Every variable, item and value in a Rust program has a type. The type of a value defines the interpretation of the memory holding it.

Built-in types and type-constructors are tightly integrated into the language, in nontrivial ways that are not possible to emulate in user-defined types. User-defined types have limited capabilities.

Primitive types

The primitive types are the following:

  • The boolean type bool with values true and false.
  • The machine types (integer and floating-point).
  • The machine-dependent integer types.
  • Arrays
  • Tuples
  • Slices
  • Function pointers

Machine types

The machine types are the following:

  • The unsigned word types u8, u16, u32 and u64, with values drawn from the integer intervals [0, 2^8 - 1], [0, 2^16 - 1], [0, 2^32 - 1] and [0, 2^64 - 1] respectively.

  • The signed two's complement word types i8, i16, i32 and i64, with values drawn from the integer intervals [-(2^(7)), 2^7 - 1], [-(2^(15)), 2^15 - 1], [-(2^(31)), 2^31 - 1], [-(2^(63)), 2^63 - 1] respectively.

  • The IEEE 754-2008 binary32 and binary64 floating-point types: f32 and f64, respectively.

Machine-dependent integer types

The usize type is an unsigned integer type with the same number of bits as the platform's pointer type. It can represent every memory address in the process.

The isize type is a signed integer type with the same number of bits as the platform's pointer type. The theoretical upper bound on object and array size is the maximum isize value. This ensures that isize can be used to calculate differences between pointers into an object or array and can address every byte within an object along with one byte past the end.

Textual types

The types char and str hold textual data.

A value of type char is a Unicode scalar value (i.e. a code point that is not a surrogate), represented as a 32-bit unsigned word in the 0x0000 to 0xD7FF or 0xE000 to 0x10FFFF range. A [char] array is effectively an UCS-4 / UTF-32 string.

A value of type str is a Unicode string, represented as an array of 8-bit unsigned bytes holding a sequence of UTF-8 code points. Since str is of unknown size, it is not a first-class type, but can only be instantiated through a pointer type, such as &str.

Tuple types

A tuple type is a heterogeneous product of other types, called the elements of the tuple. It has no nominal name and is instead structurally typed.

Tuple types and values are denoted by listing the types or values of their elements, respectively, in a parenthesized, comma-separated list.

Because tuple elements don't have a name, they can only be accessed by pattern-matching or by using N directly as a field to access the Nth element.

An example of a tuple type and its use:

type Pair<'a> = (i32, &'a str);
let p: Pair<'static> = (10, "ten");
let (a, b) = p;

assert_eq!(a, 10);
assert_eq!(b, "ten");
assert_eq!(p.0, 10);
assert_eq!(p.1, "ten");

For historical reasons and convenience, the tuple type with no elements (()) is often called ‘unit’ or ‘the unit type’.

Array, and Slice types

Rust has two different types for a list of items:

  • [T; N], an 'array'
  • &[T], a 'slice'

An array has a fixed size, and can be allocated on either the stack or the heap.

A slice is a 'view' into an array. It doesn't own the data it points to, it borrows it.


// A stack-allocated array
let array: [i32; 3] = [1, 2, 3];

// A heap-allocated array
let vector: Vec<i32> = vec![1, 2, 3];

// A slice into an array
let slice: &[i32] = &vector[..];

As you can see, the vec! macro allows you to create a Vec<T> easily. The vec! macro is also part of the standard library, rather than the language.

All in-bounds elements of arrays and slices are always initialized, and access to an array or slice is always bounds-checked.

Struct types

A struct type is a heterogeneous product of other types, called the fields of the type.1


struct types are analogous to struct types in C, the record types of the ML family, or the struct types of the Lisp family.

New instances of a struct can be constructed with a struct expression.

The memory layout of a struct is undefined by default to allow for compiler optimizations like field reordering, but it can be fixed with the #[repr(...)] attribute. In either case, fields may be given in any order in a corresponding struct expression; the resulting struct value will always have the same memory layout.

The fields of a struct may be qualified by visibility modifiers, to allow access to data in a struct outside a module.

A tuple struct type is just like a struct type, except that the fields are anonymous.

A unit-like struct type is like a struct type, except that it has no fields. The one value constructed by the associated struct expression is the only value that inhabits such a type.

Enumerated types

An enumerated type is a nominal, heterogeneous disjoint union type, denoted by the name of an enum item. 2


The enum type is analogous to a data constructor declaration in ML, or a pick ADT in Limbo.

An enum item declares both the type and a number of variant constructors, each of which is independently named and takes an optional tuple of arguments.

New instances of an enum can be constructed by calling one of the variant constructors, in a call expression.

Any enum value consumes as much memory as the largest variant constructor for its corresponding enum type.

Enum types cannot be denoted structurally as types, but must be denoted by named reference to an enum item.

Recursive types

Nominal types — enumerations and structs — may be recursive. That is, each enum constructor or struct field may refer, directly or indirectly, to the enclosing enum or struct type itself. Such recursion has restrictions:

  • Recursive types must include a nominal type in the recursion (not mere type definitions, or other structural types such as arrays or tuples).
  • A recursive enum item must have at least one non-recursive constructor (in order to give the recursion a basis case).
  • The size of a recursive type must be finite; in other words the recursive fields of the type must be pointer types.
  • Recursive type definitions can cross module boundaries, but not module visibility boundaries, or crate boundaries (in order to simplify the module system and type checker).

An example of a recursive type and its use:

enum List<T> {
    Cons(T, Box<List<T>>)

let a: List<i32> = List::Cons(7, Box::new(List::Cons(13, Box::new(List::Nil))));

Pointer types

All pointers in Rust are explicit first-class values. They can be copied, stored into data structs, and returned from functions. There are two varieties of pointer in Rust:

  • References (&) : These point to memory owned by some other value. A reference type is written &type, or &'a type when you need to specify an explicit lifetime. Copying a reference is a "shallow" operation: it involves only copying the pointer itself. Releasing a reference has no effect on the value it points to, but a reference of a temporary value will keep it alive during the scope of the reference itself.

  • Raw pointers (*) : Raw pointers are pointers without safety or liveness guarantees. Raw pointers are written as *const T or *mut T, for example *const i32 means a raw pointer to a 32-bit integer. Copying or dropping a raw pointer has no effect on the lifecycle of any other value. Dereferencing a raw pointer or converting it to any other pointer type is an unsafe operation. Raw pointers are generally discouraged in Rust code; they exist to support interoperability with foreign code, and writing performance-critical or low-level functions.

The standard library contains additional 'smart pointer' types beyond references and raw pointers.

Function types

The function type constructor fn forms new function types. A function type consists of a possibly-empty set of function-type modifiers (such as unsafe or extern), a sequence of input types and an output type.

An example of a fn type:

fn add(x: i32, y: i32) -> i32 {
    x + y

let mut x = add(5,7);

type Binop = fn(i32, i32) -> i32;
let bo: Binop = add;
x = bo(5,7);

Function types for specific items

Internal to the compiler, there are also function types that are specific to a particular function item. In the following snippet, for example, the internal types of the functions foo and bar are different, despite the fact that they have the same signature:

fn foo() { }
fn bar() { }

The types of foo and bar can both be implicitly coerced to the fn pointer type fn(). There is currently no syntax for unique fn types, though the compiler will emit a type like fn() {foo} in error messages to indicate "the unique fn type for the function foo".

Closure types

A lambda expression produces a closure value with a unique, anonymous type that cannot be written out.

Depending on the requirements of the closure, its type implements one or more of the closure traits:

  • FnOnce : The closure can be called once. A closure called as FnOnce can move out values from its environment.

  • FnMut : The closure can be called multiple times as mutable. A closure called as FnMut can mutate values from its environment. FnMut inherits from FnOnce (i.e. anything implementing FnMut also implements FnOnce).

  • Fn : The closure can be called multiple times through a shared reference. A closure called as Fn can neither move out from nor mutate values from its environment. Fn inherits from FnMut, which itself inherits from FnOnce.

Trait objects

In Rust, a type like &SomeTrait or Box<SomeTrait> is called a trait object. Each instance of a trait object includes:

  • a pointer to an instance of a type T that implements SomeTrait
  • a virtual method table, often just called a vtable, which contains, for each method of SomeTrait that T implements, a pointer to T's implementation (i.e. a function pointer).

The purpose of trait objects is to permit "late binding" of methods. Calling a method on a trait object results in virtual dispatch at runtime: that is, a function pointer is loaded from the trait object vtable and invoked indirectly. The actual implementation for each vtable entry can vary on an object-by-object basis.

Note that for a trait object to be instantiated, the trait must be object-safe. Object safety rules are defined in RFC 255.

Given a pointer-typed expression E of type &T or Box<T>, where T implements trait R, casting E to the corresponding pointer type &R or Box<R> results in a value of the trait object R. This result is represented as a pair of pointers: the vtable pointer for the T implementation of R, and the pointer value of E.

An example of a trait object:

trait Printable {
    fn stringify(&self) -> String;

impl Printable for i32 {
    fn stringify(&self) -> String { self.to_string() }

fn print(a: Box<Printable>) {
    println!("{}", a.stringify());

fn main() {
    print(Box::new(10) as Box<Printable>);

In this example, the trait Printable occurs as a trait object in both the type signature of print, and the cast expression in main.

Type parameters

Within the body of an item that has type parameter declarations, the names of its type parameters are types:

fn to_vec<A: Clone>(xs: &[A]) -> Vec<A> {
    if xs.is_empty() {
        return vec![];
    let first: A = xs[0].clone();
    let mut rest: Vec<A> = to_vec(&xs[1..]);
    rest.insert(0, first);

Here, first has type A, referring to to_vec's A type parameter; and rest has type Vec<A>, a vector with element type A.

Self types

The special type Self has a meaning within traits and impls. In a trait definition, it refers to an implicit type parameter representing the "implementing" type. In an impl, it is an alias for the implementing type. For example, in:

pub trait From<T> {
    fn from(T) -> Self;

impl From<i32> for String {
    fn from(x: i32) -> Self {

The notation Self in the impl refers to the implementing type: String. In another example:

trait Printable {
    fn make_string(&self) -> String;

impl Printable for String {
    fn make_string(&self) -> String {

The notation &self is a shorthand for self: &Self. In this case, in the impl, Self refers to the value of type String that is the receiver for a call to the method make_string.