# Items

An item is a component of a crate. Items are organized within a crate by a nested set of modules. Every crate has a single "outermost" anonymous module; all further items within the crate have paths within the module tree of the crate.

Items are entirely determined at compile-time, generally remain fixed during execution, and may reside in read-only memory.

There are several kinds of item:

Some items form an implicit scope for the declaration of sub-items. In other words, within a function or module, declarations of items can (in many cases) be mixed with the statements, control blocks, and similar artifacts that otherwise compose the item body. The meaning of these scoped items is the same as if the item was declared outside the scope — it is still a static item — except that the item's path name within the module namespace is qualified by the name of the enclosing item, or is private to the enclosing item (in the case of functions). The grammar specifies the exact locations in which sub-item declarations may appear.

## Type Parameters

All items except modules, constants and statics may be parameterized by type. Type parameters are given as a comma-separated list of identifiers enclosed in angle brackets (<...>), after the name of the item and before its definition. The type parameters of an item are considered "part of the name", not part of the type of the item. A referencing path must (in principle) provide type arguments as a list of comma-separated types enclosed within angle brackets, in order to refer to the type-parameterized item. In practice, the type-inference system can usually infer such argument types from context. There are no general type-parametric types, only type-parametric items. That is, Rust has no notion of type abstraction: there are no higher-ranked (or "forall") types abstracted over other types, though higher-ranked types do exist for lifetimes.

## Modules

A module is a container for zero or more items.

A module item is a module, surrounded in braces, named, and prefixed with the keyword mod. A module item introduces a new, named module into the tree of modules making up a crate. Modules can nest arbitrarily.

An example of a module:

# #![allow(unused_variables)]
#
#fn main() {
mod math {
type Complex = (f64, f64);
fn sin(f: f64) -> f64 {
/* ... */
# panic!();
}
fn cos(f: f64) -> f64 {
/* ... */
# panic!();
}
fn tan(f: f64) -> f64 {
/* ... */
# panic!();
}
}

#}

Modules and types share the same namespace. Declaring a named type with the same name as a module in scope is forbidden: that is, a type definition, trait, struct, enumeration, or type parameter can't shadow the name of a module in scope, or vice versa.

A module without a body is loaded from an external file, by default with the same name as the module, plus the .rs extension. When a nested submodule is loaded from an external file, it is loaded from a subdirectory path that mirrors the module hierarchy.

// Load the vec module from vec.rs
mod vec;

// Load the local_data module from thread/local_data.rs
// or thread/local_data/mod.rs.
mod local_data;
}


The directories and files used for loading external file modules can be influenced with the path attribute.

#[path = "thread_files"]
// Load the local_data module from thread_files/tls.rs
#[path = "tls.rs"]
mod local_data;
}


### Extern crate declarations

An extern crate declaration specifies a dependency on an external crate. The external crate is then bound into the declaring scope as the ident provided in the extern_crate_decl.

The external crate is resolved to a specific soname at compile time, and a runtime linkage requirement to that soname is passed to the linker for loading at runtime. The soname is resolved at compile time by scanning the compiler's library path and matching the optional crateid provided against the crateid attributes that were declared on the external crate when it was compiled. If no crateid is provided, a default name attribute is assumed, equal to the ident given in the extern_crate_decl.

Three examples of extern crate declarations:

extern crate pcre;

extern crate std; // equivalent to: extern crate std as std;

extern crate std as ruststd; // linking to 'std' under another name


When naming Rust crates, hyphens are disallowed. However, Cargo packages may make use of them. In such case, when Cargo.toml doesn't specify a crate name, Cargo will transparently replace - with _ (Refer to RFC 940 for more details).

Here is an example:

// Importing the Cargo package hello-world
extern crate hello_world; // hyphen replaced with an underscore


### Use declarations

A use declaration creates one or more local name bindings synonymous with some other path. Usually a use declaration is used to shorten the path required to refer to a module item. These declarations may appear in modules and blocks, usually at the top.

Note: Unlike in many languages, use declarations in Rust do not declare linkage dependency with external crates. Rather, extern crate declarations declare linkage dependencies.

Use declarations support a number of convenient shortcuts:

• Rebinding the target name as a new local name, using the syntax use p::q::r as x;
• Simultaneously binding a list of paths differing only in their final element, using the glob-like brace syntax use a::b::{c,d,e,f};
• Binding all paths matching a given prefix, using the asterisk wildcard syntax use a::b::*;
• Simultaneously binding a list of paths differing only in their final element and their immediate parent module, using the self keyword, such as use a::b::{self, c, d};

An example of use declarations:

use std::option::Option::{Some, None};
use std::collections::hash_map::{self, HashMap};

fn foo<T>(_: T){}
fn bar(map1: HashMap<String, usize>, map2: hash_map::HashMap<String, usize>){}

fn main() {
// Equivalent to 'foo(vec![std::option::Option::Some(1.0f64),
// std::option::Option::None]);'
foo(vec![Some(1.0f64), None]);

// Both hash_map and HashMap are in scope.
let map1 = HashMap::new();
let map2 = hash_map::HashMap::new();
bar(map1, map2);
}


Like items, use declarations are private to the containing module, by default. Also like items, a use declaration can be public, if qualified by the pub keyword. Such a use declaration serves to re-export a name. A public use declaration can therefore redirect some public name to a different target definition: even a definition with a private canonical path, inside a different module. If a sequence of such redirections form a cycle or cannot be resolved unambiguously, they represent a compile-time error.

An example of re-exporting:

# fn main() { }
mod quux {
pub use quux::foo::{bar, baz};

pub mod foo {
pub fn bar() { }
pub fn baz() { }
}
}


In this example, the module quux re-exports two public names defined in foo.

Also note that the paths contained in use items are relative to the crate root. So, in the previous example, the use refers to quux::foo::{bar, baz}, and not simply to foo::{bar, baz}. This also means that top-level module declarations should be at the crate root if direct usage of the declared modules within use items is desired. It is also possible to use self and super at the beginning of a use item to refer to the current and direct parent modules respectively. All rules regarding accessing declared modules in use declarations apply to both module declarations and extern crate declarations.

An example of what will and will not work for use items:

# #![allow(unused_imports)]
use foo::baz::foobaz;    // good: foo is at the root of the crate

mod foo {

mod example {
pub mod iter {}
}

use foo::example::iter; // good: foo is at crate root
//  use example::iter;      // bad:  example is not at the crate root
use self::baz::foobaz;  // good: self refers to module 'foo'
use foo::bar::foobar;   // good: foo is at crate root

pub mod bar {
pub fn foobar() { }
}

pub mod baz {
use super::bar::foobar; // good: super refers to module 'foo'
pub fn foobaz() { }
}
}

fn main() {}


## Functions

A function item defines a sequence of statements and a final expression, along with a name and a set of parameters. Other than a name, all these are optional. Functions are declared with the keyword fn. Functions may declare a set of input variables as parameters, through which the caller passes arguments into the function, and the output type of the value the function will return to its caller on completion.

A function may also be copied into a first-class value, in which case the value has the corresponding function type, and can be used otherwise exactly as a function item (with a minor additional cost of calling the function indirectly).

Every control path in a function logically ends with a return expression or a diverging expression. If the outermost block of a function has a value-producing expression in its final-expression position, that expression is interpreted as an implicit return expression applied to the final-expression.

An example of a function:

# #![allow(unused_variables)]
#
#fn main() {
fn add(x: i32, y: i32) -> i32 {
x + y
}

#}

As with let bindings, function arguments are irrefutable patterns, so any pattern that is valid in a let binding is also valid as an argument.

# #![allow(unused_variables)]
#
#fn main() {
fn first((value, _): (i32, i32)) -> i32 { value }

#}

### Generic functions

A generic function allows one or more parameterized types to appear in its signature. Each type parameter must be explicitly declared in an angle-bracket-enclosed and comma-separated list, following the function name.

// foo is generic over A and B

fn foo<A, B>(x: A, y: B) {


Inside the function signature and body, the name of the type parameter can be used as a type name. Trait bounds can be specified for type parameters to allow methods with that trait to be called on values of that type. This is specified using the where syntax:

fn foo<T>(x: T) where T: Debug {


When a generic function is referenced, its type is instantiated based on the context of the reference. For example, calling the foo function here:

# #![allow(unused_variables)]
#
#fn main() {
use std::fmt::Debug;

fn foo<T>(x: &[T]) where T: Debug {
// details elided
# ()
}

foo(&[1, 2]);

#}

will instantiate type parameter T with i32.

The type parameters can also be explicitly supplied in a trailing path component after the function name. This might be necessary if there is not sufficient context to determine the type parameters. For example, mem::size_of::<u32>() == 4.

### Diverging functions

A special kind of function can be declared with a ! character where the output type would normally be. For example:

# #![allow(unused_variables)]
#
#fn main() {
fn my_err(s: &str) -> ! {
println!("{}", s);
panic!();
}

#}

We call such functions "diverging" because they never return a value to the caller. Every control path in a diverging function must end with a panic!() or a call to another diverging function on every control path. The ! annotation does not denote a type.

It might be necessary to declare a diverging function because as mentioned previously, the typechecker checks that every control path in a function ends with a return or diverging expression. So, if my_err were declared without the ! annotation, the following code would not typecheck:

# #![allow(unused_variables)]
#
#fn main() {
# fn my_err(s: &str) -> ! { panic!() }

fn f(i: i32) -> i32 {
if i == 42 {
return 42;
}
else {
}
}

#}

This will not compile without the ! annotation on my_err, since the else branch of the conditional in f does not return an i32, as required by the signature of f. Adding the ! annotation to my_err informs the typechecker that, should control ever enter my_err, no further type judgments about f need to hold, since control will never resume in any context that relies on those judgments. Thus the return type on f only needs to reflect the if branch of the conditional.

### Extern functions

Extern functions are part of Rust's foreign function interface, providing the opposite functionality to external blocks. Whereas external blocks allow Rust code to call foreign code, extern functions with bodies defined in Rust code can be called by foreign code. They are defined in the same way as any other Rust function, except that they have the extern modifier.

# #![allow(unused_variables)]
#
#fn main() {
// Declares an extern fn, the ABI defaults to "C"
extern fn new_i32() -> i32 { 0 }

// Declares an extern fn with "stdcall" ABI
extern "stdcall" fn new_i32_stdcall() -> i32 { 0 }

#}

Unlike normal functions, extern fns have type extern "ABI" fn(). This is the same type as the functions declared in an extern block.

# #![allow(unused_variables)]
#
#fn main() {
# extern fn new_i32() -> i32 { 0 }
let fptr: extern "C" fn() -> i32 = new_i32;

#}

Extern functions may be called directly from Rust code as Rust uses large, contiguous stack segments like C.

## Type aliases

A type alias defines a new name for an existing type. Type aliases are declared with the keyword type. Every value has a single, specific type, but may implement several different traits, or be compatible with several different type constraints.

For example, the following defines the type Point as a synonym for the type (u8, u8), the type of pairs of unsigned 8 bit integers:

# #![allow(unused_variables)]
#
#fn main() {
type Point = (u8, u8);
let p: Point = (41, 68);

#}

Currently a type alias to an enum type cannot be used to qualify the constructors:

# #![allow(unused_variables)]
#
#fn main() {
enum E { A }
type F = E;
let _: F = E::A;  // OK
// let _: F = F::A;  // Doesn't work

#}

## Structs

A struct is a nominal struct type defined with the keyword struct.

An example of a struct item and its use:

# #![allow(unused_variables)]
#
#fn main() {
struct Point {x: i32, y: i32}
let p = Point {x: 10, y: 11};
let px: i32 = p.x;

#}

A tuple struct is a nominal tuple type, also defined with the keyword struct. For example:

# #![allow(unused_variables)]
#
#fn main() {
struct Point(i32, i32);
let p = Point(10, 11);
let px: i32 = match p { Point(x, _) => x };

#}

A unit-like struct is a struct without any fields, defined by leaving off the list of fields entirely. Such a struct implicitly defines a constant of its type with the same name. For example:

# #![allow(unused_variables)]
#
#fn main() {

#}

is equivalent to

# #![allow(unused_variables)]
#
#fn main() {

#}

The precise memory layout of a struct is not specified. One can specify a particular layout using the repr attribute.

## Enumerations

An enumeration is a simultaneous definition of a nominal enumerated type as well as a set of constructors, that can be used to create or pattern-match values of the corresponding enumerated type.

Enumerations are declared with the keyword enum.

An example of an enum item and its use:

# #![allow(unused_variables)]
#
#fn main() {
enum Animal {
Dog,
Cat,
}

let mut a: Animal = Animal::Dog;
a = Animal::Cat;

#}

Enumeration constructors can have either named or unnamed fields:

# #![allow(unused_variables)]
#
#fn main() {
enum Animal {
Dog (String, f64),
Cat { name: String, weight: f64 },
}

let mut a: Animal = Animal::Dog("Cocoa".to_string(), 37.2);
a = Animal::Cat { name: "Spotty".to_string(), weight: 2.7 };

#}

In this example, Cat is a struct-like enum variant, whereas Dog is simply called an enum variant.

Each enum value has a discriminant which is an integer associated to it. You can specify it explicitly:

# #![allow(unused_variables)]
#
#fn main() {
enum Foo {
Bar = 123,
}

#}

The right hand side of the specification is interpreted as an isize value, but the compiler is allowed to use a smaller type in the actual memory layout. The repr attribute can be added in order to change the type of the right hand side and specify the memory layout.

If a discriminant isn't specified, they start at zero, and add one for each variant, in order.

You can cast an enum to get its discriminant:

# #![allow(unused_variables)]
#
#fn main() {
# enum Foo { Bar = 123 }
let x = Foo::Bar as u32; // x is now 123u32

#}

This only works as long as none of the variants have data attached. If it were Bar(i32), this is disallowed.

## Constant items

A constant item is a named constant value which is not associated with a specific memory location in the program. Constants are essentially inlined wherever they are used, meaning that they are copied directly into the relevant context when used. References to the same constant are not necessarily guaranteed to refer to the same memory address.

Constant values must not have destructors, and otherwise permit most forms of data. Constants may refer to the address of other constants, in which case the address will have elided lifetimes where applicable, otherwise – in most cases – defaulting to the static lifetime. (See below on static lifetime elision.) The compiler is, however, still at liberty to translate the constant many times, so the address referred to may not be stable.

Constants must be explicitly typed. The type may be bool, char, a number, or a type derived from those primitive types. The derived types are references with the static lifetime, fixed-size arrays, tuples, enum variants, and structs.

# #![allow(unused_variables)]
#
#fn main() {
const BIT1: u32 = 1 << 0;
const BIT2: u32 = 1 << 1;

const BITS: [u32; 2] = [BIT1, BIT2];
const STRING: &'static str = "bitstring";

struct BitsNStrings<'a> {
mybits: [u32; 2],
mystring: &'a str,
}

const BITS_N_STRINGS: BitsNStrings<'static> = BitsNStrings {
mybits: BITS,
mystring: STRING,
};

#}

## Static items

A static item is similar to a constant, except that it represents a precise memory location in the program. A static is never "inlined" at the usage site, and all references to it refer to the same memory location. Static items have the static lifetime, which outlives all other lifetimes in a Rust program. Static items may be placed in read-only memory if they do not contain any interior mutability.

Statics may contain interior mutability through the UnsafeCell language item. All access to a static is safe, but there are a number of restrictions on statics:

• Statics may not contain any destructors.
• The types of static values must ascribe to Sync to allow thread-safe access.
• Statics may not refer to other statics by value, only by reference.
• Constants cannot refer to statics.

Constants should in general be preferred over statics, unless large amounts of data are being stored, or single-address and mutability properties are required.

### Mutable statics

If a static item is declared with the mut keyword, then it is allowed to be modified by the program. One of Rust's goals is to make concurrency bugs hard to run into, and this is obviously a very large source of race conditions or other bugs. For this reason, an unsafe block is required when either reading or writing a mutable static variable. Care should be taken to ensure that modifications to a mutable static are safe with respect to other threads running in the same process.

Mutable statics are still very useful, however. They can be used with C libraries and can also be bound from C libraries (in an extern block).

# #![allow(unused_variables)]
#
#fn main() {
# fn atomic_add(_: &mut u32, _: u32) -> u32 { 2 }

static mut LEVELS: u32 = 0;

// This violates the idea of no shared state, and this doesn't internally
// protect against races, so this function is unsafe
unsafe fn bump_levels_unsafe1() -> u32 {
let ret = LEVELS;
LEVELS += 1;
return ret;
}

// Assuming that we have an atomic_add function which returns the old value,
// this function is "safe" but the meaning of the return value may not be what
// callers expect, so it's still marked as unsafe
unsafe fn bump_levels_unsafe2() -> u32 {
}

#}

Mutable statics have the same restrictions as normal statics, except that the type of the value is not required to ascribe to Sync.

#### 'static lifetime elision

[Unstable] Both constant and static declarations of reference types have implicit 'static lifetimes unless an explicit lifetime is specified. As such, the constant declarations involving 'static above may be written without the lifetimes. Returning to our previous example:

# #![allow(unused_variables)]
#
#fn main() {
# #![feature(static_in_const)]
const BIT1: u32 = 1 << 0;
const BIT2: u32 = 1 << 1;

const BITS: [u32; 2] = [BIT1, BIT2];
const STRING: &str = "bitstring";

struct BitsNStrings<'a> {
mybits: [u32; 2],
mystring: &'a str,
}

const BITS_N_STRINGS: BitsNStrings = BitsNStrings {
mybits: BITS,
mystring: STRING,
};

#}

Note that if the static or const items include function or closure references, which themselves include references, the compiler will first try the standard elision rules (see discussion in the nomicon). If it is unable to resolve the lifetimes by its usual rules, it will default to using the 'static lifetime. By way of example:

// Resolved as fn<'a>(&'a str) -> &'a str.
const RESOLVED_SINGLE: fn(&str) -> &str = ..

// Resolved as Fn<'a, 'b, 'c>(&'a Foo, &'b Bar, &'c Baz) -> usize.
const RESOLVED_MULTIPLE: Fn(&Foo, &Bar, &Baz) -> usize = ..

// There is insufficient information to bound the return reference lifetime
// relative to the argument lifetimes, so the signature is resolved as
// Fn(&'static Foo, &'static Bar) -> &'static Baz.
const RESOLVED_STATIC: Fn(&Foo, &Bar) -> &Baz = ..


### Traits

A trait describes an abstract interface that types can implement. This interface consists of associated items, which come in three varieties:

• functions
• constants
• types

Associated functions whose first parameter is named self are called methods and may be invoked using . notation (e.g., x.foo()).

All traits define an implicit type parameter Self that refers to "the type that is implementing this interface". Traits may also contain additional type parameters. These type parameters (including Self) may be constrained by other traits and so forth as usual.

Trait bounds on Self are considered "supertraits". These are required to be acyclic. Supertraits are somewhat different from other constraints in that they affect what methods are available in the vtable when the trait is used as a trait object.

Traits are implemented for specific types through separate implementations.

Consider the following trait:

# #![allow(unused_variables)]
#
#fn main() {
# type Surface = i32;
# type BoundingBox = i32;
trait Shape {
fn draw(&self, Surface);
fn bounding_box(&self) -> BoundingBox;
}

#}

This defines a trait with two methods. All values that have implementations of this trait in scope can have their draw and bounding_box methods called, using value.bounding_box() syntax.

Traits can include default implementations of methods, as in:

# #![allow(unused_variables)]
#
#fn main() {
trait Foo {
fn bar(&self);
fn baz(&self) { println!("We called baz."); }
}

#}

Here the baz method has a default implementation, so types that implement Foo need only implement bar. It is also possible for implementing types to override a method that has a default implementation.

Type parameters can be specified for a trait to make it generic. These appear after the trait name, using the same syntax used in generic functions.

# #![allow(unused_variables)]
#
#fn main() {
trait Seq<T> {
fn len(&self) -> u32;
fn elt_at(&self, n: u32) -> T;
fn iter<F>(&self, F) where F: Fn(T);
}

#}

It is also possible to define associated types for a trait. Consider the following example of a Container trait. Notice how the type is available for use in the method signatures:

# #![allow(unused_variables)]
#
#fn main() {
trait Container {
type E;
fn empty() -> Self;
fn insert(&mut self, Self::E);
}

#}

In order for a type to implement this trait, it must not only provide implementations for every method, but it must specify the type E. Here's an implementation of Container for the standard library type Vec:

# #![allow(unused_variables)]
#
#fn main() {
# trait Container {
#     type E;
#     fn empty() -> Self;
#     fn insert(&mut self, Self::E);
# }
impl<T> Container for Vec<T> {
type E = T;
fn empty() -> Vec<T> { Vec::new() }
fn insert(&mut self, x: T) { self.push(x); }
}

#}

Generic functions may use traits as bounds on their type parameters. This will have two effects:

• Only types that have the trait may instantiate the parameter.
• Within the generic function, the methods of the trait can be called on values that have the parameter's type.

For example:

# #![allow(unused_variables)]
#
#fn main() {
# type Surface = i32;
# trait Shape { fn draw(&self, Surface); }
fn draw_twice<T: Shape>(surface: Surface, sh: T) {
sh.draw(surface);
sh.draw(surface);
}

#}

Traits also define a trait object with the same name as the trait. Values of this type are created by coercing from a pointer of some specific type to a pointer of trait type. For example, &T could be coerced to &Shape if T: Shape holds (and similarly for Box<T>). This coercion can either be implicit or explicit. Here is an example of an explicit coercion:

# #![allow(unused_variables)]
#
#fn main() {
trait Shape { }
impl Shape for i32 { }
let mycircle = 0i32;
let myshape: Box<Shape> = Box::new(mycircle) as Box<Shape>;

#}

The resulting value is a box containing the value that was cast, along with information that identifies the methods of the implementation that was used. Values with a trait type can have methods called on them, for any method in the trait, and can be used to instantiate type parameters that are bounded by the trait.

Trait methods may be static, which means that they lack a self argument. This means that they can only be called with function call syntax (f(x)) and not method call syntax (obj.f()). The way to refer to the name of a static method is to qualify it with the trait name, treating the trait name like a module. For example:

# #![allow(unused_variables)]
#
#fn main() {
trait Num {
fn from_i32(n: i32) -> Self;
}
impl Num for f64 {
fn from_i32(n: i32) -> f64 { n as f64 }
}
let x: f64 = Num::from_i32(42);

#}

Traits may inherit from other traits. Consider the following example:

# #![allow(unused_variables)]
#
#fn main() {
trait Shape { fn area(&self) -> f64; }
trait Circle : Shape { fn radius(&self) -> f64; }

#}

The syntax Circle : Shape means that types that implement Circle must also have an implementation for Shape. Multiple supertraits are separated by +, trait Circle : Shape + PartialEq { }. In an implementation of Circle for a given type T, methods can refer to Shape methods, since the typechecker checks that any type with an implementation of Circle also has an implementation of Shape:

# #![allow(unused_variables)]
#
#fn main() {
struct Foo;

trait Shape { fn area(&self) -> f64; }
trait Circle : Shape { fn radius(&self) -> f64; }
impl Shape for Foo {
fn area(&self) -> f64 {
0.0
}
}
impl Circle for Foo {
println!("calling area: {}", self.area());

0.0
}
}

let c = Foo;

#}

In type-parameterized functions, methods of the supertrait may be called on values of subtrait-bound type parameters. Referring to the previous example of trait Circle : Shape:

# #![allow(unused_variables)]
#
#fn main() {
# trait Shape { fn area(&self) -> f64; }
# trait Circle : Shape { fn radius(&self) -> f64; }
fn radius_times_area<T: Circle>(c: T) -> f64 {
// c is both a Circle and a Shape
}

#}

Likewise, supertrait methods may also be called on trait objects.

# trait Shape { fn area(&self) -> f64; }
# trait Circle : Shape { fn radius(&self) -> f64; }
# impl Shape for i32 { fn area(&self) -> f64 { 0.0 } }
# impl Circle for i32 { fn radius(&self) -> f64 { 0.0 } }
# let mycircle = 0i32;
let mycircle = Box::new(mycircle) as Box<Circle>;
let nonsense = mycircle.radius() * mycircle.area();


### Implementations

An implementation is an item that implements a trait for a specific type.

Implementations are defined with the keyword impl.

# #![allow(unused_variables)]
#
#fn main() {
# #[derive(Copy, Clone)]
# struct Point {x: f64, y: f64};
# type Surface = i32;
# struct BoundingBox {x: f64, y: f64, width: f64, height: f64};
# trait Shape { fn draw(&self, Surface); fn bounding_box(&self) -> BoundingBox; }
# fn do_draw_circle(s: Surface, c: Circle) { }
struct Circle {
center: Point,
}

impl Copy for Circle {}

impl Clone for Circle {
fn clone(&self) -> Circle { *self }
}

impl Shape for Circle {
fn draw(&self, s: Surface) { do_draw_circle(s, *self); }
fn bounding_box(&self) -> BoundingBox {
BoundingBox {
x: self.center.x - r,
y: self.center.y - r,
width: 2.0 * r,
height: 2.0 * r,
}
}
}

#}

It is possible to define an implementation without referring to a trait. The methods in such an implementation can only be used as direct calls on the values of the type that the implementation targets. In such an implementation, the trait type and for after impl are omitted. Such implementations are limited to nominal types (enums, structs, trait objects), and the implementation must appear in the same crate as the self type:

# #![allow(unused_variables)]
#
#fn main() {
struct Point {x: i32, y: i32}

impl Point {
fn log(&self) {
println!("Point is at ({}, {})", self.x, self.y);
}
}

let my_point = Point {x: 10, y:11};
my_point.log();

#}

When a trait is specified in an impl, all methods declared as part of the trait must be implemented, with matching types and type parameter counts.

An implementation can take type parameters, which can be different from the type parameters taken by the trait it implements. Implementation parameters are written after the impl keyword.

# #![allow(unused_variables)]
#
#fn main() {
# trait Seq<T> { fn dummy(&self, _: T) { } }
impl<T> Seq<T> for Vec<T> {
/* ... */
}
impl Seq<bool> for u32 {
/* Treat the integer as a sequence of bits */
}

#}

### External blocks

External blocks form the basis for Rust's foreign function interface. Declarations in an external block describe symbols in external, non-Rust libraries.

Functions within external blocks are declared in the same way as other Rust functions, with the exception that they may not have a body and are instead terminated by a semicolon.

Functions within external blocks may be called by Rust code, just like functions defined in Rust. The Rust compiler automatically translates between the Rust ABI and the foreign ABI.

Functions within external blocks may be variadic by specifying ... after one or more named arguments in the argument list:

extern {
fn foo(x: i32, ...);
}


A number of attributes control the behavior of external blocks.

By default external blocks assume that the library they are calling uses the standard C ABI on the specific platform. Other ABIs may be specified using an abi string, as shown here:

// Interface to the Windows API
extern "stdcall" { }


There are three ABI strings which are cross-platform, and which all compilers are guaranteed to support:

• extern "Rust" -- The default ABI when you write a normal fn foo() in any Rust code.
• extern "C" -- This is the same as extern fn foo(); whatever the default your C compiler supports.
• extern "system" -- Usually the same as extern "C", except on Win32, in which case it's "stdcall", or what you should use to link to the Windows API itself

There are also some platform-specific ABI strings:

• extern "cdecl" -- The default for x86_32 C code.
• extern "stdcall" -- The default for the Win32 API on x86_32.
• extern "win64" -- The default for C code on x86_64 Windows.
• extern "sysv64" -- The default for C code on non-Windows x86_64.
• extern "aapcs" -- The default for ARM.
• extern "fastcall" -- The fastcall ABI -- corresponds to MSVC's __fastcall and GCC and clang's __attribute__((fastcall))
• extern "vectorcall" -- The vectorcall ABI -- corresponds to MSVC's __vectorcall and clang's __attribute__((vectorcall))

Finally, there are some rustc-specific ABI strings:

• extern "rust-intrinsic" -- The ABI of rustc intrinsics.
• extern "rust-call" -- The ABI of the Fn::call trait functions.
• extern "platform-intrinsic" -- Specific platform intrinsics -- like, for example, sqrt -- have this ABI. You should never have to deal with it.

The link attribute allows the name of the library to be specified. When specified the compiler will attempt to link against the native library of the specified name.

#[link(name = "crypto")]
extern { }


The type of a function declared in an extern block is extern "abi" fn(A1, ..., An) -> R, where A1...An are the declared types of its arguments and R is the declared return type.

It is valid to add the link attribute on an empty extern block. You can use this to satisfy the linking requirements of extern blocks elsewhere in your code (including upstream crates) instead of adding the attribute to each extern block.