutions.

Note: The default in rustc is 1048576.

#![type_length_limit = "4"]

fn f<T>(x: T) {}

// This fails to compile because monomorphizing to
// `f::<((((i32,), i32), i32), i32)>` requires more than 4 type elements.
f(((((1,), 2), 3), 4));

Type system attributes

The following attributes are used for changing how a type can be used.

The non_exhaustive attribute

The non_exhaustive attribute indicates that a type or variant may have more fields or variants added in the future. It can be applied to structs, enums, and enum variants.

The non_exhaustive attribute uses the MetaWord syntax and thus does not take any inputs.

Within the defining crate, non_exhaustive has no effect.

#![allow(unused)]
fn main() {
#[non_exhaustive]
pub struct Config {
    pub window_width: u16,
    pub window_height: u16,
}

#[non_exhaustive]
pub struct Token;

#[non_exhaustive]
pub struct Id(pub u64);

#[non_exhaustive]
pub enum Error {
    Message(String),
    Other,
}

pub enum Message {
    #[non_exhaustive] Send { from: u32, to: u32, contents: String },
    #[non_exhaustive] Reaction(u32),
    #[non_exhaustive] Quit,
}

// Non-exhaustive structs can be constructed as normal within the defining crate.
let config = Config { window_width: 640, window_height: 480 };
let token = Token;
let id = Id(4);

// Non-exhaustive structs can be matched on exhaustively within the defining crate.
let Config { window_width, window_height } = config;
let Token = token;
let Id(id_number) = id;

let error = Error::Other;
let message = Message::Reaction(3);

// Non-exhaustive enums can be matched on exhaustively within the defining crate.
match error {
    Error::Message(ref s) => { },
    Error::Other => { },
}

match message {
    // Non-exhaustive variants can be matched on exhaustively within the defining crate.
    Message::Send { from, to, contents } => { },
    Message::Reaction(id) => { },
    Message::Quit => { },
}
}

Outside of the defining crate, types annotated with non_exhaustive have limitations that preserve backwards compatibility when new fields or variants are added.

Non-exhaustive types cannot be constructed outside of the defining crate:

  • Non-exhaustive variants (struct or enum variant) cannot be constructed with a StructExpression (including with functional update syntax).
  • The implicitly defined same-named constant of a unit-like struct, or the same-named constructor function of a tuple struct, has a visibility no greater than pub(crate). That is, if the struct’s visibility is pub, then the constant or constructor’s visibility is pub(crate), and otherwise the visibility of the two items is the same (as is the case without #[non_exhaustive]).
  • enum instances can be constructed.

The following examples of construction do not compile when outside the defining crate:

// These are types defined in an upstream crate that have been annotated as
// `#[non_exhaustive]`.
use upstream::{Config, Token, Id, Error, Message};

// Cannot construct an instance of `Config`; if new fields were added in
// a new version of `upstream` then this would fail to compile, so it is
// disallowed.
let config = Config { window_width: 640, window_height: 480 };

// Cannot construct an instance of `Token`; if new fields were added, then
// it would not be a unit-like struct any more, so the same-named constant
// created by it being a unit-like struct is not public outside the crate;
// this code fails to compile.
let token = Token;

// Cannot construct an instance of `Id`; if new fields were added, then
// its constructor function signature would change, so its constructor
// function is not public outside the crate; this code fails to compile.
let id = Id(5);

// Can construct an instance of `Error`; new variants being introduced would
// not result in this failing to compile.
let error = Error::Message("foo".to_string());

// Cannot construct an instance of `Message::Send` or `Message::Reaction`;
// if new fields were added in a new version of `upstream` then this would
// fail to compile, so it is disallowed.
let message = Message::Send { from: 0, to: 1, contents: "foo".to_string(), };
let message = Message::Reaction(0);

// Cannot construct an instance of `Message::Quit`; if this were converted to
// a tuple-variant `upstream` then this would fail to compile.
let message = Message::Quit;

There are limitations when matching on non-exhaustive types outside of the defining crate:

  • When pattern matching on a non-exhaustive variant (struct or enum variant), a StructPattern must be used which must include a ... A tuple variant’s constructor’s visibility is reduced to be no greater than pub(crate).
  • When pattern matching on a non-exhaustive enum, matching on a variant does not contribute towards the exhaustiveness of the arms.

The following examples of matching do not compile when outside the defining crate:

// These are types defined in an upstream crate that have been annotated as
// `#[non_exhaustive]`.
use upstream::{Config, Token, Id, Error, Message};

// Cannot match on a non-exhaustive enum without including a wildcard arm.
match error {
  Error::Message(ref s) => { },
  Error::Other => { },
  // would compile with: `_ => {},`
}

// Cannot match on a non-exhaustive struct without a wildcard.
if let Ok(Config { window_width, window_height }) = config {
    // would compile with: `..`
}

// Cannot match a non-exhaustive unit-like or tuple struct except by using
// braced struct syntax with a wildcard.
// This would compile as `let Token { .. } = token;`
let Token = token;
// This would compile as `let Id { 0: id_number, .. } = id;`
let Id(id_number) = id;

match message {
  // Cannot match on a non-exhaustive struct enum variant without including a wildcard.
  Message::Send { from, to, contents } => { },
  // Cannot match on a non-exhaustive tuple or unit enum variant.
  Message::Reaction(type) => { },
  Message::Quit => { },
}

It’s also not allowed to cast non-exhaustive types from foreign crates.

use othercrate::NonExhaustiveEnum;

// Cannot cast a non-exhaustive enum outside of its defining crate.
let _ = NonExhaustiveEnum::default() as u8;

Non-exhaustive types are always considered inhabited in downstream crates.

Debugger attributes

The following attributes are used for enhancing the debugging experience when using third-party debuggers like GDB or WinDbg.

The debugger_visualizer attribute

The debugger_visualizer attribute can be used to embed a debugger visualizer file into the debug information. This enables an improved debugger experience for displaying values in the debugger. It uses the MetaListNameValueStr syntax to specify its inputs, and must be specified as a crate attribute.

Using debugger_visualizer with Natvis

Natvis is an XML-based framework for Microsoft debuggers (such as Visual Studio and WinDbg) that uses declarative rules to customize the display of types. For detailed information on the Natvis format, refer to Microsoft’s Natvis documentation.

This attribute only supports embedding Natvis files on -windows-msvc targets.

The path to the Natvis file is specified with the natvis_file key, which is a path relative to the crate source file:

#![debugger_visualizer(natvis_file = "Rectangle.natvis")]

struct FancyRect {
    x: f32,
    y: f32,
    dx: f32,
    dy: f32,
}

fn main() {
    let fancy_rect = FancyRect { x: 10.0, y: 10.0, dx: 5.0, dy: 5.0 };
    println!("set breakpoint here");
}

and Rectangle.natvis contains:

<?xml version="1.0" encoding="utf-8"?>
<AutoVisualizer xmlns="http://schemas.microsoft.com/vstudio/debugger/natvis/2010">
    <Type Name="foo::FancyRect">
      <DisplayString>({x},{y}) + ({dx}, {dy})</DisplayString>
      <Expand>
        <Synthetic Name="LowerLeft">
          <DisplayString>({x}, {y})</DisplayString>
        </Synthetic>
        <Synthetic Name="UpperLeft">
          <DisplayString>({x}, {y + dy})</DisplayString>
        </Synthetic>
        <Synthetic Name="UpperRight">
          <DisplayString>({x + dx}, {y + dy})</DisplayString>
        </Synthetic>
        <Synthetic Name="LowerRight">
          <DisplayString>({x + dx}, {y})</DisplayString>
        </Synthetic>
      </Expand>
    </Type>
</AutoVisualizer>

When viewed under WinDbg, the fancy_rect variable would be shown as follows:

> Variables:
  > fancy_rect: (10.0, 10.0) + (5.0, 5.0)
    > LowerLeft: (10.0, 10.0)
    > UpperLeft: (10.0, 15.0)
    > UpperRight: (15.0, 15.0)
    > LowerRight: (15.0, 10.0)

Using debugger_visualizer with GDB

GDB supports the use of a structured Python script, called a pretty printer, that describes how a type should be visualized in the debugger view. For detailed information on pretty printers, refer to GDB’s pretty printing documentation.

Embedded pretty printers are not automatically loaded when debugging a binary under GDB. There are two ways to enable auto-loading embedded pretty printers:

  1. Launch GDB with extra arguments to explicitly add a directory or binary to the auto-load safe path: gdb -iex "add-auto-load-safe-path safe-path path/to/binary" path/to/binary For more information, see GDB’s auto-loading documentation.
  2. Create a file named gdbinit under $HOME/.config/gdb (you may need to create the directory if it doesn’t already exist). Add the following line to that file: add-auto-load-safe-path path/to/binary.

These scripts are embedded using the gdb_script_file key, which is a path relative to the crate source file.

#![debugger_visualizer(gdb_script_file = "printer.py")]

struct Person {
    name: String,
    age: i32,
}

fn main() {
    let bob = Person { name: String::from("Bob"), age: 10 };
    println!("set breakpoint here");
}

and printer.py contains:

import gdb

class PersonPrinter:
    "Print a Person"

    def __init__(self, val):
        self.val = val
        self.name = val["name"]
        self.age = int(val["age"])

    def to_string(self):
        return "{} is {} years old.".format(self.name, self.age)

def lookup(val):
    lookup_tag = val.type.tag
    if lookup_tag is None:
        return None
    if "foo::Person" == lookup_tag:
        return PersonPrinter(val)

    return None

gdb.current_objfile().pretty_printers.append(lookup)

When the crate’s debug executable is passed into GDB1, print bob will display:

"Bob" is 10 years old.
1

Note: This assumes you are using the rust-gdb script which configures pretty-printers for standard library types like String.

The collapse_debuginfo attribute

The collapse_debuginfo attribute controls whether code locations from a macro definition are collapsed into a single location associated with the macro’s call site, when generating debuginfo for code calling this macro.

The attribute uses the MetaListIdents syntax to specify its inputs, and can only be applied to macro definitions.

Accepted options:

  • #[collapse_debuginfo(yes)] — code locations in debuginfo are collapsed.
  • #[collapse_debuginfo(no)] — code locations in debuginfo are not collapsed.
  • #[collapse_debuginfo(external)] — code locations in debuginfo are collapsed only if the macro comes from a different crate.

The external behavior is the default for macros that don’t have this attribute, unless they are built-in macros. For built-in macros the default is yes.

Note: rustc has a -C collapse-macro-debuginfo CLI option to override both the default collapsing behavior and #[collapse_debuginfo] attributes.

#![allow(unused)]
fn main() {
#[collapse_debuginfo(yes)]
macro_rules! example {
    () => {
        println!("hello!");
    };
}
}

Statements and expressions

Rust is primarily an expression language. This means that most forms of value-producing or effect-causing evaluation are directed by the uniform syntax category of expressions. Each kind of expression can typically nest within each other kind of expression, and rules for evaluation of expressions involve specifying both the value produced by the expression and the order in which its sub-expressions are themselves evaluated.

In contrast, statements serve mostly to contain and explicitly sequence expression evaluation.

Statements

Syntax
Statement :
      ;
   | Item
   | LetStatement
   | ExpressionStatement
   | MacroInvocationSemi

A statement is a component of a block, which is in turn a component of an outer expression or function.

Rust has two kinds of statement: declaration statements and expression statements.

Declaration statements

A declaration statement is one that introduces one or more names into the enclosing statement block. The declared names may denote new variables or new items.

The two kinds of declaration statements are item declarations and let statements.

Item declarations

An item declaration statement has a syntactic form identical to an item declaration within a module. Declaring an item within a statement block restricts its scope to the block containing the statement. The item is not given a canonical path nor are any sub-items it may declare. The exception to this is that associated items defined by implementations are still accessible in outer scopes as long as the item and, if applicable, trait are accessible. It is otherwise identical in meaning to declaring the item inside a module.

There is no implicit capture of the containing function’s generic parameters, parameters, and local variables. For example, inner may not access outer_var.

#![allow(unused)]
fn main() {
fn outer() {
  let outer_var = true;

  fn inner() { /* outer_var is not in scope here */ }

  inner();
}
}

let statements

Syntax
LetStatement :
   OuterAttribute* let PatternNoTopAlt ( : Type )? (= Expression ( else BlockExpression) ? ) ? ;

† When an else block is specified, the Expression must not be a LazyBooleanExpression, or end with a }.

A let statement introduces a new set of variables, given by a pattern. The pattern is followed optionally by a type annotation and then either ends, or is followed by an initializer expression plus an optional else block. When no type annotation is given, the compiler will infer the type, or signal an error if insufficient type information is available for definite inference. Any variables introduced by a variable declaration are visible from the point of declaration until the end of the enclosing block scope, except when they are shadowed by another variable declaration.

If an else block is not present, the pattern must be irrefutable. If an else block is present, the pattern may be refutable. If the pattern does not match (this requires it to be refutable), the else block is executed. The else block must always diverge (evaluate to the never type).

#![allow(unused)]
fn main() {
let (mut v, w) = (vec![1, 2, 3], 42); // The bindings may be mut or const
let Some(t) = v.pop() else { // Refutable patterns require an else block
    panic!(); // The else block must diverge
};
let [u, v] = [v[0], v[1]] else { // This pattern is irrefutable, so the compiler
                                 // will lint as the else block is redundant.
    panic!();
};
}

Expression statements

Syntax
ExpressionStatement :
      ExpressionWithoutBlock ;
   | ExpressionWithBlock ;?

An expression statement is one that evaluates an expression and ignores its result. As a rule, an expression statement’s purpose is to trigger the effects of evaluating its expression.

An expression that consists of only a block expression or control flow expression, if used in a context where a statement is permitted, can omit the trailing semicolon. This can cause an ambiguity between it being parsed as a standalone statement and as a part of another expression; in this case, it is parsed as a statement. The type of ExpressionWithBlock expressions when used as statements must be the unit type.

#![allow(unused)]
fn main() {
let mut v = vec![1, 2, 3];
v.pop();          // Ignore the element returned from pop
if v.is_empty() {
    v.push(5);
} else {
    v.remove(0);
}                 // Semicolon can be omitted.
[1];              // Separate expression statement, not an indexing expression.
}

When the trailing semicolon is omitted, the result must be type ().

#![allow(unused)]
fn main() {
// bad: the block's type is i32, not ()
// Error: expected `()` because of default return type
// if true {
//   1
// }

// good: the block's type is i32
if true {
  1
} else {
  2
};
}

Attributes on Statements

Statements accept outer attributes. The attributes that have meaning on a statement are cfg, and the lint check attributes.

Expressions

Syntax
Expression :
      ExpressionWithoutBlock
   | ExpressionWithBlock

ExpressionWithoutBlock :
   OuterAttribute*
   (
         LiteralExpression
      | PathExpression
      | OperatorExpression
      | GroupedExpression
      | ArrayExpression
      | AwaitExpression
      | IndexExpression
      | TupleExpression
      | TupleIndexingExpression
      | StructExpression
      | CallExpression
      | MethodCallExpression
      | FieldExpression
      | ClosureExpression
      | AsyncBlockExpression
      | ContinueExpression
      | BreakExpression
      | RangeExpression
      | ReturnExpression
      | UnderscoreExpression
      | MacroInvocation
   )

ExpressionWithBlock :
   OuterAttribute*
   (
         BlockExpression
      | ConstBlockExpression
      | UnsafeBlockExpression
      | LoopExpression
      | IfExpression
      | IfLetExpression
      | MatchExpression
   )

An expression may have two roles: it always produces a value, and it may have effects (otherwise known as “side effects”). An expression evaluates to a value, and has effects during evaluation. Many expressions contain sub-expressions, called the operands of the expression. The meaning of each kind of expression dictates several things:

  • Whether or not to evaluate the operands when evaluating the expression
  • The order in which to evaluate the operands
  • How to combine the operands’ values to obtain the value of the expression

In this way, the structure of expressions dictates the structure of execution. Blocks are just another kind of expression, so blocks, statements, expressions, and blocks again can recursively nest inside each other to an arbitrary depth.

Note: We give names to the operands of expressions so that we may discuss them, but these names are not stable and may be changed.

Expression precedence

The precedence of Rust operators and expressions is ordered as follows, going from strong to weak. Binary Operators at the same precedence level are grouped in the order given by their associativity.

Operator/ExpressionAssociativity
Paths
Method calls
Field expressionsleft to right
Function calls, array indexing
?
Unary - * ! & &mut
asleft to right
* / %left to right
+ -left to right
<< >>left to right
&left to right
^left to right
|left to right
== != < > <= >=Require parentheses
&&left to right
||left to right
.. ..=Require parentheses
= += -= *= /= %=
&= |= ^= <<= >>=
right to left
return break closures

Evaluation order of operands

The following list of expressions all evaluate their operands the same way, as described after the list. Other expressions either don’t take operands or evaluate them conditionally as described on their respective pages.

  • Dereference expression
  • Error propagation expression
  • Negation expression
  • Arithmetic and logical binary operators
  • Comparison operators
  • Type cast expression
  • Grouped expression
  • Array expression
  • Await expression
  • Index expression
  • Tuple expression
  • Tuple index expression
  • Struct expression
  • Call expression
  • Method call expression
  • Field expression
  • Break expression
  • Range expression
  • Return expression

The operands of these expressions are evaluated prior to applying the effects of the expression. Expressions taking multiple operands are evaluated left to right as written in the source code.

Note: Which subexpressions are the operands of an expression is determined by expression precedence as per the previous section.

For example, the two next method calls will always be called in the same order:

#![allow(unused)]
fn main() {
// Using vec instead of array to avoid references
// since there is no stable owned array iterator
// at the time this example was written.
let mut one_two = vec![1, 2].into_iter();
assert_eq!(
    (1, 2),
    (one_two.next().unwrap(), one_two.next().unwrap())
);
}

Note: Since this is applied recursively, these expressions are also evaluated from innermost to outermost, ignoring siblings until there are no inner subexpressions.

Place Expressions and Value Expressions

Expressions are divided into two main categories: place expressions and value expressions; there is also a third, minor category of expressions called assignee expressions. Within each expression, operands may likewise occur in either place context or value context. The evaluation of an expression depends both on its own category and the context it occurs within.

A place expression is an expression that represents a memory location. These expressions are paths which refer to local variables, static variables, dereferences (*expr), array indexing expressions (expr[expr]), field references (expr.f) and parenthesized place expressions. All other expressions are value expressions.

A value expression is an expression that represents an actual value.

The following contexts are place expression contexts:

Note: Historically, place expressions were called lvalues and value expressions were called rvalues.

An assignee expression is an expression that appears in the left operand of an assignment expression. Explicitly, the assignee expressions are:

Arbitrary parenthesisation is permitted inside assignee expressions.

Moved and copied types

When a place expression is evaluated in a value expression context, or is bound by value in a pattern, it denotes the value held in that memory location. If the type of that value implements Copy, then the value will be copied. In the remaining situations, if that type is Sized, then it may be possible to move the value. Only the following place expressions may be moved out of:

After moving out of a place expression that evaluates to a local variable, the location is deinitialized and cannot be read from again until it is reinitialized. In all other cases, trying to use a place expression in a value expression context is an error.

Mutability

For a place expression to be assigned to, mutably borrowed, implicitly mutably borrowed, or bound to a pattern containing ref mut, it must be mutable. We call these mutable place expressions. In contrast, other place expressions are called immutable place expressions.

The following expressions can be mutable place expression contexts:

  • Mutable variables which are not currently borrowed.
  • Mutable static items.
  • Temporary values.
  • Fields: this evaluates the subexpression in a mutable place expression context.
  • Dereferences of a *mut T pointer.
  • Dereference of a variable, or field of a variable, with type &mut T. Note: This is an exception to the requirement of the next rule.
  • Dereferences of a type that implements DerefMut: this then requires that the value being dereferenced is evaluated in a mutable place expression context.
  • Array indexing of a type that implements IndexMut: this then evaluates the value being indexed, but not the index, in mutable place expression context.

Temporaries

When using a value expression in most place expression contexts, a temporary unnamed memory location is created and initialized to that value. The expression evaluates to that location instead, except if promoted to a static. The drop scope of the temporary is usually the end of the enclosing statement.

Implicit Borrows

Certain expressions will treat an expression as a place expression by implicitly borrowing it. For example, it is possible to compare two unsized slices for equality directly, because the == operator implicitly borrows its operands:

#![allow(unused)]
fn main() {
let c = [1, 2, 3];
let d = vec![1, 2, 3];
let a: &[i32];
let b: &[i32];
a = &c;
b = &d;
// ...
*a == *b;
// Equivalent form:
::std::cmp::PartialEq::eq(&*a, &*b);
}

Implicit borrows may be taken in the following expressions:

Overloading Traits

Many of the following operators and expressions can also be overloaded for other types using traits in std::ops or std::cmp. These traits also exist in core::ops and core::cmp with the same names.

Expression Attributes

Outer attributes before an expression are allowed only in a few specific cases:

They are never allowed before:

Literal expressions

Syntax
LiteralExpression :
      CHAR_LITERAL
   | STRING_LITERAL
   | RAW_STRING_LITERAL
   | BYTE_LITERAL
   | BYTE_STRING_LITERAL
   | RAW_BYTE_STRING_LITERAL
   | C_STRING_LITERAL
   | RAW_C_STRING_LITERAL
   | INTEGER_LITERAL
   | FLOAT_LITERAL
   | true | false

A literal expression is an expression consisting of a single token, rather than a sequence of tokens, that immediately and directly denotes the value it evaluates to, rather than referring to it by name or some other evaluation rule.

A literal is a form of constant expression, so is evaluated (primarily) at compile time.

Each of the lexical literal forms described earlier can make up a literal expression, as can the keywords true and false.

#![allow(unused)]
fn main() {
"hello";   // string type
'5';       // character type
5;         // integer type
}

In the descriptions below, the string representation of a token is the sequence of characters from the input which matched the token’s production in a Lexer grammar snippet.

Note: this string representation never includes a character U+000D (CR) immediately followed by U+000A (LF): this pair would have been previously transformed into a single U+000A (LF).

Escapes

The descriptions of textual literal expressions below make use of several forms of escape.

Each form of escape is characterised by:

  • an escape sequence: a sequence of characters, which always begins with U+005C (\)
  • an escaped value: either a single character or an empty sequence of characters

In the definitions of escapes below:

  • An octal digit is any of the characters in the range [0-7].
  • A hexadecimal digit is any of the characters in the ranges [0-9], [a-f], or [A-F].

Simple escapes

Each sequence of characters occurring in the first column of the following table is an escape sequence.

In each case, the escaped value is the character given in the corresponding entry in the second column.

Escape sequenceEscaped value
\0U+0000 (NUL)
\tU+0009 (HT)
\nU+000A (LF)
\rU+000D (CR)
\"U+0022 (QUOTATION MARK)
\'U+0027 (APOSTROPHE)
\\U+005C (REVERSE SOLIDUS)

8-bit escapes

The escape sequence consists of \x followed by two hexadecimal digits.

The escaped value is the character whose Unicode scalar value is the result of interpreting the final two characters in the escape sequence as a hexadecimal integer, as if by u8::from_str_radix with radix 16.

Note: the escaped value therefore has a Unicode scalar value in the range of u8.

7-bit escapes

The escape sequence consists of \x followed by an octal digit then a hexadecimal digit.

The escaped value is the character whose Unicode scalar value is the result of interpreting the final two characters in the escape sequence as a hexadecimal integer, as if by u8::from_str_radix with radix 16.

Unicode escapes

The escape sequence consists of \u{, followed by a sequence of characters each of which is a hexadecimal digit or _, followed by }.

The escaped value is the character whose Unicode scalar value is the result of interpreting the hexadecimal digits contained in the escape sequence as a hexadecimal integer, as if by u32::from_str_radix with radix 16.

Note: the permitted forms of a CHAR_LITERAL or STRING_LITERAL token ensure that there is such a character.

String continuation escapes

The escape sequence consists of \ followed immediately by U+000A (LF), and all following whitespace characters before the next non-whitespace character. For this purpose, the whitespace characters are U+0009 (HT), U+000A (LF), U+000D (CR), and U+0020 (SPACE).

The escaped value is an empty sequence of characters.

Note: The effect of this form of escape is that a string continuation skips following whitespace, including additional newlines. Thus a, b and c are equal:

#![allow(unused)]
fn main() {
let a = "foobar";
let b = "foo\
         bar";
let c = "foo\

     bar";

assert_eq!(a, b);
assert_eq!(b, c);
}

Skipping additional newlines (as in example c) is potentially confusing and unexpected. This behavior may be adjusted in the future. Until a decision is made, it is recommended to avoid relying on skipping multiple newlines with line continuations. See this issue for more information.

Character literal expressions

A character literal expression consists of a single CHAR_LITERAL token.

The expression’s type is the primitive char type.

The token must not have a suffix.

The token’s literal content is the sequence of characters following the first U+0027 (') and preceding the last U+0027 (') in the string representation of the token.

The literal expression’s represented character is derived from the literal content as follows:

  • If the literal content is one of the following forms of escape sequence, the represented character is the escape sequence’s escaped value:

  • Otherwise the represented character is the single character that makes up the literal content.

The expression’s value is the char corresponding to the represented character’s Unicode scalar value.

Note: the permitted forms of a CHAR_LITERAL token ensure that these rules always produce a single character.

Examples of character literal expressions:

#![allow(unused)]
fn main() {
'R';                               // R
'\'';                              // '
'\x52';                            // R
'\u{00E6}';                        // LATIN SMALL LETTER AE (U+00E6)
}

String literal expressions

A string literal expression consists of a single STRING_LITERAL or RAW_STRING_LITERAL token.

The expression’s type is a shared reference (with static lifetime) to the primitive str type. That is, the type is &'static str.

The token must not have a suffix.

The token’s literal content is the sequence of characters following the first U+0022 (") and preceding the last U+0022 (") in the string representation of the token.

The literal expression’s represented string is a sequence of characters derived from the literal content as follows:

The expression’s value is a reference to a statically allocated str containing the UTF-8 encoding of the represented string.

Examples of string literal expressions:

#![allow(unused)]
fn main() {
"foo"; r"foo";                     // foo
"\"foo\""; r#""foo""#;             // "foo"

"foo #\"# bar";
r##"foo #"# bar"##;                // foo #"# bar

"\x52"; "R"; r"R";                 // R
"\\x52"; r"\x52";                  // \x52
}

Byte literal expressions

A byte literal expression consists of a single BYTE_LITERAL token.

The expression’s type is the primitive u8 type.

The token must not have a suffix.

The token’s literal content is the sequence of characters following the first U+0027 (') and preceding the last U+0027 (') in the string representation of the token.

The literal expression’s represented character is derived from the literal content as follows:

  • If the literal content is one of the following forms of escape sequence, the represented character is the escape sequence’s escaped value:

  • Otherwise the represented character is the single character that makes up the literal content.

The expression’s value is the represented character’s Unicode scalar value.

Note: the permitted forms of a BYTE_LITERAL token ensure that these rules always produce a single character, whose Unicode scalar value is in the range of u8.

Examples of byte literal expressions:

#![allow(unused)]
fn main() {
b'R';                              // 82
b'\'';                             // 39
b'\x52';                           // 82
b'\xA0';                           // 160
}

Byte string literal expressions

A byte string literal expression consists of a single BYTE_STRING_LITERAL or RAW_BYTE_STRING_LITERAL token.

The expression’s type is a shared reference (with static lifetime) to an array whose element type is u8. That is, the type is &'static [u8; N], where N is the number of bytes in the represented string described below.

The token must not have a suffix.

The token’s literal content is the sequence of characters following the first U+0022 (") and preceding the last U+0022 (") in the string representation of the token.

The literal expression’s represented string is a sequence of characters derived from the literal content as follows:

The expression’s value is a reference to a statically allocated array containing the Unicode scalar values of the characters in the represented string, in the same order.

Note: the permitted forms of BYTE_STRING_LITERAL and RAW_BYTE_STRING_LITERAL tokens ensure that these rules always produce array element values in the range of u8.

Examples of byte string literal expressions:

#![allow(unused)]
fn main() {
b"foo"; br"foo";                     // foo
b"\"foo\""; br#""foo""#;             // "foo"

b"foo #\"# bar";
br##"foo #"# bar"##;                 // foo #"# bar

b"\x52"; b"R"; br"R";                // R
b"\\x52"; br"\x52";                  // \x52
}

C string literal expressions

A C string literal expression consists of a single C_STRING_LITERAL or RAW_C_STRING_LITERAL token.

The expression’s type is a shared reference (with static lifetime) to the standard library CStr type. That is, the type is &'static core::ffi::CStr.

The token must not have a suffix.

The token’s literal content is the sequence of characters following the first " and preceding the last " in the string representation of the token.

The literal expression’s represented bytes are a sequence of bytes derived from the literal content as follows:

Note: the permitted forms of C_STRING_LITERAL and RAW_C_STRING_LITERAL tokens ensure that the represented bytes never include a null byte.

The expression’s value is a reference to a statically allocated CStr whose array of bytes contains the represented bytes followed by a null byte.

Examples of C string literal expressions:

#![allow(unused)]
fn main() {
c"foo"; cr"foo";                     // foo
c"\"foo\""; cr#""foo""#;             // "foo"

c"foo #\"# bar";
cr##"foo #"# bar"##;                 // foo #"# bar

c"\x52"; c"R"; cr"R";                // R
c"\\x52"; cr"\x52";                  // \x52

c"æ";                                // LATIN SMALL LETTER AE (U+00E6)
c"\u{00E6}";                         // LATIN SMALL LETTER AE (U+00E6)
c"\xC3\xA6";                         // LATIN SMALL LETTER AE (U+00E6)

c"\xE6".to_bytes();                  // [230]
c"\u{00E6}".to_bytes();              // [195, 166]
}

Integer literal expressions

An integer literal expression consists of a single INTEGER_LITERAL token.

If the token has a suffix, the suffix must be the name of one of the primitive integer types: u8, i8, u16, i16, u32, i32, u64, i64, u128, i128, usize, or isize, and the expression has that type.

If the token has no suffix, the expression’s type is determined by type inference:

  • If an integer type can be uniquely determined from the surrounding program context, the expression has that type.

  • If the program context under-constrains the type, it defaults to the signed 32-bit integer i32.

  • If the program context over-constrains the type, it is considered a static type error.

Examples of integer literal expressions:

#![allow(unused)]
fn main() {
123;                               // type i32
123i32;                            // type i32
123u32;                            // type u32
123_u32;                           // type u32
let a: u64 = 123;                  // type u64

0xff;                              // type i32
0xff_u8;                           // type u8

0o70;                              // type i32
0o70_i16;                          // type i16

0b1111_1111_1001_0000;             // type i32
0b1111_1111_1001_0000i64;          // type i64

0usize;                            // type usize
}

The value of the expression is determined from the string representation of the token as follows:

  • An integer radix is chosen by inspecting the first two characters of the string, as follows:

    • 0b indicates radix 2
    • 0o indicates radix 8
    • 0x indicates radix 16
    • otherwise the radix is 10.
  • If the radix is not 10, the first two characters are removed from the string.

  • Any suffix is removed from the string.

  • Any underscores are removed from the string.

  • The string is converted to a u128 value as if by u128::from_str_radix with the chosen radix. If the value does not fit in u128, it is a compiler error.

  • The u128 value is converted to the expression’s type via a numeric cast.

Note: The final cast will truncate the value of the literal if it does not fit in the expression’s type. rustc includes a lint check named overflowing_literals, defaulting to deny, which rejects expressions where this occurs.

Note: -1i8, for example, is an application of the negation operator to the literal expression 1i8, not a single integer literal expression. See Overflow for notes on representing the most negative value for a signed type.

Floating-point literal expressions

A floating-point literal expression has one of two forms:

If the token has a suffix, the suffix must be the name of one of the primitive floating-point types: f32 or f64, and the expression has that type.

If the token has no suffix, the expression’s type is determined by type inference:

  • If a floating-point type can be uniquely determined from the surrounding program context, the expression has that type.

  • If the program context under-constrains the type, it defaults to f64.

  • If the program context over-constrains the type, it is considered a static type error.

Examples of floating-point literal expressions:

#![allow(unused)]
fn main() {
123.0f64;        // type f64
0.1f64;          // type f64
0.1f32;          // type f32
12E+99_f64;      // type f64
5f32;            // type f32
let x: f64 = 2.; // type f64
}

The value of the expression is determined from the string representation of the token as follows:

  • Any suffix is removed from the string.

  • Any underscores are removed from the string.

  • The string is converted to the expression’s type as if by f32::from_str or f64::from_str.

Note: -1.0, for example, is an application of the negation operator to the literal expression 1.0, not a single floating-point literal expression.

Note: inf and NaN are not literal tokens. The f32::INFINITY, f64::INFINITY, f32::NAN, and f64::NAN constants can be used instead of literal expressions. In rustc, a literal large enough to be evaluated as infinite will trigger the overflowing_literals lint check.

Boolean literal expressions

A boolean literal expression consists of one of the keywords true or false.

The expression’s type is the primitive boolean type, and its value is:

  • true if the keyword is true
  • false if the keyword is false

Path expressions

Syntax
PathExpression :
      PathInExpression
   | QualifiedPathInExpression

A path used as an expression context denotes either a local variable or an item. Path expressions that resolve to local or static variables are place expressions, other paths are value expressions. Using a static mut variable requires an unsafe block.

#![allow(unused)]
fn main() {
mod globals {
    pub static STATIC_VAR: i32 = 5;
    pub static mut STATIC_MUT_VAR: i32 = 7;
}
let local_var = 3;
local_var;
globals::STATIC_VAR;
unsafe { globals::STATIC_MUT_VAR };
let some_constructor = Some::<i32>;
let push_integer = Vec::<i32>::push;
let slice_reverse = <[i32]>::reverse;
}

Evaluation of associated constants is handled the same way as const blocks.

Block expressions

Syntax
BlockExpression :
   {
      InnerAttribute*
      Statements?
   }

Statements :
      Statement+
   | Statement+ ExpressionWithoutBlock
   | ExpressionWithoutBlock

A block expression, or block, is a control flow expression and anonymous namespace scope for items and variable declarations. As a control flow expression, a block sequentially executes its component non-item declaration statements and then its final optional expression. As an anonymous namespace scope, item declarations are only in scope inside the block itself and variables declared by let statements are in scope from the next statement until the end of the block. See the scopes chapter for more details.

The syntax for a block is {, then any inner attributes, then any number of statements, then an optional expression, called the final operand, and finally a }.

Statements are usually required to be followed by a semicolon, with two exceptions:

  1. Item declaration statements do not need to be followed by a semicolon.
  2. Expression statements usually require a following semicolon except if its outer expression is a flow control expression.

Furthermore, extra semicolons between statements are allowed, but these semicolons do not affect semantics.

When evaluating a block expression, each statement, except for item declaration statements, is executed sequentially. Then the final operand is executed, if given.

The type of a block is the type of the final operand, or () if the final operand is omitted.

#![allow(unused)]
fn main() {
fn fn_call() {}
let _: () = {
    fn_call();
};

let five: i32 = {
    fn_call();
    5
};

assert_eq!(5, five);
}

Note: As a control flow expression, if a block expression is the outer expression of an expression statement, the expected type is () unless it is followed immediately by a semicolon.

Blocks are always value expressions and evaluate the last operand in value expression context.

Note: This can be used to force moving a value if really needed. For example, the following example fails on the call to consume_self because the struct was moved out of s in the block expression.

#![allow(unused)]
fn main() {
struct Struct;

impl Struct {
    fn consume_self(self) {}
    fn borrow_self(&self) {}
}

fn move_by_block_expression() {
    let s = Struct;

    // Move the value out of `s` in the block expression.
    (&{ s }).borrow_self();

    // Fails to execute because `s` is moved out of.
    s.consume_self();
}
}

async blocks

Syntax
AsyncBlockExpression :
   async move? BlockExpression

An async block is a variant of a block expression which evaluates to a future. The final expression of the block, if present, determines the result value of the future.

Executing an async block is similar to executing a closure expression: its immediate effect is to produce and return an anonymous type. Whereas closures return a type that implements one or more of the std::ops::Fn traits, however, the type returned for an async block implements the std::future::Future trait. The actual data format for this type is unspecified.

Note: The future type that rustc generates is roughly equivalent to an enum with one variant per await point, where each variant stores the data needed to resume from its corresponding point.

Edition differences: Async blocks are only available beginning with Rust 2018.

Capture modes

Async blocks capture variables from their environment using the same capture modes as closures. Like closures, when written async { .. } the capture mode for each variable will be inferred from the content of the block. async move { .. } blocks however will move all referenced variables into the resulting future.

Async context

Because async blocks construct a future, they define an async context which can in turn contain await expressions. Async contexts are established by async blocks as well as the bodies of async functions, whose semantics are defined in terms of async blocks.

Control-flow operators

Async blocks act like a function boundary, much like closures. Therefore, the ? operator and return expressions both affect the output of the future, not the enclosing function or other context. That is, return <expr> from within an async block will return the result of <expr> as the output of the future. Similarly, if <expr>? propagates an error, that error is propagated as the result of the future.

Finally, the break and continue keywords cannot be used to branch out from an async block. Therefore the following is illegal:

#![allow(unused)]
fn main() {
loop {
    async move {
        break; // error[E0267]: `break` inside of an `async` block
    }
}
}

const blocks

Syntax
ConstBlockExpression :
   const BlockExpression

A const block is a variant of a block expression whose body evaluates at compile-time instead of at runtime.

Const blocks allows you to define a constant value without having to define new constant items, and thus they are also sometimes referred as inline consts. It also supports type inference so there is no need to specify the type, unlike constant items.

Const blocks have the ability to reference generic parameters in scope, unlike free constant items. They are desugared to constant items with generic parameters in scope (similar to associated constants, but without a trait or type they are associated with). For example, this code:

#![allow(unused)]
fn main() {
fn foo<T>() -> usize {
    const { std::mem::size_of::<T>() + 1 }
}
}

is equivalent to:

#![allow(unused)]
fn main() {
fn foo<T>() -> usize {
    {
        struct Const<T>(T);
        impl<T> Const<T> {
            const CONST: usize = std::mem::size_of::<T>() + 1;
        }
        Const::<T>::CONST
    }
}
}

If the const block expression is executed at runtime, then the constant is guaranteed to be evaluated, even if its return value is ignored:

#![allow(unused)]
fn main() {
fn foo<T>() -> usize {
    // If this code ever gets executed, then the assertion has definitely
    // been evaluated at compile-time.
    const { assert!(std::mem::size_of::<T>() > 0); }
    // Here we can have unsafe code relying on the type being non-zero-sized.
    /* ... */
    42
}
}

If the const block expression is not executed at runtime, it may or may not be evaluated:

#![allow(unused)]
fn main() {
if false {
    // The panic may or may not occur when the program is built.
    const { panic!(); }
}
}

unsafe blocks

Syntax
UnsafeBlockExpression :
   unsafe BlockExpression

See unsafe blocks for more information on when to use unsafe.

A block of code can be prefixed with the unsafe keyword to permit unsafe operations. Examples:

#![allow(unused)]
fn main() {
unsafe {
    let b = [13u8, 17u8];
    let a = &b[0] as *const u8;
    assert_eq!(*a, 13);
    assert_eq!(*a.offset(1), 17);
}

unsafe fn an_unsafe_fn() -> i32 { 10 }
let a = unsafe { an_unsafe_fn() };
}

Labelled block expressions

Labelled block expressions are documented in the Loops and other breakable expressions section.

Attributes on block expressions

Inner attributes are allowed directly after the opening brace of a block expression in the following situations:

The attributes that have meaning on a block expression are cfg and the lint check attributes.

For example, this function returns true on unix platforms and false on other platforms.

#![allow(unused)]
fn main() {
fn is_unix_platform() -> bool {
    #[cfg(unix)] { true }
    #[cfg(not(unix))] { false }
}
}

Operator expressions

Syntax
OperatorExpression :
      BorrowExpression
   | DereferenceExpression
   | ErrorPropagationExpression
   | NegationExpression
   | ArithmeticOrLogicalExpression
   | ComparisonExpression
   | LazyBooleanExpression
   | TypeCastExpression
   | AssignmentExpression
   | CompoundAssignmentExpression

Operators are defined for built in types by the Rust language. Many of the following operators can also be overloaded using traits in std::ops or std::cmp.

Overflow

Integer operators will panic when they overflow when compiled in debug mode. The -C debug-assertions and -C overflow-checks compiler flags can be used to control this more directly. The following things are considered to be overflow:

  • When +, * or binary - create a value greater than the maximum value, or less than the minimum value that can be stored.
  • Applying unary - to the most negative value of any signed integer type, unless the operand is a literal expression (or a literal expression standing alone inside one or more grouped expressions).
  • Using / or %, where the left-hand argument is the smallest integer of a signed integer type and the right-hand argument is -1. These checks occur even when -C overflow-checks is disabled, for legacy reasons.
  • Using << or >> where the right-hand argument is greater than or equal to the number of bits in the type of the left-hand argument, or is negative.

Note: The exception for literal expressions behind unary - means that forms such as -128_i8 or let j: i8 = -(128) never cause a panic and have the expected value of -128.

In these cases, the literal expression already has the most negative value for its type (for example, 128_i8 has the value -128) because integer literals are truncated to their type per the description in Integer literal expressions.

Negation of these most negative values leaves the value unchanged due to two’s complement overflow conventions.

In rustc, these most negative expressions are also ignored by the overflowing_literals lint check.

Borrow operators

Syntax
BorrowExpression :
      (&|&&) Expression
   | (&|&&) mut Expression
   | (&|&&) raw const Expression
   | (&|&&) raw mut Expression

The & (shared borrow) and &mut (mutable borrow) operators are unary prefix operators. When applied to a place expression, this expressions produces a reference (pointer) to the location that the value refers to. The memory location is also placed into a borrowed state for the duration of the reference. For a shared borrow (&), this implies that the place may not be mutated, but it may be read or shared again. For a mutable borrow (&mut), the place may not be accessed in any way until the borrow expires. &mut evaluates its operand in a mutable place expression context. If the & or &mut operators are applied to a value expression, then a temporary value is created.

These operators cannot be overloaded.

#![allow(unused)]
fn main() {
{
    // a temporary with value 7 is created that lasts for this scope.
    let shared_reference = &7;
}
let mut array = [-2, 3, 9];
{
    // Mutably borrows `array` for this scope.
    // `array` may only be used through `mutable_reference`.
    let mutable_reference = &mut array;
}
}

Even though && is a single token (the lazy ‘and’ operator), when used in the context of borrow expressions it works as two borrows:

#![allow(unused)]
fn main() {
// same meanings:
let a = &&  10;
let a = & & 10;

// same meanings:
let a = &&&&  mut 10;
let a = && && mut 10;
let a = & & & & mut 10;
}

Raw borrow operators

&raw const and &raw mut are the raw borrow operators. The operand expression of these operators is evaluated in place expression context. &raw const expr then creates a const raw pointer of type *const T to the given place, and &raw mut expr creates a mutable raw pointer of type *mut T.

The raw borrow operators must be used instead of a borrow operator whenever the place expression could evaluate to a place that is not properly aligned or does not store a valid value as determined by its type, or whenever creating a reference would introduce incorrect aliasing assumptions. In those situations, using a borrow operator would cause undefined behavior by creating an invalid reference, but a raw pointer may still be constructed.

The following is an example of creating a raw pointer to an unaligned place through a packed struct:

#![allow(unused)]
fn main() {
#[repr(packed)]
struct Packed {
    f1: u8,
    f2: u16,
}

let packed = Packed { f1: 1, f2: 2 };
// `&packed.f2` would create an unaligned reference, and thus be undefined behavior!
let raw_f2 = &raw const packed.f2;
assert_eq!(unsafe { raw_f2.read_unaligned() }, 2);
}

The following is an example of creating a raw pointer to a place that does not contain a valid value:

#![allow(unused)]
fn main() {
use std::mem::MaybeUninit;

struct Demo {
    field: bool,
}

let mut uninit = MaybeUninit::<Demo>::uninit();
// `&uninit.as_mut().field` would create a reference to an uninitialized `bool`,
// and thus be undefined behavior!
let f1_ptr = unsafe { &raw mut (*uninit.as_mut_ptr()).field };
unsafe { f1_ptr.write(true); }
let init = unsafe { uninit.assume_init() };
}

The dereference operator

Syntax
DereferenceExpression :
   * Expression

The * (dereference) operator is also a unary prefix operator. When applied to a pointer it denotes the pointed-to location. If the expression is of type &mut T or *mut T, and is either a local variable, a (nested) field of a local variable or is a mutable place expression, then the resulting memory location can be assigned to. Dereferencing a raw pointer requires unsafe.

On non-pointer types *x is equivalent to *std::ops::Deref::deref(&x) in an immutable place expression context and *std::ops::DerefMut::deref_mut(&mut x) in a mutable place expression context.

#![allow(unused)]
fn main() {
let x = &7;
assert_eq!(*x, 7);
let y = &mut 9;
*y = 11;
assert_eq!(*y, 11);
}

The question mark operator

Syntax
ErrorPropagationExpression :
   Expression ?

The question mark operator (?) unwraps valid values or returns erroneous values, propagating them to the calling function. It is a unary postfix operator that can only be applied to the types Result<T, E> and Option<T>.

When applied to values of the Result<T, E> type, it propagates errors. If the value is Err(e), then it will return Err(From::from(e)) from the enclosing function or closure. If applied to Ok(x), then it will unwrap the value to evaluate to x.

#![allow(unused)]
fn main() {
use std::num::ParseIntError;
fn try_to_parse() -> Result<i32, ParseIntError> {
    let x: i32 = "123".parse()?; // x = 123
    let y: i32 = "24a".parse()?; // returns an Err() immediately
    Ok(x + y)                    // Doesn't run.
}

let res = try_to_parse();
println!("{:?}", res);
assert!(res.is_err())
}

When applied to values of the Option<T> type, it propagates Nones. If the value is None, then it will return None. If applied to Some(x), then it will unwrap the value to evaluate to x.

#![allow(unused)]
fn main() {
fn try_option_some() -> Option<u8> {
    let val = Some(1)?;
    Some(val)
}
assert_eq!(try_option_some(), Some(1));

fn try_option_none() -> Option<u8> {
    let val = None?;
    Some(val)
}
assert_eq!(try_option_none(), None);
}

? cannot be overloaded.

Negation operators

Syntax
NegationExpression :
      - Expression
   | ! Expression

These are the last two unary operators. This table summarizes the behavior of them on primitive types and which traits are used to overload these operators for other types. Remember that signed integers are always represented using two’s complement. The operands of all of these operators are evaluated in value expression context so are moved or copied.

SymbolIntegerboolFloating PointOverloading Trait
-Negation*Negationstd::ops::Neg
!Bitwise NOTLogical NOTstd::ops::Not

* Only for signed integer types.

Here are some example of these operators

#![allow(unused)]
fn main() {
let x = 6;
assert_eq!(-x, -6);
assert_eq!(!x, -7);
assert_eq!(true, !false);
}

Arithmetic and Logical Binary Operators

Syntax
ArithmeticOrLogicalExpression :
      Expression + Expression
   | Expression - Expression
   | Expression * Expression
   | Expression / Expression
   | Expression % Expression
   | Expression & Expression
   | Expression | Expression
   | Expression ^ Expression
   | Expression << Expression
   | Expression >> Expression

Binary operators expressions are all written with infix notation. This table summarizes the behavior of arithmetic and logical binary operators on primitive types and which traits are used to overload these operators for other types. Remember that signed integers are always represented using two’s complement. The operands of all of these operators are evaluated in value expression context so are moved or copied.

SymbolIntegerboolFloating PointOverloading TraitOverloading Compound Assignment Trait
+AdditionAdditionstd::ops::Addstd::ops::AddAssign
-SubtractionSubtractionstd::ops::Substd::ops::SubAssign
*MultiplicationMultiplicationstd::ops::Mulstd::ops::MulAssign
/Division*†Divisionstd::ops::Divstd::ops::DivAssign
%Remainder**†Remainderstd::ops::Remstd::ops::RemAssign
&Bitwise ANDLogical ANDstd::ops::BitAndstd::ops::BitAndAssign
|Bitwise ORLogical ORstd::ops::BitOrstd::ops::BitOrAssign
^Bitwise XORLogical XORstd::ops::BitXorstd::ops::BitXorAssign
<<Left Shiftstd::ops::Shlstd::ops::ShlAssign
>>Right Shift***std::ops::Shrstd::ops::ShrAssign

* Integer division rounds towards zero.

** Rust uses a remainder defined with truncating division. Given remainder = dividend % divisor, the remainder will have the same sign as the dividend.

*** Arithmetic right shift on signed integer types, logical right shift on unsigned integer types.

† For integer types, division by zero panics.

Here are examples of these operators being used.

#![allow(unused)]
fn main() {
assert_eq!(3 + 6, 9);
assert_eq!(5.5 - 1.25, 4.25);
assert_eq!(-5 * 14, -70);
assert_eq!(14 / 3, 4);
assert_eq!(100 % 7, 2);
assert_eq!(0b1010 & 0b1100, 0b1000);
assert_eq!(0b1010 | 0b1100, 0b1110);
assert_eq!(0b1010 ^ 0b1100, 0b110);
assert_eq!(13 << 3, 104);
assert_eq!(-10 >> 2, -3);
}

Comparison Operators

Syntax
ComparisonExpression :
      Expression == Expression
   | Expression != Expression
   | Expression > Expression
   | Expression < Expression
   | Expression >= Expression
   | Expression <= Expression

Comparison operators are also defined both for primitive types and many types in the standard library. Parentheses are required when chaining comparison operators. For example, the expression a == b == c is invalid and may be written as (a == b) == c.

Unlike arithmetic and logical operators, the traits for overloading these operators are used more generally to show how a type may be compared and will likely be assumed to define actual comparisons by functions that use these traits as bounds. Many functions and macros in the standard library can then use that assumption (although not to ensure safety). Unlike the arithmetic and logical operators above, these operators implicitly take shared borrows of their operands, evaluating them in place expression context:

#![allow(unused)]
fn main() {
let a = 1;
let b = 1;
a == b;
// is equivalent to
::std::cmp::PartialEq::eq(&a, &b);
}

This means that the operands don’t have to be moved out of.

SymbolMeaningOverloading method
==Equalstd::cmp::PartialEq::eq
!=Not equalstd::cmp::PartialEq::ne
>Greater thanstd::cmp::PartialOrd::gt
<Less thanstd::cmp::PartialOrd::lt
>=Greater than or equal tostd::cmp::PartialOrd::ge
<=Less than or equal tostd::cmp::PartialOrd::le

Here are examples of the comparison operators being used.

#![allow(unused)]
fn main() {
assert!(123 == 123);
assert!(23 != -12);
assert!(12.5 > 12.2);
assert!([1, 2, 3] < [1, 3, 4]);
assert!('A' <= 'B');
assert!("World" >= "Hello");
}

Lazy boolean operators

Syntax
LazyBooleanExpression :
      Expression || Expression
   | Expression && Expression

The operators || and && may be applied to operands of boolean type. The || operator denotes logical ‘or’, and the && operator denotes logical ‘and’. They differ from | and & in that the right-hand operand is only evaluated when the left-hand operand does not already determine the result of the expression. That is, || only evaluates its right-hand operand when the left-hand operand evaluates to false, and && only when it evaluates to true.

#![allow(unused)]
fn main() {
let x = false || true; // true
let y = false && panic!(); // false, doesn't evaluate `panic!()`
}

Type cast expressions

Syntax
TypeCastExpression :
   Expression as TypeNoBounds

A type cast expression is denoted with the binary operator as.

Executing an as expression casts the value on the left-hand side to the type on the right-hand side.

An example of an as expression:

#![allow(unused)]
fn main() {
fn sum(values: &[f64]) -> f64 { 0.0 }
fn len(values: &[f64]) -> i32 { 0 }
fn average(values: &[f64]) -> f64 {
    let sum: f64 = sum(values);
    let size: f64 = len(values) as f64;
    sum / size
}
}

as can be used to explicitly perform coercions, as well as the following additional casts. Any cast that does not fit either a coercion rule or an entry in the table is a compiler error. Here *T means either *const T or *mut T. m stands for optional mut in reference types and mut or const in pointer types.

Type of eUCast performed by e as U
Integer or Float typeInteger or Float typeNumeric cast
EnumerationInteger typeEnum cast
bool or charInteger typePrimitive to integer cast
u8charu8 to char cast
*T*V where V: Sized *Pointer to pointer cast
*T where T: SizedInteger typePointer to address cast
Integer type*V where V: SizedAddress to pointer cast
&m₁ T*m₂ T **Reference to pointer cast
&m₁ [T; n]*m₂ T **Array to pointer cast
Function itemFunction pointerFunction item to function pointer cast
Function item*V where V: SizedFunction item to pointer cast
Function itemIntegerFunction item to address cast
Function pointer*V where V: SizedFunction pointer to pointer cast
Function pointerIntegerFunction pointer to address cast
Closure ***Function pointerClosure to function pointer cast

* or T and V are compatible unsized types, e.g., both slices, both the same trait object.

** only when m₁ is mut or m₂ is const. Casting mut reference to const pointer is allowed.

*** only for closures that do not capture (close over) any local variables

Semantics

Numeric cast

  • Casting between two integers of the same size (e.g. i32 -> u32) is a no-op (Rust uses 2’s complement for negative values of fixed integers)
  • Casting from a larger integer to a smaller integer (e.g. u32 -> u8) will truncate
  • Casting from a smaller integer to a larger integer (e.g. u8 -> u32) will
    • zero-extend if the source is unsigned
    • sign-extend if the source is signed
  • Casting from a float to an integer will round the float towards zero
    • NaN will return 0
    • Values larger than the maximum integer value, including INFINITY, will saturate to the maximum value of the integer type.
    • Values smaller than the minimum integer value, including NEG_INFINITY, will saturate to the minimum value of the integer type.
  • Casting from an integer to float will produce the closest possible float *
    • if necessary, rounding is according to roundTiesToEven mode ***
    • on overflow, infinity (of the same sign as the input) is produced
    • note: with the current set of numeric types, overflow can only happen on u128 as f32 for values greater or equal to f32::MAX + (0.5 ULP)
  • Casting from an f32 to an f64 is perfect and lossless
  • Casting from an f64 to an f32 will produce the closest possible f32 **
    • if necessary, rounding is according to roundTiesToEven mode ***
    • on overflow, infinity (of the same sign as the input) is produced

* if integer-to-float casts with this rounding mode and overflow behavior are not supported natively by the hardware, these casts will likely be slower than expected.

** if f64-to-f32 casts with this rounding mode and overflow behavior are not supported natively by the hardware, these casts will likely be slower than expected.

*** as defined in IEEE 754-2008 §4.3.1: pick the nearest floating point number, preferring the one with an even least significant digit if exactly halfway between two floating point numbers.

Enum cast

Casts an enum to its discriminant, then uses a numeric cast if needed. Casting is limited to the following kinds of enumerations:

Primitive to integer cast

  • false casts to 0, true casts to 1
  • char casts to the value of the code point, then uses a numeric cast if needed.

u8 to char cast

Casts to the char with the corresponding code point.

Pointer to address cast

Casting from a raw pointer to an integer produces the machine address of the referenced memory. If the integer type is smaller than the pointer type, the address may be truncated; using usize avoids this.

Address to pointer cast

Casting from an integer to a raw pointer interprets the integer as a memory address and produces a pointer referencing that memory.

Warning: This interacts with the Rust memory model, which is still under development. A pointer obtained from this cast may suffer additional restrictions even if it is bitwise equal to a valid pointer. Dereferencing such a pointer may be undefined behavior if aliasing rules are not followed.

A trivial example of sound address arithmetic:

#![allow(unused)]
fn main() {
let mut values: [i32; 2] = [1, 2];
let p1: *mut i32 = values.as_mut_ptr();
let first_address = p1 as usize;
let second_address = first_address + 4; // 4 == size_of::<i32>()
let p2 = second_address as *mut i32;
unsafe {
    *p2 += 1;
}
assert_eq!(values[1], 3);
}

Pointer-to-pointer cast

*const T / *mut T can be cast to *const U / *mut U with the following behavior:

  • If T and U are both sized, the pointer is returned unchanged.

  • If T and U are both unsized, the pointer is also returned unchanged. In particular, the metadata is preserved exactly.

    For instance, a cast from *const [T] to *const [U] preserves the number of elements. Note that, as a consequence, such casts do not necessarily preserve the size of the pointer’s referent (e.g., casting *const [u16] to *const [u8] will result in a raw pointer which refers to an object of half the size of the original). The same holds for str and any compound type whose unsized tail is a slice type, such as struct Foo(i32, [u8]) or (u64, Foo).

  • If T is unsized and U is sized, the cast discards all metadata that completes the wide pointer T and produces a thin pointer U consisting of the data part of the unsized pointer.

Assignment expressions

Syntax
AssignmentExpression :
   Expression = Expression

An assignment expression moves a value into a specified place.

An assignment expression consists of a mutable assignee expression, the assignee operand, followed by an equals sign (=) and a value expression, the assigned value operand. In its most basic form, an assignee expression is a place expression, and we discuss this case first. The more general case of destructuring assignment is discussed below, but this case always decomposes into sequential assignments to place expressions, which may be considered the more fundamental case.

Basic assignments

Evaluating assignment expressions begins by evaluating its operands. The assigned value operand is evaluated first, followed by the assignee expression. For destructuring assignment, subexpressions of the assignee expression are evaluated left-to-right.

Note: This is different than other expressions in that the right operand is evaluated before the left one.

It then has the effect of first dropping the value at the assigned place, unless the place is an uninitialized local variable or an uninitialized field of a local variable. Next it either copies or moves the assigned value to the assigned place.

An assignment expression always produces the unit value.

Example:

#![allow(unused)]
fn main() {
let mut x = 0;
let y = 0;
x = y;
}

Destructuring assignments

Destructuring assignment is a counterpart to destructuring pattern matches for variable declaration, permitting assignment to complex values, such as tuples or structs. For instance, we may swap two mutable variables:

#![allow(unused)]
fn main() {
let (mut a, mut b) = (0, 1);
// Swap `a` and `b` using destructuring assignment.
(b, a) = (a, b);
}

In contrast to destructuring declarations using let, patterns may not appear on the left-hand side of an assignment due to syntactic ambiguities. Instead, a group of expressions that correspond to patterns are designated to be assignee expressions, and permitted on the left-hand side of an assignment. Assignee expressions are then desugared to pattern matches followed by sequential assignment. The desugared patterns must be irrefutable: in particular, this means that only slice patterns whose length is known at compile-time, and the trivial slice [..], are permitted for destructuring assignment.

The desugaring method is straightforward, and is illustrated best by example.

#![allow(unused)]
fn main() {
struct Struct { x: u32, y: u32 }
let (mut a, mut b) = (0, 0);
(a, b) = (3, 4);

[a, b] = [3, 4];

Struct { x: a, y: b } = Struct { x: 3, y: 4};

// desugars to:

{
    let (_a, _b) = (3, 4);
    a = _a;
    b = _b;
}

{
    let [_a, _b] = [3, 4];
    a = _a;
    b = _b;
}

{
    let Struct { x: _a, y: _b } = Struct { x: 3, y: 4};
    a = _a;
    b = _b;
}
}

Identifiers are not forbidden from being used multiple times in a single assignee expression.

Underscore expressions and empty range expressions may be used to ignore certain values, without binding them.

Note that default binding modes do not apply for the desugared expression.

Compound assignment expressions

Syntax
CompoundAssignmentExpression :
      Expression += Expression
   | Expression -= Expression
   | Expression *= Expression
   | Expression /= Expression
   | Expression %= Expression
   | Expression &= Expression
   | Expression |= Expression
   | Expression ^= Expression
   | Expression <<= Expression
   | Expression >>= Expression

Compound assignment expressions combine arithmetic and logical binary operators with assignment expressions.

For example:

#![allow(unused)]
fn main() {
let mut x = 5;
x += 1;
assert!(x == 6);
}

The syntax of compound assignment is a mutable place expression, the assigned operand, then one of the operators followed by an = as a single token (no whitespace), and then a value expression, the modifying operand.

Unlike other place operands, the assigned place operand must be a place expression. Attempting to use a value expression is a compiler error rather than promoting it to a temporary.

Evaluation of compound assignment expressions depends on the types of the operators.

If both types are primitives, then the modifying operand will be evaluated first followed by the assigned operand. It will then set the value of the assigned operand’s place to the value of performing the operation of the operator with the values of the assigned operand and modifying operand.

Note: This is different than other expressions in that the right operand is evaluated before the left one.

Otherwise, this expression is syntactic sugar for calling the function of the overloading compound assignment trait of the operator (see the table earlier in this chapter). A mutable borrow of the assigned operand is automatically taken.

For example, the following expression statements in example are equivalent:

#![allow(unused)]
fn main() {
struct Addable;
use std::ops::AddAssign;

impl AddAssign<Addable> for Addable {
    /* */
fn add_assign(&mut self, other: Addable) {}
}

fn example() {
let (mut a1, a2) = (Addable, Addable);
  a1 += a2;

let (mut a1, a2) = (Addable, Addable);
  AddAssign::add_assign(&mut a1, a2);
}
}

Like assignment expressions, compound assignment expressions always produce the unit value.

Warning: The evaluation order of operands swaps depending on the types of the operands: with primitive types the right-hand side will get evaluated first, while with non-primitive types the left-hand side will get evaluated first. Try not to write code that depends on the evaluation order of operands in compound assignment expressions. See this test for an example of using this dependency.

Grouped expressions

Syntax
GroupedExpression :
   ( Expression )

A parenthesized expression wraps a single expression, evaluating to that expression. The syntax for a parenthesized expression is a (, then an expression, called the enclosed operand, and then a ).

Parenthesized expressions evaluate to the value of the enclosed operand. Unlike other expressions, parenthesized expressions are both place expressions and value expressions. When the enclosed operand is a place expression, it is a place expression and when the enclosed operand is a value expression, it is a value expression.

Parentheses can be used to explicitly modify the precedence order of subexpressions within an expression.

An example of a parenthesized expression:

#![allow(unused)]
fn main() {
let x: i32 = 2 + 3 * 4; // not parenthesized
let y: i32 = (2 + 3) * 4; // parenthesized
assert_eq!(x, 14);
assert_eq!(y, 20);
}

An example of a necessary use of parentheses is when calling a function pointer that is a member of a struct:

#![allow(unused)]
fn main() {
struct A {
   f: fn() -> &'static str
}
impl A {
   fn f(&self) -> &'static str {
       "The method f"
   }
}
let a = A{f: || "The field f"};

assert_eq!( a.f (), "The method f");
assert_eq!((a.f)(), "The field f");
}

Array and array index expressions

Array expressions

Syntax
ArrayExpression :
   [ ArrayElements? ]

ArrayElements :
      Expression ( , Expression )* ,?
   | Expression ; Expression

Array expressions construct arrays. Array expressions come in two forms.

The first form lists out every value in the array. The syntax for this form is a comma-separated list of expressions of uniform type enclosed in square brackets. This produces an array containing each of these values in the order they are written.

The syntax for the second form is two expressions separated by a semicolon (;) enclosed in square brackets. The expression before the ; is called the repeat operand. The expression after the ; is called the length operand. It must have type usize and be a constant expression, such as a literal or a constant item. An array expression of this form creates an array with the length of the value of the length operand with each element being a copy of the repeat operand. That is, [a; b] creates an array containing b copies of the value of a. If the length operand has a value greater than 1 then this requires that the type of the repeat operand is Copy or that it must be a path to a constant item.

When the repeat operand is a constant item, it is evaluated the length operand’s value times. If that value is 0, then the constant item is not evaluated at all. For expressions that are not a constant item, it is evaluated exactly once, and then the result is copied the length operand’s value times.

#![allow(unused)]
fn main() {
[1, 2, 3, 4];
["a", "b", "c", "d"];
[0; 128];              // array with 128 zeros
[0u8, 0u8, 0u8, 0u8,];
[[1, 0, 0], [0, 1, 0], [0, 0, 1]]; // 2D array
const EMPTY: Vec<i32> = Vec::new();
[EMPTY; 2];
}

Array and slice indexing expressions

Syntax
IndexExpression :
   Expression [ Expression ]

Array and slice-typed values can be indexed by writing a square-bracket-enclosed expression of type usize (the index) after them. When the array is mutable, the resulting memory location can be assigned to.

For other types an index expression a[b] is equivalent to *std::ops::Index::index(&a, b), or *std::ops::IndexMut::index_mut(&mut a, b) in a mutable place expression context. Just as with methods, Rust will also insert dereference operations on a repeatedly to find an implementation.

Indices are zero-based for arrays and slices. Array access is a constant expression, so bounds can be checked at compile-time with a constant index value. Otherwise a check will be performed at run-time that will put the thread in a panicked state if it fails.

#![allow(unused)]
fn main() {
// lint is deny by default.
#![warn(unconditional_panic)]

([1, 2, 3, 4])[2];        // Evaluates to 3

let b = [[1, 0, 0], [0, 1, 0], [0, 0, 1]];
b[1][2];                  // multidimensional array indexing

let x = (["a", "b"])[10]; // warning: index out of bounds

let n = 10;
let y = (["a", "b"])[n];  // panics

let arr = ["a", "b"];
arr[10];                  // warning: index out of bounds
}

The array index expression can be implemented for types other than arrays and slices by implementing the Index and IndexMut traits.

Tuple and tuple indexing expressions

Tuple expressions

Syntax
TupleExpression :
   ( TupleElements? )

TupleElements :
   ( Expression , )+ Expression?

A tuple expression constructs tuple values.

The syntax for tuple expressions is a parenthesized, comma separated list of expressions, called the tuple initializer operands. 1-ary tuple expressions require a comma after their tuple initializer operand to be disambiguated with a parenthetical expression.

Tuple expressions are a value expression that evaluate into a newly constructed value of a tuple type. The number of tuple initializer operands is the arity of the constructed tuple. Tuple expressions without any tuple initializer operands produce the unit tuple. For other tuple expressions, the first written tuple initializer operand initializes the field 0 and subsequent operands initializes the next highest field. For example, in the tuple expression ('a', 'b', 'c'), 'a' initializes the value of the field 0, 'b' field 1, and 'c' field 2.

Examples of tuple expressions and their types:

ExpressionType
()() (unit)
(0.0, 4.5)(f64, f64)
("x".to_string(), )(String, )
("a", 4usize, true)(&'static str, usize, bool)

Tuple indexing expressions

Syntax
TupleIndexingExpression :
   Expression . TUPLE_INDEX

A tuple indexing expression accesses fields of tuples and tuple structs.

The syntax for a tuple index expression is an expression, called the tuple operand, then a ., then finally a tuple index. The syntax for the tuple index is a decimal literal with no leading zeros, underscores, or suffix. For example 0 and 2 are valid tuple indices but not 01, 0_, nor 0i32.

The type of the tuple operand must be a tuple type or a tuple struct. The tuple index must be a name of a field of the type of the tuple operand.

Evaluation of tuple index expressions has no side effects beyond evaluation of its tuple operand. As a place expression, it evaluates to the location of the field of the tuple operand with the same name as the tuple index.

Examples of tuple indexing expressions:

#![allow(unused)]
fn main() {
// Indexing a tuple
let pair = ("a string", 2);
assert_eq!(pair.1, 2);

// Indexing a tuple struct
struct Point(f32, f32);
let point = Point(1.0, 0.0);
assert_eq!(point.0, 1.0);
assert_eq!(point.1, 0.0);
}

Note: Unlike field access expressions, tuple index expressions can be the function operand of a call expression as it cannot be confused with a method call since method names cannot be numbers.

Note: Although arrays and slices also have elements, you must use an array or slice indexing expression or a slice pattern to access their elements.

Struct expressions

Syntax
StructExpression :
      StructExprStruct
   | StructExprTuple
   | StructExprUnit

StructExprStruct :
   PathInExpression { (StructExprFields | StructBase)? }

StructExprFields :
   StructExprField (, StructExprField)* (, StructBase | ,?)

StructExprField :
   OuterAttribute *
   (
         IDENTIFIER
      | (IDENTIFIER | TUPLE_INDEX) : Expression
   )

StructBase :
   .. Expression

StructExprTuple :
   PathInExpression (
      ( Expression (, Expression)* ,? )?
   )

StructExprUnit : PathInExpression

A struct expression creates a struct, enum, or union value. It consists of a path to a struct, enum variant, or union item followed by the values for the fields of the item. There are three forms of struct expressions: struct, tuple, and unit.

The following are examples of struct expressions:

#![allow(unused)]
fn main() {
struct Point { x: f64, y: f64 }
struct NothingInMe { }
struct TuplePoint(f64, f64);
mod game { pub struct User<'a> { pub name: &'a str, pub age: u32, pub score: usize } }
struct Cookie; fn some_fn<T>(t: T) {}
Point {x: 10.0, y: 20.0};
NothingInMe {};
TuplePoint(10.0, 20.0);
TuplePoint { 0: 10.0, 1: 20.0 }; // Results in the same value as the above line
let u = game::User {name: "Joe", age: 35, score: 100_000};
some_fn::<Cookie>(Cookie);
}

Field struct expression

A struct expression with fields enclosed in curly braces allows you to specify the value for each individual field in any order. The field name is separated from its value with a colon.

A value of a union type can only be created using this syntax, and it must specify exactly one field.

Functional update syntax

A struct expression that constructs a value of a struct type can terminate with the syntax .. followed by an expression to denote a functional update. The expression following .. (the base) must have the same struct type as the new struct type being formed.

The entire expression uses the given values for the fields that were specified and moves or copies the remaining fields from the base expression. As with all struct expressions, all of the fields of the struct must be visible, even those not explicitly named.

#![allow(unused)]
fn main() {
struct Point3d { x: i32, y: i32, z: i32 }
let mut base = Point3d {x: 1, y: 2, z: 3};
let y_ref = &mut base.y;
Point3d {y: 0, z: 10, .. base}; // OK, only base.x is accessed
drop(y_ref);
}

Struct expressions with curly braces can’t be used directly in a loop or if expression’s head, or in the scrutinee of an if let or match expression. However, struct expressions can be used in these situations if they are within another expression, for example inside parentheses.

The field names can be decimal integer values to specify indices for constructing tuple structs. This can be used with base structs to fill out the remaining indices not specified:

#![allow(unused)]
fn main() {
struct Color(u8, u8, u8);
let c1 = Color(0, 0, 0);  // Typical way of creating a tuple struct.
let c2 = Color{0: 255, 1: 127, 2: 0};  // Specifying fields by index.
let c3 = Color{1: 0, ..c2};  // Fill out all other fields using a base struct.
}

Struct field init shorthand

When initializing a data structure (struct, enum, union) with named (but not numbered) fields, it is allowed to write fieldname as a shorthand for fieldname: fieldname. This allows a compact syntax with less duplication. For example:

#![allow(unused)]
fn main() {
struct Point3d { x: i32, y: i32, z: i32 }
let x = 0;
let y_value = 0;
let z = 0;
Point3d { x: x, y: y_value, z: z };
Point3d { x, y: y_value, z };
}

Tuple struct expression

A struct expression with fields enclosed in parentheses constructs a tuple struct. Though it is listed here as a specific expression for completeness, it is equivalent to a call expression to the tuple struct’s constructor. For example:

#![allow(unused)]
fn main() {
struct Position(i32, i32, i32);
Position(0, 0, 0);  // Typical way of creating a tuple struct.
let c = Position;  // `c` is a function that takes 3 arguments.
let pos = c(8, 6, 7);  // Creates a `Position` value.
}

Unit struct expression

A unit struct expression is just the path to a unit struct item. This refers to the unit struct’s implicit constant of its value. The unit struct value can also be constructed with a fieldless struct expression. For example:

#![allow(unused)]
fn main() {
struct Gamma;
let a = Gamma;  // Gamma unit value.
let b = Gamma{};  // Exact same value as `a`.
}

Call expressions

Syntax
CallExpression :
   Expression ( CallParams? )

CallParams :
   Expression ( , Expression )* ,?

A call expression calls a function. The syntax of a call expression is an expression, called the function operand, followed by a parenthesized comma-separated list of expression, called the argument operands. If the function eventually returns, then the expression completes. For non-function types, the expression f(...) uses the method on one of the std::ops::Fn, std::ops::FnMut or std::ops::FnOnce traits, which differ in whether they take the type by reference, mutable reference, or take ownership respectively. An automatic borrow will be taken if needed. The function operand will also be automatically dereferenced as required.

Some examples of call expressions:

#![allow(unused)]
fn main() {
fn add(x: i32, y: i32) -> i32 { 0 }
let three: i32 = add(1i32, 2i32);
let name: &'static str = (|| "Rust")();
}

Disambiguating Function Calls

All function calls are sugar for a more explicit fully-qualified syntax. Function calls may need to be fully qualified, depending on the ambiguity of a call in light of in-scope items.

Note: In the past, the terms “Unambiguous Function Call Syntax”, “Universal Function Call Syntax”, or “UFCS”, have been used in documentation, issues, RFCs, and other community writings. However, these terms lack descriptive power and potentially confuse the issue at hand. We mention them here for searchability’s sake.

Several situations often occur which result in ambiguities about the receiver or referent of method or associated function calls. These situations may include:

  • Multiple in-scope traits define methods with the same name for the same types
  • Auto-deref is undesirable; for example, distinguishing between methods on a smart pointer itself and the pointer’s referent
  • Methods which take no arguments, like default(), and return properties of a type, like size_of()

To resolve the ambiguity, the programmer may refer to their desired method or function using more specific paths, types, or traits.

For example,

trait Pretty {
    fn print(&self);
}

trait Ugly {
    fn print(&self);
}

struct Foo;
impl Pretty for Foo {
    fn print(&self) {}
}

struct Bar;
impl Pretty for Bar {
    fn print(&self) {}
}
impl Ugly for Bar {
    fn print(&self) {}
}

fn main() {
    let f = Foo;
    let b = Bar;

    // we can do this because we only have one item called `print` for `Foo`s
    f.print();
    // more explicit, and, in the case of `Foo`, not necessary
    Foo::print(&f);
    // if you're not into the whole brevity thing
    <Foo as Pretty>::print(&f);

    // b.print(); // Error: multiple 'print' found
    // Bar::print(&b); // Still an error: multiple `print` found

    // necessary because of in-scope items defining `print`
    <Bar as Pretty>::print(&b);
}

Refer to RFC 132 for further details and motivations.

Method-call expressions

Syntax
MethodCallExpression :
   Expression . PathExprSegment (CallParams? )

A method call consists of an expression (the receiver) followed by a single dot, an expression path segment, and a parenthesized expression-list. Method calls are resolved to associated methods on specific traits, either statically dispatching to a method if the exact self-type of the left-hand-side is known, or dynamically dispatching if the left-hand-side expression is an indirect trait object.

#![allow(unused)]
fn main() {
let pi: Result<f32, _> = "3.14".parse();
let log_pi = pi.unwrap_or(1.0).log(2.72);
assert!(1.14 < log_pi && log_pi < 1.15)
}

When looking up a method call, the receiver may be automatically dereferenced or borrowed in order to call a method. This requires a more complex lookup process than for other functions, since there may be a number of possible methods to call. The following procedure is used:

The first step is to build a list of candidate receiver types. Obtain these by repeatedly dereferencing the receiver expression’s type, adding each type encountered to the list, then finally attempting an unsized coercion at the end, and adding the result type if that is successful. Then, for each candidate T, add &T and &mut T to the list immediately after T.

For instance, if the receiver has type Box<[i32;2]>, then the candidate types will be Box<[i32;2]>, &Box<[i32;2]>, &mut Box<[i32;2]>, [i32; 2] (by dereferencing), &[i32; 2], &mut [i32; 2], [i32] (by unsized coercion), &[i32], and finally &mut [i32].

Then, for each candidate type T, search for a visible method with a receiver of that type in the following places:

  1. T’s inherent methods (methods implemented directly on T).
  2. Any of the methods provided by a visible trait implemented by T. If T is a type parameter, methods provided by trait bounds on T are looked up first. Then all remaining methods in scope are looked up.

Note: the lookup is done for each type in order, which can occasionally lead to surprising results. The below code will print “In trait impl!”, because &self methods are looked up first, the trait method is found before the struct’s &mut self method is found.

struct Foo {}

trait Bar {
  fn bar(&self);
}

impl Foo {
  fn bar(&mut self) {
    println!("In struct impl!")
  }
}

impl Bar for Foo {
  fn bar(&self) {
    println!("In trait impl!")
  }
}

fn main() {
  let mut f = Foo{};
  f.bar();
}

If this results in multiple possible candidates, then it is an error, and the receiver must be converted to an appropriate receiver type to make the method call.

This process does not take into account the mutability or lifetime of the receiver, or whether a method is unsafe. Once a method is looked up, if it can’t be called for one (or more) of those reasons, the result is a compiler error.

If a step is reached where there is more than one possible method, such as where generic methods or traits are considered the same, then it is a compiler error. These cases require a disambiguating function call syntax for method and function invocation.

Edition differences: Before the 2021 edition, during the search for visible methods, if the candidate receiver type is an array type, methods provided by the standard library IntoIterator trait are ignored.

The edition used for this purpose is determined by the token representing the method name.

This special case may be removed in the future.

Warning: For trait objects, if there is an inherent method of the same name as a trait method, it will give a compiler error when trying to call the method in a method call expression. Instead, you can call the method using disambiguating function call syntax, in which case it calls the trait method, not the inherent method. There is no way to call the inherent method. Just don’t define inherent methods on trait objects with the same name as a trait method and you’ll be fine.

Field access expressions

Syntax
FieldExpression :
   Expression . IDENTIFIER

A field expression is a place expression that evaluates to the location of a field of a struct or union. When the operand is mutable, the field expression is also mutable.

The syntax for a field expression is an expression, called the container operand, then a ., and finally an identifier. Field expressions cannot be followed by a parenthetical comma-separated list of expressions, as that is instead parsed as a method call expression. That is, they cannot be the function operand of a call expression.

Note: Wrap the field expression in a parenthesized expression to use it in a call expression.

#![allow(unused)]
fn main() {
struct HoldsCallable<F: Fn()> { callable: F }
let holds_callable = HoldsCallable { callable: || () };

// Invalid: Parsed as calling the method "callable"
// holds_callable.callable();

// Valid
(holds_callable.callable)();
}

Examples:

mystruct.myfield;
foo().x;
(Struct {a: 10, b: 20}).a;
(mystruct.function_field)() // Call expression containing a field expression

Automatic dereferencing

If the type of the container operand implements Deref or DerefMut depending on whether the operand is mutable, it is automatically dereferenced as many times as necessary to make the field access possible. This process is also called autoderef for short.

Borrowing

The fields of a struct or a reference to a struct are treated as separate entities when borrowing. If the struct does not implement Drop and is stored in a local variable, this also applies to moving out of each of its fields. This also does not apply if automatic dereferencing is done though user-defined types other than Box.

#![allow(unused)]
fn main() {
struct A { f1: String, f2: String, f3: String }
let mut x: A;
x = A {
    f1: "f1".to_string(),
    f2: "f2".to_string(),
    f3: "f3".to_string()
};
let a: &mut String = &mut x.f1; // x.f1 borrowed mutably
let b: &String = &x.f2;         // x.f2 borrowed immutably
let c: &String = &x.f2;         // Can borrow again
let d: String = x.f3;           // Move out of x.f3
}

Closure expressions

Syntax
ClosureExpression :
   move?
   ( || | | ClosureParameters? | )
   (Expression | -> TypeNoBounds BlockExpression)

ClosureParameters :
   ClosureParam (, ClosureParam)* ,?

ClosureParam :
   OuterAttribute* PatternNoTopAlt ( : Type )?

A closure expression, also known as a lambda expression or a lambda, defines a closure type and evaluates to a value of that type. The syntax for a closure expression is an optional move keyword, then a pipe-symbol-delimited (|) comma-separated list of patterns, called the closure parameters each optionally followed by a : and a type, then an optional -> and type, called the return type, and then an expression, called the closure body operand. The optional type after each pattern is a type annotation for the pattern. If there is a return type, the closure body must be a block.

A closure expression denotes a function that maps a list of parameters onto the expression that follows the parameters. Just like a let binding, the closure parameters are irrefutable patterns, whose type annotation is optional and will be inferred from context if not given. Each closure expression has a unique, anonymous type.

Significantly, closure expressions capture their environment, which regular function definitions do not. Without the move keyword, the closure expression infers how it captures each variable from its environment, preferring to capture by shared reference, effectively borrowing all outer variables mentioned inside the closure’s body. If needed the compiler will infer that instead mutable references should be taken, or that the values should be moved or copied (depending on their type) from the environment. A closure can be forced to capture its environment by copying or moving values by prefixing it with the move keyword. This is often used to ensure that the closure’s lifetime is 'static.

Closure trait implementations

Which traits the closure type implement depends on how variables are captured and the types of the captured variables. See the call traits and coercions chapter for how and when a closure implements Fn, FnMut, and FnOnce. The closure type implements Send and Sync if the type of every captured variable also implements the trait.

Example

In this example, we define a function ten_times that takes a higher-order function argument, and we then call it with a closure expression as an argument, followed by a closure expression that moves values from its environment.

#![allow(unused)]
fn main() {
fn ten_times<F>(f: F) where F: Fn(i32) {
    for index in 0..10 {
        f(index);
    }
}

ten_times(|j| println!("hello, {}", j));
// With type annotations
ten_times(|j: i32| -> () { println!("hello, {}", j) });

let word = "konnichiwa".to_owned();
ten_times(move |j| println!("{}, {}", word, j));
}

Attributes on closure parameters

Attributes on closure parameters follow the same rules and restrictions as regular function parameters.

Loops and other breakable expressions

Syntax
LoopExpression :
   LoopLabel? (
         InfiniteLoopExpression
      | PredicateLoopExpression
      | PredicatePatternLoopExpression
      | IteratorLoopExpression
      | LabelBlockExpression
   )

Rust supports five loop expressions:

All five types of loop support break expressions, and labels. All except labelled block expressions support continue expressions. Only loop and labelled block expressions support evaluation to non-trivial values.

Infinite loops

Syntax
InfiniteLoopExpression :
   loop BlockExpression

A loop expression repeats execution of its body continuously: loop { println!("I live."); }.

A loop expression without an associated break expression is diverging and has type !. A loop expression containing associated break expression(s) may terminate, and must have type compatible with the value of the break expression(s).

Predicate loops

Syntax
PredicateLoopExpression :
   while Expressionexcept struct expression BlockExpression

A while loop begins by evaluating the boolean loop conditional operand. If the loop conditional operand evaluates to true, the loop body block executes, then control returns to the loop conditional operand. If the loop conditional expression evaluates to false, the while expression completes.

An example:

#![allow(unused)]
fn main() {
let mut i = 0;

while i < 10 {
    println!("hello");
    i = i + 1;
}
}

Predicate pattern loops

Syntax
PredicatePatternLoopExpression :
   while let Pattern = Scrutineeexcept lazy boolean operator expression BlockExpression

A while let loop is semantically similar to a while loop but in place of a condition expression it expects the keyword let followed by a pattern, an =, a scrutinee expression and a block expression. If the value of the scrutinee matches the pattern, the loop body block executes then control returns to the pattern matching statement. Otherwise, the while expression completes.

#![allow(unused)]
fn main() {
let mut x = vec![1, 2, 3];

while let Some(y) = x.pop() {
    println!("y = {}", y);
}

while let _ = 5 {
    println!("Irrefutable patterns are always true");
    break;
}
}

A while let loop is equivalent to a loop expression containing a match expression as follows.

'label: while let PATS = EXPR {
    /* loop body */
}

is equivalent to

'label: loop {
    match EXPR {
        PATS => { /* loop body */ },
        _ => break,
    }
}

Multiple patterns may be specified with the | operator. This has the same semantics as with | in match expressions:

#![allow(unused)]
fn main() {
let mut vals = vec![2, 3, 1, 2, 2];
while let Some(v @ 1) | Some(v @ 2) = vals.pop() {
    // Prints 2, 2, then 1
    println!("{}", v);
}
}

As is the case in if let expressions, the scrutinee cannot be a lazy boolean operator expression.

Iterator loops

Syntax
IteratorLoopExpression :
   for Pattern in Expressionexcept struct expression BlockExpression

A for expression is a syntactic construct for looping over elements provided by an implementation of std::iter::IntoIterator. If the iterator yields a value, that value is matched against the irrefutable pattern, the body of the loop is executed, and then control returns to the head of the for loop. If the iterator is empty, the for expression completes.

An example of a for loop over the contents of an array:

#![allow(unused)]
fn main() {
let v = &["apples", "cake", "coffee"];

for text in v {
    println!("I like {}.", text);
}
}

An example of a for loop over a series of integers:

#![allow(unused)]
fn main() {
let mut sum = 0;
for n in 1..11 {
    sum += n;
}
assert_eq!(sum, 55);
}

A for loop is equivalent to a loop expression containing a match expression as follows:

'label: for PATTERN in iter_expr {
    /* loop body */
}

is equivalent to

{
    let result = match IntoIterator::into_iter(iter_expr) {
        mut iter => 'label: loop {
            let mut next;
            match Iterator::next(&mut iter) {
                Option::Some(val) => next = val,
                Option::None => break,
            };
            let PATTERN = next;
            let () = { /* loop body */ };
        },
    };
    result
}

IntoIterator, Iterator, and Option are always the standard library items here, not whatever those names resolve to in the current scope. The variable names next, iter, and val are for exposition only, they do not actually have names the user can type.

Note: that the outer match is used to ensure that any temporary values in iter_expr don’t get dropped before the loop is finished. next is declared before being assigned because it results in types being inferred correctly more often.

Loop labels

Syntax
LoopLabel :
   LIFETIME_OR_LABEL :

A loop expression may optionally have a label. The label is written as a lifetime preceding the loop expression, as in 'foo: loop { break 'foo; }, 'bar: while false {}, 'humbug: for _ in 0..0 {}. If a label is present, then labeled break and continue expressions nested within this loop may exit out of this loop or return control to its head. See break expressions and continue expressions.

Labels follow the hygiene and shadowing rules of local variables. For example, this code will print “outer loop”:

#![allow(unused)]
fn main() {
'a: loop {
    'a: loop {
        break 'a;
    }
    print!("outer loop");
    break 'a;
}
}

'_ is not a valid loop label.

break expressions

Syntax
BreakExpression :
   break LIFETIME_OR_LABEL? Expression?

When break is encountered, execution of the associated loop body is immediately terminated, for example:

#![allow(unused)]
fn main() {
let mut last = 0;
for x in 1..100 {
    if x > 12 {
        break;
    }
    last = x;
}
assert_eq!(last, 12);
}

A break expression is normally associated with the innermost loop, for or while loop enclosing the break expression, but a label can be used to specify which enclosing loop is affected. Example:

#![allow(unused)]
fn main() {
'outer: loop {
    while true {
        break 'outer;
    }
}
}

A break expression is only permitted in the body of a loop, and has one of the forms break, break 'label or (see below) break EXPR or break 'label EXPR.

Labelled block expressions

Syntax
LabelBlockExpression :
   BlockExpression

Labelled block expressions are exactly like block expressions, except that they allow using break expressions within the block. Unlike loops, break expressions within a labelled block expression must have a label (i.e. the label is not optional). Similarly, labelled block expressions must begin with a label.

#![allow(unused)]
fn main() {
fn do_thing() {}
fn condition_not_met() -> bool { true }
fn do_next_thing() {}
fn do_last_thing() {}
let result = 'block: {
    do_thing();
    if condition_not_met() {
        break 'block 1;
    }
    do_next_thing();
    if condition_not_met() {
        break 'block 2;
    }
    do_last_thing();
    3
};
}

continue expressions

Syntax
ContinueExpression :
   continue LIFETIME_OR_LABEL?

When continue is encountered, the current iteration of the associated loop body is immediately terminated, returning control to the loop head. In the case of a while loop, the head is the conditional expression controlling the loop. In the case of a for loop, the head is the call-expression controlling the loop.

Like break, continue is normally associated with the innermost enclosing loop, but continue 'label may be used to specify the loop affected. A continue expression is only permitted in the body of a loop.

break and loop values

When associated with a loop, a break expression may be used to return a value from that loop, via one of the forms break EXPR or break 'label EXPR, where EXPR is an expression whose result is returned from the loop. For example:

#![allow(unused)]
fn main() {
let (mut a, mut b) = (1, 1);
let result = loop {
    if b > 10 {
        break b;
    }
    let c = a + b;
    a = b;
    b = c;
};
// first number in Fibonacci sequence over 10:
assert_eq!(result, 13);
}

In the case a loop has an associated break, it is not considered diverging, and the loop must have a type compatible with each break expression. break without an expression is considered identical to break with expression ().

Range expressions

Syntax
RangeExpression :
      RangeExpr
   | RangeFromExpr
   | RangeToExpr
   | RangeFullExpr
   | RangeInclusiveExpr
   | RangeToInclusiveExpr

RangeExpr :
   Expression .. Expression

RangeFromExpr :
   Expression ..

RangeToExpr :
   .. Expression

RangeFullExpr :
   ..

RangeInclusiveExpr :
   Expression ..= Expression

RangeToInclusiveExpr :
   ..= Expression

The .. and ..= operators will construct an object of one of the std::ops::Range (or core::ops::Range) variants, according to the following table:

ProductionSyntaxTypeRange
RangeExprstart..endstd::ops::Rangestart ≤ x < end
RangeFromExprstart..std::ops::RangeFromstart ≤ x
RangeToExpr..endstd::ops::RangeTox < end
RangeFullExpr..std::ops::RangeFull-
RangeInclusiveExprstart..=endstd::ops::RangeInclusivestart ≤ x ≤ end
RangeToInclusiveExpr..=endstd::ops::RangeToInclusivex ≤ end

Examples:

#![allow(unused)]
fn main() {
1..2;   // std::ops::Range
3..;    // std::ops::RangeFrom
..4;    // std::ops::RangeTo
..;     // std::ops::RangeFull
5..=6;  // std::ops::RangeInclusive
..=7;   // std::ops::RangeToInclusive
}

The following expressions are equivalent.

#![allow(unused)]
fn main() {
let x = std::ops::Range {start: 0, end: 10};
let y = 0..10;

assert_eq!(x, y);
}

Ranges can be used in for loops:

#![allow(unused)]
fn main() {
for i in 1..11 {
    println!("{}", i);
}
}

if and if let expressions

if expressions

Syntax
IfExpression :
   if Expressionexcept struct expression BlockExpression
   (else ( BlockExpression | IfExpression | IfLetExpression ) )?

An if expression is a conditional branch in program control. The syntax of an if expression is a condition operand, followed by a consequent block, any number of else if conditions and blocks, and an optional trailing else block. The condition operands must have the boolean type. If a condition operand evaluates to true, the consequent block is executed and any subsequent else if or else block is skipped. If a condition operand evaluates to false, the consequent block is skipped and any subsequent else if condition is evaluated. If all if and else if conditions evaluate to false then any else block is executed. An if expression evaluates to the same value as the executed block, or () if no block is evaluated. An if expression must have the same type in all situations.

#![allow(unused)]
fn main() {
let x = 3;
if x == 4 {
    println!("x is four");
} else if x == 3 {
    println!("x is three");
} else {
    println!("x is something else");
}

let y = if 12 * 15 > 150 {
    "Bigger"
} else {
    "Smaller"
};
assert_eq!(y, "Bigger");
}

if let expressions

Syntax
IfLetExpression :
   if let Pattern = Scrutineeexcept lazy boolean operator expression BlockExpression
   (else ( BlockExpression | IfExpression | IfLetExpression ) )?

An if let expression is semantically similar to an if expression but in place of a condition operand it expects the keyword let followed by a pattern, an = and a scrutinee operand. If the value of the scrutinee matches the pattern, the corresponding block will execute. Otherwise, flow proceeds to the following else block if it exists. Like if expressions, if let expressions have a value determined by the block that is evaluated.

#![allow(unused)]
fn main() {
let dish = ("Ham", "Eggs");

// this body will be skipped because the pattern is refuted
if let ("Bacon", b) = dish {
    println!("Bacon is served with {}", b);
} else {
    // This block is evaluated instead.
    println!("No bacon will be served");
}

// this body will execute
if let ("Ham", b) = dish {
    println!("Ham is served with {}", b);
}

if let _ = 5 {
    println!("Irrefutable patterns are always true");
}
}

if and if let expressions can be intermixed:

#![allow(unused)]
fn main() {
let x = Some(3);
let a = if let Some(1) = x {
    1
} else if x == Some(2) {
    2
} else if let Some(y) = x {
    y
} else {
    -1
};
assert_eq!(a, 3);
}

An if let expression is equivalent to a match expression as follows:

if let PATS = EXPR {
    /* body */
} else {
    /*else */
}

is equivalent to

match EXPR {
    PATS => { /* body */ },
    _ => { /* else */ },    // () if there is no else
}

Multiple patterns may be specified with the | operator. This has the same semantics as with | in match expressions:

#![allow(unused)]
fn main() {
enum E {
    X(u8),
    Y(u8),
    Z(u8),
}
let v = E::Y(12);
if let E::X(n) | E::Y(n) = v {
    assert_eq!(n, 12);
}
}

The expression cannot be a lazy boolean operator expression. Use of a lazy boolean operator is ambiguous with a planned feature change of the language (the implementation of if-let chains - see eRFC 2947). When lazy boolean operator expression is desired, this can be achieved by using parenthesis as below:

// Before...
if let PAT = EXPR && EXPR { .. }

// After...
if let PAT = ( EXPR && EXPR ) { .. }

// Before...
if let PAT = EXPR || EXPR { .. }

// After...
if let PAT = ( EXPR || EXPR ) { .. }

match expressions

Syntax
MatchExpression :
   match Scrutinee {
      InnerAttribute*
      MatchArms?
   }

Scrutinee :
   Expressionexcept struct expression

MatchArms :
   ( MatchArm => ( ExpressionWithoutBlock , | ExpressionWithBlock ,? ) )*
   MatchArm => Expression ,?

MatchArm :
   OuterAttribute* Pattern MatchArmGuard?

MatchArmGuard :
   if Expression

A match expression branches on a pattern. The exact form of matching that occurs depends on the pattern. A match expression has a scrutinee expression, which is the value to compare to the patterns. The scrutinee expression and the patterns must have the same type.

A match behaves differently depending on whether or not the scrutinee expression is a place expression or value expression. If the scrutinee expression is a value expression, it is first evaluated into a temporary location, and the resulting value is sequentially compared to the patterns in the arms until a match is found. The first arm with a matching pattern is chosen as the branch target of the match, any variables bound by the pattern are assigned to local variables in the arm’s block, and control enters the block.

When the scrutinee expression is a place expression, the match does not allocate a temporary location; however, a by-value binding may copy or move from the memory location. When possible, it is preferable to match on place expressions, as the lifetime of these matches inherits the lifetime of the place expression rather than being restricted to the inside of the match.

An example of a match expression:

#![allow(unused)]
fn main() {
let x = 1;

match x {
    1 => println!("one"),
    2 => println!("two"),
    3 => println!("three"),
    4 => println!("four"),
    5 => println!("five"),
    _ => println!("something else"),
}
}

Variables bound within the pattern are scoped to the match guard and the arm’s expression. The binding mode (move, copy, or reference) depends on the pattern.

Multiple match patterns may be joined with the | operator. Each pattern will be tested in left-to-right sequence until a successful match is found.

#![allow(unused)]
fn main() {
let x = 9;
let message = match x {
    0 | 1  => "not many",
    2 ..= 9 => "a few",
    _      => "lots"
};

assert_eq!(message, "a few");

// Demonstration of pattern match order.
struct S(i32, i32);

match S(1, 2) {
    S(z @ 1, _) | S(_, z @ 2) => assert_eq!(z, 1),
    _ => panic!(),
}
}

Note: The 2..=9 is a Range Pattern, not a Range Expression. Thus, only those types of ranges supported by range patterns can be used in match arms.

Every binding in each | separated pattern must appear in all of the patterns in the arm. Every binding of the same name must have the same type, and have the same binding mode.

Match guards

Match arms can accept match guards to further refine the criteria for matching a case. Pattern guards appear after the pattern and consist of a bool-typed expression following the if keyword.

When the pattern matches successfully, the pattern guard expression is executed. If the expression evaluates to true, the pattern is successfully matched against. Otherwise, the next pattern, including other matches with the | operator in the same arm, is tested.

#![allow(unused)]
fn main() {
let maybe_digit = Some(0);
fn process_digit(i: i32) { }
fn process_other(i: i32) { }
let message = match maybe_digit {
    Some(x) if x < 10 => process_digit(x),
    Some(x) => process_other(x),
    None => panic!(),
};
}

Note: Multiple matches using the | operator can cause the pattern guard and the side effects it has to execute multiple times. For example:

#![allow(unused)]
fn main() {
use std::cell::Cell;
let i : Cell<i32> = Cell::new(0);
match 1 {
    1 | _ if { i.set(i.get() + 1); false } => {}
    _ => {}
}
assert_eq!(i.get(), 2);
}

A pattern guard may refer to the variables bound within the pattern they follow. Before evaluating the guard, a shared reference is taken to the part of the scrutinee the variable matches on. While evaluating the guard, this shared reference is then used when accessing the variable. Only when the guard evaluates to true is the value moved, or copied, from the scrutinee into the variable. This allows shared borrows to be used inside guards without moving out of the scrutinee in case guard fails to match. Moreover, by holding a shared reference while evaluating the guard, mutation inside guards is also prevented.

Attributes on match arms

Outer attributes are allowed on match arms. The only attributes that have meaning on match arms are cfg and the lint check attributes.

Inner attributes are allowed directly after the opening brace of the match expression in the same expression contexts as attributes on block expressions.

return expressions

Syntax
ReturnExpression :
   return Expression?

Return expressions are denoted with the keyword return. Evaluating a return expression moves its argument into the designated output location for the current function call, destroys the current function activation frame, and transfers control to the caller frame.

An example of a return expression:

#![allow(unused)]
fn main() {
fn max(a: i32, b: i32) -> i32 {
    if a > b {
        return a;
    }
    return b;
}
}

Await expressions

Syntax
AwaitExpression :
   Expression . await

An await expression is a syntactic construct for suspending a computation provided by an implementation of std::future::IntoFuture until the given future is ready to produce a value. The syntax for an await expression is an expression with a type that implements the IntoFuture trait, called the future operand, then the token ., and then the await keyword. Await expressions are legal only within an async context, like an async fn or an async block.

More specifically, an await expression has the following effect.

  1. Create a future by calling IntoFuture::into_future on the future operand.
  2. Evaluate the future to a future tmp;
  3. Pin tmp using Pin::new_unchecked;
  4. This pinned future is then polled by calling the Future::poll method and passing it the current task context;
  5. If the call to poll returns Poll::Pending, then the future returns Poll::Pending, suspending its state so that, when the surrounding async context is re-polled,execution returns to step 3;
  6. Otherwise the call to poll must have returned Poll::Ready, in which case the value contained in the Poll::Ready variant is used as the result of the await expression itself.

Edition differences: Await expressions are only available beginning with Rust 2018.

Task context

The task context refers to the Context which was supplied to the current async context when the async context itself was polled. Because await expressions are only legal in an async context, there must be some task context available.

Approximate desugaring

Effectively, an await expression is roughly equivalent to the following non-normative desugaring:

match operand.into_future() {
    mut pinned => loop {
        let mut pin = unsafe { Pin::new_unchecked(&mut pinned) };
        match Pin::future::poll(Pin::borrow(&mut pin), &mut current_context) {
            Poll::Ready(r) => break r,
            Poll::Pending => yield Poll::Pending,
        }
    }
}

where the yield pseudo-code returns Poll::Pending and, when re-invoked, resumes execution from that point. The variable current_context refers to the context taken from the async environment.

_ expressions

Syntax
UnderscoreExpression :
   _

Underscore expressions, denoted with the symbol _, are used to signify a placeholder in a destructuring assignment. They may only appear in the left-hand side of an assignment.

Note that this is distinct from the wildcard pattern.

Examples of _ expressions:

#![allow(unused)]
fn main() {
let p = (1, 2);
let mut a = 0;
(_, a) = p;

struct Position {
    x: u32,
    y: u32,
}

Position { x: a, y: _ } = Position{ x: 2, y: 3 };

// unused result, assignment to `_` used to declare intent and remove a warning
_ = 2 + 2;
// triggers unused_must_use warning
// 2 + 2;

// equivalent technique using a wildcard pattern in a let-binding
let _ = 2 + 2;
}

Patterns

Syntax
Pattern :
      |? PatternNoTopAlt ( | PatternNoTopAlt )*

PatternNoTopAlt :
      PatternWithoutRange
   | RangePattern

PatternWithoutRange :
      LiteralPattern
   | IdentifierPattern
   | WildcardPattern
   | RestPattern
   | ReferencePattern
   | StructPattern
   | TupleStructPattern
   | TuplePattern
   | GroupedPattern
   | SlicePattern
   | PathPattern
   | MacroInvocation

Patterns are used to match values against structures and to, optionally, bind variables to values inside these structures. They are also used in variable declarations and parameters for functions and closures.

The pattern in the following example does four things:

  • Tests if person has the car field filled with something.
  • Tests if the person’s age field is between 13 and 19, and binds its value to the person_age variable.
  • Binds a reference to the name field to the variable person_name.
  • Ignores the rest of the fields of person. The remaining fields can have any value and are not bound to any variables.
#![allow(unused)]
fn main() {
struct Car;
struct Computer;
struct Person {
    name: String,
    car: Option<Car>,
    computer: Option<Computer>,
    age: u8,
}
let person = Person {
    name: String::from("John"),
    car: Some(Car),
    computer: None,
    age: 15,
};
if let
    Person {
        car: Some(_),
        age: person_age @ 13..=19,
        name: ref person_name,
        ..
    } = person
{
    println!("{} has a car and is {} years old.", person_name, person_age);
}
}

Patterns are used in:

Destructuring

Patterns can be used to destructure structs, enums, and tuples. Destructuring breaks up a value into its component pieces. The syntax used is almost the same as when creating such values. In a pattern whose scrutinee expression has a struct, enum or tuple type, a placeholder (_) stands in for a single data field, whereas a wildcard .. stands in for all the remaining fields of a particular variant. When destructuring a data structure with named (but not numbered) fields, it is allowed to write fieldname as a shorthand for fieldname: fieldname.

#![allow(unused)]
fn main() {
enum Message {
    Quit,
    WriteString(String),
    Move { x: i32, y: i32 },
    ChangeColor(u8, u8, u8),
}
let message = Message::Quit;
match message {
    Message::Quit => println!("Quit"),
    Message::WriteString(write) => println!("{}", &write),
    Message::Move{ x, y: 0 } => println!("move {} horizontally", x),
    Message::Move{ .. } => println!("other move"),
    Message::ChangeColor { 0: red, 1: green, 2: _ } => {
        println!("color change, red: {}, green: {}", red, green);
    }
};
}

Refutability

A pattern is said to be refutable when it has the possibility of not being matched by the value it is being matched against. Irrefutable patterns, on the other hand, always match the value they are being matched against. Examples:

#![allow(unused)]
fn main() {
let (x, y) = (1, 2);               // "(x, y)" is an irrefutable pattern

if let (a, 3) = (1, 2) {           // "(a, 3)" is refutable, and will not match
    panic!("Shouldn't reach here");
} else if let (a, 4) = (3, 4) {    // "(a, 4)" is refutable, and will match
    println!("Matched ({}, 4)", a);
}
}

Literal patterns

Syntax
LiteralPattern :
      true | false
   | CHAR_LITERAL
   | BYTE_LITERAL
   | STRING_LITERAL
   | RAW_STRING_LITERAL
   | BYTE_STRING_LITERAL
   | RAW_BYTE_STRING_LITERAL
   | C_STRING_LITERAL
   | RAW_C_STRING_LITERAL
   | -? INTEGER_LITERAL
   | -? FLOAT_LITERAL

Literal patterns match exactly the same value as what is created by the literal. Since negative numbers are not literals, literal patterns also accept an optional minus sign before the literal, which acts like the negation operator.

C string and raw C string literals are accepted in literal patterns, but &CStr doesn’t implement structural equality (#[derive(Eq, PartialEq)]) and therefore any such match on a &CStr will be rejected with a type error.

Literal patterns are always refutable.

Examples:

#![allow(unused)]
fn main() {
for i in -2..5 {
    match i {
        -1 => println!("It's minus one"),
        1 => println!("It's a one"),
        2|4 => println!("It's either a two or a four"),
        _ => println!("Matched none of the arms"),
    }
}
}

Identifier patterns

Syntax
IdentifierPattern :
      ref? mut? IDENTIFIER (@ PatternNoTopAlt ) ?

Identifier patterns bind the value they match to a variable in the value namespace. The identifier must be unique within the pattern. The variable will shadow any variables of the same name in scope. The scope of the new binding depends on the context of where the pattern is used (such as a let binding or a match arm).

Patterns that consist of only an identifier, possibly with a mut, match any value and bind it to that identifier. This is the most commonly used pattern in variable declarations and parameters for functions and closures.

#![allow(unused)]
fn main() {
let mut variable = 10;
fn sum(x: i32, y: i32) -> i32 {
   x + y
}
}

To bind the matched value of a pattern to a variable, use the syntax variable @ subpattern. For example, the following binds the value 2 to e (not the entire range: the range here is a range subpattern).

#![allow(unused)]
fn main() {
let x = 2;

match x {
    e @ 1 ..= 5 => println!("got a range element {}", e),
    _ => println!("anything"),
}
}

By default, identifier patterns bind a variable to a copy of or move from the matched value depending on whether the matched value implements Copy. This can be changed to bind to a reference by using the ref keyword, or to a mutable reference using ref mut. For example:

#![allow(unused)]
fn main() {
let a = Some(10);
match a {
    None => (),
    Some(value) => (),
}

match a {
    None => (),
    Some(ref value) => (),
}
}

In the first match expression, the value is copied (or moved). In the second match, a reference to the same memory location is bound to the variable value. This syntax is needed because in destructuring subpatterns the & operator can’t be applied to the value’s fields. For example, the following is not valid:

#![allow(unused)]
fn main() {
struct Person {
   name: String,
   age: u8,
}
let value = Person { name: String::from("John"), age: 23 };
if let Person { name: &person_name, age: 18..=150 } = value { }
}

To make it valid, write the following:

#![allow(unused)]
fn main() {
struct Person {
   name: String,
   age: u8,
}
let value = Person { name: String::from("John"), age: 23 };
if let Person {name: ref person_name, age: 18..=150 } = value { }
}

Thus, ref is not something that is being matched against. Its objective is exclusively to make the matched binding a reference, instead of potentially copying or moving what was matched.

Path patterns take precedence over identifier patterns. It is an error if ref or ref mut is specified and the identifier shadows a constant.

Identifier patterns are irrefutable if the @ subpattern is irrefutable or the subpattern is not specified.

Binding modes

To service better ergonomics, patterns operate in different binding modes in order to make it easier to bind references to values. When a reference value is matched by a non-reference pattern, it will be automatically treated as a ref or ref mut binding. Example:

#![allow(unused)]
fn main() {
let x: &Option<i32> = &Some(3);
if let Some(y) = x {
    // y was converted to `ref y` and its type is &i32
}
}

Non-reference patterns include all patterns except bindings, wildcard patterns (_), const patterns of reference types, and reference patterns.

If a binding pattern does not explicitly have ref, ref mut, or mut, then it uses the default binding mode to determine how the variable is bound. The default binding mode starts in “move” mode which uses move semantics. When matching a pattern, the compiler starts from the outside of the pattern and works inwards. Each time a reference is matched using a non-reference pattern, it will automatically dereference the value and update the default binding mode. References will set the default binding mode to ref. Mutable references will set the mode to ref mut unless the mode is already ref in which case it remains ref. If the automatically dereferenced value is still a reference, it is dereferenced and this process repeats.

Move bindings and reference bindings can be mixed together in the same pattern. Doing so will result in partial move of the object bound to and the object cannot be used afterwards. This applies only if the type cannot be copied.

In the example below, name is moved out of person. Trying to use person as a whole or person.name would result in an error because of partial move.

Example:

#![allow(unused)]
fn main() {
struct Person {
   name: String,
   age: u8,
}
let person = Person{ name: String::from("John"), age: 23 };
// `name` is moved from person and `age` referenced
let Person { name, ref age } = person;
}

Wildcard pattern

Syntax
WildcardPattern :
   _

The wildcard pattern (an underscore symbol) matches any value. It is used to ignore values when they don’t matter. Inside other patterns it matches a single data field (as opposed to the .. which matches the remaining fields). Unlike identifier patterns, it does not copy, move or borrow the value it matches.

Examples:

#![allow(unused)]
fn main() {
let x = 20;
let (a, _) = (10, x);   // the x is always matched by _
assert_eq!(a, 10);

// ignore a function/closure param
let real_part = |a: f64, _: f64| { a };

// ignore a field from a struct
struct RGBA {
   r: f32,
   g: f32,
   b: f32,
   a: f32,
}
let color = RGBA{r: 0.4, g: 0.1, b: 0.9, a: 0.5};
let RGBA{r: red, g: green, b: blue, a: _} = color;
assert_eq!(color.r, red);
assert_eq!(color.g, green);
assert_eq!(color.b, blue);

// accept any Some, with any value
let x = Some(10);
if let Some(_) = x {}
}

The wildcard pattern is always irrefutable.

Rest patterns

Syntax
RestPattern :
   ..

The rest pattern (the .. token) acts as a variable-length pattern which matches zero or more elements that haven’t been matched already before and after. It may only be used in tuple, tuple struct, and slice patterns, and may only appear once as one of the elements in those patterns. It is also allowed in an identifier pattern for slice patterns only.

The rest pattern is always irrefutable.

Examples:

#![allow(unused)]
fn main() {
let words = vec!["a", "b", "c"];
let slice = &words[..];
match slice {
    [] => println!("slice is empty"),
    [one] => println!("single element {}", one),
    [head, tail @ ..] => println!("head={} tail={:?}", head, tail),
}

match slice {
    // Ignore everything but the last element, which must be "!".
    [.., "!"] => println!("!!!"),

    // `start` is a slice of everything except the last element, which must be "z".
    [start @ .., "z"] => println!("starts with: {:?}", start),

    // `end` is a slice of everything but the first element, which must be "a".
    ["a", end @ ..] => println!("ends with: {:?}", end),

    // 'whole' is the entire slice and `last` is the final element
    whole @ [.., last] => println!("the last element of {:?} is {}", whole, last),

    rest => println!("{:?}", rest),
}

if let [.., penultimate, _] = slice {
    println!("next to last is {}", penultimate);
}

let tuple = (1, 2, 3, 4, 5);
// Rest patterns may also be used in tuple and tuple struct patterns.
match tuple {
    (1, .., y, z) => println!("y={} z={}", y, z),
    (.., 5) => println!("tail must be 5"),
    (..) => println!("matches everything else"),
}
}

Range patterns

Syntax
RangePattern :
      RangeInclusivePattern
   | RangeFromPattern
   | RangeToInclusivePattern
   | ObsoleteRangePattern

RangeExclusivePattern :
      RangePatternBound .. RangePatternBound

RangeInclusivePattern :
      RangePatternBound ..= RangePatternBound

RangeFromPattern :
      RangePatternBound ..

RangeToInclusivePattern :
      ..= RangePatternBound

ObsoleteRangePattern :
   RangePatternBound ... RangePatternBound

RangePatternBound :
      CHAR_LITERAL
   | BYTE_LITERAL
   | -? INTEGER_LITERAL
   | -? FLOAT_LITERAL
   | PathExpression

Range patterns match scalar values within the range defined by their bounds. They comprise a sigil (one of .., ..=, or ...) and a bound on one or both sides. A bound on the left of the sigil is a lower bound. A bound on the right is an upper bound.

A range pattern with both a lower and upper bound will match all values between and including both of its bounds. It is written as its lower bound, followed by .. for end-exclusive or ..= for end-inclusive, followed by its upper bound. The type of the range pattern is the type unification of its upper and lower bounds.

For example, a pattern 'm'..='p' will match only the values 'm', 'n', 'o', and 'p'. Similarly, 'm'..'p' will match only 'm', 'n' and 'o', specifically not including 'p'.

The lower bound cannot be greater than the upper bound. That is, in a..=b, a ≤ b must be the case. For example, it is an error to have a range pattern 10..=0.

A range pattern with only a lower bound will match any value greater than or equal to the lower bound. It is written as its lower bound followed by .., and has the same type as its lower bound. For example, 1.. will match 1, 9, or 9001, or 9007199254740991 (if it is of an appropriate size), but not 0, and not negative numbers for signed integers.

A range pattern with only an upper bound matches any value less than or equal to the upper bound. It is written as ..= followed by its upper bound, and has the same type as its upper bound. For example, ..=10 will match 10, 1, 0, and for signed integer types, all negative values.

Range patterns with only one bound cannot be used as the top-level pattern for subpatterns in slice patterns.

The bounds is written as one of:

  • A character, byte, integer, or float literal.
  • A - followed by an integer or float literal.
  • A path

If the bounds is written as a path, after macro resolution, the path must resolve to a constant item of the type char, an integer type, or a float type.

The type and value of the bounds is dependent upon how it is written out. If the bounds is a path, the pattern has the type and value of the constant the path resolves to. For float range patterns, the constant may not be a NaN. If it is a literal, it has the type and value of the corresponding literal expression. If is a literal preceded by a -, it has the same type as the corresponding literal expression and the value of negating the value of the corresponding literal expression.

Examples:

#![allow(unused)]
fn main() {
let c = 'f';
let valid_variable = match c {
    'a'..='z' => true,
    'A'..='Z' => true,
    'α'..='ω' => true,
    _ => false,
};

let ph = 10;
println!("{}", match ph {
    0..7 => "acid",
    7 => "neutral",
    8..=14 => "base",
    _ => unreachable!(),
});

let uint: u32 = 5;
match uint {
    0 => "zero!",
    1.. => "positive number!",
};

// using paths to constants:
const TROPOSPHERE_MIN : u8 = 6;
const TROPOSPHERE_MAX : u8 = 20;

const STRATOSPHERE_MIN : u8 = TROPOSPHERE_MAX + 1;
const STRATOSPHERE_MAX : u8 = 50;

const MESOSPHERE_MIN : u8 = STRATOSPHERE_MAX + 1;
const MESOSPHERE_MAX : u8 = 85;

let altitude = 70;

println!("{}", match altitude {
    TROPOSPHERE_MIN..=TROPOSPHERE_MAX => "troposphere",
    STRATOSPHERE_MIN..=STRATOSPHERE_MAX => "stratosphere",
    MESOSPHERE_MIN..=MESOSPHERE_MAX => "mesosphere",
    _ => "outer space, maybe",
});

pub mod binary {
    pub const MEGA : u64 = 1024*1024;
    pub const GIGA : u64 = 1024*1024*1024;
}
let n_items = 20_832_425;
let bytes_per_item = 12;
if let size @ binary::MEGA..=binary::GIGA = n_items * bytes_per_item {
    println!("It fits and occupies {} bytes", size);
}

trait MaxValue {
    const MAX: u64;
}
impl MaxValue for u8 {
    const MAX: u64 = (1 << 8) - 1;
}
impl MaxValue for u16 {
    const MAX: u64 = (1 << 16) - 1;
}
impl MaxValue for u32 {
    const MAX: u64 = (1 << 32) - 1;
}
// using qualified paths:
println!("{}", match 0xfacade {
    0 ..= <u8 as MaxValue>::MAX => "fits in a u8",
    0 ..= <u16 as MaxValue>::MAX => "fits in a u16",
    0 ..= <u32 as MaxValue>::MAX => "fits in a u32",
    _ => "too big",
});
}

Range patterns for fix-width integer and char types are irrefutable when they span the entire set of possible values of a type. For example, 0u8..=255u8 is irrefutable. The range of values for an integer type is the closed range from its minimum to maximum value. The range of values for a char type are precisely those ranges containing all Unicode Scalar Values: '\u{0000}'..='\u{D7FF}' and '\u{E000}'..='\u{10FFFF}'.

Edition differences: Before the 2021 edition, range patterns with both a lower and upper bound may also be written using ... in place of ..=, with the same meaning.

Reference patterns

Syntax
ReferencePattern :
   (&|&&) mut? PatternWithoutRange

Reference patterns dereference the pointers that are being matched and, thus, borrow them.

For example, these two matches on x: &i32 are equivalent:

#![allow(unused)]
fn main() {
let int_reference = &3;

let a = match *int_reference { 0 => "zero", _ => "some" };
let b = match int_reference { &0 => "zero", _ => "some" };

assert_eq!(a, b);
}

The grammar production for reference patterns has to match the token && to match a reference to a reference because it is a token by itself, not two & tokens.

Adding the mut keyword dereferences a mutable reference. The mutability must match the mutability of the reference.

Reference patterns are always irrefutable.

Struct patterns

Syntax
StructPattern :
   PathInExpression {
      StructPatternElements ?
   }

StructPatternElements :
      StructPatternFields (, | , StructPatternEtCetera)?
   | StructPatternEtCetera

StructPatternFields :
   StructPatternField (, StructPatternField) *

StructPatternField :
   OuterAttribute *
   (
         TUPLE_INDEX : Pattern
      | IDENTIFIER : Pattern
      | ref? mut? IDENTIFIER
   )

StructPatternEtCetera :
   OuterAttribute *
   ..

Struct patterns match struct, enum, and union values that match all criteria defined by its subpatterns. They are also used to destructure a struct, enum, or union value.

On a struct pattern, the fields are referenced by name, index (in the case of tuple structs) or ignored by use of ..:

#![allow(unused)]
fn main() {
struct Point {
    x: u32,
    y: u32,
}
let s = Point {x: 1, y: 1};

match s {
    Point {x: 10, y: 20} => (),
    Point {y: 10, x: 20} => (),    // order doesn't matter
    Point {x: 10, ..} => (),
    Point {..} => (),
}

struct PointTuple (
    u32,
    u32,
);
let t = PointTuple(1, 2);

match t {
    PointTuple {0: 10, 1: 20} => (),
    PointTuple {1: 10, 0: 20} => (),   // order doesn't matter
    PointTuple {0: 10, ..} => (),
    PointTuple {..} => (),
}

enum Message {
    Quit,
    Move { x: i32, y: i32 },
}
let m = Message::Quit;

match m {
    Message::Quit => (),
    Message::Move {x: 10, y: 20} => (),
    Message::Move {..} => (),
}
}

If .. is not used, a struct pattern used to match a struct is required to specify all fields:

#![allow(unused)]
fn main() {
struct Struct {
   a: i32,
   b: char,
   c: bool,
}
let mut struct_value = Struct{a: 10, b: 'X', c: false};

match struct_value {
    Struct{a: 10, b: 'X', c: false} => (),
    Struct{a: 10, b: 'X', ref c} => (),
    Struct{a: 10, b: 'X', ref mut c} => (),
    Struct{a: 10, b: 'X', c: _} => (),
    Struct{a: _, b: _, c: _} => (),
}
}

A struct pattern used to match a union must specify exactly one field (see Pattern matching on unions).

The ref and/or mut IDENTIFIER syntax matches any value and binds it to a variable with the same name as the given field.

#![allow(unused)]
fn main() {
struct Struct {
   a: i32,
   b: char,
   c: bool,
}
let struct_value = Struct{a: 10, b: 'X', c: false};

let Struct{a: x, b: y, c: z} = struct_value;          // destructure all fields
}

A struct pattern is refutable if the PathInExpression resolves to a constructor of an enum with more than one variant, or one of its subpatterns is refutable.

Tuple struct patterns

Syntax
TupleStructPattern :
   PathInExpression ( TupleStructItems? )

TupleStructItems :
   Pattern ( , Pattern )* ,?

Tuple struct patterns match tuple struct and enum values that match all criteria defined by its subpatterns. They are also used to destructure a tuple struct or enum value.

A tuple struct pattern is refutable if the PathInExpression resolves to a constructor of an enum with more than one variant, or one of its subpatterns is refutable.

Tuple patterns

Syntax
TuplePattern :
   ( TuplePatternItems? )

TuplePatternItems :
      Pattern ,
   | RestPattern
   | Pattern (, Pattern)+ ,?

Tuple patterns match tuple values that match all criteria defined by its subpatterns. They are also used to destructure a tuple.

The form (..) with a single RestPattern is a special form that does not require a comma, and matches a tuple of any size.

The tuple pattern is refutable when one of its subpatterns is refutable.

An example of using tuple patterns:

#![allow(unused)]
fn main() {
let pair = (10, "ten");
let (a, b) = pair;

assert_eq!(a, 10);
assert_eq!(b, "ten");
}

Grouped patterns

Syntax
GroupedPattern :
   ( Pattern )

Enclosing a pattern in parentheses can be used to explicitly control the precedence of compound patterns. For example, a reference pattern next to a range pattern such as &0..=5 is ambiguous and is not allowed, but can be expressed with parentheses.

#![allow(unused)]
fn main() {
let int_reference = &3;
match int_reference {
    &(0..=5) => (),
    _ => (),
}
}

Slice patterns

Syntax
SlicePattern :
   [ SlicePatternItems? ]

SlicePatternItems :
   Pattern (, Pattern)* ,?

Slice patterns can match both arrays of fixed size and slices of dynamic size.

#![allow(unused)]
fn main() {
// Fixed size
let arr = [1, 2, 3];
match arr {
    [1, _, _] => "starts with one",
    [a, b, c] => "starts with something else",
};
}
#![allow(unused)]
fn main() {
// Dynamic size
let v = vec![1, 2, 3];
match v[..] {
    [a, b] => { /* this arm will not apply because the length doesn't match */ }
    [a, b, c] => { /* this arm will apply */ }
    _ => { /* this wildcard is required, since the length is not known statically */ }
};
}

Slice patterns are irrefutable when matching an array as long as each element is irrefutable. When matching a slice, it is irrefutable only in the form with a single .. rest pattern or identifier pattern with the .. rest pattern as a subpattern.

Within a slice, a range pattern without both lower and upper bound must be enclosed in parentheses, as in (a..), to clarify it is intended to match against a single slice element. A range pattern with both lower and upper bound, like a..=b, is not required to be enclosed in parentheses.

Path patterns

Syntax
PathPattern :
      PathExpression

Path patterns are patterns that refer either to constant values or to structs or enum variants that have no fields.

Unqualified path patterns can refer to:

  • enum variants
  • structs
  • constants
  • associated constants

Qualified path patterns can only refer to associated constants.

Path patterns are irrefutable when they refer to structs or an enum variant when the enum has only one variant or a constant whose type is irrefutable. They are refutable when they refer to refutable constants or enum variants for enums with multiple variants.

Constant patterns

When a constant C of type T is used as a pattern, we first check that T: PartialEq. Furthermore we require that the value of C has (recursive) structural equality, which is defined recursively as follows:

  • Integers as well as str, bool and char values always have structural equality.
  • Tuples, arrays, and slices have structural equality if all their fields/elements have structural equality. (In particular, () and [] always have structural equality.)
  • References have structural equality if the value they point to has structural equality.
  • A value of struct or enum type has structural equality if its PartialEq instance is derived via #[derive(PartialEq)], and all fields (for enums: of the active variant) have structural equality.
  • A raw pointer has structural equality if it was defined as a constant integer (and then cast/transmuted).
  • A float value has structural equality if it is not a NaN.
  • Nothing else has structural equality.

In particular, the value of C must be known at pattern-building time (which is pre-monomorphization). This means that associated consts that involve generic parameters cannot be used as patterns.

After ensuring all conditions are met, the constant value is translated into a pattern, and now behaves exactly as-if that pattern had been written directly. In particular, it fully participates in exhaustiveness checking. (For raw pointers, constants are the only way to write such patterns. Only _ is ever considered exhaustive for these types.)

Or-patterns

Or-patterns are patterns that match on one of two or more sub-patterns (for example A | B | C). They can nest arbitrarily. Syntactically, or-patterns are allowed in any of the places where other patterns are allowed (represented by the Pattern production), with the exceptions of let-bindings and function and closure arguments (represented by the PatternNoTopAlt production).

Static semantics

  1. Given a pattern p | q at some depth for some arbitrary patterns p and q, the pattern is considered ill-formed if:

    • the type inferred for p does not unify with the type inferred for q, or
    • the same set of bindings are not introduced in p and q, or
    • the type of any two bindings with the same name in p and q do not unify with respect to types or binding modes.

    Unification of types is in all instances aforementioned exact and implicit type coercions do not apply.

  2. When type checking an expression match e_s { a_1 => e_1, ... a_n => e_n }, for each match arm a_i which contains a pattern of form p_i | q_i, the pattern p_i | q_i is considered ill formed if, at the depth d where it exists the fragment of e_s at depth d, the type of the expression fragment does not unify with p_i | q_i.

  3. With respect to exhaustiveness checking, a pattern p | q is considered to cover p as well as q. For some constructor c(x, ..) the distributive law applies such that c(p | q, ..rest) covers the same set of value as c(p, ..rest) | c(q, ..rest) does. This can be applied recursively until there are no more nested patterns of form p | q other than those that exist at the top level.

    Note that by “constructor” we do not refer to tuple struct patterns, but rather we refer to a pattern for any product type. This includes enum variants, tuple structs, structs with named fields, arrays, tuples, and slices.

Dynamic semantics

  1. The dynamic semantics of pattern matching a scrutinee expression e_s against a pattern c(p | q, ..rest) at depth d where c is some constructor, p and q are arbitrary patterns, and rest is optionally any remaining potential factors in c, is defined as being the same as that of c(p, ..rest) | c(q, ..rest).

Precedence with other undelimited patterns

As shown elsewhere in this chapter, there are several types of patterns that are syntactically undelimited, including identifier patterns, reference patterns, and or-patterns. Or-patterns always have the lowest-precedence. This allows us to reserve syntactic space for a possible future type ascription feature and also to reduce ambiguity. For example, x @ A(..) | B(..) will result in an error that x is not bound in all patterns. &A(x) | B(x) will result in a type mismatch between x in the different subpatterns.

Type system

Types

Every variable, item, and value in a Rust program has a type. The type of a value defines the interpretation of the memory holding it and the operations that may be performed on the value.

Built-in types are tightly integrated into the language, in nontrivial ways that are not possible to emulate in user-defined types. User-defined types have limited capabilities.

The list of types is:

Type expressions

Syntax
Type :
      TypeNoBounds
   | ImplTraitType
   | TraitObjectType

TypeNoBounds :
      ParenthesizedType
   | ImplTraitTypeOneBound
   | TraitObjectTypeOneBound
   | TypePath
   | TupleType
   | NeverType
   | RawPointerType
   | ReferenceType
   | ArrayType
   | SliceType
   | InferredType
   | QualifiedPathInType
   | BareFunctionType
   | MacroInvocation

A type expression as defined in the Type grammar rule above is the syntax for referring to a type. It may refer to:

Parenthesized types

ParenthesizedType :
   ( Type )

In some situations the combination of types may be ambiguous. Use parentheses around a type to avoid ambiguity. For example, the + operator for type boundaries within a reference type is unclear where the boundary applies, so the use of parentheses is required. Grammar rules that require this disambiguation use the TypeNoBounds rule instead of Type.

#![allow(unused)]
fn main() {
use std::any::Any;
type T<'a> = &'a (dyn Any + Send);
}

Recursive types

Nominal types — structs, enumerations, and unions — may be recursive. That is, each enum variant or struct or union field may refer, directly or indirectly, to the enclosing enum or struct type itself. Such recursion has restrictions:

  • Recursive types must include a nominal type in the recursion (not mere type aliases, or other structural types such as arrays or tuples). So type Rec = &'static [Rec] is not allowed.
  • The size of a recursive type must be finite; in other words the recursive fields of the type must be pointer types.

An example of a recursive type and its use:

#![allow(unused)]
fn main() {
enum List<T> {
    Nil,
    Cons(T, Box<List<T>>)
}

let a: List<i32> = List::Cons(7, Box::new(List::Cons(13, Box::new(List::Nil))));
}

Boolean type

#![allow(unused)]
fn main() {
let b: bool = true;
}

The boolean type or bool is a primitive data type that can take on one of two values, called true and false.

Values of this type may be created using a literal expression using the keywords true and false corresponding to the value of the same name.

This type is a part of the language prelude with the name bool.

An object with the boolean type has a size and alignment of 1 each. The value false has the bit pattern 0x00 and the value true has the bit pattern 0x01. It is undefined behavior for an object with the boolean type to have any other bit pattern.

The boolean type is the type of many operands in various expressions:

Note: The boolean type acts similarly to but is not an enumerated type. In practice, this mostly means that constructors are not associated to the type (e.g. bool::true).

Like all primitives, the boolean type implements the traits Clone, Copy, Sized, Send, and Sync.

Note: See the standard library docs for library operations.

Operations on boolean values

When using certain operator expressions with a

boolean type for its operands, they evaluate using the rules of boolean logic.

Logical not

b!b
truefalse
falsetrue

Logical or

aba | b
truetruetrue
truefalsetrue
falsetruetrue
falsefalsefalse

Logical and

aba & b
truetruetrue
truefalsefalse
falsetruefalse
falsefalsefalse

Logical xor

aba ^ b
truetruefalse
truefalsetrue
falsetruetrue
falsefalsefalse

Comparisons

aba == b
truetruetrue
truefalsefalse
falsetruefalse
falsefalsetrue
aba > b
truetruefalse
truefalsetrue
falsetruefalse
falsefalsefalse
  • a != b is the same as !(a == b)
  • a >= b is the same as a == b | a > b
  • a < b is the same as !(a >= b)
  • a <= b is the same as a == b | a < b

Bit validity

The single byte of a bool is guaranteed to be initialized (in other words, transmute::<bool, u8>(...) is always sound – but since some bit patterns are invalid bools, the inverse is not always sound).

Numeric types

Integer types

The unsigned integer types consist of:

TypeMinimumMaximum
u8028-1
u160216-1
u320232-1
u640264-1
u12802128-1

The signed two’s complement integer types consist of:

TypeMinimumMaximum
i8-(27)27-1
i16-(215)215-1
i32-(231)231-1
i64-(263)263-1
i128-(2127)2127-1

Floating-point types

The IEEE 754-2008 “binary32” and “binary64” floating-point types are f32 and f64, respectively.

Machine-dependent integer types

The usize type is an unsigned integer type with the same number of bits as the platform’s pointer type. It can represent every memory address in the process.

The isize type is a signed integer type with the same number of bits as the platform’s pointer type. The theoretical upper bound on object and array size is the maximum isize value. This ensures that isize can be used to calculate differences between pointers into an object or array and can address every byte within an object along with one byte past the end.

usize and isize are at least 16-bits wide.

Note: Many pieces of Rust code may assume that pointers, usize, and isize are either 32-bit or 64-bit. As a consequence, 16-bit pointer support is limited and may require explicit care and acknowledgment from a library to support.

Bit validity

For every numeric type, T, the bit validity of T is equivalent to the bit validity of [u8; size_of::<T>()]. An uninitialized byte is not a valid u8.

Textual types

The types char and str hold textual data.

A value of type char is a Unicode scalar value (i.e. a code point that is not a surrogate), represented as a 32-bit unsigned word in the 0x0000 to 0xD7FF or 0xE000 to 0x10FFFF range. It is immediate undefined behavior to create a char that falls outside this range. A [char] is effectively a UCS-4 / UTF-32 string of length 1.

A value of type str is represented the same way as [u8], a slice of 8-bit unsigned bytes. However, the Rust standard library makes extra assumptions about str: methods working on str assume and ensure that the data in there is valid UTF-8. Calling a str method with a non-UTF-8 buffer can cause undefined behavior now or in the future.

Since str is a dynamically sized type, it can only be instantiated through a pointer type, such as &str.

Layout and bit validity

char is guaranteed to have the same size and alignment as u32 on all platforms.

Every byte of a char is guaranteed to be initialized (in other words, transmute::<char, [u8; size_of::<char>()]>(...) is always sound – but since some bit patterns are invalid chars, the inverse is not always sound).

Never type

Syntax
NeverType : !

The never type ! is a type with no values, representing the result of computations that never complete. Expressions of type ! can be coerced into any other type.

The ! type can only appear in function return types presently, indicating it is a diverging function that never returns.

#![allow(unused)]
fn main() {
fn foo() -> ! {
    panic!("This call never returns.");
}
}
#![allow(unused)]
fn main() {
unsafe extern "C" {
    pub safe fn no_return_extern_func() -> !;
}
}

Tuple types

Syntax
TupleType :
      ( )
   | ( ( Type , )+ Type? )

Tuple types are a family of structural types1 for heterogeneous lists of other types.

The syntax for a tuple type is a parenthesized, comma-separated list of types. 1-ary tuples require a comma after their element type to be disambiguated with a parenthesized type.

A tuple type has a number of fields equal to the length of the list of types. This number of fields determines the arity of the tuple. A tuple with n fields is called an n-ary tuple. For example, a tuple with 2 fields is a 2-ary tuple.

Fields of tuples are named using increasing numeric names matching their position in the list of types. The first field is 0. The second field is 1. And so on. The type of each field is the type of the same position in the tuple’s list of types.

For convenience and historical reasons, the tuple type with no fields (()) is often called unit or the unit type. Its one value is also called unit or the unit value.

Some examples of tuple types:

  • () (unit)
  • (i32,) (1-ary tuple)
  • (f64, f64)
  • (String, i32)
  • (i32, String) (different type from the previous example)
  • (i32, f64, Vec<String>, Option<bool>)

Values of this type are constructed using a tuple expression. Furthermore, various expressions will produce the unit value if there is no other meaningful value for it to evaluate to. Tuple fields can be accessed by either a tuple index expression or pattern matching.

1

Structural types are always equivalent if their internal types are equivalent. For a nominal version of tuples, see tuple structs.

Array types

Syntax
ArrayType :
   [ Type ; Expression ]

An array is a fixed-size sequence of N elements of type T. The array type is written as [T; N]. The size is a constant expression that evaluates to a usize.

Examples:

#![allow(unused)]
fn main() {
// A stack-allocated array
let array: [i32; 3] = [1, 2, 3];

// A heap-allocated array, coerced to a slice
let boxed_array: Box<[i32]> = Box::new([1, 2, 3]);
}

All elements of arrays are always initialized, and access to an array is always bounds-checked in safe methods and operators.

Note: The Vec<T> standard library type provides a heap-allocated resizable array type.

Slice types

Syntax
SliceType :
   [ Type ]

A slice is a dynamically sized type representing a ‘view’ into a sequence of elements of type T. The slice type is written as [T].

Slice types are generally used through pointer types. For example:

  • &[T]: a ‘shared slice’, often just called a ‘slice’. It doesn’t own the data it points to; it borrows it.
  • &mut [T]: a ‘mutable slice’. It mutably borrows the data it points to.
  • Box<[T]>: a ‘boxed slice’

Examples:

#![allow(unused)]
fn main() {
// A heap-allocated array, coerced to a slice
let boxed_array: Box<[i32]> = Box::new([1, 2, 3]);

// A (shared) slice into an array
let slice: &[i32] = &boxed_array[..];
}

All elements of slices are always initialized, and access to a slice is always bounds-checked in safe methods and operators.

Struct types

A struct type is a heterogeneous product of other types, called the fields of the type.1

New instances of a struct can be constructed with a struct expression.

The memory layout of a struct is undefined by default to allow for compiler optimizations like field reordering, but it can be fixed with the repr attribute. In either case, fields may be given in any order in a corresponding struct expression; the resulting struct value will always have the same memory layout.

The fields of a struct may be qualified by visibility modifiers, to allow access to data in a struct outside a module.

A tuple struct type is just like a struct type, except that the fields are anonymous.

A unit-like struct type is like a struct type, except that it has no fields. The one value constructed by the associated struct expression is the only value that inhabits such a type.

1

struct types are analogous to struct types in C, the record types of the ML family, or the struct types of the Lisp family.

Enumerated types

An enumerated type is a nominal, heterogeneous disjoint union type, denoted by the name of an enum item. 1

An enum item declares both the type and a number of variants, each of which is independently named and has the syntax of a struct, tuple struct or unit-like struct.

New instances of an enum can be constructed with a struct expression.

Any enum value consumes as much memory as the largest variant for its corresponding enum type, as well as the size needed to store a discriminant.

Enum types cannot be denoted structurally as types, but must be denoted by named reference to an enum item.

1

The enum type is analogous to a data constructor declaration in Haskell, or a pick ADT in Limbo.

Union types

A union type is a nominal, heterogeneous C-like union, denoted by the name of a union item.

Unions have no notion of an “active field”. Instead, every union access transmutes parts of the content of the union to the type of the accessed field. Since transmutes can cause unexpected or undefined behaviour, unsafe is required to read from a union field. Union field types are also restricted to a subset of types which ensures that they never need dropping. See the item documentation for further details.

The memory layout of a union is undefined by default (in particular, fields do not have to be at offset 0), but the #[repr(...)] attribute can be used to fix a layout.

Function item types

When referred to, a function item, or the constructor of a tuple-like struct or enum variant, yields a zero-sized value of its function item type. That type explicitly identifies the function - its name, its type arguments, and its early-bound lifetime arguments (but not its late-bound lifetime arguments, which are only assigned when the function is called) - so the value does not need to contain an actual function pointer, and no indirection is needed when the function is called.

There is no syntax that directly refers to a function item type, but the compiler will display the type as something like fn(u32) -> i32 {fn_name} in error messages.

Because the function item type explicitly identifies the function, the item types of different functions - different items, or the same item with different generics - are distinct, and mixing them will create a type error:

#![allow(unused)]
fn main() {
fn foo<T>() { }
let x = &mut foo::<i32>;
*x = foo::<u32>; //~ ERROR mismatched types
}

However, there is a coercion from function items to function pointers with the same signature, which is triggered not only when a function item is used when a function pointer is directly expected, but also when different function item types with the same signature meet in different arms of the same if or match:

#![allow(unused)]
fn main() {
let want_i32 = false;
fn foo<T>() { }

// `foo_ptr_1` has function pointer type `fn()` here
let foo_ptr_1: fn() = foo::<i32>;

// ... and so does `foo_ptr_2` - this type-checks.
let foo_ptr_2 = if want_i32 {
    foo::<i32>
} else {
    foo::<u32>
};
}

All function items implement Fn, FnMut, FnOnce, Copy, Clone, Send, and Sync.

Closure types

A closure expression produces a closure value with a unique, anonymous type that cannot be written out. A closure type is approximately equivalent to a struct which contains the captured variables. For instance, the following closure:

#![allow(unused)]
fn main() {
fn f<F : FnOnce() -> String> (g: F) {
    println!("{}", g());
}

let mut s = String::from("foo");
let t = String::from("bar");

f(|| {
    s += &t;
    s
});
// Prints "foobar".
}

generates a closure type roughly like the following:

struct Closure<'a> {
    s : String,
    t : &'a String,
}

impl<'a> FnOnce<()> for Closure<'a> {
    type Output = String;
    fn call_once(self) -> String {
        self.s += &*self.t;
        self.s
    }
}

so that the call to f works as if it were:

f(Closure{s: s, t: &t});

Capture modes

The compiler prefers to capture a closed-over variable by immutable borrow, followed by unique immutable borrow (see below), by mutable borrow, and finally by move. It will pick the first choice of these that is compatible with how the captured variable is used inside the closure body. The compiler does not take surrounding code into account, such as the lifetimes of involved variables, or of the closure itself.

If the move keyword is used, then all captures are by move or, for Copy types, by copy, regardless of whether a borrow would work. The move keyword is usually used to allow the closure to outlive the captured values, such as if the closure is being returned or used to spawn a new thread.

Composite types such as structs, tuples, and enums are always captured entirely, not by individual fields. It may be necessary to borrow into a local variable in order to capture a single field:

#![allow(unused)]
fn main() {
use std::collections::HashSet;

struct SetVec {
    set: HashSet<u32>,
    vec: Vec<u32>
}

impl SetVec {
    fn populate(&mut self) {
        let vec = &mut self.vec;
        self.set.iter().for_each(|&n| {
            vec.push(n);
        })
    }
}
}

If, instead, the closure were to use self.vec directly, then it would attempt to capture self by mutable reference. But since self.set is already borrowed to iterate over, the code would not compile.

Unique immutable borrows in captures

Captures can occur by a special kind of borrow called a unique immutable borrow, which cannot be used anywhere else in the language and cannot be written out explicitly. It occurs when modifying the referent of a mutable reference, as in the following example:

#![allow(unused)]
fn main() {
let mut b = false;
let x = &mut b;
{
    let mut c = || { *x = true; };
    // The following line is an error:
    // let y = &x;
    c();
}
let z = &x;
}

In this case, borrowing x mutably is not possible, because x is not mut. But at the same time, borrowing x immutably would make the assignment illegal, because a & &mut reference might not be unique, so it cannot safely be used to modify a value. So a unique immutable borrow is used: it borrows x immutably, but like a mutable borrow, it must be unique. In the above example, uncommenting the declaration of y will produce an error because it would violate the uniqueness of the closure’s borrow of x; the declaration of z is valid because the closure’s lifetime has expired at the end of the block, releasing the borrow.

Call traits and coercions

Closure types all implement FnOnce, indicating that they can be called once by consuming ownership of the closure. Additionally, some closures implement more specific call traits:

  • A closure which does not move out of any captured variables implements FnMut, indicating that it can be called by mutable reference.

  • A closure which does not mutate or move out of any captured variables implements Fn, indicating that it can be called by shared reference.

Note: move closures may still implement Fn or FnMut, even though they capture variables by move. This is because the traits implemented by a closure type are determined by what the closure does with captured values, not how it captures them.

Non-capturing closures are closures that don’t capture anything from their environment. They can be coerced to function pointers (e.g., fn()) with the matching signature.

#![allow(unused)]
fn main() {
let add = |x, y| x + y;

let mut x = add(5,7);

type Binop = fn(i32, i32) -> i32;
let bo: Binop = add;
x = bo(5,7);
}

Other traits

All closure types implement Sized. Additionally, closure types implement the following traits if allowed to do so by the types of the captures it stores:

The rules for Send and Sync match those for normal struct types, while Clone and Copy behave as if derived. For Clone, the order of cloning of the captured variables is left unspecified.

Because captures are often by reference, the following general rules arise:

  • A closure is Sync if all captured variables are Sync.
  • A closure is Send if all variables captured by non-unique immutable reference are Sync, and all values captured by unique immutable or mutable reference, copy, or move are Send.
  • A closure is Clone or Copy if it does not capture any values by unique immutable or mutable reference, and if all values it captures by copy or move are Clone or Copy, respectively.

Pointer types

All pointers are explicit first-class values. They can be moved or copied, stored into data structs, and returned from functions.

References (& and &mut)

Syntax
ReferenceType :
   & Lifetime? mut? TypeNoBounds

Shared references (&)

Shared references point to memory which is owned by some other value. When a shared reference to a value is created, it prevents direct mutation of the value. Interior mutability provides an exception for this in certain circumstances. As the name suggests, any number of shared references to a value may exist. A shared reference type is written &type, or &'a type when you need to specify an explicit lifetime. Copying a reference is a “shallow” operation: it involves only copying the pointer itself, that is, pointers are Copy. Releasing a reference has no effect on the value it points to, but referencing of a temporary value will keep it alive during the scope of the reference itself.

Mutable references (&mut)

Mutable references point to memory which is owned by some other value. A mutable reference type is written &mut type or &'a mut type. A mutable reference (that hasn’t been borrowed) is the only way to access the value it points to, so is not Copy.

Raw pointers (*const and *mut)

Syntax
RawPointerType :
   * ( mut | const ) TypeNoBounds

Raw pointers are pointers without safety or liveness guarantees. Raw pointers are written as *const T or *mut T. For example *const i32 means a raw pointer to a 32-bit integer. Copying or dropping a raw pointer has no effect on the lifecycle of any other value. Dereferencing a raw pointer is an unsafe operation. This can also be used to convert a raw pointer to a reference by reborrowing it (&* or &mut *). Raw pointers are generally discouraged; they exist to support interoperability with foreign code, and writing performance-critical or low-level functions.

When comparing raw pointers they are compared by their address, rather than by what they point to. When comparing raw pointers to dynamically sized types they also have their additional data compared.

Raw pointers can be created directly using &raw const for *const pointers and &raw mut for *mut pointers.

Smart Pointers

The standard library contains additional ‘smart pointer’ types beyond references and raw pointers.

Bit validity

Despite pointers and references being similar to usizes in the machine code emitted on most platforms, the semantics of transmuting a reference or pointer type to a non-pointer type is currently undecided. Thus, it may not be valid to transmute a pointer or reference type, P, to a [u8; size_of::<P>()].

For thin raw pointers (i.e., for P = *const T or P = *mut T for T: Sized), the inverse direction (transmuting from an integer or array of integers to P) is always valid. However, the pointer produced via such a transmutation may not be dereferenced (not even if T has size zero).

Function pointer types

Syntax
BareFunctionType :
   ForLifetimes? FunctionTypeQualifiers fn
      ( FunctionParametersMaybeNamedVariadic? ) BareFunctionReturnType?

FunctionTypeQualifiers:
   unsafe? (extern Abi?)?

BareFunctionReturnType:
   -> TypeNoBounds

FunctionParametersMaybeNamedVariadic :
   MaybeNamedFunctionParameters | MaybeNamedFunctionParametersVariadic

MaybeNamedFunctionParameters :
   MaybeNamedParam ( , MaybeNamedParam )* ,?

MaybeNamedParam :
   OuterAttribute* ( ( IDENTIFIER | _ ) : )? Type

MaybeNamedFunctionParametersVariadic :
   ( MaybeNamedParam , )* MaybeNamedParam , OuterAttribute* ...

Function pointer types, written using the fn keyword, refer to a function whose identity is not necessarily known at compile-time. They can be created via a coercion from both function items and non-capturing closures.

The unsafe qualifier indicates that the type’s value is an unsafe function, and the extern qualifier indicates it is an extern function.

Variadic parameters can only be specified with extern function types with the "C" or "cdecl" calling convention.

An example where Binop is defined as a function pointer type:

#![allow(unused)]
fn main() {
fn add(x: i32, y: i32) -> i32 {
    x + y
}

let mut x = add(5,7);

type Binop = fn(i32, i32) -> i32;
let bo: Binop = add;
x = bo(5,7);
}

Attributes on function pointer parameters

Attributes on function pointer parameters follow the same rules and restrictions as regular function parameters.

Trait objects

Syntax
TraitObjectType :
   dyn? TypeParamBounds

TraitObjectTypeOneBound :
   dyn? TraitBound

A trait object is an opaque value of another type that implements a set of traits. The set of traits is made up of an object safe base trait plus any number of auto traits.

Trait objects implement the base trait, its auto traits, and any supertraits of the base trait.

Trait objects are written as the keyword dyn followed by a set of trait bounds, but with the following restrictions on the trait bounds. All traits except the first trait must be auto traits, there may not be more than one lifetime, and opt-out bounds (e.g. ?Sized) are not allowed. Furthermore, paths to traits may be parenthesized.

For example, given a trait Trait, the following are all trait objects:

  • dyn Trait
  • dyn Trait + Send
  • dyn Trait + Send + Sync
  • dyn Trait + 'static
  • dyn Trait + Send + 'static
  • dyn Trait +
  • dyn 'static + Trait.
  • dyn (Trait)

Edition differences: Before the 2021 edition, the dyn keyword may be omitted.

Note: For clarity, it is recommended to always use the dyn keyword on your trait objects unless your codebase supports compiling with Rust 1.26 or lower.

Edition differences: In the 2015 edition, if the first bound of the trait object is a path that starts with ::, then the dyn will be treated as a part of the path. The first path can be put in parenthesis to get around this. As such, if you want a trait object with the trait ::your_module::Trait, you should write it as dyn (::your_module::Trait).

Beginning in the 2018 edition, dyn is a true keyword and is not allowed in paths, so the parentheses are not necessary.

Two trait object types alias each other if the base traits alias each other and if the sets of auto traits are the same and the lifetime bounds are the same. For example, dyn Trait + Send + UnwindSafe is the same as dyn Trait + UnwindSafe + Send.

Due to the opaqueness of which concrete type the value is of, trait objects are dynamically sized types. Like all DSTs, trait objects are used behind some type of pointer; for example &dyn SomeTrait or Box<dyn SomeTrait>. Each instance of a pointer to a trait object includes:

  • a pointer to an instance of a type T that implements SomeTrait
  • a virtual method table, often just called a vtable, which contains, for each method of SomeTrait and its supertraits that T implements, a pointer to T’s implementation (i.e. a function pointer).

The purpose of trait objects is to permit “late binding” of methods. Calling a method on a trait object results in virtual dispatch at runtime: that is, a function pointer is loaded from the trait object vtable and invoked indirectly. The actual implementation for each vtable entry can vary on an object-by-object basis.

An example of a trait object:

trait Printable {
    fn stringify(&self) -> String;
}

impl Printable for i32 {
    fn stringify(&self) -> String { self.to_string() }
}

fn print(a: Box<dyn Printable>) {
    println!("{}", a.stringify());
}

fn main() {
    print(Box::new(10) as Box<dyn Printable>);
}

In this example, the trait Printable occurs as a trait object in both the type signature of print, and the cast expression in main.

Trait Object Lifetime Bounds

Since a trait object can contain references, the lifetimes of those references need to be expressed as part of the trait object. This lifetime is written as Trait + 'a. There are defaults that allow this lifetime to usually be inferred with a sensible choice.

Impl trait

Syntax
ImplTraitType : impl TypeParamBounds

ImplTraitTypeOneBound : impl TraitBound

impl Trait provides ways to specify unnamed but concrete types that implement a specific trait. It can appear in two sorts of places: argument position (where it can act as an anonymous type parameter to functions), and return position (where it can act as an abstract return type).

#![allow(unused)]
fn main() {
trait Trait {}
impl Trait for () {}

// argument position: anonymous type parameter
fn foo(arg: impl Trait) {
}

// return position: abstract return type
fn bar() -> impl Trait {
}
}

Anonymous type parameters

Note: This is often called “impl Trait in argument position”. (The term “parameter” is more correct here, but “impl Trait in argument position” is the phrasing used during the development of this feature, and it remains in parts of the implementation.)

Functions can use impl followed by a set of trait bounds to declare a parameter as having an anonymous type. The caller must provide a type that satisfies the bounds declared by the anonymous type parameter, and the function can only use the methods available through the trait bounds of the anonymous type parameter.

For example, these two forms are almost equivalent:

#![allow(unused)]
fn main() {
trait Trait {}

// generic type parameter
fn with_generic_type<T: Trait>(arg: T) {
}

// impl Trait in argument position
fn with_impl_trait(arg: impl Trait) {
}
}

That is, impl Trait in argument position is syntactic sugar for a generic type parameter like <T: Trait>, except that the type is anonymous and doesn’t appear in the GenericParams list.

Note: For function parameters, generic type parameters and impl Trait are not exactly equivalent. With a generic parameter such as <T: Trait>, the caller has the option to explicitly specify the generic argument for T at the call site using GenericArgs, for example, foo::<usize>(1). Changing a parameter from either one to the other can constitute a breaking change for the callers of a function, since this changes the number of generic arguments.

Abstract return types

Note: This is often called “impl Trait in return position”.

Functions can use impl Trait to return an abstract return type. These types stand in for another concrete type where the caller may only use the methods declared by the specified Trait. Each possible return value from the function must resolve to the same concrete type.

impl Trait in return position allows a function to return an unboxed abstract type. This is particularly useful with closures and iterators. For example, closures have a unique, un-writable type. Previously, the only way to return a closure from a function was to use a trait object:

#![allow(unused)]
fn main() {
fn returns_closure() -> Box<dyn Fn(i32) -> i32> {
    Box::new(|x| x + 1)
}
}

This could incur performance penalties from heap allocation and dynamic dispatch. It wasn’t possible to fully specify the type of the closure, only to use the Fn trait. That means that the trait object is necessary. However, with impl Trait, it is possible to write this more simply:

#![allow(unused)]
fn main() {
fn returns_closure() -> impl Fn(i32) -> i32 {
    |x| x + 1
}
}

which also avoids the drawbacks of using a boxed trait object.

Similarly, the concrete types of iterators could become very complex, incorporating the types of all previous iterators in a chain. Returning impl Iterator means that a function only exposes the Iterator trait as a bound on its return type, instead of explicitly specifying all of the other iterator types involved.

Return-position impl Trait in traits and trait implementations

Functions in traits may also use impl Trait as a syntax for an anonymous associated type.

Every impl Trait in the return type of an associated function in a trait is desugared to an anonymous associated type. The return type that appears in the implementation’s function signature is used to determine the value of the associated type.

Differences between generics and impl Trait in return position

In argument position, impl Trait is very similar in semantics to a generic type parameter. However, there are significant differences between the two in return position. With impl Trait, unlike with a generic type parameter, the function chooses the return type, and the caller cannot choose the return type.

The function:

#![allow(unused)]
fn main() {
trait Trait {}
fn foo<T: Trait>() -> T {
    // ...
panic!()
}
}

allows the caller to determine the return type, T, and the function returns that type.

The function:

#![allow(unused)]
fn main() {
trait Trait {}
impl Trait for () {}
fn foo() -> impl Trait {
    // ...
}
}

doesn’t allow the caller to determine the return type. Instead, the function chooses the return type, but only promises that it will implement Trait.

Limitations

impl Trait can only appear as a parameter or return type of a non-extern function. It cannot be the type of a let binding, field type, or appear inside a type alias.

Type parameters

Within the body of an item that has type parameter declarations, the names of its type parameters are types:

#![allow(unused)]
fn main() {
fn to_vec<A: Clone>(xs: &[A]) -> Vec<A> {
    if xs.is_empty() {
        return vec![];
    }
    let first: A = xs[0].clone();
    let mut rest: Vec<A> = to_vec(&xs[1..]);
    rest.insert(0, first);
    rest
}
}

Here, first has type A, referring to to_vec’s A type parameter; and rest has type Vec<A>, a vector with element type A.

Inferred type

Syntax
InferredType : _

The inferred type asks the compiler to infer the type if possible based on the surrounding information available. It cannot be used in item signatures. It is often used in generic arguments:

#![allow(unused)]
fn main() {
let x: Vec<_> = (0..10).collect();
}

Dynamically Sized Types

Most types have a fixed size that is known at compile time and implement the trait Sized. A type with a size that is known only at run-time is called a dynamically sized type (DST) or, informally, an unsized type. Slices and trait objects are two examples of DSTs. Such types can only be used in certain cases:

  • Pointer types to DSTs are sized but have twice the size of pointers to sized types
    • Pointers to slices also store the number of elements of the slice.
    • Pointers to trait objects also store a pointer to a vtable.
  • DSTs can be provided as type arguments to generic type parameters having the special ?Sized bound. They can also be used for associated type definitions when the corresponding associated type declaration has a ?Sized bound. By default, any type parameter or associated type has a Sized bound, unless it is relaxed using ?Sized.
  • Traits may be implemented for DSTs. Unlike with generic type parameters, Self: ?Sized is the default in trait definitions.
  • Structs may contain a DST as the last field; this makes the struct itself a DST.

Note: variables, function parameters, const items, and static items must be Sized.

Type Layout

The layout of a type is its size, alignment, and the relative offsets of its fields. For enums, how the discriminant is laid out and interpreted is also part of type layout.

Type layout can be changed with each compilation. Instead of trying to document exactly what is done, we only document what is guaranteed today.

Size and Alignment

All values have an alignment and size.

The alignment of a value specifies what addresses are valid to store the value at. A value of alignment n must only be stored at an address that is a multiple of n. For example, a value with an alignment of 2 must be stored at an even address, while a value with an alignment of 1 can be stored at any address. Alignment is measured in bytes, and must be at least 1, and always a power of 2. The alignment of a value can be checked with the align_of_val function.

The size of a value is the offset in bytes between successive elements in an array with that item type including alignment padding. The size of a value is always a multiple of its alignment. Note that some types are zero-sized; 0 is considered a multiple of any alignment (for example, on some platforms, the type [u16; 0] has size 0 and alignment 2). The size of a value can be checked with the size_of_val function.

Types where all values have the same size and alignment, and both are known at compile time, implement the Sized trait and can be checked with the size_of and align_of functions. Types that are not Sized are known as dynamically sized types. Since all values of a Sized type share the same size and alignment, we refer to those shared values as the size of the type and the alignment of the type respectively.

Primitive Data Layout

The size of most primitives is given in this table.

Typesize_of::<Type>()
bool1
u8 / i81
u16 / i162
u32 / i324
u64 / i648
u128 / i12816
usize / isizeSee below
f324
f648
char4

usize and isize have a size big enough to contain every address on the target platform. For example, on a 32 bit target, this is 4 bytes, and on a 64 bit target, this is 8 bytes.

The alignment of primitives is platform-specific. In most cases, their alignment is equal to their size, but it may be less. In particular, i128 and u128 are often aligned to 4 or 8 bytes even though their size is 16, and on many 32-bit platforms, i64, u64, and f64 are only aligned to 4 bytes, not 8.

Pointers and References Layout

Pointers and references have the same layout. Mutability of the pointer or reference does not change the layout.

Pointers to sized types have the same size and alignment as usize.

Pointers to unsized types are sized. The size and alignment is guaranteed to be at least equal to the size and alignment of a pointer.

Note: Though you should not rely on this, all pointers to DSTs are currently twice the size of the size of usize and have the same alignment.

Array Layout

An array of [T; N] has a size of size_of::<T>() * N and the same alignment of T. Arrays are laid out so that the zero-based nth element of the array is offset from the start of the array by n * size_of::<T>() bytes.

Slice Layout

Slices have the same layout as the section of the array they slice.

Note: This is about the raw [T] type, not pointers (&[T], Box<[T]>, etc.) to slices.

str Layout

String slices are a UTF-8 representation of characters that have the same layout as slices of type [u8].

Tuple Layout

Tuples are laid out according to the Rust representation.

The exception to this is the unit tuple (()), which is guaranteed as a zero-sized type to have a size of 0 and an alignment of 1.

Trait Object Layout

Trait objects have the same layout as the value the trait object is of.

Note: This is about the raw trait object types, not pointers (&dyn Trait, Box<dyn Trait>, etc.) to trait objects.

Closure Layout

Closures have no layout guarantees.

Representations

All user-defined composite types (structs, enums, and unions) have a representation that specifies what the layout is for the type. The possible representations for a type are:

The representation of a type can be changed by applying the repr attribute to it. The following example shows a struct with a C representation.

#![allow(unused)]
fn main() {
#[repr(C)]
struct ThreeInts {
    first: i16,
    second: i8,
    third: i32
}
}

The alignment may be raised or lowered with the align and packed modifiers respectively. They alter the representation specified in the attribute. If no representation is specified, the default one is altered.

#![allow(unused)]
fn main() {
// Default representation, alignment lowered to 2.
#[repr(packed(2))]
struct PackedStruct {
    first: i16,
    second: i8,
    third: i32
}

// C representation, alignment raised to 8
#[repr(C, align(8))]
struct AlignedStruct {
    first: i16,
    second: i8,
    third: i32
}
}

Note: As a consequence of the representation being an attribute on the item, the representation does not depend on generic parameters. Any two types with the same name have the same representation. For example, Foo<Bar> and Foo<Baz> both have the same representation.

The representation of a type can change the padding between fields, but does not change the layout of the fields themselves. For example, a struct with a C representation that contains a struct Inner with the default representation will not change the layout of Inner.

The Rust Representation

The Rust representation is the default representation for nominal types without a repr attribute. Using this representation explicitly through a repr attribute is guaranteed to be the same as omitting the attribute entirely.

The only data layout guarantees made by this representation are those required for soundness. They are:

  1. The fields are properly aligned.
  2. The fields do not overlap.
  3. The alignment of the type is at least the maximum alignment of its fields.

Formally, the first guarantee means that the offset of any field is divisible by that field’s alignment. The second guarantee means that the fields can be ordered such that the offset plus the size of any field is less than or equal to the offset of the next field in the ordering. The ordering does not have to be the same as the order in which the fields are specified in the declaration of the type.

Be aware that the second guarantee does not imply that the fields have distinct addresses: zero-sized types may have the same address as other fields in the same struct.

There are no other guarantees of data layout made by this representation.

The C Representation

The C representation is designed for dual purposes. One purpose is for creating types that are interoperable with the C Language. The second purpose is to create types that you can soundly perform operations on that rely on data layout such as reinterpreting values as a different type.

Because of this dual purpose, it is possible to create types that are not useful for interfacing with the C programming language.

This representation can be applied to structs, unions, and enums. The exception is zero-variant enums for which the C representation is an error.

#[repr(C)] Structs

The alignment of the struct is the alignment of the most-aligned field in it.

The size and offset of fields is determined by the following algorithm.

Start with a current offset of 0 bytes.

For each field in declaration order in the struct, first determine the size and alignment of the field. If the current offset is not a multiple of the field’s alignment, then add padding bytes to the current offset until it is a multiple of the field’s alignment. The offset for the field is what the current offset is now. Then increase the current offset by the size of the field.

Finally, the size of the struct is the current offset rounded up to the nearest multiple of the struct’s alignment.

Here is this algorithm described in pseudocode.

/// Returns the amount of padding needed after `offset` to ensure that the
/// following address will be aligned to `alignment`.
fn padding_needed_for(offset: usize, alignment: usize) -> usize {
    let misalignment = offset % alignment;
    if misalignment > 0 {
        // round up to next multiple of `alignment`
        alignment - misalignment
    } else {
        // already a multiple of `alignment`
        0
    }
}

struct.alignment = struct.fields().map(|field| field.alignment).max();

let current_offset = 0;

for field in struct.fields_in_declaration_order() {
    // Increase the current offset so that it's a multiple of the alignment
    // of this field. For the first field, this will always be zero.
    // The skipped bytes are called padding bytes.
    current_offset += padding_needed_for(current_offset, field.alignment);

    struct[field].offset = current_offset;

    current_offset += field.size;
}

struct.size = current_offset + padding_needed_for(current_offset, struct.alignment);

Warning: This pseudocode uses a naive algorithm that ignores overflow issues for the sake of clarity. To perform memory layout computations in actual code, use Layout.

Note: This algorithm can produce zero-sized structs. In C, an empty struct declaration like struct Foo { } is illegal. However, both gcc and clang support options to enable such structs, and assign them size zero. C++, in contrast, gives empty structs a size of 1, unless they are inherited from or they are fields that have the [[no_unique_address]] attribute, in which case they do not increase the overall size of the struct.

#[repr(C)] Unions

A union declared with #[repr(C)] will have the same size and alignment as an equivalent C union declaration in the C language for the target platform. The union will have a size of the maximum size of all of its fields rounded to its alignment, and an alignment of the maximum alignment of all of its fields. These maximums may come from different fields.

#![allow(unused)]
fn main() {
#[repr(C)]
union Union {
    f1: u16,
    f2: [u8; 4],
}

assert_eq!(std::mem::size_of::<Union>(), 4);  // From f2
assert_eq!(std::mem::align_of::<Union>(), 2); // From f1

#[repr(C)]
union SizeRoundedUp {
   a: u32,
   b: [u16; 3],
}

assert_eq!(std::mem::size_of::<SizeRoundedUp>(), 8);  // Size of 6 from b,
                                                      // rounded up to 8 from
                                                      // alignment of a.
assert_eq!(std::mem::align_of::<SizeRoundedUp>(), 4); // From a
}

#[repr(C)] Field-less Enums

For field-less enums, the C representation has the size and alignment of the default enum size and alignment for the target platform’s C ABI.

Note: The enum representation in C is implementation defined, so this is really a “best guess”. In particular, this may be incorrect when the C code of interest is compiled with certain flags.

Warning: There are crucial differences between an enum in the C language and Rust’s field-less enums with this representation. An enum in C is mostly a typedef plus some named constants; in other words, an object of an enum type can hold any integer value. For example, this is often used for bitflags in C. In contrast, Rust’s field-less enums can only legally hold the discriminant values, everything else is undefined behavior. Therefore, using a field-less enum in FFI to model a C enum is often wrong.

#[repr(C)] Enums With Fields

The representation of a repr(C) enum with fields is a repr(C) struct with two fields, also called a “tagged union” in C:

  • a repr(C) version of the enum with all fields removed (“the tag”)
  • a repr(C) union of repr(C) structs for the fields of each variant that had them (“the payload”)

Note: Due to the representation of repr(C) structs and unions, if a variant has a single field there is no difference between putting that field directly in the union or wrapping it in a struct; any system which wishes to manipulate such an enum’s representation may therefore use whichever form is more convenient or consistent for them.

#![allow(unused)]
fn main() {
// This Enum has the same representation as ...
#[repr(C)]
enum MyEnum {
    A(u32),
    B(f32, u64),
    C { x: u32, y: u8 },
    D,
 }

// ... this struct.
#[repr(C)]
struct MyEnumRepr {
    tag: MyEnumDiscriminant,
    payload: MyEnumFields,
}

// This is the discriminant enum.
#[repr(C)]
enum MyEnumDiscriminant { A, B, C, D }

// This is the variant union.
#[repr(C)]
union MyEnumFields {
    A: MyAFields,
    B: MyBFields,
    C: MyCFields,
    D: MyDFields,
}

#[repr(C)]
#[derive(Copy, Clone)]
struct MyAFields(u32);

#[repr(C)]
#[derive(Copy, Clone)]
struct MyBFields(f32, u64);

#[repr(C)]
#[derive(Copy, Clone)]
struct MyCFields { x: u32, y: u8 }

// This struct could be omitted (it is a zero-sized type), and it must be in
// C/C++ headers.
#[repr(C)]
#[derive(Copy, Clone)]
struct MyDFields;
}

Note: unions with non-Copy fields are unstable, see 55149.

Primitive representations

The primitive representations are the representations with the same names as the primitive integer types. That is: u8, u16, u32, u64, u128, usize, i8, i16, i32, i64, i128, and isize.

Primitive representations can only be applied to enumerations and have different behavior whether the enum has fields or no fields. It is an error for zero-variant enums to have a primitive representation. Combining two primitive representations together is an error.

Primitive Representation of Field-less Enums

For field-less enums, primitive representations set the size and alignment to be the same as the primitive type of the same name. For example, a field-less enum with a u8 representation can only have discriminants between 0 and 255 inclusive.

Primitive Representation of Enums With Fields

The representation of a primitive representation enum is a repr(C) union of repr(C) structs for each variant with a field. The first field of each struct in the union is the primitive representation version of the enum with all fields removed (“the tag”) and the remaining fields are the fields of that variant.

Note: This representation is unchanged if the tag is given its own member in the union, should that make manipulation more clear for you (although to follow the C++ standard the tag member should be wrapped in a struct).

#![allow(unused)]
fn main() {
// This enum has the same representation as ...
#[repr(u8)]
enum MyEnum {
    A(u32),
    B(f32, u64),
    C { x: u32, y: u8 },
    D,
 }

// ... this union.
#[repr(C)]
union MyEnumRepr {
    A: MyVariantA,
    B: MyVariantB,
    C: MyVariantC,
    D: MyVariantD,
}

// This is the discriminant enum.
#[repr(u8)]
#[derive(Copy, Clone)]
enum MyEnumDiscriminant { A, B, C, D }

#[repr(C)]
#[derive(Clone, Copy)]
struct MyVariantA(MyEnumDiscriminant, u32);

#[repr(C)]
#[derive(Clone, Copy)]
struct MyVariantB(MyEnumDiscriminant, f32, u64);

#[repr(C)]
#[derive(Clone, Copy)]
struct MyVariantC { tag: MyEnumDiscriminant, x: u32, y: u8 }

#[repr(C)]
#[derive(Clone, Copy)]
struct MyVariantD(MyEnumDiscriminant);
}

Note: unions with non-Copy fields are unstable, see 55149.

Combining primitive representations of enums with fields and #[repr(C)]

For enums with fields, it is also possible to combine repr(C) and a primitive representation (e.g., repr(C, u8)). This modifies the repr(C) by changing the representation of the discriminant enum to the chosen primitive instead. So, if you chose the u8 representation, then the discriminant enum would have a size and alignment of 1 byte.

The discriminant enum from the example earlier then becomes:

#![allow(unused)]
fn main() {
#[repr(C, u8)] // `u8` was added
enum MyEnum {
    A(u32),
    B(f32, u64),
    C { x: u32, y: u8 },
    D,
 }

// ...

#[repr(u8)] // So `u8` is used here instead of `C`
enum MyEnumDiscriminant { A, B, C, D }

// ...
}

For example, with a repr(C, u8) enum it is not possible to have 257 unique discriminants (“tags”) whereas the same enum with only a repr(C) attribute will compile without any problems.

Using a primitive representation in addition to repr(C) can change the size of an enum from the repr(C) form:

#![allow(unused)]
fn main() {
#[repr(C)]
enum EnumC {
    Variant0(u8),
    Variant1,
}

#[repr(C, u8)]
enum Enum8 {
    Variant0(u8),
    Variant1,
}

#[repr(C, u16)]
enum Enum16 {
    Variant0(u8),
    Variant1,
}

// The size of the C representation is platform dependant
assert_eq!(std::mem::size_of::<EnumC>(), 8);
// One byte for the discriminant and one byte for the value in Enum8::Variant0
assert_eq!(std::mem::size_of::<Enum8>(), 2);
// Two bytes for the discriminant and one byte for the value in Enum16::Variant0
// plus one byte of padding.
assert_eq!(std::mem::size_of::<Enum16>(), 4);
}

The alignment modifiers

The align and packed modifiers can be used to respectively raise or lower the alignment of structs and unions. packed may also alter the padding between fields (although it will not alter the padding inside of any field). On their own, align and packed do not provide guarantees about the order of fields in the layout of a struct or the layout of an enum variant, although they may be combined with representations (such as C) which do provide such guarantees.

The alignment is specified as an integer parameter in the form of #[repr(align(x))] or #[repr(packed(x))]. The alignment value must be a power of two from 1 up to 229. For packed, if no value is given, as in #[repr(packed)], then the value is 1.

For align, if the specified alignment is less than the alignment of the type without the align modifier, then the alignment is unaffected.

For packed, if the specified alignment is greater than the type’s alignment without the packed modifier, then the alignment and layout is unaffected. The alignments of each field, for the purpose of positioning fields, is the smaller of the specified alignment and the alignment of the field’s type. Inter-field padding is guaranteed to be the minimum required in order to satisfy each field’s (possibly altered) alignment (although note that, on its own, packed does not provide any guarantee about field ordering). An important consequence of these rules is that a type with #[repr(packed(1))] (or #[repr(packed)]) will have no inter-field padding.

The align and packed modifiers cannot be applied on the same type and a packed type cannot transitively contain another aligned type. align and packed may only be applied to the Rust and C representations.

The align modifier can also be applied on an enum. When it is, the effect on the enum’s alignment is the same as if the enum was wrapped in a newtype struct with the same align modifier.

Note: References to unaligned fields are not allowed because it is undefined behavior. When fields are unaligned due to an alignment modifier, consider the following options for using references and dereferences:

#![allow(unused)]
fn main() {
#[repr(packed)]
struct Packed {
    f1: u8,
    f2: u16,
}
let mut e = Packed { f1: 1, f2: 2 };
// Instead of creating a reference to a field, copy the value to a local variable.
let x = e.f2;
// Or in situations like `println!` which creates a reference, use braces
// to change it to a copy of the value.
println!("{}", {e.f2});
// Or if you need a pointer, use the unaligned methods for reading and writing
// instead of dereferencing the pointer directly.
let ptr: *const u16 = &raw const e.f2;
let value = unsafe { ptr.read_unaligned() };
let mut_ptr: *mut u16 = &raw mut e.f2;
unsafe { mut_ptr.write_unaligned(3) }
}

The transparent Representation

The transparent representation can only be used on a struct or an enum with a single variant that has:

  • any number of fields with size 0 and alignment 1 (e.g. PhantomData<T>), and
  • at most one other field.

Structs and enums with this representation have the same layout and ABI as the only non-size 0 non-alignment 1 field, if present, or unit otherwise.

This is different than the C representation because a struct with the C representation will always have the ABI of a C struct while, for example, a struct with the transparent representation with a primitive field will have the ABI of the primitive field.

Because this representation delegates type layout to another type, it cannot be used with any other representation.

Interior Mutability

Sometimes a type needs to be mutated while having multiple aliases. In Rust this is achieved using a pattern called interior mutability. A type has interior mutability if its internal state can be changed through a shared reference to it. This goes against the usual requirement that the value pointed to by a shared reference is not mutated.

std::cell::UnsafeCell<T> type is the only allowed way to disable this requirement. When UnsafeCell<T> is immutably aliased, it is still safe to mutate, or obtain a mutable reference to, the T it contains. As with all other types, it is undefined behavior to have multiple &mut UnsafeCell<T> aliases.

Other types with interior mutability can be created by using UnsafeCell<T> as a field. The standard library provides a variety of types that provide safe interior mutability APIs. For example, std::cell::RefCell<T> uses run-time borrow checks to ensure the usual rules around multiple references. The std::sync::atomic module contains types that wrap a value that is only accessed with atomic operations, allowing the value to be shared and mutated across threads.

Subtyping and Variance

Subtyping is implicit and can occur at any stage in type checking or inference. Subtyping is restricted to two cases: variance with respect to lifetimes and between types with higher ranked lifetimes. If we were to erase lifetimes from types, then the only subtyping would be due to type equality.

Consider the following example: string literals always have 'static lifetime. Nevertheless, we can assign s to t:

#![allow(unused)]
fn main() {
fn bar<'a>() {
    let s: &'static str = "hi";
    let t: &'a str = s;
}
}

Since 'static outlives the lifetime parameter 'a, &'static str is a subtype of &'a str.

Higher-ranked function pointers and trait objects have another subtype relation. They are subtypes of types that are given by substitutions of the higher-ranked lifetimes. Some examples:

#![allow(unused)]
fn main() {
// Here 'a is substituted for 'static
let subtype: &(for<'a> fn(&'a i32) -> &'a i32) = &((|x| x) as fn(&_) -> &_);
let supertype: &(fn(&'static i32) -> &'static i32) = subtype;

// This works similarly for trait objects
let subtype: &(dyn for<'a> Fn(&'a i32) -> &'a i32) = &|x| x;
let supertype: &(dyn Fn(&'static i32) -> &'static i32) = subtype;

// We can also substitute one higher-ranked lifetime for another
let subtype: &(for<'a, 'b> fn(&'a i32, &'b i32))= &((|x, y| {}) as fn(&_, &_));
let supertype: &for<'c> fn(&'c i32, &'c i32) = subtype;
}

Variance

Variance is a property that generic types have with respect to their arguments. A generic type’s variance in a parameter is how the subtyping of the parameter affects the subtyping of the type.

  • F<T> is covariant over T if T being a subtype of U implies that F<T> is a subtype of F<U> (subtyping “passes through”)
  • F<T> is contravariant over T if T being a subtype of U implies that F<U> is a subtype of F<T>
  • F<T> is invariant over T otherwise (no subtyping relation can be derived)

Variance of types is automatically determined as follows

TypeVariance in 'aVariance in T
&'a Tcovariantcovariant
&'a mut Tcovariantinvariant
*const Tcovariant
*mut Tinvariant
[T] and [T; n]covariant
fn() -> Tcovariant
fn(T) -> ()contravariant
std::cell::UnsafeCell<T>invariant
std::marker::PhantomData<T>covariant
dyn Trait<T> + 'acovariantinvariant

The variance of other struct, enum, and union types is decided by looking at the variance of the types of their fields. If the parameter is used in positions with different variances then the parameter is invariant. For example the following struct is covariant in 'a and T and invariant in 'b, 'c, and U.

#![allow(unused)]
fn main() {
use std::cell::UnsafeCell;
struct Variance<'a, 'b, 'c, T, U: 'a> {
    x: &'a U,               // This makes `Variance` covariant in 'a, and would
                            // make it covariant in U, but U is used later
    y: *const T,            // Covariant in T
    z: UnsafeCell<&'b f64>, // Invariant in 'b
    w: *mut U,              // Invariant in U, makes the whole struct invariant

    f: fn(&'c ()) -> &'c () // Both co- and contravariant, makes 'c invariant
                            // in the struct.
}
}

When used outside of an struct, enum, or union, the variance for parameters is checked at each location separately.

#![allow(unused)]
fn main() {
use std::cell::UnsafeCell;
fn generic_tuple<'short, 'long: 'short>(
    // 'long is used inside of a tuple in both a co- and invariant position.
    x: (&'long u32, UnsafeCell<&'long u32>),
) {
    // As the variance at these positions is computed separately,
    // we can freely shrink 'long in the covariant position.
    let _: (&'short u32, UnsafeCell<&'long u32>) = x;
}

fn takes_fn_ptr<'short, 'middle: 'short>(
    // 'middle is used in both a co- and contravariant position.
    f: fn(&'middle ()) -> &'middle (),
) {
    // As the variance at these positions is computed separately,
    // we can freely shrink 'middle in the covariant position
    // and extend it in the contravariant position.
    let _: fn(&'static ()) -> &'short () = f;
}
}

Trait and lifetime bounds

Syntax
TypeParamBounds :
   TypeParamBound ( + TypeParamBound )* +?

TypeParamBound :
      Lifetime | TraitBound

TraitBound :
      ?? ForLifetimes? TypePath
   | ( ?? ForLifetimes? TypePath )

LifetimeBounds :
   ( Lifetime + )* Lifetime?

Lifetime :
      LIFETIME_OR_LABEL
   | 'static

Trait and lifetime bounds provide a way for generic items to restrict which types and lifetimes are used as their parameters. Bounds can be provided on any type in a where clause. There are also shorter forms for certain common cases:

  • Bounds written after declaring a generic parameter: fn f<A: Copy>() {} is the same as fn f<A>() where A: Copy {}.
  • In trait declarations as supertraits: trait Circle : Shape {} is equivalent to trait Circle where Self : Shape {}.
  • In trait declarations as bounds on associated types: trait A { type B: Copy; } is equivalent to trait A where Self::B: Copy { type B; }.

Bounds on an item must be satisfied when using the item. When type checking and borrow checking a generic item, the bounds can be used to determine that a trait is implemented for a type. For example, given Ty: Trait

  • In the body of a generic function, methods from Trait can be called on Ty values. Likewise associated constants on the Trait can be used.
  • Associated types from Trait can be used.
  • Generic functions and types with a T: Trait bounds can be used with Ty being used for T.
#![allow(unused)]
fn main() {
type Surface = i32;
trait Shape {
    fn draw(&self, surface: Surface);
    fn name() -> &'static str;
}

fn draw_twice<T: Shape>(surface: Surface, sh: T) {
    sh.draw(surface);           // Can call method because T: Shape
    sh.draw(surface);
}

fn copy_and_draw_twice<T: Copy>(surface: Surface, sh: T) where T: Shape {
    let shape_copy = sh;        // doesn't move sh because T: Copy
    draw_twice(surface, sh);    // Can use generic function because T: Shape
}

struct Figure<S: Shape>(S, S);

fn name_figure<U: Shape>(
    figure: Figure<U>,          // Type Figure<U> is well-formed because U: Shape
) {
    println!(
        "Figure of two {}",
        U::name(),              // Can use associated function
    );
}
}

Bounds that don’t use the item’s parameters or higher-ranked lifetimes are checked when the item is defined. It is an error for such a bound to be false.

Copy, Clone, and Sized bounds are also checked for certain generic types when using the item, even if the use does not provide a concrete type. It is an error to have Copy or Clone as a bound on a mutable reference, trait object, or slice. It is an error to have Sized as a bound on a trait object or slice.

#![allow(unused)]
fn main() {
struct A<'a, T>
where
    i32: Default,           // Allowed, but not useful
    i32: Iterator,          // Error: `i32` is not an iterator
    &'a mut T: Copy,        // (at use) Error: the trait bound is not satisfied
    [T]: Sized,             // (at use) Error: size cannot be known at compilation
{
    f: &'a T,
}
struct UsesA<'a, T>(A<'a, T>);
}

Trait and lifetime bounds are also used to name trait objects.

?Sized

? is only used to relax the implicit Sized trait bound for type parameters or associated types. ?Sized may not be used as a bound for other types.

Lifetime bounds

Lifetime bounds can be applied to types or to other lifetimes. The bound 'a: 'b is usually read as 'a outlives 'b. 'a: 'b means that 'a lasts at least as long as 'b, so a reference &'a () is valid whenever &'b () is valid.

#![allow(unused)]
fn main() {
fn f<'a, 'b>(x: &'a i32, mut y: &'b i32) where 'a: 'b {
    y = x;                      // &'a i32 is a subtype of &'b i32 because 'a: 'b
    let r: &'b &'a i32 = &&0;   // &'b &'a i32 is well formed because 'a: 'b
}
}

T: 'a means that all lifetime parameters of T outlive 'a. For example, if 'a is an unconstrained lifetime parameter, then i32: 'static and &'static str: 'a are satisfied, but Vec<&'a ()>: 'static is not.

Higher-ranked trait bounds

ForLifetimes :
   for GenericParams

Trait bounds may be higher ranked over lifetimes. These bounds specify a bound that is true for all lifetimes. For example, a bound such as for<'a> &'a T: PartialEq<i32> would require an implementation like

#![allow(unused)]
fn main() {
struct T;
impl<'a> PartialEq<i32> for &'a T {
    // ...
   fn eq(&self, other: &i32) -> bool {true}
}
}

and could then be used to compare a &'a T with any lifetime to an i32.

Only a higher-ranked bound can be used here, because the lifetime of the reference is shorter than any possible lifetime parameter on the function:

#![allow(unused)]
fn main() {
fn call_on_ref_zero<F>(f: F) where for<'a> F: Fn(&'a i32) {
    let zero = 0;
    f(&zero);
}
}

Higher-ranked lifetimes may also be specified just before the trait: the only difference is the scope of the lifetime parameter, which extends only to the end of the following trait instead of the whole bound. This function is equivalent to the last one.

#![allow(unused)]
fn main() {
fn call_on_ref_zero<F>(f: F) where F: for<'a> Fn(&'a i32) {
    let zero = 0;
    f(&zero);
}
}

Implied bounds

Lifetime bounds required for types to be well-formed are sometimes inferred.

#![allow(unused)]
fn main() {
fn requires_t_outlives_a<'a, T>(x: &'a T) {}
}

The type parameter T is required to outlive 'a for the type &'a T to be well-formed. This is inferred because the function signature contains the type &'a T which is only valid if T: 'a holds.

Implied bounds are added for all parameters and outputs of functions. Inside of requires_t_outlives_a you can assume T: 'a to hold even if you don’t explicitly specify this:

#![allow(unused)]
fn main() {
fn requires_t_outlives_a_not_implied<'a, T: 'a>() {}

fn requires_t_outlives_a<'a, T>(x: &'a T) {
    // This compiles, because `T: 'a` is implied by
    // the reference type `&'a T`.
    requires_t_outlives_a_not_implied::<'a, T>();
}
}
#![allow(unused)]
fn main() {
fn requires_t_outlives_a_not_implied<'a, T: 'a>() {}
fn not_implied<'a, T>() {
    // This errors, because `T: 'a` is not implied by
    // the function signature.
    requires_t_outlives_a_not_implied::<'a, T>();
}
}

Only lifetime bounds are implied, trait bounds still have to be explicitly added. The following example therefore causes an error:

#![allow(unused)]
fn main() {
use std::fmt::Debug;
struct IsDebug<T: Debug>(T);
// error[E0277]: `T` doesn't implement `Debug`
fn doesnt_specify_t_debug<T>(x: IsDebug<T>) {}
}

Lifetime bounds are also inferred for type definitions and impl blocks for any type:

#![allow(unused)]
fn main() {
struct Struct<'a, T> {
    // This requires `T: 'a` to be well-formed
    // which is inferred by the compiler.
    field: &'a T,
}

enum Enum<'a, T> {
    // This requires `T: 'a` to be well-formed,
    // which is inferred by the compiler.
    //
    // Note that `T: 'a` is required even when only
    // using `Enum::OtherVariant`.
    SomeVariant(&'a T),
    OtherVariant,
}

trait Trait<'a, T: 'a> {}

// This would error because `T: 'a` is not implied by any type
// in the impl header.
//     impl<'a, T> Trait<'a, T> for () {}

// This compiles as `T: 'a` is implied by the self type `&'a T`.
impl<'a, T> Trait<'a, T> for &'a T {}
}

Type coercions

Type coercions are implicit operations that change the type of a value. They happen automatically at specific locations and are highly restricted in what types actually coerce.

Any conversions allowed by coercion can also be explicitly performed by the type cast operator, as.

Coercions are originally defined in RFC 401 and expanded upon in RFC 1558.

Coercion sites

A coercion can only occur at certain coercion sites in a program; these are typically places where the desired type is explicit or can be derived by propagation from explicit types (without type inference). Possible coercion sites are:

  • let statements where an explicit type is given.

    For example, &mut 42 is coerced to have type &i8 in the following:

    #![allow(unused)]
    fn main() {
    let _: &i8 = &mut 42;
    }
  • static and const item declarations (similar to let statements).

  • Arguments for function calls

    The value being coerced is the actual parameter, and it is coerced to the type of the formal parameter.

    For example, &mut 42 is coerced to have type &i8 in the following:

    fn bar(_: &i8) { }
    
    fn main() {
        bar(&mut 42);
    }

    For method calls, the receiver (self parameter) type is coerced differently, see the documentation on method-call expressions for details.

  • Instantiations of struct, union, or enum variant fields

    For example, &mut 42 is coerced to have type &i8 in the following:

    struct Foo<'a> { x: &'a i8 }
    
    fn main() {
        Foo { x: &mut 42 };
    }
  • Function results—either the final line of a block if it is not semicolon-terminated or any expression in a return statement

    For example, x is coerced to have type &dyn Display in the following:

    #![allow(unused)]
    fn main() {
    use std::fmt::Display;
    fn foo(x: &u32) -> &dyn Display {
        x
    }
    }

If the expression in one of these coercion sites is a coercion-propagating expression, then the relevant sub-expressions in that expression are also coercion sites. Propagation recurses from these new coercion sites. Propagating expressions and their relevant sub-expressions are:

  • Array literals, where the array has type [U; n]. Each sub-expression in the array literal is a coercion site for coercion to type U.

  • Array literals with repeating syntax, where the array has type [U; n]. The repeated sub-expression is a coercion site for coercion to type U.

  • Tuples, where a tuple is a coercion site to type (U_0, U_1, ..., U_n). Each sub-expression is a coercion site to the respective type, e.g. the zeroth sub-expression is a coercion site to type U_0.

  • Parenthesized sub-expressions ((e)): if the expression has type U, then the sub-expression is a coercion site to U.

  • Blocks: if a block has type U, then the last expression in the block (if it is not semicolon-terminated) is a coercion site to U. This includes blocks which are part of control flow statements, such as if/else, if the block has a known type.

Coercion types

Coercion is allowed between the following types:

  • T to U if T is a subtype of U (reflexive case)

  • T_1 to T_3 where T_1 coerces to T_2 and T_2 coerces to T_3 (transitive case)

    Note that this is not fully supported yet.

  • &mut T to &T

  • *mut T to *const T

  • &T to *const T

  • &mut T to *mut T

  • &T or &mut T to &U if T implements Deref<Target = U>. For example:

    use std::ops::Deref;
    
    struct CharContainer {
        value: char,
    }
    
    impl Deref for CharContainer {
        type Target = char;
    
        fn deref<'a>(&'a self) -> &'a char {
            &self.value
        }
    }
    
    fn foo(arg: &char) {}
    
    fn main() {
        let x = &mut CharContainer { value: 'y' };
        foo(x); //&mut CharContainer is coerced to &char.
    }
  • &mut T to &mut U if T implements DerefMut<Target = U>.

  • TyCtor(T) to TyCtor(U), where TyCtor(T) is one of

    • &T
    • &mut T
    • *const T
    • *mut T
    • Box<T>

    and where U can be obtained from T by unsized coercion.

  • Function item types to fn pointers

  • Non capturing closures to fn pointers

  • ! to any T

Unsized Coercions

The following coercions are called unsized coercions, since they relate to converting sized types to unsized types, and are permitted in a few cases where other coercions are not, as described above. They can still happen anywhere else a coercion can occur.

Two traits, Unsize and CoerceUnsized, are used to assist in this process and expose it for library use. The following coercions are built-ins and, if T can be coerced to U with one of them, then an implementation of Unsize<U> for T will be provided:

  • [T; n] to [T].

  • T to dyn U, when T implements U + Sized, and U is object safe.

  • Foo<..., T, ...> to Foo<..., U, ...>, when:

    • Foo is a struct.
    • T implements Unsize<U>.
    • The last field of Foo has a type involving T.
    • If that field has type Bar<T>, then Bar<T> implements Unsized<Bar<U>>.
    • T is not part of the type of any other fields.

Additionally, a type Foo<T> can implement CoerceUnsized<Foo<U>> when T implements Unsize<U> or CoerceUnsized<Foo<U>>. This allows it to provide an unsized coercion to Foo<U>.

Note: While the definition of the unsized coercions and their implementation has been stabilized, the traits themselves are not yet stable and therefore can’t be used directly in stable Rust.

Least upper bound coercions

In some contexts, the compiler must coerce together multiple types to try and find the most general type. This is called a “Least Upper Bound” coercion. LUB coercion is used and only used in the following situations:

  • To find the common type for a series of if branches.
  • To find the common type for a series of match arms.
  • To find the common type for array elements.
  • To find the type for the return type of a closure with multiple return statements.
  • To check the type for the return type of a function with multiple return statements.

In each such case, there are a set of types T0..Tn to be mutually coerced to some target type T_t, which is unknown to start. Computing the LUB coercion is done iteratively. The target type T_t begins as the type T0. For each new type Ti, we consider whether

  • If Ti can be coerced to the current target type T_t, then no change is made.
  • Otherwise, check whether T_t can be coerced to Ti; if so, the T_t is changed to Ti. (This check is also conditioned on whether all of the source expressions considered thus far have implicit coercions.)
  • If not, try to compute a mutual supertype of T_t and Ti, which will become the new target type.

Examples:

#![allow(unused)]
fn main() {
let (a, b, c) = (0, 1, 2);
// For if branches
let bar = if true {
    a
} else if false {
    b
} else {
    c
};

// For match arms
let baw = match 42 {
    0 => a,
    1 => b,
    _ => c,
};

// For array elements
let bax = [a, b, c];

// For closure with multiple return statements
let clo = || {
    if true {
        a
    } else if false {
        b
    } else {
        c
    }
};
let baz = clo();

// For type checking of function with multiple return statements
fn foo() -> i32 {
    let (a, b, c) = (0, 1, 2);
    match 42 {
        0 => a,
        1 => b,
        _ => c,
    }
}
}

In these examples, types of the ba* are found by LUB coercion. And the compiler checks whether LUB coercion result of a, b, c is i32 in the processing of the function foo.

Caveat

This description is obviously informal. Making it more precise is expected to proceed as part of a general effort to specify the Rust type checker more precisely.

Destructors

When an initialized variable or temporary goes out of scope, its destructor is run, or it is dropped. Assignment also runs the destructor of its left-hand operand, if it’s initialized. If a variable has been partially initialized, only its initialized fields are dropped.

The destructor of a type T consists of:

  1. If T: Drop, calling <T as std::ops::Drop>::drop
  2. Recursively running the destructor of all of its fields.
    • The fields of a struct are dropped in declaration order.
    • The fields of the active enum variant are dropped in declaration order.
    • The fields of a tuple are dropped in order.
    • The elements of an array or owned slice are dropped from the first element to the last.
    • The variables that a closure captures by move are dropped in an unspecified order.
    • Trait objects run the destructor of the underlying type.
    • Other types don’t result in any further drops.

If a destructor must be run manually, such as when implementing your own smart pointer, std::ptr::drop_in_place can be used.

Some examples:

#![allow(unused)]
fn main() {
struct PrintOnDrop(&'static str);

impl Drop for PrintOnDrop {
    fn drop(&mut self) {
        println!("{}", self.0);
    }
}

let mut overwritten = PrintOnDrop("drops when overwritten");
overwritten = PrintOnDrop("drops when scope ends");

let tuple = (PrintOnDrop("Tuple first"), PrintOnDrop("Tuple second"));

let moved;
// No destructor run on assignment.
moved = PrintOnDrop("Drops when moved");
// Drops now, but is then uninitialized.
moved;

// Uninitialized does not drop.
let uninitialized: PrintOnDrop;

// After a partial move, only the remaining fields are dropped.
let mut partial_move = (PrintOnDrop("first"), PrintOnDrop("forgotten"));
// Perform a partial move, leaving only `partial_move.0` initialized.
core::mem::forget(partial_move.1);
// When partial_move's scope ends, only the first field is dropped.
}

Drop scopes

Each variable or temporary is associated to a drop scope. When control flow leaves a drop scope all variables associated to that scope are dropped in reverse order of declaration (for variables) or creation (for temporaries).

Drop scopes are determined after replacing for, if let, and while let expressions with the equivalent expressions using match.

Overloaded operators are not distinguished from built-in operators and binding modes are not considered.

Given a function, or closure, there are drop scopes for:

  • The entire function
  • Each block, including the function body
    • In the case of a block expression, the scope for the block and the expression are the same scope.
  • Each arm of a match expression

Drop scopes are nested within one another as follows. When multiple scopes are left at once, such as when returning from a function, variables are dropped from the inside outwards.

  • The entire function scope is the outer most scope.
  • The function body block is contained within the scope of the entire function.
  • The parent of the expression in an expression statement is the scope of the statement.
  • The parent of the initializer of a let statement is the let statement’s scope.
  • The parent of a statement scope is the scope of the block that contains the statement.
  • The parent of the expression for a match guard is the scope of the arm that the guard is for.
  • The parent of the expression after the => in a match expression is the scope of the arm that it’s in.
  • The parent of the arm scope is the scope of the match expression that it belongs to.
  • The parent of all other scopes is the scope of the immediately enclosing expression.

Scopes of function parameters

All function parameters are in the scope of the entire function body, so are dropped last when evaluating the function. Each actual function parameter is dropped after any bindings introduced in that parameter’s pattern.

#![allow(unused)]
fn main() {
struct PrintOnDrop(&'static str);
impl Drop for PrintOnDrop {
    fn drop(&mut self) {
        println!("drop({})", self.0);
    }
}
// Drops `y`, then the second parameter, then `x`, then the first parameter
fn patterns_in_parameters(
    (x, _): (PrintOnDrop, PrintOnDrop),
    (_, y): (PrintOnDrop, PrintOnDrop),
) {}

// drop order is 3 2 0 1
patterns_in_parameters(
    (PrintOnDrop("0"), PrintOnDrop("1")),
    (PrintOnDrop("2"), PrintOnDrop("3")),
);
}

Scopes of local variables

Local variables declared in a let statement are associated to the scope of the block that contains the let statement. Local variables declared in a match expression are associated to the arm scope of the match arm that they are declared in.

#![allow(unused)]
fn main() {
struct PrintOnDrop(&'static str);
impl Drop for PrintOnDrop {
    fn drop(&mut self) {
        println!("drop({})", self.0);
    }
}
let declared_first = PrintOnDrop("Dropped last in outer scope");
{
    let declared_in_block = PrintOnDrop("Dropped in inner scope");
}
let declared_last = PrintOnDrop("Dropped first in outer scope");
}

If multiple patterns are used in the same arm for a match expression, then an unspecified pattern will be used to determine the drop order.

Temporary scopes

The temporary scope of an expression is the scope that is used for the temporary variable that holds the result of that expression when used in a place context, unless it is promoted.

Apart from lifetime extension, the temporary scope of an expression is the smallest scope that contains the expression and is one of the following:

  • The entire function.
  • A statement.
  • The body of an if, while or loop expression.
  • The else block of an if expression.
  • The condition expression of an if or while expression, or a match guard.
  • The body expression for a match arm.
  • The second operand of a lazy boolean expression.

Notes:

Temporaries that are created in the final expression of a function body are dropped after any named variables bound in the function body. Their drop scope is the entire function, as there is no smaller enclosing temporary scope.

The scrutinee of a match expression is not a temporary scope, so temporaries in the scrutinee can be dropped after the match expression. For example, the temporary for 1 in match 1 { ref mut z => z }; lives until the end of the statement.

Some examples:

#![allow(unused)]
fn main() {
struct PrintOnDrop(&'static str);
impl Drop for PrintOnDrop {
    fn drop(&mut self) {
        println!("drop({})", self.0);
    }
}
let local_var = PrintOnDrop("local var");

// Dropped once the condition has been evaluated
if PrintOnDrop("If condition").0 == "If condition" {
    // Dropped at the end of the block
    PrintOnDrop("If body").0
} else {
    unreachable!()
};

// Dropped at the end of the statement
(PrintOnDrop("first operand").0 == ""
// Dropped at the )
|| PrintOnDrop("second operand").0 == "")
// Dropped at the end of the expression
|| PrintOnDrop("third operand").0 == "";

// Dropped at the end of the function, after local variables.
// Changing this to a statement containing a return expression would make the
// temporary be dropped before the local variables. Binding to a variable
// which is then returned would also make the temporary be dropped first.
match PrintOnDrop("Matched value in final expression") {
    // Dropped once the condition has been evaluated
    _ if PrintOnDrop("guard condition").0 == "" => (),
    _ => (),
}
}

Operands

Temporaries are also created to hold the result of operands to an expression while the other operands are evaluated. The temporaries are associated to the scope of the expression with that operand. Since the temporaries are moved from once the expression is evaluated, dropping them has no effect unless one of the operands to an expression breaks out of the expression, returns, or panics.

#![allow(unused)]
fn main() {
struct PrintOnDrop(&'static str);
impl Drop for PrintOnDrop {
    fn drop(&mut self) {
        println!("drop({})", self.0);
    }
}
loop {
    // Tuple expression doesn't finish evaluating so operands drop in reverse order
    (
        PrintOnDrop("Outer tuple first"),
        PrintOnDrop("Outer tuple second"),
        (
            PrintOnDrop("Inner tuple first"),
            PrintOnDrop("Inner tuple second"),
            break,
        ),
        PrintOnDrop("Never created"),
    );
}
}

Constant promotion

Promotion of a value expression to a 'static slot occurs when the expression could be written in a constant and borrowed, and that borrow could be dereferenced where the expression was originally written, without changing the runtime behavior. That is, the promoted expression can be evaluated at compile-time and the resulting value does not contain interior mutability or destructors (these properties are determined based on the value where possible, e.g. &None always has the type &'static Option<_>, as it contains nothing disallowed).

Temporary lifetime extension

Note: The exact rules for temporary lifetime extension are subject to change. This is describing the current behavior only.

The temporary scopes for expressions in let statements are sometimes extended to the scope of the block containing the let statement. This is done when the usual temporary scope would be too small, based on certain syntactic rules. For example:

#![allow(unused)]
fn main() {
let x = &mut 0;
// Usually a temporary would be dropped by now, but the temporary for `0` lives
// to the end of the block.
println!("{}", x);
}

If a borrow, dereference, field, or tuple indexing expression has an extended temporary scope then so does its operand. If an indexing expression has an extended temporary scope then the indexed expression also has an extended temporary scope.

Extending based on patterns

An extending pattern is either

So ref x, V(ref x) and [ref x, y] are all extending patterns, but x, &ref x and &(ref x,) are not.

If the pattern in a let statement is an extending pattern then the temporary scope of the initializer expression is extended.

Extending based on expressions

For a let statement with an initializer, an extending expression is an expression which is one of the following:

So the borrow expressions in &mut 0, (&1, &mut 2), and Some { 0: &mut 3 } are all extending expressions. The borrows in &0 + &1 and Some(&mut 0) are not: the latter is syntactically a function call expression.

The operand of any extending borrow expression has its temporary scope extended.

Examples

Here are some examples where expressions have extended temporary scopes:

#![allow(unused)]
fn main() {
fn temp() {}
trait Use { fn use_temp(&self) -> &Self { self } }
impl Use for () {}
// The temporary that stores the result of `temp()` lives in the same scope
// as x in these cases.
let x = &temp();
let x = &temp() as &dyn Send;
let x = (&*&temp(),);
let x = { [Some { 0: &temp(), }] };
let ref x = temp();
let ref x = *&temp();
x;
}

Here are some examples where expressions don’t have extended temporary scopes:

#![allow(unused)]
fn main() {
fn temp() {}
trait Use { fn use_temp(&self) -> &Self { self } }
impl Use for () {}
// The temporary that stores the result of `temp()` only lives until the
// end of the let statement in these cases.

let x = Some(&temp());         // ERROR
let x = (&temp()).use_temp();  // ERROR
x;
}

Not running destructors

std::mem::forget can be used to prevent the destructor of a variable from being run, and std::mem::ManuallyDrop provides a wrapper to prevent a variable or field from being dropped automatically.

Note: Preventing a destructor from being run via std::mem::forget or other means is safe even if it has a type that isn’t 'static. Besides the places where destructors are guaranteed to run as defined by this document, types may not safely rely on a destructor being run for soundness.

Lifetime elision

Rust has rules that allow lifetimes to be elided in various places where the compiler can infer a sensible default choice.

Lifetime elision in functions

In order to make common patterns more ergonomic, lifetime arguments can be elided in function item, function pointer, and closure trait signatures. The following rules are used to infer lifetime parameters for elided lifetimes. It is an error to elide lifetime parameters that cannot be inferred. The placeholder lifetime, '_, can also be used to have a lifetime inferred in the same way. For lifetimes in paths, using '_ is preferred. Trait object lifetimes follow different rules discussed below.

  • Each elided lifetime in the parameters becomes a distinct lifetime parameter.
  • If there is exactly one lifetime used in the parameters (elided or not), that lifetime is assigned to all elided output lifetimes.

In method signatures there is another rule

  • If the receiver has type &Self or &mut Self, then the lifetime of that reference to Self is assigned to all elided output lifetime parameters.

Examples:

#![allow(unused)]
fn main() {
trait T {}
trait ToCStr {}
struct Thing<'a> {f: &'a i32}
struct Command;

trait Example {
fn print1(s: &str);                                   // elided
fn print2(s: &'_ str);                                // also elided
fn print3<'a>(s: &'a str);                            // expanded

fn debug1(lvl: usize, s: &str);                       // elided
fn debug2<'a>(lvl: usize, s: &'a str);                // expanded

fn substr1(s: &str, until: usize) -> &str;            // elided
fn substr2<'a>(s: &'a str, until: usize) -> &'a str;  // expanded

fn get_mut1(&mut self) -> &mut dyn T;                 // elided
fn get_mut2<'a>(&'a mut self) -> &'a mut dyn T;       // expanded

fn args1<T: ToCStr>(&mut self, args: &[T]) -> &mut Command;                  // elided
fn args2<'a, 'b, T: ToCStr>(&'a mut self, args: &'b [T]) -> &'a mut Command; // expanded

fn new1(buf: &mut [u8]) -> Thing<'_>;                 // elided - preferred
fn new2(buf: &mut [u8]) -> Thing;                     // elided
fn new3<'a>(buf: &'a mut [u8]) -> Thing<'a>;          // expanded
}

type FunPtr1 = fn(&str) -> &str;                      // elided
type FunPtr2 = for<'a> fn(&'a str) -> &'a str;        // expanded

type FunTrait1 = dyn Fn(&str) -> &str;                // elided
type FunTrait2 = dyn for<'a> Fn(&'a str) -> &'a str;  // expanded
}
#![allow(unused)]
fn main() {
// The following examples show situations where it is not allowed to elide the
// lifetime parameter.

trait Example {
// Cannot infer, because there are no parameters to infer from.
fn get_str() -> &str;                                 // ILLEGAL

// Cannot infer, ambiguous if it is borrowed from the first or second parameter.
fn frob(s: &str, t: &str) -> &str;                    // ILLEGAL
}
}

Default trait object lifetimes

The assumed lifetime of references held by a trait object is called its default object lifetime bound. These were defined in RFC 599 and amended in RFC 1156.

These default object lifetime bounds are used instead of the lifetime parameter elision rules defined above when the lifetime bound is omitted entirely. If '_ is used as the lifetime bound then the bound follows the usual elision rules.

If the trait object is used as a type argument of a generic type then the containing type is first used to try to infer a bound.

  • If there is a unique bound from the containing type then that is the default
  • If there is more than one bound from the containing type then an explicit bound must be specified

If neither of those rules apply, then the bounds on the trait are used:

  • If the trait is defined with a single lifetime bound then that bound is used.
  • If 'static is used for any lifetime bound then 'static is used.
  • If the trait has no lifetime bounds, then the lifetime is inferred in expressions and is 'static outside of expressions.
#![allow(unused)]
fn main() {
// For the following trait...
trait Foo { }

// These two are the same because Box<T> has no lifetime bound on T
type T1 = Box<dyn Foo>;
type T2 = Box<dyn Foo + 'static>;

// ...and so are these:
impl dyn Foo {}
impl dyn Foo + 'static {}

// ...so are these, because &'a T requires T: 'a
type T3<'a> = &'a dyn Foo;
type T4<'a> = &'a (dyn Foo + 'a);

// std::cell::Ref<'a, T> also requires T: 'a, so these are the same
type T5<'a> = std::cell::Ref<'a, dyn Foo>;
type T6<'a> = std::cell::Ref<'a, dyn Foo + 'a>;
}
#![allow(unused)]
fn main() {
// This is an example of an error.
trait Foo { }
struct TwoBounds<'a, 'b, T: ?Sized + 'a + 'b> {
    f1: &'a i32,
    f2: &'b i32,
    f3: T,
}
type T7<'a, 'b> = TwoBounds<'a, 'b, dyn Foo>;
//                                  ^^^^^^^
// Error: the lifetime bound for this object type cannot be deduced from context
}

Note that the innermost object sets the bound, so &'a Box<dyn Foo> is still &'a Box<dyn Foo + 'static>.

#![allow(unused)]
fn main() {
// For the following trait...
trait Bar<'a>: 'a { }

// ...these two are the same:
type T1<'a> = Box<dyn Bar<'a>>;
type T2<'a> = Box<dyn Bar<'a> + 'a>;

// ...and so are these:
impl<'a> dyn Bar<'a> {}
impl<'a> dyn Bar<'a> + 'a {}
}

'static lifetime elision

Both constant and static declarations of reference types have implicit 'static lifetimes unless an explicit lifetime is specified. As such, the constant declarations involving 'static above may be written without the lifetimes.

#![allow(unused)]
fn main() {
// STRING: &'static str
const STRING: &str = "bitstring";

struct BitsNStrings<'a> {
    mybits: [u32; 2],
    mystring: &'a str,
}

// BITS_N_STRINGS: BitsNStrings<'static>
const BITS_N_STRINGS: BitsNStrings<'_> = BitsNStrings {
    mybits: [1, 2],
    mystring: STRING,
};
}

Note that if the static or const items include function or closure references, which themselves include references, the compiler will first try the standard elision rules. If it is unable to resolve the lifetimes by its usual rules, then it will error. By way of example:

#![allow(unused)]
fn main() {
struct Foo;
struct Bar;
struct Baz;
fn somefunc(a: &Foo, b: &Bar, c: &Baz) -> usize {42}
// Resolved as `for<'a> fn(&'a str) -> &'a str`.
const RESOLVED_SINGLE: fn(&str) -> &str = |x| x;

// Resolved as `for<'a, 'b, 'c> Fn(&'a Foo, &'b Bar, &'c Baz) -> usize`.
const RESOLVED_MULTIPLE: &dyn Fn(&Foo, &Bar, &Baz) -> usize = &somefunc;
}
#![allow(unused)]
fn main() {
struct Foo;
struct Bar;
struct Baz;
fn somefunc<'a,'b>(a: &'a Foo, b: &'b Bar) -> &'a Baz {unimplemented!()}
// There is insufficient information to bound the return reference lifetime
// relative to the argument lifetimes, so this is an error.
const RESOLVED_STATIC: &dyn Fn(&Foo, &Bar) -> &Baz = &somefunc;
//                                            ^
// this function's return type contains a borrowed value, but the signature
// does not say whether it is borrowed from argument 1 or argument 2
}

Special types and traits

Certain types and traits that exist in the standard library are known to the Rust compiler. This chapter documents the special features of these types and traits.

Box<T>

Box<T> has a few special features that Rust doesn’t currently allow for user defined types.

  • The dereference operator for Box<T> produces a place which can be moved from. This means that the * operator and the destructor of Box<T> are built-in to the language.
  • Methods can take Box<Self> as a receiver.
  • A trait may be implemented for Box<T> in the same crate as T, which the orphan rules prevent for other generic types.

Rc<T>

Methods can take Rc<Self> as a receiver.

Arc<T>

Methods can take Arc<Self> as a receiver.

Pin<P>

Methods can take Pin<P> as a receiver.

UnsafeCell<T>

std::cell::UnsafeCell<T> is used for interior mutability. It ensures that the compiler doesn’t perform optimisations that are incorrect for such types. It also ensures that static items which have a type with interior mutability aren’t placed in memory marked as read only.

PhantomData<T>

std::marker::PhantomData<T> is a zero-sized, minimum alignment, type that is considered to own a T for the purposes of variance, drop check, and auto traits.

Operator Traits

The traits in std::ops and std::cmp are used to overload operators, indexing expressions, and call expressions.

Deref and DerefMut

As well as overloading the unary * operator, Deref and DerefMut are also used in method resolution and deref coercions.

Drop

The Drop trait provides a destructor, to be run whenever a value of this type is to be destroyed.

Copy

The Copy trait changes the semantics of a type implementing it. Values whose type implements Copy are copied rather than moved upon assignment.

Copy can only be implemented for types which do not implement Drop, and whose fields are all Copy. For enums, this means all fields of all variants have to be Copy. For unions, this means all variants have to be Copy.

Copy is implemented by the compiler for

Clone

The Clone trait is a supertrait of Copy, so it also needs compiler generated implementations. It is implemented by the compiler for the following types:

  • Types with a built-in Copy implementation (see above)
  • Tuples of Clone types
  • Closures that only capture values of Clone types or capture no values from the environment

Send

The Send trait indicates that a value of this type is safe to send from one thread to another.

Sync

The Sync trait indicates that a value of this type is safe to share between multiple threads. This trait must be implemented for all types used in immutable static items.

Termination

The Termination trait indicates the acceptable return types for the main function and test functions.

Auto traits

The Send, Sync, Unpin, UnwindSafe, and RefUnwindSafe traits are auto traits. Auto traits have special properties.

If no explicit implementation or negative implementation is written out for an auto trait for a given type, then the compiler implements it automatically according to the following rules:

  • &T, &mut T, *const T, *mut T, [T; n], and [T] implement the trait if T does.
  • Function item types and function pointers automatically implement the trait.
  • Structs, enums, unions, and tuples implement the trait if all of their fields do.
  • Closures implement the trait if the types of all of their captures do. A closure that captures a T by shared reference and a U by value implements any auto traits that both &T and U do.

For generic types (counting the built-in types above as generic over T), if a generic implementation is available, then the compiler does not automatically implement it for types that could use the implementation except that they do not meet the requisite trait bounds. For instance, the standard library implements Send for all &T where T is Sync; this means that the compiler will not implement Send for &T if T is Send but not Sync.

Auto traits can also have negative implementations, shown as impl !AutoTrait for T in the standard library documentation, that override the automatic implementations. For example *mut T has a negative implementation of Send, and so *mut T is not Send, even if T is. There is currently no stable way to specify additional negative implementations; they exist only in the standard library.

Auto traits may be added as an additional bound to any trait object, even though normally only one trait is allowed. For instance, Box<dyn Debug + Send + UnwindSafe> is a valid type.

Sized

The Sized trait indicates that the size of this type is known at compile-time; that is, it’s not a dynamically sized type. Type parameters (except Self in traits) are Sized by default, as are associated types. Sized is always implemented automatically by the compiler, not by implementation items. These implicit Sized bounds may be relaxed by using the special ?Sized bound.

Names

An entity is a language construct that can be referred to in some way within the source program, usually via a path. Entities include types, items, generic parameters, variable bindings, loop labels, lifetimes, fields, attributes, and lints.

A declaration is a syntactical construct that can introduce a name to refer to an entity. Entity names are valid within a scope — a region of source text where that name may be referenced.

Some entities are explicitly declared in the source code, and some are implicitly declared as part of the language or compiler extensions.

Paths are used to refer to an entity, possibly in another module or type. Lifetimes and loop labels use a dedicated syntax using a leading quote.

Names are segregated into different namespaces, allowing entities in different namespaces to share the same name without conflict.

Name resolution is the compile-time process of tying paths, identifiers, and labels to entity declarations.

Access to certain names may be restricted based on their visibility.

Explicitly declared entities

Entities that explicitly introduce a name in the source code are:

Additionally, macro invocations and attributes can introduce names by expanding to one of the above items.

Implicitly declared entities

The following entities are implicitly defined by the language, or are introduced by compiler options and extensions:

Additionally, the crate root module does not have a name, but can be referred to with certain path qualifiers or aliases.

Namespaces

A namespace is a logical grouping of declared names. Names are segregated into separate namespaces based on the kind of entity the name refers to. Namespaces allow the occurrence of a name in one namespace to not conflict with the same name in another namespace.

There are several different namespaces that each contain different kinds of entities. The usage of a name will look for the declaration of that name in different namespaces, based on the context, as described in the name resolution chapter.

The following is a list of namespaces, with their corresponding entities:

An example of how overlapping names in different namespaces can be used unambiguously:

#![allow(unused)]
fn main() {
// Foo introduces a type in the type namespace and a constructor in the value
// namespace.
struct Foo(u32);

// The `Foo` macro is declared in the macro namespace.
macro_rules! Foo {
    () => {};
}

// `Foo` in the `f` parameter type refers to `Foo` in the type namespace.
// `'Foo` introduces a new lifetime in the lifetime namespace.
fn example<'Foo>(f: Foo) {
    // `Foo` refers to the `Foo` constructor in the value namespace.
    let ctor = Foo;
    // `Foo` refers to the `Foo` macro in the macro namespace.
    Foo!{}
    // `'Foo` introduces a label in the label namespace.
    'Foo: loop {
        // `'Foo` refers to the `'Foo` lifetime parameter, and `Foo`
        // refers to the type namespace.
        let x: &'Foo Foo;
        // `'Foo` refers to the label.
        break 'Foo;
    }
}
}

Named entities without a namespace

The following entities have explicit names, but the names are not a part of any specific namespace.

Fields

Even though struct, enum, and union fields are named, the named fields do not live in an explicit namespace. They can only be accessed via a field expression, which only inspects the field names of the specific type being accessed.

Use declarations

A use declaration has named aliases that it imports into scope, but the use item itself does not belong to a specific namespace. Instead, it can introduce aliases into multiple namespaces, depending on the item kind being imported.

Sub-namespaces

The macro namespace is split into two sub-namespaces: one for bang-style macros and one for attributes. When an attribute is resolved, any bang-style macros in scope will be ignored. And conversely resolving a bang-style macro will ignore attribute macros in scope. This prevents one style from shadowing another.

For example, the cfg attribute and the cfg macro are two different entities with the same name in the macro namespace, but they can still be used in their respective context.

It is still an error for a use import to shadow another macro, regardless of their sub-namespaces.

Scopes

A scope is the region of source text where a named entity may be referenced with that name. The following sections provide details on the scoping rules and behavior, which depend on the kind of entity and where it is declared. The process of how names are resolved to entities is described in the name resolution chapter. More information on “drop scopes” used for the purpose of running destructors may be found in the destructors chapter.

Item scopes

The name of an item declared directly in a module has a scope that extends from the start of the module to the end of the module. These items are also members of the module and can be referred to with a path leading from their module.

The name of an item declared as a statement has a scope that extends from the start of the block the item statement is in until the end of the block.

It is an error to introduce an item with a duplicate name of another item in the same namespace within the same module or block. Asterisk glob imports have special behavior for dealing with duplicate names and shadowing, see the linked chapter for more details. Items in a module may shadow items in a prelude.

Item names from outer modules are not in scope within a nested module. A path may be used to refer to an item in another module.

Associated item scopes

Associated items are not scoped and can only be referred to by using a path leading from the type or trait they are associated with. Methods can also be referred to via call expressions.

Similar to items within a module or block, it is an error to introduce an item within a trait or implementation that is a duplicate of another item in the trait or impl in the same namespace.

Pattern binding scopes

The scope of a local variable pattern binding depends on where it is used:

Local variable scopes do not extend into item declarations.

Pattern binding shadowing

Pattern bindings are allowed to shadow any name in scope with the following exceptions which are an error:

The following example illustrates how local bindings can shadow item declarations:

#![allow(unused)]
fn main() {
fn shadow_example() {
    // Since there are no local variables in scope yet, this resolves to the function.
    foo(); // prints `function`
    let foo = || println!("closure");
    fn foo() { println!("function"); }
    // This resolves to the local closure since it shadows the item.
    foo(); // prints `closure`
}
}

Generic parameter scopes

Generic parameters are declared in a GenericParams list. The scope of a generic parameter is within the item it is declared on.

All parameters are in scope within the generic parameter list regardless of the order they are declared. The following shows some examples where a parameter may be referenced before it is declared:

#![allow(unused)]
fn main() {
// The 'b bound is referenced before it is declared.
fn params_scope<'a: 'b, 'b>() {}

trait SomeTrait<const Z: usize> {}
// The const N is referenced in the trait bound before it is declared.
fn f<T: SomeTrait<N>, const N: usize>() {}
}

Generic parameters are also in scope for type bounds and where clauses, for example:

#![allow(unused)]
fn main() {
trait SomeTrait<'a, T> {}
// The <'a, U> for `SomeTrait` refer to the 'a and U parameters of `bounds_scope`.
fn bounds_scope<'a, T: SomeTrait<'a, U>, U>() {}

fn where_scope<'a, T, U>()
    where T: SomeTrait<'a, U>
{}
}

It is an error for items declared inside a function to refer to a generic parameter from their outer scope.

#![allow(unused)]
fn main() {
fn example<T>() {
    fn inner(x: T) {} // ERROR: can't use generic parameters from outer function
}
}

Generic parameter shadowing

It is an error to shadow a generic parameter with the exception that items declared within functions are allowed to shadow generic parameter names from the function.

#![allow(unused)]
fn main() {
fn example<'a, T, const N: usize>() {
    // Items within functions are allowed to shadow generic parameter in scope.
    fn inner_lifetime<'a>() {} // OK
    fn inner_type<T>() {} // OK
    fn inner_const<const N: usize>() {} // OK
}
}
#![allow(unused)]
fn main() {
trait SomeTrait<'a, T, const N: usize> {
    fn example_lifetime<'a>() {} // ERROR: 'a is already in use
    fn example_type<T>() {} // ERROR: T is already in use
    fn example_const<const N: usize>() {} // ERROR: N is already in use
    fn example_mixed<const T: usize>() {} // ERROR: T is already in use
}
}

Lifetime scopes

Lifetime parameters are declared in a GenericParams list and higher-ranked trait bounds.

The 'static lifetime and placeholder lifetime '_ have a special meaning and cannot be declared as a parameter.

Lifetime generic parameter scopes

Constant and static items and const contexts only ever allow 'static lifetime references, so no other lifetime may be in scope within them. Associated consts do allow referring to lifetimes declared in their trait or implementation.

Higher-ranked trait bound scopes

The scope of a lifetime parameter declared as a higher-ranked trait bound depends on the scenario where it is used.

  • As a TypeBoundWhereClauseItem the declared lifetimes are in scope in the type and the type bounds.
  • As a TraitBound the declared lifetimes are in scope within the bound type path.
  • As a BareFunctionType the declared lifetimes are in scope within the function parameters and return type.
#![allow(unused)]
fn main() {
trait Trait<'a>{}

fn where_clause<T>()
    // 'a is in scope in both the type and the type bounds.
    where for <'a> &'a T: Trait<'a>
{}

fn bound<T>()
    // 'a is in scope within the bound.
    where T: for <'a> Trait<'a>
{}

struct Example<'a> {
    field: &'a u32
}

// 'a is in scope in both the parameters and return type.
type FnExample = for<'a> fn(x: Example<'a>) -> Example<'a>;
}

Impl trait restrictions

Impl trait types can only reference lifetimes declared on a function or implementation.

#![allow(unused)]
fn main() {
trait Trait1 {
    type Item;
}
trait Trait2<'a> {}

struct Example;

impl Trait1 for Example {
    type Item = Element;
}

struct Element;
impl<'a> Trait2<'a> for Element {}

// The `impl Trait2` here is not allowed to refer to 'b but it is allowed to
// refer to 'a.
fn foo<'a>() -> impl for<'b> Trait1<Item = impl Trait2<'a>> {
    // ...
   Example
}
}

Loop label scopes

Loop labels may be declared by a loop expression. The scope of a loop label is from the point it is declared till the end of the loop expression. The scope does not extend into items, closures, async blocks, const arguments, const contexts, and the iterator expression of the defining for loop.

#![allow(unused)]
fn main() {
'a: for n in 0..3 {
    if n % 2 == 0 {
        break 'a;
    }
    fn inner() {
        // Using 'a here would be an error.
        // break 'a;
    }
}

// The label is in scope for the expression of `while` loops.
'a: while break 'a {}         // Loop does not run.
'a: while let _ = break 'a {} // Loop does not run.

// The label is not in scope in the defining `for` loop:
'a: for outer in 0..5 {
    // This will break the outer loop, skipping the inner loop and stopping
    // the outer loop.
    'a: for inner in { break 'a; 0..1 } {
        println!("{}", inner); // This does not run.
    }
    println!("{}", outer); // This does not run, either.
}

}

Loop labels may shadow labels of the same name in outer scopes. References to a label refer to the closest definition.

#![allow(unused)]
fn main() {
// Loop label shadowing example.
'a: for outer in 0..5 {
    'a: for inner in 0..5 {
        // This terminates the inner loop, but the outer loop continues to run.
        break 'a;
    }
}
}

Prelude scopes

Preludes bring entities into scope of every module. The entities are not members of the module, but are implicitly queried during name resolution. The prelude names may be shadowed by declarations in a module.

The preludes are layered such that one shadows another if they contain entities of the same name. The order that preludes may shadow other preludes is the following where earlier entries may shadow later ones:

  1. Extern prelude
  2. Tool prelude
  3. macro_use prelude
  4. Standard library prelude
  5. Language prelude

macro_rules scopes

The scope of macro_rules macros is described in the Macros By Example chapter. The behavior depends on the use of the macro_use and macro_export attributes.

Derive macro helper attributes

Derive macro helper attributes are in scope in the item where their corresponding derive attribute is specified. The scope extends from just after the derive attribute to the end of the item. Helper attributes shadow other attributes of the same name in scope.

Self scope

Although Self is a keyword with special meaning, it interacts with name resolution in a way similar to normal names.

The implicit Self type in the definition of a struct, enum, union, trait, or implementation is treated similarly to a generic parameter, and is in scope in the same way as a generic type parameter.

The implicit Self constructor in the value namespace of an implementation is in scope within the body of the implementation (the implementation’s associated items).

#![allow(unused)]
fn main() {
// Self type within struct definition.
struct Recursive {
    f1: Option<Box<Self>>
}

// Self type within generic parameters.
struct SelfGeneric<T: Into<Self>>(T);

// Self value constructor within an implementation.
struct ImplExample();
impl ImplExample {
    fn example() -> Self { // Self type
        Self() // Self value constructor
    }
}
}

Preludes

A prelude is a collection of names that are automatically brought into scope of every module in a crate.

These prelude names are not part of the module itself: they are implicitly queried during name resolution. For example, even though something like Box is in scope in every module, you cannot refer to it as self::Box because it is not a member of the current module.

There are several different preludes:

Standard library prelude

Each crate has a standard library prelude, which consists of the names from a single standard library module. The module used depends on the crate’s edition, and on whether the no_std attribute is applied to the crate:

Note:

std::prelude::rust_2015 and std::prelude::rust_2018 have the same contents as std::prelude::v1.

core::prelude::rust_2015 and core::prelude::rust_2018 have the same contents as core::prelude::v1.

Extern prelude

External crates imported with extern crate in the root module or provided to the compiler (as with the --extern flag with rustc) are added to the extern prelude. If imported with an alias such as extern crate orig_name as new_name, then the symbol new_name is instead added to the prelude.

The core crate is always added to the extern prelude. The std crate is added as long as the no_std attribute is not specified in the crate root.

Edition differences: In the 2015 edition, crates in the extern prelude cannot be referenced via use declarations, so it is generally standard practice to include extern crate declarations to bring them into scope.

Beginning in the 2018 edition, use declarations can reference crates in the extern prelude, so it is considered unidiomatic to use extern crate.

Note: Additional crates that ship with rustc, such as alloc, and test, are not automatically included with the --extern flag when using Cargo. They must be brought into scope with an extern crate declaration, even in the 2018 edition.

#![allow(unused)]
fn main() {
extern crate alloc;
use alloc::rc::Rc;
}

Cargo does bring in proc_macro to the extern prelude for proc-macro crates only.

The no_std attribute

By default, the standard library is automatically included in the crate root module. The std crate is added to the root, along with an implicit macro_use attribute pulling in all macros exported from std into the macro_use prelude. Both core and std are added to the extern prelude.

The no_std attribute may be applied at the crate level to prevent the std crate from being automatically added into scope. It does three things:

Note: Using the core prelude over the standard prelude is useful when either the crate is targeting a platform that does not support the standard library or is purposefully not using the capabilities of the standard library. Those capabilities are mainly dynamic memory allocation (e.g. Box and Vec) and file and network capabilities (e.g. std::fs and std::io).

Warning: Using no_std does not prevent the standard library from being linked in. It is still valid to put extern crate std; into the crate and dependencies can also link it in.

Language prelude

The language prelude includes names of types and attributes that are built-in to the language. The language prelude is always in scope. It includes the following:

macro_use prelude

The macro_use prelude includes macros from external crates that were imported by the macro_use attribute applied to an extern crate.

Tool prelude

The tool prelude includes tool names for external tools in the type namespace. See the tool attributes section for more details.

The no_implicit_prelude attribute

The no_implicit_prelude attribute may be applied at the crate level or on a module to indicate that it should not automatically bring the standard library prelude, extern prelude, or tool prelude into scope for that module or any of its descendants.

This attribute does not affect the language prelude.

Edition differences: In the 2015 edition, the no_implicit_prelude attribute does not affect the macro_use prelude, and all macros exported from the standard library are still included in the macro_use prelude. Starting in the 2018 edition, it will remove the macro_use prelude.

Paths

A path is a sequence of one or more path segments separated by :: tokens. Paths are used to refer to items, values, types, macros, and attributes.

Two examples of simple paths consisting of only identifier segments:

x;
x::y::z;

Types of paths

Simple Paths

Syntax
SimplePath :
   ::? SimplePathSegment (:: SimplePathSegment)*

SimplePathSegment :
   IDENTIFIER | super | self | crate | $crate

Simple paths are used in visibility markers, attributes, macros, and use items. For example:

#![allow(unused)]
fn main() {
use std::io::{self, Write};
mod m {
    #[clippy::cyclomatic_complexity = "0"]
    pub (in super) fn f1() {}
}
}

Paths in expressions

Syntax
PathInExpression :
   ::? PathExprSegment (:: PathExprSegment)*

PathExprSegment :
   PathIdentSegment (:: GenericArgs)?

PathIdentSegment :
   IDENTIFIER | super | self | Self | crate | $crate

GenericArgs :
      < >
   | < ( GenericArg , )* GenericArg ,? >

GenericArg :
   Lifetime | Type | GenericArgsConst | GenericArgsBinding | GenericArgsBounds

GenericArgsConst :
      BlockExpression
   | LiteralExpression
   | - LiteralExpression
   | SimplePathSegment

GenericArgsBinding :
   IDENTIFIER GenericArgs? = Type

GenericArgsBounds :
   IDENTIFIER GenericArgs? : TypeParamBounds

Paths in expressions allow for paths with generic arguments to be specified. They are used in various places in expressions and patterns.

The :: token is required before the opening < for generic arguments to avoid ambiguity with the less-than operator. This is colloquially known as “turbofish” syntax.

#![allow(unused)]
fn main() {
(0..10).collect::<Vec<_>>();
Vec::<u8>::with_capacity(1024);
}

The order of generic arguments is restricted to lifetime arguments, then type arguments, then const arguments, then equality constraints.

Const arguments must be surrounded by braces unless they are a literal or a single segment path.

The synthetic type parameters corresponding to impl Trait types are implicit, and these cannot be explicitly specified.

Qualified paths

Syntax
QualifiedPathInExpression :
   QualifiedPathType (:: PathExprSegment)+

QualifiedPathType :
   < Type (as TypePath)? >

QualifiedPathInType :
   QualifiedPathType (:: TypePathSegment)+

Fully qualified paths allow for disambiguating the path for trait implementations and for specifying canonical paths. When used in a type specification, it supports using the type syntax specified below.

#![allow(unused)]
fn main() {
struct S;
impl S {
    fn f() { println!("S"); }
}
trait T1 {
    fn f() { println!("T1 f"); }
}
impl T1 for S {}
trait T2 {
    fn f() { println!("T2 f"); }
}
impl T2 for S {}
S::f();  // Calls the inherent impl.
<S as T1>::f();  // Calls the T1 trait function.
<S as T2>::f();  // Calls the T2 trait function.
}

Paths in types

Syntax
TypePath :
   ::? TypePathSegment (:: TypePathSegment)*

TypePathSegment :
   PathIdentSegment (::? (GenericArgs | TypePathFn))?

TypePathFn :
( TypePathFnInputs? ) (-> TypeNoBounds)?

TypePathFnInputs :
Type (, Type)* ,?

Type paths are used within type definitions, trait bounds, type parameter bounds, and qualified paths.

Although the :: token is allowed before the generics arguments, it is not required because there is no ambiguity like there is in PathInExpression.

#![allow(unused)]
fn main() {
mod ops {
    pub struct Range<T> {f1: T}
    pub trait Index<T> {}
    pub struct Example<'a> {f1: &'a i32}
}
struct S;
impl ops::Index<ops::Range<usize>> for S { /*...*/ }
fn i<'a>() -> impl Iterator<Item = ops::Example<'a>> {
    // ...
   const EXAMPLE: Vec<ops::Example<'static>> = Vec::new();
   EXAMPLE.into_iter()
}
type G = std::boxed::Box<dyn std::ops::FnOnce(isize) -> isize>;
}

Path qualifiers

Paths can be denoted with various leading qualifiers to change the meaning of how it is resolved.

::

Paths starting with :: are considered to be global paths where the segments of the path start being resolved from a place which differs based on edition. Each identifier in the path must resolve to an item.

Edition differences: In the 2015 Edition, identifiers resolve from the “crate root” (crate:: in the 2018 edition), which contains a variety of different items, including external crates, default crates such as std or core, and items in the top level of the crate (including use imports).

Beginning with the 2018 Edition, paths starting with :: resolve from crates in the extern prelude. That is, they must be followed by the name of a crate.

#![allow(unused)]
fn main() {
pub fn foo() {
    // In the 2018 edition, this accesses `std` via the extern prelude.
    // In the 2015 edition, this accesses `std` via the crate root.
    let now = ::std::time::Instant::now();
    println!("{:?}", now);
}
}
// 2015 Edition
mod a {
    pub fn foo() {}
}
mod b {
    pub fn foo() {
        ::a::foo(); // call `a`'s foo function
        // In Rust 2018, `::a` would be interpreted as the crate `a`.
    }
}
fn main() {}

self

self resolves the path relative to the current module. self can only be used as the first segment, without a preceding ::.

In a method body, a path which consists of a single self segment resolves to the method’s self parameter.

fn foo() {}
fn bar() {
    self::foo();
}
struct S(bool);
impl S {
  fn baz(self) {
        self.0;
    }
}
fn main() {}

Self

Self, with a capital “S”, is used to refer to the current type being implemented or defined. It may be used in the following situations:

  • In a trait definition, it refers to the type implementing the trait.
  • In an implementation, it refers to the type being implemented. When implementing a tuple or unit struct, it also refers to the constructor in the value namespace.
  • In the definition of a struct, enumeration, or union, it refers to the type being defined. The definition is not allowed to be infinitely recursive (there must be an indirection).

The scope of Self behaves similarly to a generic parameter; see the Self scope section for more details.

Self can only be used as the first segment, without a preceding ::. The Self path cannot include generic arguments (as in Self::<i32>).

#![allow(unused)]
fn main() {
trait T {
    type Item;
    const C: i32;
    // `Self` will be whatever type that implements `T`.
    fn new() -> Self;
    // `Self::Item` will be the type alias in the implementation.
    fn f(&self) -> Self::Item;
}
struct S;
impl T for S {
    type Item = i32;
    const C: i32 = 9;
    fn new() -> Self {           // `Self` is the type `S`.
        S
    }
    fn f(&self) -> Self::Item {  // `Self::Item` is the type `i32`.
        Self::C                  // `Self::C` is the constant value `9`.
    }
}

// `Self` is in scope within the generics of a trait definition,
// to refer to the type being defined.
trait Add<Rhs = Self> {
    type Output;
    // `Self` can also reference associated items of the
    // type being implemented.
    fn add(self, rhs: Rhs) -> Self::Output;
}

struct NonEmptyList<T> {
    head: T,
    // A struct can reference itself (as long as it is not
    // infinitely recursive).
    tail: Option<Box<Self>>,
}
}

super

super in a path resolves to the parent module. It may only be used in leading segments of the path, possibly after an initial self segment.

mod a {
    pub fn foo() {}
}
mod b {
    pub fn foo() {
        super::a::foo(); // call a's foo function
    }
}
fn main() {}

super may be repeated several times after the first super or self to refer to ancestor modules.

mod a {
    fn foo() {}

    mod b {
        mod c {
            fn foo() {
                super::super::foo(); // call a's foo function
                self::super::super::foo(); // call a's foo function
            }
        }
    }
}
fn main() {}

crate

crate resolves the path relative to the current crate. crate can only be used as the first segment, without a preceding ::.

fn foo() {}
mod a {
    fn bar() {
        crate::foo();
    }
}
fn main() {}

$crate

$crate is only used within macro transcribers, and can only be used as the first segment, without a preceding ::. $crate will expand to a path to access items from the top level of the crate where the macro is defined, regardless of which crate the macro is invoked.

pub fn increment(x: u32) -> u32 {
    x + 1
}

#[macro_export]
macro_rules! inc {
    ($x:expr) => ( $crate::increment($x) )
}
fn main() { }

Canonical paths

Items defined in a module or implementation have a canonical path that corresponds to where within its crate it is defined. All other paths to these items are aliases. The canonical path is defined as a path prefix appended by the path segment the item itself defines.

Implementations and use declarations do not have canonical paths, although the items that implementations define do have them. Items defined in block expressions do not have canonical paths. Items defined in a module that does not have a canonical path do not have a canonical path. Associated items defined in an implementation that refers to an item without a canonical path, e.g. as the implementing type, the trait being implemented, a type parameter or bound on a type parameter, do not have canonical paths.

The path prefix for modules is the canonical path to that module. For bare implementations, it is the canonical path of the item being implemented surrounded by angle (<>) brackets. For trait implementations, it is the canonical path of the item being implemented followed by as followed by the canonical path to the trait all surrounded in angle (<>) brackets.

The canonical path is only meaningful within a given crate. There is no global namespace across crates; an item’s canonical path merely identifies it within the crate.

// Comments show the canonical path of the item.

mod a { // crate::a
    pub struct Struct; // crate::a::Struct

    pub trait Trait { // crate::a::Trait
        fn f(&self); // crate::a::Trait::f
    }

    impl Trait for Struct {
        fn f(&self) {} // <crate::a::Struct as crate::a::Trait>::f
    }

    impl Struct {
        fn g(&self) {} // <crate::a::Struct>::g
    }
}

mod without { // crate::without
    fn canonicals() { // crate::without::canonicals
        struct OtherStruct; // None

        trait OtherTrait { // None
            fn g(&self); // None
        }

        impl OtherTrait for OtherStruct {
            fn g(&self) {} // None
        }

        impl OtherTrait for crate::a::Struct {
            fn g(&self) {} // None
        }

        impl crate::a::Trait for OtherStruct {
            fn f(&self) {} // None
        }
    }
}

fn main() {}

Name resolution

Note: This is a placeholder for future expansion.

Visibility and Privacy

Syntax
Visibility :
      pub
   | pub ( crate )
   | pub ( self )
   | pub ( super )
   | pub ( in SimplePath )

These two terms are often used interchangeably, and what they are attempting to convey is the answer to the question “Can this item be used at this location?”

Rust’s name resolution operates on a global hierarchy of namespaces. Each level in the hierarchy can be thought of as some item. The items are one of those mentioned above, but also include external crates. Declaring or defining a new module can be thought of as inserting a new tree into the hierarchy at the location of the definition.

To control whether interfaces can be used across modules, Rust checks each use of an item to see whether it should be allowed or not. This is where privacy warnings are generated, or otherwise “you used a private item of another module and weren’t allowed to.”

By default, everything is private, with two exceptions: Associated items in a pub Trait are public by default; Enum variants in a pub enum are also public by default. When an item is declared as pub, it can be thought of as being accessible to the outside world. For example:

fn main() {}
// Declare a private struct
struct Foo;

// Declare a public struct with a private field
pub struct Bar {
    field: i32,
}

// Declare a public enum with two public variants
pub enum State {
    PubliclyAccessibleState,
    PubliclyAccessibleState2,
}

With the notion of an item being either public or private, Rust allows item accesses in two cases:

  1. If an item is public, then it can be accessed externally from some module m if you can access all the item’s ancestor modules from m. You can also potentially be able to name the item through re-exports. See below.
  2. If an item is private, it may be accessed by the current module and its descendants.

These two cases are surprisingly powerful for creating module hierarchies exposing public APIs while hiding internal implementation details. To help explain, here’s a few use cases and what they would entail:

  • A library developer needs to expose functionality to crates which link against their library. As a consequence of the first case, this means that anything which is usable externally must be pub from the root down to the destination item. Any private item in the chain will disallow external accesses.

  • A crate needs a global available “helper module” to itself, but it doesn’t want to expose the helper module as a public API. To accomplish this, the root of the crate’s hierarchy would have a private module which then internally has a “public API”. Because the entire crate is a descendant of the root, then the entire local crate can access this private module through the second case.

  • When writing unit tests for a module, it’s often a common idiom to have an immediate child of the module to-be-tested named mod test. This module could access any items of the parent module through the second case, meaning that internal implementation details could also be seamlessly tested from the child module.

In the second case, it mentions that a private item “can be accessed” by the current module and its descendants, but the exact meaning of accessing an item depends on what the item is. Accessing a module, for example, would mean looking inside of it (to import more items). On the other hand, accessing a function would mean that it is invoked. Additionally, path expressions and import statements are considered to access an item in the sense that the import/expression is only valid if the destination is in the current visibility scope.

Here’s an example of a program which exemplifies the three cases outlined above:

// This module is private, meaning that no external crate can access this
// module. Because it is private at the root of this current crate, however, any
// module in the crate may access any publicly visible item in this module.
mod crate_helper_module {

    // This function can be used by anything in the current crate
    pub fn crate_helper() {}

    // This function *cannot* be used by anything else in the crate. It is not
    // publicly visible outside of the `crate_helper_module`, so only this
    // current module and its descendants may access it.
    fn implementation_detail() {}
}

// This function is "public to the root" meaning that it's available to external
// crates linking against this one.
pub fn public_api() {}

// Similarly to 'public_api', this module is public so external crates may look
// inside of it.
pub mod submodule {
    use crate::crate_helper_module;

    pub fn my_method() {
        // Any item in the local crate may invoke the helper module's public
        // interface through a combination of the two rules above.
        crate_helper_module::crate_helper();
    }

    // This function is hidden to any module which is not a descendant of
    // `submodule`
    fn my_implementation() {}

    #[cfg(test)]
    mod test {

        #[test]
        fn test_my_implementation() {
            // Because this module is a descendant of `submodule`, it's allowed
            // to access private items inside of `submodule` without a privacy
            // violation.
            super::my_implementation();
        }
    }
}

fn main() {}

For a Rust program to pass the privacy checking pass, all paths must be valid accesses given the two rules above. This includes all use statements, expressions, types, etc.

pub(in path), pub(crate), pub(super), and pub(self)

In addition to public and private, Rust allows users to declare an item as visible only within a given scope. The rules for pub restrictions are as follows:

  • pub(in path) makes an item visible within the provided path. path must be a simple path which resolves to an ancestor module of the item whose visibility is being declared. Each identifier in path must refer directly to a module (not to a name introduced by a use statement).
  • pub(crate) makes an item visible within the current crate.
  • pub(super) makes an item visible to the parent module. This is equivalent to pub(in super).
  • pub(self) makes an item visible to the current module. This is equivalent to pub(in self) or not using pub at all.

Edition differences: Starting with the 2018 edition, paths for pub(in path) must start with crate, self, or super. The 2015 edition may also use paths starting with :: or modules from the crate root.

Here’s an example:

pub mod outer_mod {
    pub mod inner_mod {
        // This function is visible within `outer_mod`
        pub(in crate::outer_mod) fn outer_mod_visible_fn() {}
        // Same as above, this is only valid in the 2015 edition.
        pub(in outer_mod) fn outer_mod_visible_fn_2015() {}

        // This function is visible to the entire crate
        pub(crate) fn crate_visible_fn() {}

        // This function is visible within `outer_mod`
        pub(super) fn super_mod_visible_fn() {
            // This function is visible since we're in the same `mod`
            inner_mod_visible_fn();
        }

        // This function is visible only within `inner_mod`,
        // which is the same as leaving it private.
        pub(self) fn inner_mod_visible_fn() {}
    }
    pub fn foo() {
        inner_mod::outer_mod_visible_fn();
        inner_mod::crate_visible_fn();
        inner_mod::super_mod_visible_fn();

        // This function is no longer visible since we're outside of `inner_mod`
        // Error! `inner_mod_visible_fn` is private
        //inner_mod::inner_mod_visible_fn();
    }
}

fn bar() {
    // This function is still visible since we're in the same crate
    outer_mod::inner_mod::crate_visible_fn();

    // This function is no longer visible since we're outside of `outer_mod`
    // Error! `super_mod_visible_fn` is private
    //outer_mod::inner_mod::super_mod_visible_fn();

    // This function is no longer visible since we're outside of `outer_mod`
    // Error! `outer_mod_visible_fn` is private
    //outer_mod::inner_mod::outer_mod_visible_fn();

    outer_mod::foo();
}

fn main() { bar() }

Note: This syntax only adds another restriction to the visibility of an item. It does not guarantee that the item is visible within all parts of the specified scope. To access an item, all of its parent items up to the current scope must still be visible as well.

Re-exporting and Visibility

Rust allows publicly re-exporting items through a pub use directive. Because this is a public directive, this allows the item to be used in the current module through the rules above. It essentially allows public access into the re-exported item. For example, this program is valid:

pub use self::implementation::api;

mod implementation {
    pub mod api {
        pub fn f() {}
    }
}

fn main() {}

This means that any external crate referencing implementation::api::f would receive a privacy violation, while the path api::f would be allowed.

When re-exporting a private item, it can be thought of as allowing the “privacy chain” being short-circuited through the reexport instead of passing through the namespace hierarchy as it normally would.

Memory model

Rust does not yet have a defined memory model. Various academics and industry professionals are working on various proposals, but for now, this is an under-defined place in the language.

Memory allocation and lifetime

The items of a program are those functions, modules, and types that have their value calculated at compile-time and stored uniquely in the memory image of the rust process. Items are neither dynamically allocated nor freed.

The heap is a general term that describes boxes. The lifetime of an allocation in the heap depends on the lifetime of the box values pointing to it. Since box values may themselves be passed in and out of frames, or stored in the heap, heap allocations may outlive the frame they are allocated within. An allocation in the heap is guaranteed to reside at a single location in the heap for the whole lifetime of the allocation - it will never be relocated as a result of moving a box value.

Variables

A variable is a component of a stack frame, either a named function parameter, an anonymous temporary, or a named local variable.

A local variable (or stack-local allocation) holds a value directly, allocated within the stack’s memory. The value is a part of the stack frame.

Local variables are immutable unless declared otherwise. For example: let mut x = ....

Function parameters are immutable unless declared with mut. The mut keyword applies only to the following parameter. For example: |mut x, y| and fn f(mut x: Box<i32>, y: Box<i32>) declare one mutable variable x and one immutable variable y.

Local variables are not initialized when allocated. Instead, the entire frame worth of local variables are allocated, on frame-entry, in an uninitialized state. Subsequent statements within a function may or may not initialize the local variables. Local variables can be used only after they have been initialized through all reachable control flow paths.

In this next example, init_after_if is initialized after the if expression while uninit_after_if is not because it is not initialized in the else case.

#![allow(unused)]
fn main() {
fn random_bool() -> bool { true }
fn initialization_example() {
    let init_after_if: ();
    let uninit_after_if: ();

    if random_bool() {
        init_after_if = ();
        uninit_after_if = ();
    } else {
        init_after_if = ();
    }

    init_after_if; // ok
    // uninit_after_if; // err: use of possibly uninitialized `uninit_after_if`
}
}

Linkage

Note: This section is described more in terms of the compiler than of the language.

The compiler supports various methods to link crates together both statically and dynamically. This section will explore the various methods to link crates together, and more information about native libraries can be found in the FFI section of the book.

In one session of compilation, the compiler can generate multiple artifacts through the usage of either command line flags or the crate_type attribute. If one or more command line flags are specified, all crate_type attributes will be ignored in favor of only building the artifacts specified by command line.

  • --crate-type=bin, #![crate_type = "bin"] - A runnable executable will be produced. This requires that there is a main function in the crate which will be run when the program begins executing. This will link in all Rust and native dependencies, producing a single distributable binary. This is the default crate type.

  • --crate-type=lib, #![crate_type = "lib"] - A Rust library will be produced. This is an ambiguous concept as to what exactly is produced because a library can manifest itself in several forms. The purpose of this generic lib option is to generate the “compiler recommended” style of library. The output library will always be usable by rustc, but the actual type of library may change from time-to-time. The remaining output types are all different flavors of libraries, and the lib type can be seen as an alias for one of them (but the actual one is compiler-defined).

  • --crate-type=dylib, #![crate_type = "dylib"] - A dynamic Rust library will be produced. This is different from the lib output type in that this forces dynamic library generation. The resulting dynamic library can be used as a dependency for other libraries and/or executables. This output type will create *.so files on Linux, *.dylib files on macOS, and *.dll files on Windows.

  • --crate-type=staticlib, #![crate_type = "staticlib"] - A static system library will be produced. This is different from other library outputs in that the compiler will never attempt to link to staticlib outputs. The purpose of this output type is to create a static library containing all of the local crate’s code along with all upstream dependencies. This output type will create *.a files on Linux, macOS and Windows (MinGW), and *.lib files on Windows (MSVC). This format is recommended for use in situations such as linking Rust code into an existing non-Rust application because it will not have dynamic dependencies on other Rust code.

    Note that any dynamic dependencies that the static library may have (such as dependencies on system libraries, or dependencies on Rust libraries that are compiled as dynamic libraries) will have to be specified manually when linking that static library from somewhere. The --print=native-static-libs flag may help with this.

    Note that, because the resulting static library contains the code of all the dependencies, including the standard library, and also exports all public symbols of them, linking the static library into an executable or shared library may need special care. In case of a shared library the list of exported symbols will have to be limited via e.g. a linker or symbol version script, exported symbols list (macOS), or module definition file (Windows). Additionally, unused sections can be removed to remove all code of dependencies that is not actually used (e.g. --gc-sections or -dead_strip for macOS).

  • --crate-type=cdylib, #![crate_type = "cdylib"] - A dynamic system library will be produced. This is used when compiling a dynamic library to be loaded from another language. This output type will create *.so files on Linux, *.dylib files on macOS, and *.dll files on Windows.

  • --crate-type=rlib, #![crate_type = "rlib"] - A “Rust library” file will be produced. This is used as an intermediate artifact and can be thought of as a “static Rust library”. These rlib files, unlike staticlib files, are interpreted by the compiler in future linkage. This essentially means that rustc will look for metadata in rlib files like it looks for metadata in dynamic libraries. This form of output is used to produce statically linked executables as well as staticlib outputs.

  • --crate-type=proc-macro, #![crate_type = "proc-macro"] - The output produced is not specified, but if a -L path is provided to it then the compiler will recognize the output artifacts as a macro and it can be loaded for a program. Crates compiled with this crate type must only export procedural macros. The compiler will automatically set the proc_macro configuration option. The crates are always compiled with the same target that the compiler itself was built with. For example, if you are executing the compiler from Linux with an x86_64 CPU, the target will be x86_64-unknown-linux-gnu even if the crate is a dependency of another crate being built for a different target.

Note that these outputs are stackable in the sense that if multiple are specified, then the compiler will produce each form of output without having to recompile. However, this only applies for outputs specified by the same method. If only crate_type attributes are specified, then they will all be built, but if one or more --crate-type command line flags are specified, then only those outputs will be built.

With all these different kinds of outputs, if crate A depends on crate B, then the compiler could find B in various different forms throughout the system. The only forms looked for by the compiler, however, are the rlib format and the dynamic library format. With these two options for a dependent library, the compiler must at some point make a choice between these two formats. With this in mind, the compiler follows these rules when determining what format of dependencies will be used:

  1. If a static library is being produced, all upstream dependencies are required to be available in rlib formats. This requirement stems from the reason that a dynamic library cannot be converted into a static format.

    Note that it is impossible to link in native dynamic dependencies to a static library, and in this case warnings will be printed about all unlinked native dynamic dependencies.

  2. If an rlib file is being produced, then there are no restrictions on what format the upstream dependencies are available in. It is simply required that all upstream dependencies be available for reading metadata from.

    The reason for this is that rlib files do not contain any of their upstream dependencies. It wouldn’t be very efficient for all rlib files to contain a copy of libstd.rlib!

  3. If an executable is being produced and the -C prefer-dynamic flag is not specified, then dependencies are first attempted to be found in the rlib format. If some dependencies are not available in an rlib format, then dynamic linking is attempted (see below).

  4. If a dynamic library or an executable that is being dynamically linked is being produced, then the compiler will attempt to reconcile the available dependencies in either the rlib or dylib format to create a final product.

    A major goal of the compiler is to ensure that a library never appears more than once in any artifact. For example, if dynamic libraries B and C were each statically linked to library A, then a crate could not link to B and C together because there would be two copies of A. The compiler allows mixing the rlib and dylib formats, but this restriction must be satisfied.

    The compiler currently implements no method of hinting what format a library should be linked with. When dynamically linking, the compiler will attempt to maximize dynamic dependencies while still allowing some dependencies to be linked in via an rlib.

    For most situations, having all libraries available as a dylib is recommended if dynamically linking. For other situations, the compiler will emit a warning if it is unable to determine which formats to link each library with.

In general, --crate-type=bin or --crate-type=lib should be sufficient for all compilation needs, and the other options are just available if more fine-grained control is desired over the output format of a crate.

Static and dynamic C runtimes

The standard library in general strives to support both statically linked and dynamically linked C runtimes for targets as appropriate. For example the x86_64-pc-windows-msvc and x86_64-unknown-linux-musl targets typically come with both runtimes and the user selects which one they’d like. All targets in the compiler have a default mode of linking to the C runtime. Typically targets are linked dynamically by default, but there are exceptions which are static by default such as:

  • arm-unknown-linux-musleabi
  • arm-unknown-linux-musleabihf
  • armv7-unknown-linux-musleabihf
  • i686-unknown-linux-musl
  • x86_64-unknown-linux-musl

The linkage of the C runtime is configured to respect the crt-static target feature. These target features are typically configured from the command line via flags to the compiler itself. For example to enable a static runtime you would execute:

rustc -C target-feature=+crt-static foo.rs

whereas to link dynamically to the C runtime you would execute:

rustc -C target-feature=-crt-static foo.rs

Targets which do not support switching between linkage of the C runtime will ignore this flag. It’s recommended to inspect the resulting binary to ensure that it’s linked as you would expect after the compiler succeeds.

Crates may also learn about how the C runtime is being linked. Code on MSVC, for example, needs to be compiled differently (e.g. with /MT or /MD) depending on the runtime being linked. This is exported currently through the cfg attribute target_feature option:

#![allow(unused)]
fn main() {
#[cfg(target_feature = "crt-static")]
fn foo() {
    println!("the C runtime should be statically linked");
}

#[cfg(not(target_feature = "crt-static"))]
fn foo() {
    println!("the C runtime should be dynamically linked");
}
}

Also note that Cargo build scripts can learn about this feature through environment variables. In a build script you can detect the linkage via:

use std::env;

fn main() {
    let linkage = env::var("CARGO_CFG_TARGET_FEATURE").unwrap_or(String::new());

    if linkage.contains("crt-static") {
        println!("the C runtime will be statically linked");
    } else {
        println!("the C runtime will be dynamically linked");
    }
}

To use this feature locally, you typically will use the RUSTFLAGS environment variable to specify flags to the compiler through Cargo. For example to compile a statically linked binary on MSVC you would execute:

RUSTFLAGS='-C target-feature=+crt-static' cargo build --target x86_64-pc-windows-msvc

Inline assembly

Support for inline assembly is provided via the asm! and global_asm! macros. It can be used to embed handwritten assembly in the assembly output generated by the compiler.

Support for inline assembly is stable on the following architectures:

  • x86 and x86-64
  • ARM
  • AArch64
  • RISC-V
  • LoongArch

The compiler will emit an error if asm! is used on an unsupported target.

Example

#![allow(unused)]
fn main() {
#[cfg(target_arch = "x86_64")] {
use std::arch::asm;

// Multiply x by 6 using shifts and adds
let mut x: u64 = 4;
unsafe {
    asm!(
        "mov {tmp}, {x}",
        "shl {tmp}, 1",
        "shl {x}, 2",
        "add {x}, {tmp}",
        x = inout(reg) x,
        tmp = out(reg) _,
    );
}
assert_eq!(x, 4 * 6);
}
}

Syntax

The following ABNF specifies the general syntax:

format_string := STRING_LITERAL / RAW_STRING_LITERAL
dir_spec := "in" / "out" / "lateout" / "inout" / "inlateout"
reg_spec := <register class> / "\"" <explicit register> "\""
operand_expr := expr / "_" / expr "=>" expr / expr "=>" "_"
reg_operand := [ident "="] dir_spec "(" reg_spec ")" operand_expr / sym <path> / const <expr>
clobber_abi := "clobber_abi(" <abi> *("," <abi>) [","] ")"
option := "pure" / "nomem" / "readonly" / "preserves_flags" / "noreturn" / "nostack" / "att_syntax" / "raw"
options := "options(" option *("," option) [","] ")"
operand := reg_operand / clobber_abi / options
asm := "asm!(" format_string *("," format_string) *("," operand) [","] ")"
global_asm := "global_asm!(" format_string *("," format_string) *("," operand) [","] ")"

Scope

Inline assembly can be used in one of two ways.

With the asm! macro, the assembly code is emitted in a function scope and integrated into the compiler-generated assembly code of a function. This assembly code must obey strict rules to avoid undefined behavior. Note that in some cases the compiler may choose to emit the assembly code as a separate function and generate a call to it.

With the global_asm! macro, the assembly code is emitted in a global scope, outside a function. This can be used to hand-write entire functions using assembly code, and generally provides much more freedom to use arbitrary registers and assembler directives.

Template string arguments

The assembler template uses the same syntax as format strings (i.e. placeholders are specified by curly braces).

The corresponding arguments are accessed in order, by index, or by name.

However, implicit named arguments (introduced by RFC #2795) are not supported.

An asm! invocation may have one or more template string arguments; an asm! with multiple template string arguments is treated as if all the strings were concatenated with a \n between them. The expected usage is for each template string argument to correspond to a line of assembly code.

All template string arguments must appear before any other arguments.

As with format strings, positional arguments must appear before named arguments and explicit register operands.

Explicit register operands cannot be used by placeholders in the template string.

All other named and positional operands must appear at least once in the template string, otherwise a compiler error is generated.

The exact assembly code syntax is target-specific and opaque to the compiler except for the way operands are substituted into the template string to form the code passed to the assembler.

Currently, all supported targets follow the assembly code syntax used by LLVM’s internal assembler which usually corresponds to that of the GNU assembler (GAS). On x86, the .intel_syntax noprefix mode of GAS is used by default. On ARM, the .syntax unified mode is used. These targets impose an additional restriction on the assembly code: any assembler state (e.g. the current section which can be changed with .section) must be restored to its original value at the end of the asm string. Assembly code that does not conform to the GAS syntax will result in assembler-specific behavior. Further constraints on the directives used by inline assembly are indicated by Directives Support.

Operand type

Several types of operands are supported:

  • in(<reg>) <expr>
    • <reg> can refer to a register class or an explicit register. The allocated register name is substituted into the asm template string.
    • The allocated register will contain the value of <expr> at the start of the asm code.
    • The allocated register must contain the same value at the end of the asm code (except if a lateout is allocated to the same register).
  • out(<reg>) <expr>
    • <reg> can refer to a register class or an explicit register. The allocated register name is substituted into the asm template string.
    • The allocated register will contain an undefined value at the start of the asm code.
    • <expr> must be a (possibly uninitialized) place expression, to which the contents of the allocated register are written at the end of the asm code.
    • An underscore (_) may be specified instead of an expression, which will cause the contents of the register to be discarded at the end of the asm code (effectively acting as a clobber).
  • lateout(<reg>) <expr>
    • Identical to out except that the register allocator can reuse a register allocated to an in.
    • You should only write to the register after all inputs are read, otherwise you may clobber an input.
  • inout(<reg>) <expr>
    • <reg> can refer to a register class or an explicit register. The allocated register name is substituted into the asm template string.
    • The allocated register will contain the value of <expr> at the start of the asm code.
    • <expr> must be a mutable initialized place expression, to which the contents of the allocated register are written at the end of the asm code.
  • inout(<reg>) <in expr> => <out expr>
    • Same as inout except that the initial value of the register is taken from the value of <in expr>.
    • <out expr> must be a (possibly uninitialized) place expression, to which the contents of the allocated register are written at the end of the asm code.
    • An underscore (_) may be specified instead of an expression for <out expr>, which will cause the contents of the register to be discarded at the end of the asm code (effectively acting as a clobber).
    • <in expr> and <out expr> may have different types.
  • inlateout(<reg>) <expr> / inlateout(<reg>) <in expr> => <out expr>
    • Identical to inout except that the register allocator can reuse a register allocated to an in (this can happen if the compiler knows the in has the same initial value as the inlateout).
    • You should only write to the register after all inputs are read, otherwise you may clobber an input.
  • sym <path>
    • <path> must refer to a fn or static.
    • A mangled symbol name referring to the item is substituted into the asm template string.
    • The substituted string does not include any modifiers (e.g. GOT, PLT, relocations, etc).
    • <path> is allowed to point to a #[thread_local] static, in which case the asm code can combine the symbol with relocations (e.g. @plt, @TPOFF) to read from thread-local data.
  • const <expr>
    • <expr> must be an integer constant expression. This expression follows the same rules as inline const blocks.
    • The type of the expression may be any integer type, but defaults to i32 just like integer literals.
    • The value of the expression is formatted as a string and substituted directly into the asm template string.

Operand expressions are evaluated from left to right, just like function call arguments. After the asm! has executed, outputs are written to in left to right order. This is significant if two outputs point to the same place: that place will contain the value of the rightmost output.

Since global_asm! exists outside a function, it can only use sym and const operands.

Register operands

Input and output operands can be specified either as an explicit register or as a register class from which the register allocator can select a register. Explicit registers are specified as string literals (e.g. "eax") while register classes are specified as identifiers (e.g. reg).

Note that explicit registers treat register aliases (e.g. r14 vs lr on ARM) and smaller views of a register (e.g. eax vs rax) as equivalent to the base register.

It is a compile-time error to use the same explicit register for two input operands or two output operands.

Additionally, it is also a compile-time error to use overlapping registers (e.g. ARM VFP) in input operands or in output operands.

Only the following types are allowed as operands for inline assembly:

  • Integers (signed and unsigned)
  • Floating-point numbers
  • Pointers (thin only)
  • Function pointers
  • SIMD vectors (structs defined with #[repr(simd)] and which implement Copy). This includes architecture-specific vector types defined in std::arch such as __m128 (x86) or int8x16_t (ARM).

Here is the list of currently supported register classes:

ArchitectureRegister classRegistersLLVM constraint code
x86regax, bx, cx, dx, si, di, bp, r[8-15] (x86-64 only)r
x86reg_abcdax, bx, cx, dxQ
x86-32reg_byteal, bl, cl, dl, ah, bh, ch, dhq
x86-64reg_byte*al, bl, cl, dl, sil, dil, bpl, r[8-15]bq
x86xmm_regxmm[0-7] (x86) xmm[0-15] (x86-64)x
x86ymm_regymm[0-7] (x86) ymm[0-15] (x86-64)x
x86zmm_regzmm[0-7] (x86) zmm[0-31] (x86-64)v
x86kregk[1-7]Yk
x86kreg0k0Only clobbers
x86x87_regst([0-7])Only clobbers
x86mmx_regmm[0-7]Only clobbers
x86-64tmm_regtmm[0-7]Only clobbers
AArch64regx[0-30]r
AArch64vregv[0-31]w
AArch64vreg_low16v[0-15]x
AArch64pregp[0-15], ffrOnly clobbers
ARM (ARM/Thumb2)regr[0-12], r14r
ARM (Thumb1)regr[0-7]r
ARMsregs[0-31]t
ARMsreg_low16s[0-15]x
ARMdregd[0-31]w
ARMdreg_low16d[0-15]t
ARMdreg_low8d[0-8]x
ARMqregq[0-15]w
ARMqreg_low8q[0-7]t
ARMqreg_low4q[0-3]x
RISC-Vregx1, x[5-7], x[9-15], x[16-31] (non-RV32E)r
RISC-Vfregf[0-31]f
RISC-Vvregv[0-31]Only clobbers
LoongArchreg$r1, $r[4-20], $r[23,30]r
LoongArchfreg$f[0-31]f

Notes:

  • On x86 we treat reg_byte differently from reg because the compiler can allocate al and ah separately whereas reg reserves the whole register.
  • On x86-64 the high byte registers (e.g. ah) are not available in the reg_byte register class.
  • Some register classes are marked as “Only clobbers” which means that registers in these classes cannot be used for inputs or outputs, only clobbers of the form out(<explicit register>) _ or lateout(<explicit register>) _.

Each register class has constraints on which value types they can be used with. This is necessary because the way a value is loaded into a register depends on its type. For example, on big-endian systems, loading a i32x4 and a i8x16 into a SIMD register may result in different register contents even if the byte-wise memory representation of both values is identical. The availability of supported types for a particular register class may depend on what target features are currently enabled.

ArchitectureRegister classTarget featureAllowed types
x86-32regNonei16, i32, f32
x86-64regNonei16, i32, f32, i64, f64
x86reg_byteNonei8
x86xmm_regssei32, f32, i64, f64,
i8x16, i16x8, i32x4, i64x2, f32x4, f64x2
x86ymm_regavxi32, f32, i64, f64,
i8x16, i16x8, i32x4, i64x2, f32x4, f64x2
i8x32, i16x16, i32x8, i64x4, f32x8, f64x4
x86zmm_regavx512fi32, f32, i64, f64,
i8x16, i16x8, i32x4, i64x2, f32x4, f64x2
i8x32, i16x16, i32x8, i64x4, f32x8, f64x4
i8x64, i16x32, i32x16, i64x8, f32x16, f64x8
x86kregavx512fi8, i16
x86kregavx512bwi32, i64
x86mmx_regN/AOnly clobbers
x86x87_regN/AOnly clobbers
x86tmm_regN/AOnly clobbers
AArch64regNonei8, i16, i32, f32, i64, f64
AArch64vregneoni8, i16, i32, f32, i64, f64,
i8x8, i16x4, i32x2, i64x1, f32x2, f64x1,
i8x16, i16x8, i32x4, i64x2, f32x4, f64x2
AArch64pregN/AOnly clobbers
ARMregNonei8, i16, i32, f32
ARMsregvfp2i32, f32
ARMdregvfp2i64, f64, i8x8, i16x4, i32x2, i64x1, f32x2
ARMqregneoni8x16, i16x8, i32x4, i64x2, f32x4
RISC-V32regNonei8, i16, i32, f32
RISC-V64regNonei8, i16, i32, f32, i64, f64
RISC-Vfregff32
RISC-Vfregdf64
RISC-VvregN/AOnly clobbers
LoongArch64regNonei8, i16, i32, i64, f32, f64
LoongArch64fregNonef32, f64

Note: For the purposes of the above table pointers, function pointers and isize/usize are treated as the equivalent integer type (i16/i32/i64 depending on the target).

If a value is of a smaller size than the register it is allocated in then the upper bits of that register will have an undefined value for inputs and will be ignored for outputs. The only exception is the freg register class on RISC-V where f32 values are NaN-boxed in a f64 as required by the RISC-V architecture.

When separate input and output expressions are specified for an inout operand, both expressions must have the same type. The only exception is if both operands are pointers or integers, in which case they are only required to have the same size. This restriction exists because the register allocators in LLVM and GCC sometimes cannot handle tied operands with different types.

Register names

Some registers have multiple names. These are all treated by the compiler as identical to the base register name. Here is the list of all supported register aliases:

ArchitectureBase registerAliases
x86axeax, rax
x86bxebx, rbx
x86cxecx, rcx
x86dxedx, rdx
x86siesi, rsi
x86diedi, rdi
x86bpbpl, ebp, rbp
x86spspl, esp, rsp
x86ipeip, rip
x86st(0)st
x86r[8-15]r[8-15]b, r[8-15]w, r[8-15]d
x86xmm[0-31]ymm[0-31], zmm[0-31]
AArch64x[0-30]w[0-30]
AArch64x29fp
AArch64x30lr
AArch64spwsp
AArch64xzrwzr
AArch64v[0-31]b[0-31], h[0-31], s[0-31], d[0-31], q[0-31]
ARMr[0-3]a[1-4]
ARMr[4-9]v[1-6]
ARMr9rfp
ARMr10sl
ARMr11fp
ARMr12ip
ARMr13sp
ARMr14lr
ARMr15pc
RISC-Vx0zero
RISC-Vx1ra
RISC-Vx2sp
RISC-Vx3gp
RISC-Vx4tp
RISC-Vx[5-7]t[0-2]
RISC-Vx8fp, s0
RISC-Vx9s1
RISC-Vx[10-17]a[0-7]
RISC-Vx[18-27]s[2-11]
RISC-Vx[28-31]t[3-6]
RISC-Vf[0-7]ft[0-7]
RISC-Vf[8-9]fs[0-1]
RISC-Vf[10-17]fa[0-7]
RISC-Vf[18-27]fs[2-11]
RISC-Vf[28-31]ft[8-11]
LoongArch$r0$zero
LoongArch$r1$ra
LoongArch$r2$tp
LoongArch$r3$sp
LoongArch$r[4-11]$a[0-7]
LoongArch$r[12-20]$t[0-8]
LoongArch$r21
LoongArch$r22$fp, $s9
LoongArch$r[23-31]$s[0-8]
LoongArch$f[0-7]$fa[0-7]
LoongArch$f[8-23]$ft[0-15]
LoongArch$f[24-31]$fs[0-7]

Some registers cannot be used for input or output operands:

ArchitectureUnsupported registerReason
AllspThe stack pointer must be restored to its original value at the end of an asm code block.
Allbp (x86), x29 (AArch64), x8 (RISC-V), $fp (LoongArch)The frame pointer cannot be used as an input or output.
ARMr7 or r11On ARM the frame pointer can be either r7 or r11 depending on the target. The frame pointer cannot be used as an input or output.
Allsi (x86-32), bx (x86-64), r6 (ARM), x19 (AArch64), x9 (RISC-V), $s8 (LoongArch)This is used internally by LLVM as a “base pointer” for functions with complex stack frames.
x86ipThis is the program counter, not a real register.
AArch64xzrThis is a constant zero register which can’t be modified.
AArch64x18This is an OS-reserved register on some AArch64 targets.
ARMpcThis is the program counter, not a real register.
ARMr9This is an OS-reserved register on some ARM targets.
RISC-Vx0This is a constant zero register which can’t be modified.
RISC-Vgp, tpThese registers are reserved and cannot be used as inputs or outputs.
LoongArch$r0 or $zeroThis is a constant zero register which can’t be modified.
LoongArch$r2 or $tpThis is reserved for TLS.
LoongArch$r21This is reserved by the ABI.

The frame pointer and base pointer registers are reserved for internal use by LLVM. While asm! statements cannot explicitly specify the use of reserved registers, in some cases LLVM will allocate one of these reserved registers for reg operands. Assembly code making use of reserved registers should be careful since reg operands may use the same registers.

Template modifiers

The placeholders can be augmented by modifiers which are specified after the : in the curly braces. These modifiers do not affect register allocation, but change the way operands are formatted when inserted into the template string.

Only one modifier is allowed per template placeholder.

The supported modifiers are a subset of LLVM’s (and GCC’s) asm template argument modifiers, but do not use the same letter codes.

ArchitectureRegister classModifierExample outputLLVM modifier
x86-32regNoneeaxk
x86-64regNoneraxq
x86-32reg_abcdlalb
x86-64reglalb
x86reg_abcdhahh
x86regxaxw
x86regeeaxk
x86-64regrraxq
x86reg_byteNoneal / ahNone
x86xmm_regNonexmm0x
x86ymm_regNoneymm0t
x86zmm_regNonezmm0g
x86*mm_regxxmm0x
x86*mm_regyymm0t
x86*mm_regzzmm0g
x86kregNonek1None
AArch64regNonex0x
AArch64regww0w
AArch64regxx0x
AArch64vregNonev0None
AArch64vregvv0None
AArch64vregbb0b
AArch64vreghh0h
AArch64vregss0s
AArch64vregdd0d
AArch64vregqq0q
ARMregNoner0None
ARMsregNones0None
ARMdregNoned0P
ARMqregNoneq0q
ARMqrege / fd0 / d1e / f
RISC-VregNonex1None
RISC-VfregNonef0None
LoongArchregNone$r1None
LoongArchfregNone$f0None

Notes:

  • on ARM e / f: this prints the low or high doubleword register name of a NEON quad (128-bit) register.
  • on x86: our behavior for reg with no modifiers differs from what GCC does. GCC will infer the modifier based on the operand value type, while we default to the full register size.
  • on x86 xmm_reg: the x, t and g LLVM modifiers are not yet implemented in LLVM (they are supported by GCC only), but this should be a simple change.

As stated in the previous section, passing an input value smaller than the register width will result in the upper bits of the register containing undefined values. This is not a problem if the inline asm only accesses the lower bits of the register, which can be done by using a template modifier to use a subregister name in the asm code (e.g. ax instead of rax). Since this an easy pitfall, the compiler will suggest a template modifier to use where appropriate given the input type. If all references to an operand already have modifiers then the warning is suppressed for that operand.

ABI clobbers

The clobber_abi keyword can be used to apply a default set of clobbers to an asm! block. This will automatically insert the necessary clobber constraints as needed for calling a function with a particular calling convention: if the calling convention does not fully preserve the value of a register across a call then lateout("...") _ is implicitly added to the operands list (where the ... is replaced by the register’s name).

clobber_abi may be specified any number of times. It will insert a clobber for all unique registers in the union of all specified calling conventions.

Generic register class outputs are disallowed by the compiler when clobber_abi is used: all outputs must specify an explicit register.

Explicit register outputs have precedence over the implicit clobbers inserted by clobber_abi: a clobber will only be inserted for a register if that register is not used as an output.

The following ABIs can be used with clobber_abi:

ArchitectureABI nameClobbered registers
x86-32"C", "system", "efiapi", "cdecl", "stdcall", "fastcall"ax, cx, dx, xmm[0-7], mm[0-7], k[0-7], st([0-7])
x86-64"C", "system" (on Windows), "efiapi", "win64"ax, cx, dx, r[8-11], xmm[0-31], mm[0-7], k[0-7], st([0-7]), tmm[0-7]
x86-64"C", "system" (on non-Windows), "sysv64"ax, cx, dx, si, di, r[8-11], xmm[0-31], mm[0-7], k[0-7], st([0-7]), tmm[0-7]
AArch64"C", "system", "efiapi"x[0-17], x18*, x30, v[0-31], p[0-15], ffr
ARM"C", "system", "efiapi", "aapcs"r[0-3], r12, r14, s[0-15], d[0-7], d[16-31]
RISC-V"C", "system", "efiapi"x1, x[5-7], x[10-17], x[28-31], f[0-7], f[10-17], f[28-31], v[0-31]
LoongArch"C", "system", "efiapi"$r1, $r[4-20], $f[0-23]

Notes:

  • On AArch64 x18 only included in the clobber list if it is not considered as a reserved register on the target.

The list of clobbered registers for each ABI is updated in rustc as architectures gain new registers: this ensures that asm! clobbers will continue to be correct when LLVM starts using these new registers in its generated code.

Options

Flags are used to further influence the behavior of the inline assembly block. Currently the following options are defined:

  • pure: The asm! block has no side effects, must eventually return, and its outputs depend only on its direct inputs (i.e. the values themselves, not what they point to) or values read from memory (unless the nomem options is also set). This allows the compiler to execute the asm! block fewer times than specified in the program (e.g. by hoisting it out of a loop) or even eliminate it entirely if the outputs are not used. The pure option must be combined with either the nomem or readonly options, otherwise a compile-time error is emitted.
  • nomem: The asm! blocks does not read or write to any memory. This allows the compiler to cache the values of modified global variables in registers across the asm! block since it knows that they are not read or written to by the asm!. The compiler also assumes that this asm! block does not perform any kind of synchronization with other threads, e.g. via fences.
  • readonly: The asm! block does not write to any memory. This allows the compiler to cache the values of unmodified global variables in registers across the asm! block since it knows that they are not written to by the asm!. The compiler also assumes that this asm! block does not perform any kind of synchronization with other threads, e.g. via fences.
  • preserves_flags: The asm! block does not modify the flags register (defined in the rules below). This allows the compiler to avoid recomputing the condition flags after the asm! block.
  • noreturn: The asm! block never returns, and its return type is defined as ! (never). Behavior is undefined if execution falls through past the end of the asm code. A noreturn asm block behaves just like a function which doesn’t return; notably, local variables in scope are not dropped before it is invoked.
  • nostack: The asm! block does not push data to the stack, or write to the stack red-zone (if supported by the target). If this option is not used then the stack pointer is guaranteed to be suitably aligned (according to the target ABI) for a function call.
  • att_syntax: This option is only valid on x86, and causes the assembler to use the .att_syntax prefix mode of the GNU assembler. Register operands are substituted in with a leading %.
  • raw: This causes the template string to be parsed as a raw assembly string, with no special handling for { and }. This is primarily useful when including raw assembly code from an external file using include_str!.

The compiler performs some additional checks on options:

  • The nomem and readonly options are mutually exclusive: it is a compile-time error to specify both.
  • It is a compile-time error to specify pure on an asm block with no outputs or only discarded outputs (_).
  • It is a compile-time error to specify noreturn on an asm block with outputs.

global_asm! only supports the att_syntax and raw options. The remaining options are not meaningful for global-scope inline assembly

Rules for inline assembly

To avoid undefined behavior, these rules must be followed when using function-scope inline assembly (asm!):

  • Any registers not specified as inputs will contain an undefined value on entry to the asm block.
    • An “undefined value” in the context of inline assembly means that the register can (non-deterministically) have any one of the possible values allowed by the architecture. Notably it is not the same as an LLVM undef which can have a different value every time you read it (since such a concept does not exist in assembly code).
  • Any registers not specified as outputs must have the same value upon exiting the asm block as they had on entry, otherwise behavior is undefined.
    • This only applies to registers which can be specified as an input or output. Other registers follow target-specific rules.
    • Note that a lateout may be allocated to the same register as an in, in which case this rule does not apply. Code should not rely on this however since it depends on the results of register allocation.
  • Behavior is undefined if execution unwinds out of an asm block.
    • This also applies if the assembly code calls a function which then unwinds.
  • The set of memory locations that assembly code is allowed to read and write are the same as those allowed for an FFI function.
    • Refer to the unsafe code guidelines for the exact rules.
    • If the readonly option is set, then only memory reads are allowed.
    • If the nomem option is set then no reads or writes to memory are allowed.
    • These rules do not apply to memory which is private to the asm code, such as stack space allocated within the asm block.
  • The compiler cannot assume that the instructions in the asm are the ones that will actually end up executed.
    • This effectively means that the compiler must treat the asm! as a black box and only take the interface specification into account, not the instructions themselves.
    • Runtime code patching is allowed, via target-specific mechanisms.
    • However there is no guarantee that each asm! directly corresponds to a single instance of instructions in the object file: the compiler is free to duplicate or deduplicate asm! blocks.
  • Unless the nostack option is set, asm code is allowed to use stack space below the stack pointer.
    • On entry to the asm block the stack pointer is guaranteed to be suitably aligned (according to the target ABI) for a function call.
    • You are responsible for making sure you don’t overflow the stack (e.g. use stack probing to ensure you hit a guard page).
    • You should adjust the stack pointer when allocating stack memory as required by the target ABI.
    • The stack pointer must be restored to its original value before leaving the asm block.
  • If the noreturn option is set then behavior is undefined if execution falls through to the end of the asm block.
  • If the pure option is set then behavior is undefined if the asm! has side-effects other than its direct outputs. Behavior is also undefined if two executions of the asm! code with the same inputs result