Struct core::num::NonZeroU32

#[repr(transparent)]
pub struct NonZeroU32(_);

An integer that is known not to equal zero.

This enables some memory layout optimization. For example, Option<NonZeroU32> is the same size as u32:

use std::mem::size_of;
assert_eq!(size_of::<Option<core::num::NonZeroU32>>(), size_of::<u32>());

Implementations

impl NonZeroU32

pub const unsafe fn new_unchecked(n: u32) -> Self

Creates a non-zero without checking whether the value is non-zero. This results in undefined behaviour if the value is zero.

Safety

The value must not be zero.

pub const fn new(n: u32) -> Option<Self>

Creates a non-zero if the given value is not zero.

pub const fn get(self) -> u32

Returns the value as a primitive type.

impl NonZeroU32

pub const fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

On many architectures, this function can perform better than leading_zeros() on the underlying integer type, as special handling of zero can be avoided.

Examples

Basic usage:

let n = std::num::NonZeroU32::new(u32::MAX).unwrap();

assert_eq!(n.leading_zeros(), 0);

pub const fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

On many architectures, this function can perform better than trailing_zeros() on the underlying integer type, as special handling of zero can be avoided.

Examples

Basic usage:

let n = std::num::NonZeroU32::new(0b0101000).unwrap();

assert_eq!(n.trailing_zeros(), 3);

impl NonZeroU32

pub const fn checked_add(self, other: u32) -> Option<NonZeroU32>

Adds an unsigned integer to a non-zero value. Checks for overflow and returns None on overflow. As a consequence, the result cannot wrap to zero.

Examples

let one = NonZeroU32::new(1)?;
let two = NonZeroU32::new(2)?;
let max = NonZeroU32::new(u32::MAX)?;

assert_eq!(Some(two), one.checked_add(1));
assert_eq!(None, max.checked_add(1));

pub const fn saturating_add(self, other: u32) -> NonZeroU32

Adds an unsigned integer to a non-zero value. Return u32::MAX on overflow.

Examples

let one = NonZeroU32::new(1)?;
let two = NonZeroU32::new(2)?;
let max = NonZeroU32::new(u32::MAX)?;

assert_eq!(two, one.saturating_add(1));
assert_eq!(max, max.saturating_add(1));

pub const unsafe fn unchecked_add(self, other: u32) -> NonZeroU32

🔬This is a nightly-only experimental API. (nonzero_ops #84186)

Adds an unsigned integer to a non-zero value, assuming overflow cannot occur. Overflow is unchecked, and it is undefined behaviour to overflow even if the result would wrap to a non-zero value. The behaviour is undefined as soon as self + rhs > u32::MAX.

Examples

#![feature(nonzero_ops)]

let one = NonZeroU32::new(1)?;
let two = NonZeroU32::new(2)?;

assert_eq!(two, unsafe { one.unchecked_add(1) });

pub const fn checked_next_power_of_two(self) -> Option<NonZeroU32>

Returns the smallest power of two greater than or equal to n. Checks for overflow and returns None if the next power of two is greater than the type’s maximum value. As a consequence, the result cannot wrap to zero.

Examples

let two = NonZeroU32::new(2)?;
let three = NonZeroU32::new(3)?;
let four = NonZeroU32::new(4)?;
let max = NonZeroU32::new(u32::MAX)?;

assert_eq!(Some(two), two.checked_next_power_of_two() );
assert_eq!(Some(four), three.checked_next_power_of_two() );
assert_eq!(None, max.checked_next_power_of_two() );

pub const fn ilog2(self) -> u32

Returns the base 2 logarithm of the number, rounded down.

This is the same operation as u32::ilog2, except that it has no failure cases to worry about since this value can never be zero.

Examples

assert_eq!(NonZeroU32::new(7).unwrap().ilog2(), 2);
assert_eq!(NonZeroU32::new(8).unwrap().ilog2(), 3);
assert_eq!(NonZeroU32::new(9).unwrap().ilog2(), 3);

pub const fn ilog10(self) -> u32

Returns the base 10 logarithm of the number, rounded down.

This is the same operation as u32::ilog10, except that it has no failure cases to worry about since this value can never be zero.

Examples

assert_eq!(NonZeroU32::new(99).unwrap().ilog10(), 1);
assert_eq!(NonZeroU32::new(100).unwrap().ilog10(), 2);
assert_eq!(NonZeroU32::new(101).unwrap().ilog10(), 2);

impl NonZeroU32

pub const fn checked_mul(self, other: NonZeroU32) -> Option<NonZeroU32>

Multiplies two non-zero integers together. Checks for overflow and returns None on overflow. As a consequence, the result cannot wrap to zero.

Examples

let two = NonZeroU32::new(2)?;
let four = NonZeroU32::new(4)?;
let max = NonZeroU32::new(u32::MAX)?;

assert_eq!(Some(four), two.checked_mul(two));
assert_eq!(None, max.checked_mul(two));

pub const fn saturating_mul(self, other: NonZeroU32) -> NonZeroU32

Multiplies two non-zero integers together. Return u32::MAX on overflow.

Examples

let two = NonZeroU32::new(2)?;
let four = NonZeroU32::new(4)?;
let max = NonZeroU32::new(u32::MAX)?;

assert_eq!(four, two.saturating_mul(two));
assert_eq!(max, four.saturating_mul(max));

pub const unsafe fn unchecked_mul(self, other: NonZeroU32) -> NonZeroU32

🔬This is a nightly-only experimental API. (nonzero_ops #84186)

Multiplies two non-zero integers together, assuming overflow cannot occur. Overflow is unchecked, and it is undefined behaviour to overflow even if the result would wrap to a non-zero value. The behaviour is undefined as soon as self * rhs > u32::MAX.

Examples

#![feature(nonzero_ops)]

let two = NonZeroU32::new(2)?;
let four = NonZeroU32::new(4)?;

assert_eq!(four, unsafe { two.unchecked_mul(two) });

pub const fn checked_pow(self, other: u32) -> Option<NonZeroU32>

Raises non-zero value to an integer power. Checks for overflow and returns None on overflow. As a consequence, the result cannot wrap to zero.

Examples

let three = NonZeroU32::new(3)?;
let twenty_seven = NonZeroU32::new(27)?;
let half_max = NonZeroU32::new(u32::MAX / 2)?;

assert_eq!(Some(twenty_seven), three.checked_pow(3));
assert_eq!(None, half_max.checked_pow(3));

pub const fn saturating_pow(self, other: u32) -> NonZeroU32

Raise non-zero value to an integer power. Return u32::MAX on overflow.

Examples

let three = NonZeroU32::new(3)?;
let twenty_seven = NonZeroU32::new(27)?;
let max = NonZeroU32::new(u32::MAX)?;

assert_eq!(twenty_seven, three.saturating_pow(3));
assert_eq!(max, max.saturating_pow(3));

impl NonZeroU32

pub const fn is_power_of_two(self) -> bool

Returns true if and only if self == (1 << k) for some k.

On many architectures, this function can perform better than is_power_of_two() on the underlying integer type, as special handling of zero can be avoided.

Examples

Basic usage:

let eight = std::num::NonZeroU32::new(8).unwrap();
assert!(eight.is_power_of_two());
let ten = std::num::NonZeroU32::new(10).unwrap();
assert!(!ten.is_power_of_two());

impl NonZeroU32

pub const MIN: Self = _

The smallest value that can be represented by this non-zero integer type, 1.

Examples

assert_eq!(NonZeroU32::MIN.get(), 1u32);

pub const MAX: Self = _

The largest value that can be represented by this non-zero integer type, equal to u32::MAX.

Examples

assert_eq!(NonZeroU32::MAX.get(), u32::MAX);

impl NonZeroU32

pub const BITS: u32 = 32u32

The size of this non-zero integer type in bits.

This value is equal to u32::BITS.

Examples

assert_eq!(NonZeroU32::BITS, u32::BITS);

Trait Implementations

impl Binary for NonZeroU32

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitOr<NonZeroU32> for NonZeroU32

type Output = NonZeroU32

The resulting type after applying the | operator.

fn bitor(self, rhs: Self) -> Self::Output

Performs the | operation.

impl BitOr<NonZeroU32> for u32

type Output = NonZeroU32

The resulting type after applying the | operator.

fn bitor(self, rhs: NonZeroU32) -> Self::Output

Performs the | operation.

impl BitOr<u32> for NonZeroU32

type Output = NonZeroU32

The resulting type after applying the | operator.

fn bitor(self, rhs: u32) -> Self::Output

Performs the | operation.

impl BitOrAssign<NonZeroU32> for NonZeroU32

fn bitor_assign(&mut self, rhs: Self)

Performs the |= operation.

impl BitOrAssign<u32> for NonZeroU32

fn bitor_assign(&mut self, rhs: u32)

Performs the |= operation.

impl Clone for NonZeroU32

fn clone(&self) -> NonZeroU32

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for NonZeroU32

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for NonZeroU32

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Div<NonZeroU32> for u32

fn div(self, other: NonZeroU32) -> u32

This operation rounds towards zero, truncating any fractional part of the exact result, and cannot panic.

type Output = u32

The resulting type after applying the / operator.

impl From<NonZeroU16> for NonZeroU32

fn from(small: NonZeroU16) -> Self

Converts NonZeroU16 to NonZeroU32 losslessly.

impl From<NonZeroU32> for NonZeroI128

fn from(small: NonZeroU32) -> Self

Converts NonZeroU32 to NonZeroI128 losslessly.

impl From<NonZeroU32> for NonZeroI64

fn from(small: NonZeroU32) -> Self

Converts NonZeroU32 to NonZeroI64 losslessly.

impl From<NonZeroU32> for NonZeroU128

fn from(small: NonZeroU32) -> Self

Converts NonZeroU32 to NonZeroU128 losslessly.

impl From<NonZeroU32> for NonZeroU64

fn from(small: NonZeroU32) -> Self

Converts NonZeroU32 to NonZeroU64 losslessly.

impl From<NonZeroU32> for u32

fn from(nonzero: NonZeroU32) -> Self

Converts a NonZeroU32 into an u32

impl From<NonZeroU8> for NonZeroU32

fn from(small: NonZeroU8) -> Self

Converts NonZeroU8 to NonZeroU32 losslessly.

impl FromStr for NonZeroU32

type Err = ParseIntError

The associated error which can be returned from parsing.

fn from_str(src: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl Hash for NonZeroU32

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H: Hasher>(data: &[Self], state: &mut H)where Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for NonZeroU32

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Octal for NonZeroU32

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for NonZeroU32

fn cmp(&self, other: &NonZeroU32) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<NonZeroU32> for NonZeroU32

fn eq(&self, other: &NonZeroU32) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<NonZeroU32> for NonZeroU32

fn partial_cmp(&self, other: &NonZeroU32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Rem<NonZeroU32> for u32

fn rem(self, other: NonZeroU32) -> u32

This operation satisfies n % d == n - (n / d) * d, and cannot panic.

type Output = u32

The resulting type after applying the % operator.

impl TryFrom<NonZeroI128> for NonZeroU32

fn try_from(value: NonZeroI128) -> Result<Self, Self::Error>

Attempts to convert NonZeroI128 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroI16> for NonZeroU32

fn try_from(value: NonZeroI16) -> Result<Self, Self::Error>

Attempts to convert NonZeroI16 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroI32> for NonZeroU32

fn try_from(value: NonZeroI32) -> Result<Self, Self::Error>

Attempts to convert NonZeroI32 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroI64> for NonZeroU32

fn try_from(value: NonZeroI64) -> Result<Self, Self::Error>

Attempts to convert NonZeroI64 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroI8> for NonZeroU32

fn try_from(value: NonZeroI8) -> Result<Self, Self::Error>

Attempts to convert NonZeroI8 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroIsize> for NonZeroU32

fn try_from(value: NonZeroIsize) -> Result<Self, Self::Error>

Attempts to convert NonZeroIsize to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU128> for NonZeroU32

fn try_from(value: NonZeroU128) -> Result<Self, Self::Error>

Attempts to convert NonZeroU128 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroI16

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroI16.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroI32

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroI32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroI8

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroI8.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroIsize

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroIsize.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroU16

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroU16.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroU8

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroU8.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU32> for NonZeroUsize

fn try_from(value: NonZeroU32) -> Result<Self, Self::Error>

Attempts to convert NonZeroU32 to NonZeroUsize.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroU64> for NonZeroU32

fn try_from(value: NonZeroU64) -> Result<Self, Self::Error>

Attempts to convert NonZeroU64 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<NonZeroUsize> for NonZeroU32

fn try_from(value: NonZeroUsize) -> Result<Self, Self::Error>

Attempts to convert NonZeroUsize to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl TryFrom<u32> for NonZeroU32

fn try_from(value: u32) -> Result<Self, Self::Error>

Attempts to convert u32 to NonZeroU32.

type Error = TryFromIntError

The type returned in the event of a conversion error.

impl UpperHex for NonZeroU32

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for NonZeroU32

impl Eq for NonZeroU32

impl StructuralEq for NonZeroU32

impl StructuralPartialEq for NonZeroU32