Struct std::sync::atomic::AtomicU32[][src]

pub struct AtomicU32 { /* fields omitted */ }
🔬 This is a nightly-only experimental API. (integer_atomics #32976)

An integer type which can be safely shared between threads.

This type has the same in-memory representation as the underlying integer type, u32. For more about the differences between atomic types and non-atomic types, please see the module-level documentation.

Methods

impl AtomicU32
[src]

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Creates a new atomic integer.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::AtomicU32;

let atomic_forty_two = AtomicU32::new(42);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Returns a mutable reference to the underlying integer.

This is safe because the mutable reference guarantees that no other threads are concurrently accessing the atomic data.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let mut some_var = AtomicU32::new(10);
assert_eq!(*some_var.get_mut(), 10);
*some_var.get_mut() = 5;
assert_eq!(some_var.load(Ordering::SeqCst), 5);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Consumes the atomic and returns the contained value.

This is safe because passing self by value guarantees that no other threads are concurrently accessing the atomic data.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::AtomicU32;

let some_var = AtomicU32::new(5);
assert_eq!(some_var.into_inner(), 5);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Loads a value from the atomic integer.

load takes an Ordering argument which describes the memory ordering of this operation.

Panics

Panics if order is Release or AcqRel.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let some_var = AtomicU32::new(5);

assert_eq!(some_var.load(Ordering::Relaxed), 5);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Stores a value into the atomic integer.

store takes an Ordering argument which describes the memory ordering of this operation.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let some_var = AtomicU32::new(5);

some_var.store(10, Ordering::Relaxed);
assert_eq!(some_var.load(Ordering::Relaxed), 10);Run

Panics

Panics if order is Acquire or AcqRel.

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Stores a value into the atomic integer, returning the previous value.

swap takes an Ordering argument which describes the memory ordering of this operation.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let some_var = AtomicU32::new(5);

assert_eq!(some_var.swap(10, Ordering::Relaxed), 5);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Stores a value into the atomic integer if the current value is the same as the current value.

The return value is always the previous value. If it is equal to current, then the value was updated.

compare_and_swap also takes an Ordering argument which describes the memory ordering of this operation.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let some_var = AtomicU32::new(5);

assert_eq!(some_var.compare_and_swap(5, 10, Ordering::Relaxed), 5);
assert_eq!(some_var.load(Ordering::Relaxed), 10);

assert_eq!(some_var.compare_and_swap(6, 12, Ordering::Relaxed), 10);
assert_eq!(some_var.load(Ordering::Relaxed), 10);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Stores a value into the atomic integer if the current value is the same as the current value.

The return value is a result indicating whether the new value was written and containing the previous value. On success this value is guaranteed to be equal to current.

compare_exchange takes two Ordering arguments to describe the memory ordering of this operation. The first describes the required ordering if the operation succeeds while the second describes the required ordering when the operation fails. The failure ordering can't be Release or AcqRel and must be equivalent or weaker than the success ordering.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let some_var = AtomicU32::new(5);

assert_eq!(some_var.compare_exchange(5, 10,
                                     Ordering::Acquire,
                                     Ordering::Relaxed),
           Ok(5));
assert_eq!(some_var.load(Ordering::Relaxed), 10);

assert_eq!(some_var.compare_exchange(6, 12,
                                     Ordering::SeqCst,
                                     Ordering::Acquire),
           Err(10));
assert_eq!(some_var.load(Ordering::Relaxed), 10);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Stores a value into the atomic integer if the current value is the same as the current value.

Unlike compare_exchange, this function is allowed to spuriously fail even when the comparison succeeds, which can result in more efficient code on some platforms. The return value is a result indicating whether the new value was written and containing the previous value.

compare_exchange_weak takes two Ordering arguments to describe the memory ordering of this operation. The first describes the required ordering if the operation succeeds while the second describes the required ordering when the operation fails. The failure ordering can't be Release or AcqRel and must be equivalent or weaker than the success ordering.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let val = AtomicU32::new(4);

let mut old = val.load(Ordering::Relaxed);
loop {
    let new = old * 2;
    match val.compare_exchange_weak(old, new, Ordering::SeqCst, Ordering::Relaxed) {
        Ok(_) => break,
        Err(x) => old = x,
    }
}Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Adds to the current value, returning the previous value.

This operation wraps around on overflow.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(0);
assert_eq!(foo.fetch_add(10, Ordering::SeqCst), 0);
assert_eq!(foo.load(Ordering::SeqCst), 10);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Subtracts from the current value, returning the previous value.

This operation wraps around on overflow.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(20);
assert_eq!(foo.fetch_sub(10, Ordering::SeqCst), 20);
assert_eq!(foo.load(Ordering::SeqCst), 10);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Bitwise "and" with the current value.

Performs a bitwise "and" operation on the current value and the argument val, and sets the new value to the result.

Returns the previous value.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(0b101101);
assert_eq!(foo.fetch_and(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b100001);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Bitwise "nand" with the current value.

Performs a bitwise "nand" operation on the current value and the argument val, and sets the new value to the result.

Returns the previous value.

Examples

#![feature(integer_atomics)]


use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(0x13);
assert_eq!(foo.fetch_nand(0x31, Ordering::SeqCst), 0x13);
assert_eq!(foo.load(Ordering::SeqCst), !(0x13 & 0x31));Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Bitwise "or" with the current value.

Performs a bitwise "or" operation on the current value and the argument val, and sets the new value to the result.

Returns the previous value.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(0b101101);
assert_eq!(foo.fetch_or(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b111111);Run

🔬 This is a nightly-only experimental API. (integer_atomics #32976)

Bitwise "xor" with the current value.

Performs a bitwise "xor" operation on the current value and the argument val, and sets the new value to the result.

Returns the previous value.

Examples

#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(0b101101);
assert_eq!(foo.fetch_xor(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b011110);Run

🔬 This is a nightly-only experimental API. (no_more_cas #48655)

no more CAS loops in user code

Fetches the value, and applies a function to it that returns an optional new value. Returns a Result of Ok(previous_value) if the function returned Some(_), else Err(previous_value).

Note: This may call the function multiple times if the value has been changed from other threads in the meantime, as long as the function returns Some(_), but the function will have been applied but once to the stored value.

Examples

#![feature(no_more_cas)]
#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let x = AtomicU32::new(7);
assert_eq!(x.fetch_update(|_| None, Ordering::SeqCst, Ordering::SeqCst), Err(7));
assert_eq!(x.fetch_update(|x| Some(x + 1), Ordering::SeqCst, Ordering::SeqCst), Ok(7));
assert_eq!(x.fetch_update(|x| Some(x + 1), Ordering::SeqCst, Ordering::SeqCst), Ok(8));
assert_eq!(x.load(Ordering::SeqCst), 9);Run

🔬 This is a nightly-only experimental API. (atomic_min_max #48655)

easier and faster min/max than writing manual CAS loop

Maximum with the current value.

Finds the maximum of the current value and the argument val, and sets the new value to the result.

Returns the previous value.

Examples

#![feature(atomic_min_max)]
#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(23);
assert_eq!(foo.fetch_max(42, Ordering::SeqCst), 23);
assert_eq!(foo.load(Ordering::SeqCst), 42);Run

If you want to obtain the maximum value in one step, you can use the following:

#![feature(atomic_min_max)]
#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(23);
let bar = 42;
let max_foo = foo.fetch_max(bar, Ordering::SeqCst).max(bar);
assert!(max_foo == 42);Run

🔬 This is a nightly-only experimental API. (atomic_min_max #48655)

easier and faster min/max than writing manual CAS loop

Minimum with the current value.

Finds the minimum of the current value and the argument val, and sets the new value to the result.

Returns the previous value.

Examples

#![feature(atomic_min_max)]
#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(23);
assert_eq!(foo.fetch_min(42, Ordering::Relaxed), 23);
assert_eq!(foo.load(Ordering::Relaxed), 23);
assert_eq!(foo.fetch_min(22, Ordering::Relaxed), 23);
assert_eq!(foo.load(Ordering::Relaxed), 22);Run

If you want to obtain the minimum value in one step, you can use the following:

#![feature(atomic_min_max)]
#![feature(integer_atomics)]

use std::sync::atomic::{AtomicU32, Ordering};

let foo = AtomicU32::new(23);
let bar = 12;
let min_foo = foo.fetch_min(bar, Ordering::SeqCst).min(bar);
assert_eq!(min_foo, 12);Run

Trait Implementations

impl From<u32> for AtomicU32
[src]

Performs the conversion.

impl Sync for AtomicU32
[src]

impl Default for AtomicU32
[src]

Returns the "default value" for a type. Read more

impl Debug for AtomicU32
[src]

Formats the value using the given formatter. Read more

impl RefUnwindSafe for AtomicU32
[src]

Auto Trait Implementations

impl Send for AtomicU32