Procedural Macros

Procedural macros allow creating syntax extensions as execution of a function. Procedural macros come in one of three flavors:

Procedural macros allow you to run code at compile time that operates over Rust syntax, both consuming and producing Rust syntax. You can sort of think of procedural macros as functions from an AST to another AST.

Procedural macros must be defined in a crate with the crate type of proc-macro.

Note: When using Cargo, Procedural macro crates are defined with the proc-macro key in your manifest:

[lib]
proc-macro = true

As functions, they must either return syntax, panic, or loop endlessly. Returned syntax either replaces or adds the syntax depending on the kind of procedural macro. Panics are caught by the compiler and are turned into a compiler error. Endless loops are not caught by the compiler which hangs the compiler.

Procedural macros run during compilation, and thus have the same resources that the compiler has. For example, standard input, error, and output are the same that the compiler has access to. Similarly, file access is the same. Because of this, procedural macros have the same security concerns that Cargo’s build scripts have.

Procedural macros have two ways of reporting errors. The first is to panic. The second is to emit a compile_error macro invocation.

The proc_macro crate

Procedural macro crates almost always will link to the compiler-provided proc_macro crate. The proc_macro crate provides types required for writing procedural macros and facilities to make it easier.

This crate primarily contains a TokenStream type. Procedural macros operate over token streams instead of AST nodes, which is a far more stable interface over time for both the compiler and for procedural macros to target. A token stream is roughly equivalent to Vec<TokenTree> where a TokenTree can roughly be thought of as lexical token. For example foo is an Ident token, . is a Punct token, and 1.2 is a Literal token. The TokenStream type, unlike Vec<TokenTree>, is cheap to clone.

All tokens have an associated Span. A Span is an opaque value that cannot be modified but can be manufactured. Spans represent an extent of source code within a program and are primarily used for error reporting. While you cannot modify a Span itself, you can always change the Span associated with any token, such as through getting a Span from another token.

Procedural macro hygiene

Procedural macros are unhygienic. This means they behave as if the output token stream was simply written inline to the code it’s next to. This means that it’s affected by external items and also affects external imports.

Macro authors need to be careful to ensure their macros work in as many contexts as possible given this limitation. This often includes using absolute paths to items in libraries (for example, ::std::option::Option instead of Option) or by ensuring that generated functions have names that are unlikely to clash with other functions (like __internal_foo instead of foo).

Function-like procedural macros

Function-like procedural macros are procedural macros that are invoked using the macro invocation operator (!).

These macros are defined by a public function with the proc_macro attribute and a signature of (TokenStream) -> TokenStream. The input TokenStream is what is inside the delimiters of the macro invocation and the output TokenStream replaces the entire macro invocation.

For example, the following macro definition ignores its input and outputs a function answer into its scope.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro]
pub fn make_answer(_item: TokenStream) -> TokenStream {
    "fn answer() -> u32 { 42 }".parse().unwrap()
}

And then we use it in a binary crate to print “42” to standard output.

extern crate proc_macro_examples;
use proc_macro_examples::make_answer;

make_answer!();

fn main() {
    println!("{}", answer());
}

Function-like procedural macros may be invoked in any macro invocation position, which includes statements, expressions, patterns, type expressions, item positions, including items in extern blocks, inherent and trait implementations, and trait definitions.

Derive macros

Derive macros define new inputs for the derive attribute. These macros can create new items given the token stream of a struct, enum, or union. They can also define derive macro helper attributes.

Custom derive macros are defined by a public function with the proc_macro_derive attribute and a signature of (TokenStream) -> TokenStream.

The input TokenStream is the token stream of the item that has the derive attribute on it. The output TokenStream must be a set of items that are then appended to the module or block that the item from the input TokenStream is in.

The following is an example of a derive macro. Instead of doing anything useful with its input, it just appends a function answer.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_derive(AnswerFn)]
pub fn derive_answer_fn(_item: TokenStream) -> TokenStream {
    "fn answer() -> u32 { 42 }".parse().unwrap()
}

And then using said derive macro:

extern crate proc_macro_examples;
use proc_macro_examples::AnswerFn;

#[derive(AnswerFn)]
struct Struct;

fn main() {
    assert_eq!(42, answer());
}

Derive macro helper attributes

Derive macros can add additional attributes into the scope of the item they are on. Said attributes are called derive macro helper attributes. These attributes are inert, and their only purpose is to be fed into the derive macro that defined them. That said, they can be seen by all macros.

The way to define helper attributes is to put an attributes key in the proc_macro_derive macro with a comma separated list of identifiers that are the names of the helper attributes.

For example, the following derive macro defines a helper attribute helper, but ultimately doesn’t do anything with it.

#![crate_type="proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_derive(HelperAttr, attributes(helper))]
pub fn derive_helper_attr(_item: TokenStream) -> TokenStream {
    TokenStream::new()
}

And then usage on the derive macro on a struct:

#[derive(HelperAttr)]
struct Struct {
    #[helper] field: ()
}

Attribute macros

Attribute macros define new outer attributes which can be attached to items, including items in extern blocks, inherent and trait implementations, and trait definitions.

Attribute macros are defined by a public function with the proc_macro_attribute attribute that has a signature of (TokenStream, TokenStream) -> TokenStream. The first TokenStream is the delimited token tree following the attribute’s name, not including the outer delimiters. If the attribute is written as a bare attribute name, the attribute TokenStream is empty. The second TokenStream is the rest of the item including other attributes on the item. The returned TokenStream replaces the item with an arbitrary number of items.

For example, this attribute macro takes the input stream and returns it as is, effectively being the no-op of attributes.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_attribute]
pub fn return_as_is(_attr: TokenStream, item: TokenStream) -> TokenStream {
    item
}

This following example shows the stringified TokenStreams that the attribute macros see. The output will show in the output of the compiler. The output is shown in the comments after the function prefixed with “out:”.

// my-macro/src/lib.rs
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_attribute]
pub fn show_streams(attr: TokenStream, item: TokenStream) -> TokenStream {
    println!("attr: \"{attr}\"");
    println!("item: \"{item}\"");
    item
}
// src/lib.rs
extern crate my_macro;

use my_macro::show_streams;

// Example: Basic function
#[show_streams]
fn invoke1() {}
// out: attr: ""
// out: item: "fn invoke1() {}"

// Example: Attribute with input
#[show_streams(bar)]
fn invoke2() {}
// out: attr: "bar"
// out: item: "fn invoke2() {}"

// Example: Multiple tokens in the input
#[show_streams(multiple => tokens)]
fn invoke3() {}
// out: attr: "multiple => tokens"
// out: item: "fn invoke3() {}"

// Example:
#[show_streams { delimiters }]
fn invoke4() {}
// out: attr: "delimiters"
// out: item: "fn invoke4() {}"

Declarative macro tokens and procedural macro tokens

Declarative macro_rules macros and procedural macros use similar, but different definitions for tokens (or rather TokenTrees.)

Token trees in macro_rules (corresponding to tt matchers) are defined as

  • Delimited groups ((...), {...}, etc)
  • All operators supported by the language, both single-character and multi-character ones (+, +=).
    • Note that this set doesn’t include the single quote '.
  • Literals ("string", 1, etc)
    • Note that negation (e.g. -1) is never a part of such literal tokens, but a separate operator token.
  • Identifiers, including keywords (ident, r#ident, fn)
  • Lifetimes ('ident)
  • Metavariable substitutions in macro_rules (e.g. $my_expr in macro_rules! mac { ($my_expr: expr) => { $my_expr } } after the mac’s expansion, which will be considered a single token tree regardless of the passed expression)

Token trees in procedural macros are defined as

  • Delimited groups ((...), {...}, etc)
  • All punctuation characters used in operators supported by the language (+, but not +=), and also the single quote ' character (typically used in lifetimes, see below for lifetime splitting and joining behavior)
  • Literals ("string", 1, etc)
    • Negation (e.g. -1) is supported as a part of integer and floating point literals.
  • Identifiers, including keywords (ident, r#ident, fn)

Mismatches between these two definitions are accounted for when token streams are passed to and from procedural macros.
Note that the conversions below may happen lazily, so they might not happen if the tokens are not actually inspected.

When passed to a proc-macro

  • All multi-character operators are broken into single characters.
  • Lifetimes are broken into a ' character and an identifier.
  • All metavariable substitutions are represented as their underlying token streams.
    • Such token streams may be wrapped into delimited groups (Group) with implicit delimiters (Delimiter::None) when it’s necessary for preserving parsing priorities.
    • tt and ident substitutions are never wrapped into such groups and always represented as their underlying token trees.

When emitted from a proc macro

  • Punctuation characters are glued into multi-character operators when applicable.
  • Single quotes ' joined with identifiers are glued into lifetimes.
  • Negative literals are converted into two tokens (the - and the literal) possibly wrapped into a delimited group (Group) with implicit delimiters (Delimiter::None) when it’s necessary for preserving parsing priorities.

Note that neither declarative nor procedural macros support doc comment tokens (e.g. /// Doc), so they are always converted to token streams representing their equivalent #[doc = r"str"] attributes when passed to macros.